aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2017-11-23Merge tag 'imx-drm-next-2017-10-18' of ↵Dave Airlie3-5/+2
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: various cleanups - Switch to drm_*_get/put() helpers - Use correct parallel-display connector enum: DPI instead of VGA - Remove incorrect unit name from device tree binding documentation example - Remove an unused variable * tag 'imx-drm-next-2017-10-18' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: ipu-dc: Remove unused 'di' variable dt-bindings: fsl-imx-drm: Remove incorrect "@di0" usage drm/imx: parallel-display: use correct connector enum drm/imx: switch to drm_*_get(), drm_*_put() helpers
2017-11-23Merge tag 'drm/tegra/for-4.15-rc1-fixes' of ↵Dave Airlie1-46/+111
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Fixes for v4.15-rc1 This includes an update to the SOR pad clock programming needed because of some changes that went in through the clock tree. * tag 'drm/tegra/for-4.15-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: sor: Reimplement pad clock
2017-11-22drm/edid: Allow HDMI infoframe without VIC or S3DVille Syrjälä10-18/+52
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from 3D to 2D mode in a timely fashion if the source simply stops sending the HDMI infoframe. The suggested workaround is to keep sending the infoframe even when strictly not necessary (ie. no VIC and no S3D). HDMI 1.4 does allow for this behaviour, stating that sending the infoframe is optional in this case. The infoframe was first specified in HDMI 1.4, so in theory sinks predating that may not appreciate us sending an uknown infoframe their way. To avoid regressions let's try to determine if the sink supports the infoframe or not. Unfortunately there's no direct way to do that, so instead we'll just check if we managed to parse any HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the sink will accept the infoframe. Also if the EDID contains the HDMI 2.0 HDMI Forum VSDB we can assume the sink is prepared to receive the infoframe. v2: Fix getting has_hdmi_infoframe from display_info Always fail constructing the infoframe if the display possibly can't handle it Cc: Shashank Sharma <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Laurent Pinchart <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Shashank Sharma <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-21treewide: setup_timer() -> timer_setup() (2 field)Kees Cook1-4/+4
This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook9-33/+28
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: init_timer() -> setup_timer()Kees Cook1-3/+1
This mechanically converts all remaining cases of ancient open-coded timer setup with the old setup_timer() API, which is the first step in timer conversions. This has no behavioral changes, since it ultimately just changes the order of assignment to fields of struct timer_list when finding variations of: init_timer(&t); f.function = timer_callback; t.data = timer_callback_arg; to be converted into: setup_timer(&t, timer_callback, timer_callback_arg); The conversion is done with the following Coccinelle script, which is an improved version of scripts/cocci/api/setup_timer.cocci, in the following ways: - assignments-before-init_timer() cases - limit the .data case removal to the specific struct timer_list instance - handling calls by dereference (timer->field vs timer.field) spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/setup_timer.cocci @fix_address_of@ expression e; @@ init_timer( -&(e) +&e , ...) // Match the common cases first to avoid Coccinelle parsing loops with // "... when" clauses. @match_immediate_function_data_after_init_timer@ expression e, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) @match_immediate_function_data_before_init_timer@ expression e, func, da; @@ ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @match_function_and_data_after_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ... when != func = e2 when != da = e3 ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) @match_function_and_data_before_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) ... when != func = e2 when != da = e3 -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @r1 exists@ expression t; identifier f; position p; @@ f(...) { ... when any init_timer@p(\(&t\|t\)) ... when any } @r2 exists@ expression r1.t; identifier g != r1.f; expression e8; @@ g(...) { ... when any \(t.data\|t->data\) = e8 ... when any } // It is dangerous to use setup_timer if data field is initialized // in another function. @script:python depends on r2@ p << r1.p; @@ cocci.include_match(False) @r3@ expression r1.t, func, e7; position r1.p; @@ ( -init_timer@p(&t); +setup_timer(&t, func, 0UL); ... when != func = e7 -t.function = func; | -t.function = func; ... when != func = e7 -init_timer@p(&t); +setup_timer(&t, func, 0UL); | -init_timer@p(t); +setup_timer(t, func, 0UL); ... when != func = e7 -t->function = func; | -t->function = func; ... when != func = e7 -init_timer@p(t); +setup_timer(t, func, 0UL); ) Signed-off-by: Kees Cook <[email protected]>
2017-11-21drm/vc4: Convert timers to use timer_setup()Kees Cook2-12/+7
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Eric Anholt <[email protected]> Cc: David Airlie <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast Reviewed-by: Eric Anholt <[email protected]>
2017-11-21drm/i915/selftests: Convert timers to use timer_setup()Kees Cook1-3/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: David Airlie <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Chris Wilson <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Acked-by: Jani Nikula <[email protected]>
2017-11-21drm/amdgpu: fix rmmod KCQ disable failed errorWang Hongcheng3-5/+3
If gfx_v8_0_hw_fini is called after amdgpu_ucode_fini_bo, we will hit KCQ disabled failed. Let amdgpu_ucode_fini_bo run after gfx_v8_0_hw_fini. BUG: SWDEV-135547 Reviewed-by: Rex Zhu <[email protected]> Signed-off-by: Wang Hongcheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-11-21drm/amdgpu: fix kernel hang when starting VNC serverXiangliang.Yu1-4/+1
After starting VNC server or running CTS test, kernel will hang and can see below call trace: [961816] INFO: task khugepaged:42 blocked for more than 120 seconds. [968581] Tainted: G OE 4.13.0 #1 [973495] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [980962] khugepaged D 0 42 2 0x00000000 [980967] Call Trace: [980977] __schedule+0x28d/0x890 [980982] schedule+0x36/0x80 [980986] rwsem_down_read_failed+0x139/0x1c0 [980991] ? update_curr+0x100/0x1c0 [981004] call_rwsem_down_read_failed+0x18/0x30 [981007] down_read+0x20/0x40 [981012] khugepaged_scan_mm_slot+0x78/0x1ac0 [981018] ? __switch_to+0x23e/0x4a0 [981022] ? finish_task_switch+0x79/0x240 [981026] khugepaged+0x146/0x480 [981031] ? remove_wait_queue+0x60/0x60 [981035] kthread+0x109/0x140 [981037] ? khugepaged_scan_mm_slot+0x1ac0/0x1ac0 [981039] ? kthread_park+0x60/0x60 [981044] ret_from_fork+0x25/0x30 After checking code and found 'commit b72cf4fca2bb7 ("drm/amdgpu: move taking mmap_sem into get_user_pages v2")' forget to drop one case of up_read. Signed-off-by: Xiangliang.Yu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-11-21Merge airlied/drm-next into drm-misc-nextDaniel Vetter740-49877/+48270
Bake in the conflict between the drm_print.h extraction and the addition of DRM_DEBUG_LEASES since we lost it a few too many times. Also fix a new use of drm_plane_helper_check_state in msm to follow Ville's conversion in commit a01cb8ba3f6282934cff65e89ab36b18b14cbe27 Author: Ville Syrjälä <[email protected]> Date: Wed Nov 1 22:16:19 2017 +0200 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c Acked-by: Ville Syrjälä <[email protected]> Signed-off-by: Daniel Vetter <[email protected]>
2017-11-21drm/i915: Fix init_clock_gating for resumeVille Syrjälä1-0/+1
Moving the init_clock_gating() call from intel_modeset_init_hw() to intel_modeset_gem_init() had an unintended effect of not applying some workarounds on resume. This, for example, cause some kind of corruption to appear at the top of my IVB Thinkpad X1 Carbon LVDS screen after hibernation. Fix the problem by explicitly calling init_clock_gating() from the resume path. I really hope this doesn't break something else again. At least the problems reported at https://bugs.freedesktop.org/show_bug.cgi?id=103549 didn't make a comeback, even after a hibernate cycle. v2: Reorder the init_clock_gating vs. modeset_init_hw to match the display reset path (Rodrigo) Cc: [email protected] Cc: Chris Wilson <[email protected]> Cc: Rodrigo Vivi <[email protected]> Fixes: 6ac43272768c ("drm/i915: Move init_clock_gating() back to where it was") Reviewed-by: Rodrigo Vivi <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Ville Syrjälä <[email protected]> (cherry picked from commit 675f7ff35bd256e65d3d0f52718d8babf5d1002a) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIMChris Wilson1-2/+4
Commit 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") tried to fixup the check_flush_dependency warning for hitting i915_gem_userptr_mn_invalidate_range_start from within the shrinker, but I failed to notice userptr has 2 similarly named workqueues. I marked up i915-userptr-acquire as WQ_MEM_RECLAIM whereas we only wait upon i915-userptr-release from inside the reclaim paths. [62530.869510] workqueue: PF_MEMALLOC task 7983(gem_shrink) is flushing !WQ_MEM_RECLAIM i915-userptr-release: (null) [62530.869515] ------------[ cut here ]------------ [62530.869519] WARNING: CPU: 1 PID: 7983 at kernel/workqueue.c:2434 check_flush_dependency+0x7f/0x110 [62530.869519] Modules linked in: pegasus mii ip6table_filter ip6_tables bnep iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hda_core snd_hwdep kvm snd_pcm irqbypass snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul 8250_dw ghash_clmulni_intel snd_seq pcbc snd_seq_device snd_timer btusb aesni_intel btrtl btbcm aes_x86_64 iwlwifi btintel crypto_simd glue_helper cryptd bluetooth snd intel_cstate input_leds idma64 intel_rapl_perf ecdh_generic serio_raw soundcore cfg80211 wmi_bmof virt_dma intel_lpss_pci intel_lpss acpi_als kfifo_buf industrialio winbond_cir soc_button_array rc_core spidev tpm_crb intel_hid acpi_pad mac_hid sparse_keymap [62530.869546] parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid i915 i2c_algo_bit prime_numbers drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp pps_core libahci drm wmi video i2c_hid hid [62530.869557] CPU: 1 PID: 7983 Comm: gem_shrink Tainted: G U W L 4.14.0-rc8-drm-tip-ww45-commit-1342299+ #1 [62530.869558] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X098.A00.1707301945 07/30/2017 [62530.869559] task: ffffa1049dbeec80 task.stack: ffffae7d05c44000 [62530.869560] RIP: 0010:check_flush_dependency+0x7f/0x110 [62530.869561] RSP: 0018:ffffae7d05c473a0 EFLAGS: 00010286 [62530.869562] RAX: 000000000000006e RBX: ffffa1049540f400 RCX: ffffffffa3e55788 [62530.869562] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202 [62530.869563] RBP: ffffae7d05c473c0 R08: 000000000000006e R09: 000000000038bb0e [62530.869563] R10: 0000000000000000 R11: 000000000000006e R12: ffffa1049dbeec80 [62530.869564] R13: 0000000000000000 R14: 0000000000000000 R15: ffffae7d05c473e0 [62530.869565] FS: 00007f621b129880(0000) GS:ffffa1050b240000(0000) knlGS:0000000000000000 [62530.869566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [62530.869566] CR2: 00007f6214400000 CR3: 0000000353a17003 CR4: 00000000003606e0 [62530.869567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [62530.869567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [62530.869568] Call Trace: [62530.869570] flush_workqueue+0x115/0x3d0 [62530.869573] ? wake_up_process+0x15/0x20 [62530.869596] i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869614] ? i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869616] __mmu_notifier_invalidate_range_start+0x55/0x80 [62530.869618] try_to_unmap_one+0x791/0x8b0 [62530.869620] ? call_rwsem_down_read_failed+0x18/0x30 [62530.869622] rmap_walk_anon+0x10b/0x260 [62530.869624] rmap_walk+0x48/0x60 [62530.869625] try_to_unmap+0x93/0xf0 [62530.869626] ? page_remove_rmap+0x2a0/0x2a0 [62530.869627] ? page_not_mapped+0x20/0x20 [62530.869629] ? page_get_anon_vma+0x90/0x90 [62530.869630] ? invalid_mkclean_vma+0x20/0x20 [62530.869631] migrate_pages+0x946/0xaa0 [62530.869633] ? __ClearPageMovable+0x10/0x10 [62530.869635] ? isolate_freepages_block+0x3c0/0x3c0 [62530.869636] compact_zone+0x22f/0x970 [62530.869638] compact_zone_order+0xa3/0xd0 [62530.869640] try_to_compact_pages+0x1a5/0x2a0 [62530.869641] ? try_to_compact_pages+0x1a5/0x2a0 [62530.869643] __alloc_pages_direct_compact+0x50/0x110 [62530.869644] __alloc_pages_slowpath+0x4da/0xf30 [62530.869646] __alloc_pages_nodemask+0x262/0x280 [62530.869648] alloc_pages_vma+0x165/0x1e0 [62530.869649] shmem_alloc_hugepage+0xd0/0x130 [62530.869651] ? __radix_tree_insert+0x45/0x230 [62530.869652] ? __vm_enough_memory+0x29/0x130 [62530.869654] shmem_alloc_and_acct_page+0x10d/0x1e0 [62530.869655] shmem_getpage_gfp+0x426/0xc00 [62530.869657] shmem_fault+0xa0/0x1e0 [62530.869659] ? file_update_time+0x60/0x110 [62530.869660] __do_fault+0x1e/0xc0 [62530.869661] __handle_mm_fault+0xa35/0x1170 [62530.869662] handle_mm_fault+0xcc/0x1c0 [62530.869664] __do_page_fault+0x262/0x4f0 [62530.869666] do_page_fault+0x2e/0xe0 [62530.869667] page_fault+0x22/0x30 [62530.869668] RIP: 0033:0x404335 [62530.869669] RSP: 002b:00007fff7829e420 EFLAGS: 00010216 [62530.869670] RAX: 00007f6210400000 RBX: 0000000000000004 RCX: 0000000000b80000 [62530.869670] RDX: 0000000000002e01 RSI: 0000000000008000 RDI: 0000000000000004 [62530.869671] RBP: 0000000000000019 R08: 0000000000000002 R09: 0000000000000000 [62530.869671] R10: 0000000000000559 R11: 0000000000000246 R12: 0000000008000000 [62530.869672] R13: 00000000004042f0 R14: 0000000000000004 R15: 000000000000007e [62530.869673] Code: 00 8b b0 18 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 c0 06 00 00 4d 89 f0 48 c7 c7 40 c0 c8 a3 c6 05 68 c5 e8 00 01 e8 c2 68 04 00 <0f> ff 4d 85 ed 74 18 49 8b 45 20 48 8b 70 08 8b 86 00 01 00 00 [62530.869691] ---[ end trace 01e01ad0ff5781f8 ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103739 Fixes: 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") Signed-off-by: Chris Wilson <[email protected]> Cc: Michał Winiarski <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Matthew Auld <[email protected]> (cherry picked from commit 41729bf2248bc8593e5103d43974079cc269524c) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/i915: Clear breadcrumb node when cancelling signalingChris Wilson1-0/+1
When we call intel_engine_cancel_signaling() to stop reporting when a request is completed via an asynchronous signal, we remove that request from the breadcrumb wait queue. However, we may be concurrently processing that request in the signaler itself, the actual operations on the request's node itself are serialised but we do not actually clear the waiter after removing it from the tree allowing both parties to attempt to do so and corrupting the rbtree. (Previously removing from the breadcrumb wait queue could only be done on behalf of i915_wait_request, so this race could not happen). Reported-by: "He, Bo" <[email protected]> Fixes: 9eb143bbec7d ("drm/i915: Allow a request to be cancelled") Signed-off-by: Chris Wilson <[email protected]> Cc: "He, Bo" <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Michał Winiarski <[email protected]> Cc: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]> (cherry picked from commit c534612e780c4a2c8ef5bfc11583c7d58436baca) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/i915/gvt: ensure -ve return value is handled correctlyColin Ian King1-1/+1
An earlier fix changed the return type from find_bb_size however the integer return is being assigned to a unsigned int so the -ve error check will never be detected. Make bb_size an int to fix this. Detected by CoverityScan CID#1456886 ("Unsigned compared against 0") Fixes: 1e3197d6ad73 ("drm/i915/gvt: Refine error handling for perform_bb_shadow") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> (cherry picked from commit 24f8a29af4afe7c53e08f4afa0c3fa9eb3791b89) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/i915: Re-register PMIC bus access notifier on runtime resumeHans de Goede3-0/+9
intel_uncore_suspend() unregisters the uncore code's PMIC bus access notifier and gets called on both normal and runtime suspend. intel_uncore_resume_early() re-registers the notifier, but only on normal resume. Add a new intel_uncore_runtime_resume() function which only re-registers the notifier and call that on runtime resume. Cc: [email protected] Reported-by: Imre Deak <[email protected]> Reviewed-by: Imre Deak <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bedf4d79c3654921839b62246b0965ddb308b201) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/i915: Fix false-positive assert_rpm_wakelock_held in ↵Hans de Goede1-0/+7
i915_pmic_bus_access_notifier v2 assert_rpm_wakelock_held is triggered from i915_pmic_bus_access_notifier even though it gets unregistered on (runtime) suspend, this is caused by a race happening under the following circumstances: intel_runtime_pm_put does: atomic_dec(&dev_priv->pm.wakeref_count); pm_runtime_mark_last_busy(kdev); pm_runtime_put_autosuspend(kdev); And pm_runtime_put_autosuspend calls intel_runtime_suspend from a workqueue, so there is ample of time between the atomic_dec() and intel_runtime_suspend() unregistering the notifier. If the notifier gets called in this windowd assert_rpm_wakelock_held falsely triggers (at this point we're not runtime-suspended yet). This commit adds disable_rpm_wakeref_asserts and enable_rpm_wakeref_asserts calls around the intel_uncore_forcewake_get(FORCEWAKE_ALL) call in i915_pmic_bus_access_notifier fixing the false-positive WARN_ON. Changes in v2: -Reword comment explaining why disabling the wakeref asserts is ok and necessary Cc: [email protected] Reported-by: FKr <[email protected]> Reviewed-by: Imre Deak <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ce30560c80dead91e98a03d90fb8791e57a9b69d) Signed-off-by: Jani Nikula <[email protected]>
2017-11-21drm/sti: Handle return value of platform_get_irq_bynameArvind Yadav1-0/+5
platform_get_irq_byname() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: Benjamin Gaignard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/f4b4f1b2cfa5e302ef7ffad4e3efb0d3147709d3.1510914877.git.arvind.yadav.cs@gmail.com
2017-11-20drm/amdgpu: don't skip attributes when powerplay is enabledAlex Deucher1-0/+4
The function checks non-powerplay structures so regressed when the pp_enabled check was removed. This should ideally be implemented similarly for powerplay. Fixes: 6d07fe7bcae57 ("drm/amdgpu: delete pp_enable in adev") Tested-by: Dieter Nützel <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-11-20drm/amd/pp: fix typecast error in powerplay.Rex Zhu1-2/+2
resulted in unexpected data truncation Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2017-11-20drm/vc4: Add support for NV21 and NV61.Dave Stevenson1-0/+10
NV12 (YUV420 2 plane) and NV16 (YUV422 2 plane) were supported, but NV21 and NV61 (same but with Cb and Cr swapped) weren't. Add them. Signed-off-by: Dave Stevenson <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1f50799525e3401551dff2b0b2828b9ab892f75f.1510841336.git.dave.stevenson@raspberrypi.org
2017-11-20drm/vc4: Use .pixel_order instead of custom .flip_cbcrDave Stevenson1-12/+8
The hardware has enums for altering the Cr and Cb order, so use this instead of having a flag which swaps the order the pointers are presented to the hardware (that only worked for 3 plane formats anyway). Explicitly sets .pixel_order in each case, rather than relying on then default XYCBCR order being a value 0. Signed-off-by: Dave Stevenson <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org
2017-11-20drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888Dave Stevenson1-0/+8
Filling out the list of supported formats based on those the hardware can support. Signed-off-by: Dave Stevenson <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b551205d1c33fa49eef2c33ed2d60c5339b2f299.1510841336.git.dave.stevenson@raspberrypi.org
2017-11-20drm: Move drm_plane_helper_check_state() into drm_atomic_helper.cVille Syrjälä15-159/+162
drm_plane_helper_check_update() isn't a transitional helper, so let's rename it to drm_atomic_helper_check_plane_state() and move it into drm_atomic_helper.c. v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Cc: Daniel Vetter <[email protected]> Suggested-by: Daniel Vetter <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]>
2017-11-20drm: Check crtc_state->enable rather than crtc->enabled in ↵Ville Syrjälä14-38/+50
drm_plane_helper_check_state() drm_plane_helper_check_state() is supposed to do things the atomic way, so it should not be inspecting crtc->enabled. Rather we should be looking at crtc_state->enable. We have a slight complication due to drm_plane_helper_check_update() reusing drm_plane_helper_check_state() for non-atomic drivers. Thus we'll have to pass the crtc_state in manally and construct a fake crtc_state in drm_plane_helper_check_update(). v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]>
2017-11-20drm/vmwgfx: Try to fix plane clippingVille Syrjälä1-10/+13
Try to fix the code to actually clip the plane to the crtc bounds instead of the user provided crtc coordinates (which would be a no-op since those are exactly the coordinates before clipping). Cc: VMware Graphics <[email protected]> Cc: Sinclair Yeh <[email protected]> Cc: Thomas Hellstrom <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2017-11-20drm/vmwgfx: Use drm_plane_helper_check_state()Ville Syrjälä1-14/+3
Atomic drivers have no reason to use drm_plane_helper_check_update() instead of drm_plane_helper_check_state(). So let's switch over. Cc: VMware Graphics <[email protected]> Cc: Sinclair Yeh <[email protected]> Cc: Thomas Hellstrom <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2017-11-20drm/vmwgfx: Remove bogus crtc coords vs fb size checkVille Syrjälä1-6/+0
Throw away the bugs crtc coords vs. fb size check. Crtc coords don't define the viewport inside the fb, that's a job for the src coords, which have been checked by the core already. Cc: VMware Graphics <[email protected]> Cc: Sinclair Yeh <[email protected]> Cc: Thomas Hellstrom <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2017-11-20drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding supportJyri Sarha5-380/+0
This patch removes DRM_TILCDC_SLAVE_COMPAT option for supporting the obsolete "ti,tilcdc,slave" device tree binding. The new of_graph based binding - that is widely used in other drm driver too - has been supported since Linux v4.2. Maintaining the the backwards dts conversion code in the DRM_TILCDC_SLAVE_COMPAT has become a nuisance for the device/of development so the we decided to drop it after Linux v4.14, the 2017 LTS. Signed-off-by: Jyri Sarha <[email protected]> Acked-by: Rob Herring <[email protected]>
2017-11-20drm/tegra: sor: Reimplement pad clockThierry Reding1-46/+111
The current implementation of the pad clock isn't quite correct. This has the side-effect of being incompatible with the implementation for Tegra186 (provided by the BPMP) and therefore would require a massive change to the driver to cope with the differences. Instead, simply do what Tegra186 does and add some code to fallback to the old behaviour for existing device trees. Signed-off-by: Thierry Reding <[email protected]>
2017-11-20gpu: gma500: remove unneeded DRIVER_LICENSE #defineGreg Kroah-Hartman2-2/+1
There is no need to #define the license of the driver, just put it in the MODULE_LICENSE() line directly as a text string. This allows tools that check that the module license matches the source code license to work properly, as there is no need to unwind the unneeded dereference, especially when the string is defined in a .h file far away from the .c file it is used in. Cc: Patrik Jakobsson <[email protected]> Cc: David Airlie <[email protected]> Reported-by: Philippe Ombredanne <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Philippe Ombredanne <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-20drm: don't link DP aux i2c adapter to the hardware device nodeLucas Stach1-1/+0
The i2c adapter on DP AUX is purely a software construct. Linking it to the device node of the parent device is wrong, as it leads to 2 devices sharing the same device node, which is bad practice, as well as the i2c trying to populate children of the i2c adapter by looking at the child device nodes of the parent device. Signed-off-by: Lucas Stach <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-20Merge tag 'drm-fsl-dcu-fixes-for-v4.15' of ↵Dave Airlie2-7/+1
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next Some cleanup/fixes, some noticed during testing of Noralf Trønnes rework of the suspend/resume helper. He will rebase the patchset ontop of this. * tag 'drm-fsl-dcu-fixes-for-v4.15' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() drm/fsl-dcu: avoid disabling pixel clock twice on suspend drm/fsl-dcu: Don't set connector DPMS property
2017-11-20Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie11-51/+87
into drm-next Misc fixes for 4.15. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/amd/amdgpu: if visible VRAM allocation fail, fall back to invisible try again drm/amd/amdgpu: Fix wave mask in amdgpu_debugfs_wave_read() (v2) drm/amdgpu: make AMDGPU_VA_RESERVED_SIZE 64bit drm/amdgpu/gfx9: implement wave VGPR reading drm/amdgpu: Add common golden settings for GFX9 drm/amd/powerplay: fix copy-n-paste error on vddci_buf index drm/amdgpu: Fix null pointer issue in amdgpu_cs_wait_any_fence drm/amdgpu: Remove check which is not valid for certain VBIOS
2017-11-17drm/i915: Update DRIVER_DATE to 20171117Rodrigo Vivi1-2/+2
Signed-off-by: Rodrigo Vivi <[email protected]>
2017-11-17Merge tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds366-75/+132365
Pull amdgpu DC display code for Vega from Dave Airlie: "This is the pull request for the AMD DC (display code) layer which is a requirement to program the display engines on the new Vega and Raven based GPUs. It also contains support for all amdgpu supported GPUs (CIK, VI, Polaris), which has to be enabled. It is also a kms atomic modesetting compatible driver (unlike the current in-tree display code). I've kept it separate from drm-next because it may have some things that cause you to reject it. Background story: AMD have an internal team creating a shared OS codebase for display at hw bring up time using information from their hardware teams. This process doesn't lead to the most Linux friendly/looking code but we have worked together on cleaning a lot of it up and dealing with sparse/smatch/checkpatch, and having their team internally adhere to Linux coding standards. This tree is a complete history rebased since they started opening it, we decided not to squash it down as the history may have some value. Some of the commits therefore might not reach kernel standards, and we are steadily training people in AMD to better write commit msgs. There is a major bunch of generated bandwidth calculation and verification code that comes from their hardware team. On Vega and before this is float calculations, on Raven (DCN10) this is double based. They do the required things to do FP in the kernel, and I could understand this might raise some issues. Rewriting the bandwidth would be a major undertaken in reverification, it's non-trivial to work out if a display can handle the complete set of mode information thrown at it. Future story: There is a TODO list with this, and it address most of the remaining things that would be nice to refine/remove. The DCN10 code is still under development internally and they push out a lot of patches quite regularly and are supporting this code base with their display team. I think we've reached the point where keeping it out of tree is going to motivate distributions to start carrying the code, so I'd prefer we get it in tree. I think this code is slightly better than STAGING quality but not massively so, I'd really like to see that float/double magic gone and fixed point used, but AMD don't seem to think the accuracy and revalidation of the code is worth the effort" * tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux: (1110 commits) drm/amd/display: fix MST link training fail division by 0 drm/amd/display: Fix formatting for null pointer dereference fix drm/amd/display: Remove dangling planes on dc commit state drm/amd/display: add flip_immediate to commit update for stream drm/amd/display: Miss register MST encoder cbs drm/amd/display: Fix warnings on S3 resume drm/amd/display: use num_timing_generator instead of pipe_count drm/amd/display: use configurable FBC option in dm drm/amd/display: fix AZ clock not enabled before program AZ endpoint amdgpu/dm: Don't use DRM_ERROR in amdgpu_dm_atomic_check amd/display: Fix potential null dereference in dce_calcs.c amdgpu/dm: Remove unused forward declaration drm/amdgpu: Remove unused dc_stream from amdgpu_crtc amdgpu/dc: Fix double unlock in amdgpu_dm_commit_planes amdgpu/dc: Fix missing null checks in amdgpu_dm.c amdgpu/dc: Fix potential null dereferences in amdgpu_dm.c amdgpu/dc: fix more indentation warnings amdgpu/dc: handle allocation failures in dc_commit_planes_to_stream. amdgpu/dc: fix indentation warning from smatch. amdgpu/dc: fix non-ansi function decls. ...
2017-11-17Merge branch 'work.get_user_pages_fast' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull get_user_pages_fast() conversion from Al Viro: "A bunch of places switched to get_user_pages_fast()" * 'work.get_user_pages_fast' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ceph: use get_user_pages_fast() pvr2fs: use get_user_pages_fast() atomisp: use get_user_pages_fast() st: use get_user_pages_fast() via_dmablit(): use get_user_pages_fast() fsl_hypervisor: switch to get_user_pages_fast() rapidio: switch to get_user_pages_fast() vchiq_2835_arm: switch to get_user_pages_fast()
2017-11-17Revert "drm/radeon: dont switch vt on suspend"Alex Deucher1-1/+0
Fixes distorted colors on some cards on resume from suspend. This reverts commit b9729b17a414f99c61f4db9ac9f9ed987fa0cbfe. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98832 Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99163 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=107001 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2017-11-17drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fenceRoger He1-1/+1
Fixes an oops in amdgpu_cs_wait_any_fence. Reviewed-by: Christian König <[email protected]> Reviewed-by: Chunming Zhou <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-11-17Merge branch 'misc.compat' of ↵Linus Torvalds3-61/+48
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat and uaccess updates from Al Viro: - {get,put}_compat_sigset() series - assorted compat ioctl stuff - more set_fs() elimination - a few more timespec64 conversions - several removals of pointless access_ok() in places where it was followed only by non-__ variants of primitives * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) coredump: call do_unlinkat directly instead of sys_unlink fs: expose do_unlinkat for built-in callers ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs() ipmi: get rid of pointless access_ok() pi433: sanitize ioctl cxlflash: get rid of pointless access_ok() mtdchar: get rid of pointless access_ok() r128: switch compat ioctls to drm_ioctl_kernel() selection: get rid of field-by-field copyin VT_RESIZEX: get rid of field-by-field copyin i2c compat ioctls: move to ->compat_ioctl() sched_rr_get_interval(): move compat to native, get rid of set_fs() mips: switch to {get,put}_compat_sigset() sparc: switch to {get,put}_compat_sigset() s390: switch to {get,put}_compat_sigset() ppc: switch to {get,put}_compat_sigset() parisc: switch to {get,put}_compat_sigset() get_compat_sigset() get rid of {get,put}_compat_itimerspec() io_getevents: Use timespec64 to represent timeouts ...
2017-11-17drm/i915: Add a policy note for removing workaroundsChris Wilson1-0/+5
Rodrigo gave a persuasive argument for keeping workarounds: that they serve as a good guide for the bring up of the next generation. Not only do workarounds persist into the early revisions, they show where the workarounds were previously added to the code flow and sometimes the old workarounds have an explanation that give insight into their wider implications. Based on his suggestion, document the policy that we want to keep the workarounds from the current generation to guide the next. Older preproduction workarounds we still want to remove to keep the code clean. Signed-off-by: Chris Wilson <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Jani Nikula <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]>
2017-11-17drm/i915/selftests: Report ENOMEM clearly for an allocation failureChris Wilson1-10/+26
If we can not run the drunk_hole test because we couldn't allocate the memory for the permutation array (even after we tried trimming the size), report a clear ENOMEM. Similary, if we are asked to operate on a hole too small for ourselves, make it skip quietly. v2: Avoid malloc(0) since that returns ZERO_SIZE_PTR not NULL. v3: Fixup similar construction for lowlevel_hole v4: Use u64 >> 1 to avoid 64b div. Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"Radhakrishna Sripada2-15/+0
This reverts commit 8f067837c4b713ce2e69be95af7b2a5eb3bd7de8. HSD says "WA withdrawn. It was causing corruption with some images. WA is not strictly necessary since this bug just causes loss of FBC compression with some sizes and images, but doesn't break anything." Fixes: 8f067837c4b7 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk") Cc: Rodrigo Vivi <[email protected]> Signed-off-by: Radhakrishna Sripada <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17drm/i915: Calculate g4x intermediate watermarks correctlyMaarten Lankhorst1-7/+20
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. CXSR must always be disabled in the intermediate case for modesets, else we get a WARN for vblank wait timeout. Also rename crtc_state to new_crtc_state, to distinguish it from the old state. Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]>
2017-11-17drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.Maarten Lankhorst1-6/+18
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. CXSR must always be disabled in the intermediate case for modesets, else we get a WARN for vblank wait timeout. Also rename crtc_state to new_crtc_state, to distinguish it from the old state. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Changes since v2: - Always unset cxsr during modeset. Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]>
2017-11-17drm/panel: simple: Add Mitsubishi AA070MC01 panel supportLukasz Majewski1-0/+35
The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector). Signed-off-by: Lukasz Majewski <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17drm/panel: simple: Add Tianma TM070RVHG71 panel supportLukasz Majewski1-0/+27
The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected via LVDS and can be supported by the simple-panel binding. Signed-off-by: Lukasz Majewski <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17drm/i915: Pass crtc_state to ips toggle functions, v2Maarten Lankhorst4-17/+21
Changes since v1: - Only pass crtc_state, not crtc. Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]>
2017-11-17drm/i915: Pass idle crtc_state to intel_dp_sink_crcMaarten Lankhorst3-13/+30
IPS can only be enabled if the primary plane is visible, so first make sure sw state matches hw state by waiting for hw_done. After this pass crtc_state to intel_dp_sink_crc() so that can be used, instead of using legacy pointers. Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]>
2017-11-17drm/i915: Enable FIFO underrun reporting after initial fastset, v4.Maarten Lankhorst1-2/+15
The firmware may have set up the pipe correctly, but the FIFO underrun and CRC interrupts are likely not enabled. This resulted in debugfs_test.read_all_entries failing on haswell, because of a timeout when reading the crc debugfs entry. Solve this by enabling FIFO underrun reporting after the initial fastset, which lets interrupts be generated as expected. Changes since v1: - Always enable CPU FIFO underrun reporting for >GEN2, and handle GEN2 correctly. Changes since v2: - Remove unneeded HAS_DDI, simplify GEN2 case. Changes since v3: - Use intel_crtc_pch_transcoder to determine pch transcoder for underruns. (Ville) - Remove crtc->config dereference in intel_crtc_pch_transcoder. (Ville) Testcase: debugfs_test.read_all_entries Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.