Age | Commit message (Collapse) | Author | Files | Lines |
|
Set boot_time_tmr flag for the ASIC which MP0 ip version
newer than 14.0.2
For runtime TMR:
Init tmr and load tmr should did.
For boottime TMR:
If do not support autoload, skip init TMR.
If support autoload, excute init TMR but skip load tmr.
v2: rebase (Alex)
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add flag boot_time_tmr to indicate boot time TMR or runtime TMR
instead of function.
v2: rework logic (Alex)
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Set psp->autoload_supported to true by default,
as only a few version of ASIC not support autoload,
and the furture version of PSP should support this.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.
This reverts commit 288c0254a0b0c9980dba9df7d5afadf27280b99c
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: George Shen <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Support PSP ip block for psp v14.
Add psp ip block for psp v14_0_2 and v14_0_3.
v2: sqaush in 14.0.3 firmware fix (Alex)
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Spirom update typically requires extremely long
duration for command execution, and special helper
function to wait for it's completion.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Allow reducing max UCLK in MANUAL performance level. New UCLK value
should be less than the max DPM level UCLK level value.
Ex:
echo manual > "/sys/bus/pci/devices/.../power_dpm_force_performance_level"
echo m 1 900 > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
echo c > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Tested-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The reservation is there to catch NULL pointer dereferences from the
GPU. Reduce the size to 64KB to make sure that shared virtual address
programming models can map all CPU-accessible virtual addresses for GPU
access. This is also the default for CPU virtual address mappings as
seen in /proc/sys/vm/mmap_min_addr.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add psp v14_0 ip block support.
v2: rebase (Alex)
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1: Add mp v14_0_2 register offset and shift masks
header files. (Hawking)
v2: Update mp v14_0_2 register offset and shift masks
header files to RE2. (Likun)
v3: Update mp v14_0_2 register offset and shift masks
header files to RE2.5. (Likun)
v4: Update mp v14_0_2 register offset and shift masks
header files to RE3. (Likun)
v5: Updates (Alex)
Signed-off-by: Hawking Zhang <[email protected]>
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
Reviewed-by: Felix Kuehling <[email protected]>
Suggested-by: Joseph Greathouse <[email protected]>
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
New worst-case measurement observed at 1897us.
[How]
Increase to 2000us to cover the new worst case + margin.
Reviewed-by: Ovidiu Bunea <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Without acquiring DMCUB hw lock, a race condition is caused with
Panel Replay feature, which will trigger a hang. Indicate that a
lock is necessary to prevent this when replay feature is enabled.
[How]
To allow dmub hw lock on Replay.
Reviewed-by: Robin Chen <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Martin Tsai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
allow psr-su/replay for z8
Reviewed-by: Muhammad Ahmed <[email protected]>
Reviewed-by: Sung joon Kim <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
dcn30_get_gamcor_current()
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Suggested-by: Roman Li <[email protected]>
Reviewed-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update the maximum resolution reported for HEVC encoding on VCN 4
devices to reflect its 8K encoding capability.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3159
Signed-off-by: Thong <[email protected]>
Reviewed-by: Ruijing Dong <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Read modify write hazards can occur when using a single shared scratch
register between driver and firmware leading to driver accessing DCN
in IPS2 and a system hang.
[How]
Add infrastructure for using REGION6 as a shared firmware state between
driver and firmware. This region is uncachable.
Replace the existing get/set idle calls with reads/writes to the
(volatile) shared firmware state blocks that a separated by at least
a cache line between firmware and driver.
Remove the workarounds that required rewriting/checking read modify
write hazards.
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Josip Pavic <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Sohaib Nadeem <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Roman Li <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
Need to fix some broken logic and sequencing in initial commit
[HOW]
Fix logic handling override deprogramming when exiting SQ128.
Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case.
Move LTTPR 128b/132b check out of requires_hwss and check during
runtime, as LTTPR caps are not populated on initial call.
Add pending_test_pattern to link state to allow HWSS to set FFE overrides
on retimer TX and/or skip setting APU TX FFE depending on requested pattern.
Use updated clock source for SQ128 override sequence.
Skip HW FFE preset programming when performing test pattern overrides.
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Michael Strauss <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
sw has most of the fgcg enabled which is the same as HW default.
but driver disabled some due to enable flag not initialized.
comparing HW state, we still need to enable dpp and dio.
Reviewed-by: Muhammad Ahmed <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Wenjing Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit f341055b10bd8be55c3c995dff5f770b236b8ca9.
System hang observed, this commit is thought to be the
regression point.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Ovidiu Bunea <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Gabe Teeger <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Tom Chung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Roman Li <[email protected]>
Reviewed-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]:
This reverts commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a.
The commit caused corruption when running some applications in fullscreen
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Sohaib Nadeem <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
We Double-check link status if training successful,
but miss the lane align status.
[HOW]
Add the lane align status check
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Zhikai Zhai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
struct xe_exec_queue bind.fence_* members are unused. Remove these.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DP/eDP and HDMI C20 PHY PLL values were updated for MTL platform
Signed-off-by: Ravi Kumar Vodapalli <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add a new query to the GuC submission interface version.
Mesa intends to use this information to check for old firmware versions
with a known bug where using the render and compute command streamers
simultaneously can cause GPU hangs due issues in firmware scheduling.
Based on patches from Vivaik and Joonas.
Compile tested only.
v2:
* Added branch version.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Cc: Kenneth Graunke <[email protected]>
Cc: Jose Souza <[email protected]>
Cc: Sagar Ghuge <[email protected]>
Cc: Paulo Zanoni <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Vivaik Balasubrawmanian <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Tested-by: José Roberto de Souza <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is
built-in, the clk_disable_unused congests with the runtime PM handling
of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to
fail without completing any jobs ([1]). Drop the BM_CMDLINE which
duplicate the command line from the .baremetal-igt-arm64 clause and
enforce the clk_ignore_unused kernelarg instead to make apq8016 runner
work.
[1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475
Fixes: 0119c894ab0d ("drm: Add initial ci/ subdirectory")
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Acked-by: Helen Koike <[email protected]>
Signed-off-by: Helen Koike <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Sanity check DRM_BUDDY_CONTIGUOUS_ALLOCATION.
v2: Fix checkpatch warnings.
Signed-off-by: Matthew Auld <[email protected]>
Reviewed-by: Arunpravin Paneer Selvam <[email protected]>
Signed-off-by: Arunpravin Paneer Selvam <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.
The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC.
Cc: <[email protected]> # 6.7+
Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3097
Tested-by: Mario Limonciello <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Acked-by: Christian König <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Arunpravin Paneer Selvam <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
Fix some typos and punctuation.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Due to a bug in GuC firmware, Mesa can't enable by default the usage of
compute engines in DG2 and newer.
A new GuC firmware fixed the issue but until now there was no way
for Mesa to know if KMD was running with the fixed GuC version or not,
so this uAPI is required.
It may be expanded in future to query other firmware versions too.
This is querying XE_UC_FW_VER_COMPATIBILITY/submission version because
that is also supported by VFs, while XE_UC_FW_VER_RELEASE don't.
i915 uAPI: https://patchwork.freedesktop.org/series/129627/
Mesa usage: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25233
v2:
- fixed drm_xe_query_uc_fw_version documentation
- moved branch_ver as the first version number
Cc: John Harrison <[email protected]>
Cc: Francois Dugast <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Unlock before returning on the error path.
Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Harshit Mogalapalli <[email protected]>
Reviewed-by: Sascha Hauer <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for panel rotation to ST7703 based devices.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Guido Günther <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280
display panel with a Sitronix ST7703 display controller. The panel
is installed rotated 270 degrees.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Guido Günther <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the host1x_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ricardo B. Marliere <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
VF drivers can't operate on MCR registers. Make sure that driver
is not trying to read nor write using any of MCR register.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
PAT programming can only be done by the PF driver.
Besides VF drivers don't have access to control registers.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Registers used by hwmon are not available for VF drivers.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Badal Nilawar <[email protected]>
Reviewed-by: Badal Nilawar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It is PF driver responsibility to verify that LMEM was correctly
initialized, also VF drivers don't have access to GU_CNTL register.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
VF drivers don't have access to the stolen memory.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
MOCS programming may only be done by the PF driver.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Don't capture engine ring registers as thoe are not available for
the VF driver.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
VFs can't use size mirrored from PCI config, but it should be
safe to assume it covers full 4GiB GGTT.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DRM_MODESET_LOCK_ALL_BEGIN() has a hidden trap-door (aka retry loop),
which means we can't rely too much on variable initializers.
Fixes: 6e455f5dcdd1 ("drm/crtc: fix uninitialized variable use")
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Tested-by: Dmitry Baryshkov <[email protected]> # sc7180, sdm845
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Without unsigned long typecast, the size is passed in as zero if page
array size >= 4GB, nr_pages >= 0x100000, then sg list converted will
have the first and the last chunk lost.
Signed-off-by: Philip Yang <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Reviewed-by: Christian König <[email protected]>
CC: [email protected]
Signed-off-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|