| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following bug appeared in the MCDE driver/display
initialization during the recent merge window.
First the place we call drm_fbdev_generic_setup() in the
wrong place: this needs to be called AFTER calling
drm_dev_register() else we get this splat:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8
mcde a0350000.mcde: Device has not been registered.
Modules linked in:
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14)
[<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0)
[<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0)
[<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8)
[<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8)
[<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160)
[<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4)
(...)
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As of commit 4dc55525b095 ("drm: plane: Verify that no or all planes
have a zpos property") a warning is emitted if there's a mix of planes
with and without a zpos property.
On Tegra, cursor planes are always composited on top of all other
planes, which is why they never had a zpos property attached to them.
However, since the composition order is fixed, this is trivial to
remedy by simply attaching an immutable zpos property to them.
v3: do not hardcode zpos for overlay planes used as cursor (Dmitry)
v2: hardcode cursor plane zpos to 255 instead of 0 (Ville)
Reported-by: Jonathan Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Currently when a host1x device driver is unregistered, it is not
detached from the host1x controller, which means that the device
will stay around and when the driver is registered again, it may
bind to the old, stale device rather than the new one that was
created from scratch upon driver registration. This in turn can
cause various weird crashes within the driver core because it is
confronted with a device that was already deleted.
Fix this by detaching the driver from the host1x controller when
it is unregistered. This ensures that the deleted device also is
no longer present in the device list that drivers will bind to.
Reported-by: Sowjanya Komatineni <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Tested-by: Sowjanya Komatineni <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
display-hub driver explicitly register the display controller children.
Signed-off-by: Thierry Reding <[email protected]>
|
|
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
host1x driver explicitly register its children.
Signed-off-by: Thierry Reding <[email protected]>
|
|
Though the unconditional enable/disable code is not a final solution,
we don't want to run into a NULL pointer situation when window group
doesn't link to its DC parent if the DC is disabled in Device Tree.
So this patch simply adds a check to make sure that window group has
a valid parent before running into tegra_windowgroup_enable/disable.
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
host1x_debug_init() must be reverted in an error handling path.
This is already fixed in the remove function since commit 44156eee91ba
("gpu: host1x: Clean up debugfs on removal")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
For all ddi, encoder->type holds output type as ddi,
assigning it to individual o/p types is no more valid.
Fixes: 362bfb995b78 ("drm/i915/tgl: Add DKL PHY vswing table for HDMI")
v2: Rebase, no functional change.
Signed-off-by: Vandita Kulkarni <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Uma Shankar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 94641eb6c69682884abbecf22fe5b7c185af6a06)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Atm, hotplug interrupts on TypeC ports are left enabled after detecting
an interrupt storm, fix this.
Reported-by: Kunal Joshi <[email protected]>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/351
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/1964
Cc: Kunal Joshi <[email protected]>
Cc: [email protected]
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 587a87b9d7e94927edcdea018565bc1939381eb1)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 2bcefd0d263ab4a72f0d61921ae6b0dc81606551)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 806a45c0838d253e306a6384057e851b65d11099)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c3b93a943f2c9ee4a106db100a2fc3b2f126bfc5)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 7331c356b6d2d8a01422cacab27478a1dba9fa2a)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 19f1f627b33385a2f0855cbc7d33d86d7f4a1e78)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
v2: Leave HSW_SCRATCH to set an explicit value, not or in our disable
bit.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2011
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f93ec5fb563779bda4501890b1854526de58e0f1)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:
[ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[ 871.019212] mce: [Hardware Error]: TSC 135a261fe61
[ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[ 871.019212] Kernel panic - not syncing: Fatal machine check
[ 871.019212] Kernel Offset: disabled
Bspec: 4287
Fixes: fa37a213275c ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <[email protected]>
Cc: Uma Shankar <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c980216dd224c52b5c70172753c209b653d84958)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
In commit 5ba32c7be81e ("drm/i915/execlists: Always force a context
reload when rewinding RING_TAIL"), we placed the check for rewinding a
context on actually submitting the next request in that context. This
was so that we only had to check once, and could do so with precision
avoiding as many forced restores as possible. For example, to ensure
that we can resubmit the same request a couple of times, we include a
small wa_tail such that on the next submission, the ring->tail will
appear to move forwards when resubmitting the same request. This is very
common as it will happen for every lite-restore to fill the second port
after a context switch.
However, intel_ring_direction() is limited in precision to movements of
upto half the ring size. The consequence being that if we tried to
unwind many requests, we could exceed half the ring and flip the sense
of the direction, so missing a force restore. As no request can be
greater than half the ring (i.e. 2048 bytes in the smallest case), we
can check for rollback incrementally. As we check against the tail that
would be submitted, we do not lose any sensitivity and allow lite
restores for the simple case. We still need to double check upon
submitting the context, to allow for multiple preemptions and
resubmissions.
Fixes: 5ba32c7be81e ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: <[email protected]> # v5.4+
Reviewed-by: Bruce Chang <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit e36ba817fa966f81fb1c8d16f3721b5a644b2fa9)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Setting ln0 similar to ln1
Fixes: 3b51be4e4061b ("drm/i915/tc: Update DP_MODE programming")
Cc: <[email protected]> # v5.5+
Signed-off-by: Khaled Almahallawy <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4f72a8ee819d57d7329d88f487a2fc9b45153177)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
We have a I915_REQUEST_NOPREEMPT flag that we set when we must prevent
the HW from preempting during the course of this request. We need to
honour this flag and protect the HW even if we have a heartbeat request,
or other maximum priority barrier, pending. As such, restrict the
timeslicing check to avoid preempting into the topmost priority band,
leaving the unpreemptable requests in blissful peace running
uninterrupted on the HW.
v2: Set the I915_PRIORITY_BARRIER to be less than
I915_PRIORITY_UNPREEMPTABLE so that we never submit a request
(heartbeat or barrier) that can legitimately preempt the current
non-premptable request.
Fixes: 2a98f4e65bba ("drm/i915: add infrastructure to hold off preemption on a request")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit b72f02d78e4f257761ed003444ae52083f962076)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Since we temporarily disable the heartbeat and restore back to the
default value, we can use the stored defaults on the engine and avoid
using a local.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3a230a554dbbc6cd5016cf1b56ee77cfcd48c7d8)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
gcc-9 gets confused by the code flow in check_dirty_whitelist:
drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist':
drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I could not figure out a good way to do this in a way that gcc
understands better, so initialize the variable to zero, as last
resort.
Fixes: aee20aaed887 ("drm/i915: Implement read-only support in whitelist selftest")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit cc649a9eafc1ef5c40db023084cb94422d08aa84)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Conditional spinlocks make it hard for gcc and for lockdep to
follow the code flow. This one causes a warning with at least
gcc-9 and higher:
In file included from include/linux/irq.h:14,
from drivers/gpu/drm/i915/i915_pmu.c:7:
drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample':
include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
289 | _raw_spin_unlock_irqrestore(lock, flags); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here
288 | unsigned long flags;
| ^~~~~
Split out the part between the locks into a separate function
for readability and to let the compiler figure out what the
logic actually is.
Fixes: d79e1bd676f0 ("drm/i915/pmu: Only use exclusive mmio access for gen7")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 6ec81b82732e2b4a5ac0853fd33919ff1ca94238)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
It was quite the oversight to only factor in the normal queue to decide
the timeslicing switch priority. By leaving out the next virtual request
from the priority decision, we would not timeslice the current engine if
there was an available virtual request.
Testcase: igt/gem_exec_balancer/sliced
Fixes: 3df2deed411e ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 6ad249ba59badc7ff157d4db1f835748f0e2c9b6)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "fence" with increased
refcnt.
When ttm_bo_add_move_fence() returns, local variable "fence" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the
function forgets to decrease the refcnt increased by dma_fence_get(),
causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/370221/
Signed-off-by: Christian König <[email protected]>
|
|
ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "moving" with increased
refcnt.
When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in several exception handling paths
of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as
"err" equals to -EBUSY, the function forgets to decrease the refcnt
increased by dma_fence_get(), causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/370219/
Signed-off-by: Christian König <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This week I started seeing GPU crashes on my DragonBoard 845c
which I narrowed down to being caused by commit ccac7ce373c1
("drm/msm: Refactor address space initialization").
Looking through the patch, Jordan and I couldn't find anything
obviously wrong, so I ended up breaking that change up into a
number of smaller logical steps so I could figure out which part
was causing the trouble.
Ends up, visually counting 'f's is hard, esp across a number
of lines:
0xfffffff != 0xffffffff
This patch corrects the end value we pass in to
msm_gem_address_space_create() in
adreno_iommu_create_address_space() so that it matches the value
used before the problematic patch landed.
With this change, I no longer see the GPU crashes that were
affecting me.
Cc: Shawn Guo <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Jordan Crouse <[email protected]>
Cc: [email protected]
Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
In the current implementation, mutex initialization
for encoder mutex locks are done during encoder
setup. This can lead to scenarios where the lock
is used before it is initialized. Move mutex_init
to dpu_encoder_init to avoid this.
Signed-off-by: Krishna Manikandan <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
Fix to return negative error code -ENOMEM with the use of
ERR_PTR from dpu_encoder_init.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Chen Tao <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
In function msm_submitqueue_create, the queue is a local
variable, in return -EINVAL branch, queue didn`t add to ctx`s
list yet, and also didn`t kfree, this maybe bring in potential
memleak.
Signed-off-by: Bernard Zhao <[email protected]>
[trivial commit msg fixup]
Signed-off-by: Rob Clark <[email protected]>
|
|
Request for color processing blocks only if they are
available in the display hw catalog and they are
sufficient in number for the selection.
Signed-off-by: Kalyan Thota <[email protected]>
Fixes: e47616df008b ("drm/msm/dpu: add support for color processing
Tested-by: John Stultz <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
Use the proper API instead.
Fixes: 70539bd795002 ("drm/amd: Update MEC HQD loading code for KFD")
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Jens Axboe <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Zhi Wang <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <[email protected]>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
|
|
When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:
./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o
[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()
This commit fixes the above issues by rework DSC as described:
1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
functions;
4. Add a mid-layer function that does not use any float point operation,
and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.
CC: Christian König <[email protected]>
CC: Alexander Deucher <[email protected]>
CC: Peter Zijlstra <[email protected]>
CC: Tony Cheng <[email protected]>
CC: Harry Wentland <[email protected]>
Signed-off-by: Rodrigo Siqueira <[email protected]>
Reviewed-by: Mikita Lipski <[email protected]>
Acked-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
In core, DRM connectors now notify userspace of hotplug events via
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611075007.GA15098@linux-uq9g
|
|
Currently the switch statement for format->cpp[0] value 4 assigns
color_index which is never read again and then falls through to the
default case and returns. This looks like a missing break statement
bug. Fix this by adding a break statement.
Addresses-Coverity: ("Unused value")
Fixes: 259d14a76a27 ("drm/ast: Split ast_set_vbios_mode_info()")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Tested-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[[email protected]: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Jens Axboe <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]> [usb]
Acked-by: Haren Myneni <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Zhi Wang <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "improve use_mm / unuse_mm", v2.
This series improves the use_mm / unuse_mm interface by better documenting
the assumptions, and my taking the set_fs manipulations spread over the
callers into the core API.
This patch (of 3):
Use the proper API instead.
Link: http://lkml.kernel.org/r/[email protected]
These helpers are only for use with kernel threads, and I will tie them
more into the kthread infrastructure going forward. Also move the
prototypes to kthread.h - mmu_context.h was a little weird to start with
as it otherwise contains very low-level MM bits.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Jens Axboe <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Zhi Wang <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull i915 uaccess updates from Al Viro:
"Low-hanging fruit in i915; there are several trickier followups, but
that'll wait for the next cycle"
* 'uaccess.i915' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
i915:get_engines(): get rid of pointless access_ok()
i915: alloc_oa_regs(): get rid of pointless access_ok()
i915 compat ioctl(): just use drm_ioctl_kernel()
i915: switch copy_perf_config_registers_or_number() to unsafe_put_user()
i915: switch query_{topology,engine}_info() to copy_to_user()
|
|
Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use kvfree() instead of kfree() to free coeff in build_regamma()
because the memory is allocated with kvzalloc().
Fixes: e752058b8671 ("drm/amd/display: Optimize gamma calculations")
Cc: [email protected]
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
m divider in DDC clock register is 4 bits wide. Fix that.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Jernej Skrabec <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Convert comments that reference mmap_sem to reference mmap_lock instead.
[[email protected]: fix up linux-next leftovers]
[[email protected]: s/lockaphore/lock/, per Vlastimil]
[[email protected]: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Rename the mmap_sem field to mmap_lock. Any new uses of this lock should
now go through the new mmap locking api. The mmap_lock is still
implemented as a rwsem, though this could change in the future.
[[email protected]: fix it for mm-gup-might_lock_readmmap_sem-in-get_user_pages_fast.patch]
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|