aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2025-01-17drm/mediatek: Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supportedDaniel Golle1-28/+29
[ Upstream commit f8d9b91739e1fb436447c437a346a36deb676a36 ] Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N and probably other older SoCs being broken. Move setting up AFBC layer configuration into a separate function only being called on hardware which actually supports AFBC which restores the behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") on non-AFBC hardware. Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") Cc: [email protected] Signed-off-by: Daniel Golle <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/amd/display: increase MAX_SURFACES to the value supported by hwMelissa Wen1-1/+1
commit 21541bc6b44241e3f791f9e552352d8440b2b29e upstream. As the hw supports up to 4 surfaces, increase the maximum number of surfaces to prevent the DC error when trying to use more than three planes. [drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit b8d6daffc871a42026c3c20bff7b8fa0302298c1) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amd/display: fix page fault due to max surface definition mismatchMelissa Wen6-9/+8
commit 7de8d5c90be9ad9f6575e818a674801db2ada794 upstream. DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <[email protected]> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amd/display: fix divide error in DM plane scale calcsMelissa Wen1-2/+2
commit 5225fd2a26211d012533acf98a6ad3f983885817 upstream. dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amdkfd: wq_release signals dma_fence only when availableZhu Lingshan1-1/+2
commit a993d319aebb7cce8a10c6e685344b7c2ad5c4c2 upstream. kfd_process_wq_release() signals eviction fence by dma_fence_signal() which wanrs if dma_fence is NULL. kfd_process->ef is initialized by kfd_process_device_init_vm() through ioctl. That means the fence is NULL for a new created kfd_process, and close a kfd_process right after open it will trigger the warning. This commit conditionally signals the eviction fence in kfd_process_wq_release() only when it is available. [ 503.660882] WARNING: CPU: 0 PID: 9 at drivers/dma-buf/dma-fence.c:467 dma_fence_signal+0x74/0xa0 [ 503.782940] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [ 503.789640] RIP: 0010:dma_fence_signal+0x74/0xa0 [ 503.877620] Call Trace: [ 503.880066] <TASK> [ 503.882168] ? __warn+0xcd/0x260 [ 503.885407] ? dma_fence_signal+0x74/0xa0 [ 503.889416] ? report_bug+0x288/0x2d0 [ 503.893089] ? handle_bug+0x53/0xa0 [ 503.896587] ? exc_invalid_op+0x14/0x50 [ 503.900424] ? asm_exc_invalid_op+0x16/0x20 [ 503.904616] ? dma_fence_signal+0x74/0xa0 [ 503.908626] kfd_process_wq_release+0x6b/0x370 [amdgpu] [ 503.914081] process_one_work+0x654/0x10a0 [ 503.918186] worker_thread+0x6c3/0xe70 [ 503.921943] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.926735] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.931527] ? __kthread_parkme+0x82/0x140 [ 503.935631] ? __pfx_worker_thread+0x10/0x10 [ 503.939904] kthread+0x2a8/0x380 [ 503.943132] ? __pfx_kthread+0x10/0x10 [ 503.946882] ret_from_fork+0x2d/0x70 [ 503.950458] ? __pfx_kthread+0x10/0x10 [ 503.954210] ret_from_fork_asm+0x1a/0x30 [ 503.958142] </TASK> [ 503.960328] ---[ end trace 0000000000000000 ]--- Fixes: 967d226eaae8 ("dma-buf: add WARN_ON() illegal dma-fence signaling") Signed-off-by: Zhu Lingshan <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 2774ef7625adb5fb9e9265c26a59dca7b8fd171e) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amdkfd: fixed page fault when enable MES shader debugger[email protected]1-0/+17
commit 9738609449c3e44d1afb73eecab4763362b57930 upstream. Initialize the process context address before setting the shader debugger. [ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40 [ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0 [ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41 [ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849 Signed-off-by: Jesse Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 5b231f5bc9ff02ec5737f2ec95cdf15ac95088e9) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amd/pm: fix BUG: scheduling while atomicKun Liu4-6/+10
commit 2a238b09bfd04e8155a7a323364bce1c38b28c0f upstream. atomic scheduling will be triggered in interrupt handler for AC/DC mode switch as following backtrace. Call Trace: <IRQ> dump_stack_lvl __schedule_bug __schedule schedule schedule_preempt_disabled __mutex_lock smu_cmn_send_smc_msg_with_param smu_v13_0_irq_process amdgpu_irq_dispatch amdgpu_ih_process amdgpu_irq_handler __handle_irq_event_percpu handle_irq_event handle_edge_irq __common_interrupt common_interrupt </IRQ> <TASK> asm_common_interrupt Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Kun Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 03cc84b102d1a832e8dfc59344346dedcebcdf42) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amdgpu: Add a lock when accessing the buddy trim functionArunpravin Paneer Selvam1-1/+1
commit 75c8b703e5bded1e33b08fb09b829e7c2c1ed50a upstream. When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Fixes: 4a5ad08f5377 ("drm/amdgpu: Add address alignment support to DCC buffers") Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amd/display: Add check for granularity in dml ceil/floor helpersRoman Li1-0/+8
commit 0881fbc4fd62e00a2b8e102725f76d10351b2ea8 upstream. [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. Cc: Mario Limonciello <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/amd/display: Remove unnecessary amdgpu_irq_get/putAlex Hung1-31/+0
commit 5009628d8509dbb90e1b88e01eda00430fa24b4b upstream. [WHY & HOW] commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank, and amdgpu_irq_get/put do not need to be called here. Part of that patch got lost somehow, so fix it up. Fixes: 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Leo Li <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 3782305ce5807c18fbf092124b9e8303cf1723ae) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"Chun-Kuang Hu1-16/+15
commit d08555758fb1dbfb48f0cb58176fdc98009e6070 upstream. This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4. With that patch the panel in the Tentacruel ASUS Chromebook CM14 (CM1402F) flickers. There are 1 or 2 times per second a black panel. Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse that patch. Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing") Cc: [email protected] Cc: Shuijing Li <[email protected]> Reported-by: Jens Ziller <[email protected]> Closes: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-17drm/xe: Fix tlb invalidation when wedgingLucas De Marchi3-7/+8
[ Upstream commit 9ab4981552930a9c45682d62424ba610edc3992d ] If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b726b93 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Add return value check when reading DPCDLiankun Yang1-3/+2
[ Upstream commit 522908140645865dc3e2fac70fd3b28834dfa7be ] Check the return value of drm_dp_dpcd_readb() to confirm that AUX communication is successful. To simplify the code, replace drm_dp_dpcd_readb() and DP_GET_SINK_COUNT() with drm_dp_read_sink_count(). Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Liankun Yang <[email protected]> Reviewed-by: Guillaume Ranquet <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188AngeloGioacchino Del Regno1-5/+17
[ Upstream commit 76aed5e00ff2625e0ec4b40c75f3514bdb27fae4 ] Registers DSI_VM_CMD and DSI_SHADOW_DEBUG start at different addresses in both MT8186 and MT8188 compared to the older IPs. Add two members in struct mtk_dsi_driver_data to specify the offsets for these two registers on a per-SoC basis, then do specify those in all of the currently present SoC driver data. This fixes writes to the Video Mode Command Packet Control register, fixing enablement of command packet transmission (VM_CMD_EN) and allowance of this transmission during the VFP period (TS_VFP_EN) on both MT8186 and MT8188. Fixes: 03d7adc41027 ("drm/mediatek: Add mt8186 dsi compatible to mtk_dsi.c") Fixes: 814d5341f314 ("drm/mediatek: Add mt8188 dsi compatible to mtk_dsi.c") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Fix mode valid issue for dpLiankun Yang1-11/+17
[ Upstream commit 0d68b55887cedc7487036ed34cb4c2097c4228f1 ] Fix dp mode valid issue to avoid abnormal display of limit state. After DP passes link training, it can express the lane count of the current link status is good. Calculate the maximum bandwidth supported by DP using the current lane count. The color format will select the best one based on the bandwidth requirements of the current timing mode. If the current timing mode uses RGB and meets the DP link bandwidth requirements, RGB will be used. If the timing mode uses RGB but does not meet the DP link bandwidthi requirements, it will continue to check whether YUV422 meets the DP link bandwidth. FEC overhead is approximately 2.4% from DP 1.4a spec 2.2.1.4.2. The down-spread amplitude shall either be disabled (0.0%) or up to 0.5% from 1.4a 3.5.2.6. Add up to approximately 3% total overhead. Because rate is already divided by 10, mode->clock does not need to be multiplied by 10. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Liankun Yang <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Fix YCbCr422 color format issue for DPLiankun Yang1-5/+8
[ Upstream commit ef24fbd8f12015ff827973fffefed3902ffd61cc ] Setting up misc0 for Pixel Encoding Format. According to the definition of YCbCr in spec 1.2a Table 2-96, 0x1 << 1 should be written to the register. Use switch case to distinguish RGB, YCbCr422, and unsupported color formats. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Liankun Yang <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: stop selecting foreign driversArnd Bergmann1-5/+0
[ Upstream commit 924d66011f2401a4145e2e814842c5c4572e439f ] The PHY portion of the mediatek hdmi driver was originally part of the driver it self and later split out into drivers/phy, which a 'select' to keep the prior behavior. However, this leads to build failures when the PHY driver cannot be built: WARNING: unmet direct dependencies detected for PHY_MTK_HDMI Depends on [n]: (ARCH_MEDIATEK || COMPILE_TEST [=y]) && COMMON_CLK [=y] && OF [=y] && REGULATOR [=n] Selected by [m]: - DRM_MEDIATEK_HDMI [=m] && HAS_IOMEM [=y] && DRM [=m] && DRM_MEDIATEK [=m] ERROR: modpost: "devm_regulator_register" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined! ERROR: modpost: "rdev_get_drvdata" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined! The best option here is to just not select the phy driver and leave that up to the defconfig. Do the same for the other PHY and memory drivers selected here as well for consistency. Fixes: a481bf2f0ca4 ("drm/mediatek: Separate mtk_hdmi_phy to an independent module") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Add support for 180-degree rotation in the display driverJason-JH.Lin1-2/+10
[ Upstream commit 5c9d7e79ba154e8e1f0bfdeb7b495f454c1a3eba ] mediatek-drm driver reported the capability of 180-degree rotation by adding `DRM_MODE_ROTATE_180` to the plane property, as flip-x combined with flip-y equals a 180-degree rotation. However, we did not handle the rotation property in the driver and lead to rotation issues. Fixes: 74608d8feefd ("drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property") Signed-off-by: Jason-JH.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()Jason-JH.Lin1-6/+19
[ Upstream commit da03801ad08f2488c01e684509cd89e1aa5d17ec ] mtk_crtc_finish_page_flip() is used to notify userspace that a page flip has been completed, allowing userspace to free the frame buffer of the last frame and commit the next frame. In MediaTek's hardware design for configuring display hardware by using GCE, `DRM_EVENT_FLIP_COMPLETE` should be notified to userspace after GCE has finished configuring all display hardware settings for each atomic_commit(). Currently, mtk_crtc_finish_page_flip() cannot guarantee that GCE has configured all the display hardware settings of the last frame. Therefore, to increase the accuracy of the timing for notifying `DRM_EVENT_FLIP_COMPLETE` to userspace, mtk_crtc_finish_page_flip() should be moved to ddp_cmdq_cb(). Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done") Signed-off-by: Jason-JH.Lin <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-17drm/mediatek: Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind ↵Guoqing Jiang1-0/+2
returns err [ Upstream commit 36684e9d88a2e2401ae26715a2e217cb4295cea7 ] The pointer need to be set to NULL, otherwise KASAN complains about use-after-free. Because in mtk_drm_bind, all private's drm are set as follows. private->all_drm_private[i]->drm = drm; And drm will be released by drm_dev_put in case mtk_drm_kms_init returns failure. However, the shutdown path still accesses the previous allocated memory in drm_atomic_helper_shutdown. [ 84.874820] watchdog: watchdog0: watchdog did not stop! [ 86.512054] ================================================================== [ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378 [ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1 [ 86.515213] [ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55 [ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022 [ 86.517960] Call trace: [ 86.518333] show_stack+0x20/0x38 (C) [ 86.518891] dump_stack_lvl+0x90/0xd0 [ 86.519443] print_report+0xf8/0x5b0 [ 86.519985] kasan_report+0xb4/0x100 [ 86.520526] __asan_report_load8_noabort+0x20/0x30 [ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378 [ 86.521966] mtk_drm_shutdown+0x54/0x80 [ 86.522546] platform_shutdown+0x64/0x90 [ 86.523137] device_shutdown+0x260/0x5b8 [ 86.523728] kernel_restart+0x78/0xf0 [ 86.524282] __do_sys_reboot+0x258/0x2f0 [ 86.524871] __arm64_sys_reboot+0x90/0xd8 [ 86.525473] invoke_syscall+0x74/0x268 [ 86.526041] el0_svc_common.constprop.0+0xb0/0x240 [ 86.526751] do_el0_svc+0x4c/0x70 [ 86.527251] el0_svc+0x4c/0xc0 [ 86.527719] el0t_64_sync_handler+0x144/0x168 [ 86.528367] el0t_64_sync+0x198/0x1a0 [ 86.528920] [ 86.529157] The buggy address belongs to the physical page: [ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc [ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff) [ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000 [ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000 [ 86.534511] page dumped because: kasan: bad access detected [ 86.535323] [ 86.535559] Memory state around the buggy address: [ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.544733] ^ [ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.563928] ================================================================== [ 86.571093] Disabling lock debugging due to kernel taint [ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b [ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f] ... Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support") Signed-off-by: Guoqing Jiang <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm: adv7511: Fix use-after-free in adv7533_attach_dsi()Biju Das2-4/+8
commit 81adbd3ff21c1182e06aa02c6be0bfd9ea02d8e8 upstream. The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: [email protected] Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Biju Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-09drm: adv7511: Drop dsi single lane supportBiju Das1-1/+1
commit 79d67c499c3f886202a40c5cb27e747e4fa4d738 upstream. As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Reported-by: Hien Huynh <[email protected]> Cc: [email protected] Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Adam Ford <[email protected]> Signed-off-by: Biju Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-09drm/xe: Wait for migration job before unmapping pagesNirmoy Das1-1/+9
commit 5e0a67fdb894d34c5f109e969320eef9ddae7480 upstream. Fix a potential GPU page fault during tt -> system moves by waiting for migration jobs to complete before unmapping SG. This ensures that IOMMU mappings are not prematurely torn down while a migration job is still in progress. v2: Use intr=false(Matt A) v3: Update commit message(Matt A) v4: s/DMA_RESV_USAGE_BOOKKEEP/DMA_RESV_USAGE_KERNEL(Thomas) Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3466 Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT") Cc: Thomas Hellström <[email protected]> Cc: Matthew Brost <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: [email protected] # v6.11+ Cc: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Thomas Hellström <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Nirmoy Das <[email protected]> (cherry picked from commit cda06412c06893a6f07a2fbf89d42a0972ec9e8e) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-09drm/xe: Use non-interruptible wait when moving BO to systemNirmoy Das1-1/+1
commit 528cef1b4170f328d28d4e9b437380d8e5a2d18f upstream. Ensure a non-interruptible wait is used when moving a bo to XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely while a GPU job is still in progress, even if the CPU receives a signal during the operation. Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT") Cc: Thomas Hellström <[email protected]> Cc: Matthew Brost <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: [email protected] # v6.11+ Suggested-by: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Thomas Hellström <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Nirmoy Das <[email protected]> (cherry picked from commit dc5e20ae1f8a7c354dc9833faa2720254e5a5443) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-09drm/amdkfd: Correct the migration DMA map directionPrike Liang1-2/+2
[ Upstream commit 5c3de6b02d38eb9386edf50490e050bb44398e40 ] The SVM DMA device map direction should be set the same as the DMA unmap setting, otherwise the DMA core will report the following warning. Before finialize this solution, there're some discussion on the DMA mapping type(stream-based or coherent) in this KFD migration case, followed by https://lore.kernel.org/all/04d4ab32 [email protected]/T/. As there's no dma_sync_single_for_*() in the DMA buffer accessed that because this migration operation should be sync properly and automatically. Give that there's might not be a performance problem in various cache sync policy of DMA sync. Therefore, in order to simplify the DMA direction setting alignment, let's set the DMA map direction as BIDIRECTIONAL. [ 150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930 [ 150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds [ 150.834310] wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii [ 150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G OE 6.10.0-custom #492 [ 150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021 [ 150.834360] RIP: 0010:check_unmap+0x1cc/0x930 [ 150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50 [ 150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086 [ 150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027 [ 150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680 [ 150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850 [ 150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40 [ 150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b [ 150.834377] FS: 00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000 [ 150.834379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0 [ 150.834383] Call Trace: [ 150.834385] <TASK> [ 150.834387] ? show_regs+0x6d/0x80 [ 150.834393] ? __warn+0x8c/0x140 [ 150.834397] ? check_unmap+0x1cc/0x930 [ 150.834400] ? report_bug+0x193/0x1a0 [ 150.834406] ? handle_bug+0x46/0x80 [ 150.834410] ? exc_invalid_op+0x1d/0x80 [ 150.834413] ? asm_exc_invalid_op+0x1f/0x30 [ 150.834420] ? check_unmap+0x1cc/0x930 [ 150.834425] debug_dma_unmap_page+0x86/0x90 [ 150.834431] ? srso_return_thunk+0x5/0x5f [ 150.834435] ? rmap_walk+0x28/0x50 [ 150.834438] ? srso_return_thunk+0x5/0x5f [ 150.834441] ? remove_migration_ptes+0x79/0x80 [ 150.834445] ? srso_return_thunk+0x5/0x5f [ 150.834448] dma_unmap_page_attrs+0xfa/0x1d0 [ 150.834453] svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu] [ 150.834710] svm_migrate_ram_to_vram+0x361/0x740 [amdgpu] [ 150.834914] svm_migrate_to_vram+0xa8/0xe0 [amdgpu] [ 150.835111] svm_range_set_attr+0xff2/0x1450 [amdgpu] [ 150.835311] svm_ioctl+0x4a/0x50 [amdgpu] [ 150.835510] kfd_ioctl_svm+0x54/0x90 [amdgpu] [ 150.835701] kfd_ioctl+0x3c2/0x530 [amdgpu] [ 150.835888] ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu] [ 150.836075] ? srso_return_thunk+0x5/0x5f [ 150.836080] ? tomoyo_file_ioctl+0x20/0x30 [ 150.836086] __x64_sys_ioctl+0x9c/0xd0 [ 150.836091] x64_sys_call+0x1219/0x20d0 [ 150.836095] do_syscall_64+0x51/0x120 [ 150.836098] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 150.836102] RIP: 0033:0x7faf0f11a94f [ 150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f [ 150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003 [ 150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001 [ 150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0 [ 150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000 [ 150.836122] </TASK> [ 150.836124] ---[ end trace 0000000000000000 ]--- Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/amdgpu: use sjt mec fw on gfx943 for sriovVictor Zhao1-2/+8
[ Upstream commit 9a4ab400f1fad0e6e8686b8f5fc5376383860ce8 ] Use second jump table in sriov for live migration or mulitple VF support so different VF can load different version of MEC as long as they support sjt Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/i915/dg1: Fix power gate sequence.Rodrigo Vivi1-1/+1
[ Upstream commit 20e7c5313ffbf11c34a46395345677adbe890bee ] sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks. VLK: 16314, 4304 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381 Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.") Cc: Vinay Belgaumkar <[email protected]> Cc: Himal Prasad Ghimiray <[email protected]> Reviewed-by: Vinay Belgaumkar <[email protected]> Reviewed-by: Himal Prasad Ghimiray <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/i915/cx0_phy: Fix C10 pll programming sequenceSuraj Kandpal1-8/+4
[ Upstream commit 385a95cc72941c7f88630a7bc4176048cc03b395 ] According to spec VDR_CUSTOM_WIDTH register gets programmed after pll specific VDR registers and TX Lane programming registers are done. Moreover we only program into C10_VDR_CONTROL1 to update config and setup master lane once all VDR registers are written into. Bspec: 67636 Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming") Signed-off-by: Suraj Kandpal <[email protected]> Reviewed-by: Ankit Nautiyal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f9d418552ba1e3a0e92487ff82eb515dab7516c0) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/xe: Fix fault on fd close after unbindLucas De Marchi1-0/+9
[ Upstream commit fe39b222a4139354d32ff9d46b88757f63f71d63 ] If userspace holds an fd open, unbinds the device and then closes it, the driver shouldn't try to access the hardware. Protect it by using drm_dev_enter()/drm_dev_exit(). This fixes the following page fault: <6> [IGT] xe_wedged: exiting, ret=98 <1> BUG: unable to handle page fault for address: ffffc901bc5e508c <1> #PF: supervisor read access in kernel mode <1> #PF: error_code(0x0000) - not-present page ... <4> xe_lrc_update_timestamp+0x1c/0xd0 [xe] <4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe] <4> xe_exec_queue_fini+0x16/0xb0 [xe] <4> __guc_exec_queue_fini_async+0xc4/0x190 [xe] <4> guc_exec_queue_fini_async+0xa0/0xe0 [xe] <4> guc_exec_queue_fini+0x23/0x40 [xe] <4> xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> xe_file_close+0xd4/0x1a0 [xe] <4> drm_file_free+0x210/0x280 [drm] <4> drm_close_helper.isra.0+0x6d/0x80 [drm] <4> drm_release_noglobal+0x20/0x90 [drm] Fixes: 514447a12190 ("drm/xe: Stop accumulating LRC timestamp on job_free") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421 Reviewed-by: Umesh Nerlige Ramappa <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/xe/pf: Use correct function to check LMEM provisioningMichal Wajdeczko1-1/+1
[ Upstream commit af12ba67d09ebe2b31ab997cea1a930864028562 ] There is a typo in function call and instead of VF LMEM we were looking at VF GGTT provisioning. Fix that. Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned") Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Piotr Piórkowski <[email protected]> Reviewed-by: Himal Prasad Ghimiray <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a8d0aa0e7fcd20c9f1992688c0f0d07a68287403) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/xe: Revert some changes that break a mesa debug toolJohn Harrison1-1/+14
[ Upstream commit a53da2fb25a31f4fb8eaeb93c7b1134fc14fd209 ] There is a mesa debug tool for decoding devcoredump files. Recent changes to improve the devcoredump output broke that tool. So revert the changes until the tool can be extended to support the new fields. Signed-off-by: John Harrison <[email protected]> Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info") Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function") Cc: John Harrison <[email protected]> Cc: Julia Filipchuk <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: Thomas Hellström <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Reviewed-by: Jonathan Cavitt <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit 70fb86a85dc9fd66014d7eb2fe356f50702ceeb6) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/bridge: adv7511_audio: Update Audio InfoFrame properlyStefan Ekenberg1-2/+12
[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ] AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed: - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME. - In audio_startup() use the correct register for clearing AUDIO_UPDATE bit. The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535. Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning. Tested-by: Biju Das <[email protected]> Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support") Signed-off-by: Stefan Ekenberg <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-09drm/amdgpu: fix backport of commit 73dae652dcacAlex Deucher1-1/+5
Commit 73dae652dcac ("drm/amdgpu: rework resume handling for display (v2)") missed a small code change when it was backported resulting in an automatic backlight control breakage. Fix the backport. Note that this patch is not in Linus' tree as it is not required there; the bug was introduced in the backport. Fixes: 99a02eab8251 ("drm/amdgpu: rework resume handling for display (v2)") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3853 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.11.x Signed-off-by: Greg Kroah-Hartman <[email protected]>
2025-01-02drm/xe: Move the coredump registration to the worker threadJohn Harrison1-34/+39
[ Upstream commit 5dce85fecb87751ec94526e1ac516dd7871e2e0c ] Adding lockdep checking to the coredump code showed that there was an existing violation. The dev_coredumpm_timeout() call is used to register the dump with the base coredump subsystem. However, that makes multiple memory allocations, only some of which use the GFP_ flags passed in. So that also needs to be deferred to the worker function where it is safe to allocate with arbitrary flags. In order to not add protoypes for the callback functions, moving the _timeout call also means moving the worker thread function to later in the file. v2: Rebased after other changes to the worker function. Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.") Cc: Thomas Hellström <[email protected]> Cc: Matthew Brost <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Francois Dugast <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: "Thomas Hellström" <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: "Christian König" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v6.8+ Signed-off-by: John Harrison <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 90f51a7f4ec1004fc4ddfbc6d1f1068d85ef4771) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2025-01-02drm/xe: Take PM ref in delayed snapshot capture workerMatthew Brost1-0/+6
[ Upstream commit aef0b4a07277f715bfc2a0d76a16da2bc4e89205 ] The delayed snapshot capture worker can access the GPU or VRAM both of which require a PM reference. Take a reference in this worker. Cc: Rodrigo Vivi <[email protected]> Cc: Maarten Lankhorst <[email protected]> Fixes: 4f04d07c0a94 ("drm/xe: Faster devcoredump") Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 1c6878af115a4586a40d6c14d530fa9f93e0bd83) Signed-off-by: Thomas Hellström <[email protected]> Stable-dep-of: 5dce85fecb87 ("drm/xe: Move the coredump registration to the worker thread") Signed-off-by: Sasha Levin <[email protected]>
2025-01-02drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()Imre Deak1-6/+18
[ Upstream commit e54b00086f7473dbda1a7d6fc47720ced157c6a8 ] While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL. This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req(). Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used. v2: Fix kfreeing the request if getting an mst_primary reference fails. Cc: Lyude Paul <[email protected]> Reviewed-by: Lyude Paul <[email protected]> (v1) Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
2024-12-27drm/amdgpu/mmhub4.1: fix IP version checkAlex Deucher1-1/+1
commit 6ebc5b92190e01dd48313b68cbf752c9adcfefa8 upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 63bfd24088b42c6f55c2096bfc41b50213d419b2) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu/gfx12: fix IP version checkAlex Deucher1-1/+1
commit 41be00f839e9ee7753892a73a36ce4c14c6f5cbf upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit f1fd1d0f40272948aa6ab82a3a82ecbbc76dff53) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu/nbio7.0: fix IP version checkAlex Deucher1-1/+1
commit 3abb660f9e18925468685591a3702bda05faba4f upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 0ec43fbece784215d3c4469973e4556d70bce915) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu/smu14.0.2: fix IP version checkAlex Deucher1-1/+1
commit 9e752ee26c1031312a01d2afc281f5f6fdfca176 upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 8f2cd1067afe68372a1723e05e19b68ed187676a) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu/nbio7.7: fix IP version checkAlex Deucher1-1/+1
commit 458600da793da12e0f3724ecbea34a80703f4d5b upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 22b9555bc90df22b585bdd1f161b61584b13af51) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu/nbio7.11: fix IP version checkAlex Deucher1-1/+1
commit 8c1ecc7197a88c6ae62de56e1c0887f220712a32 upstream. Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 2c8eeaaa0fe5841ccf07a0eb51b1426f34ef39f7) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-12-27drm/amdgpu: don't access invalid schedPierre-Eric Pelloux-Prayer1-2/+1
[ Upstream commit a93b1020eb9386d7da11608477121b10079c076a ] Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) will be called, which would crash the machine because the ring value is bogus. To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this because the device is actually not used in this function. The next commit will remove the ring argument completely. Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7) Signed-off-by: Sasha Levin <[email protected]>
2024-12-27i915/guc: Accumulate active runtime on gt resetUmesh Nerlige Ramappa1-1/+14
[ Upstream commit 1622ed27d26ab4c234476be746aa55bcd39159dd ] On gt reset, if a context is running, then accumulate it's active time into the busyness counter since there will be no chance for the context to switch out and update it's run time. v2: Move comment right above the if (John) Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2024-12-27i915/guc: Ensure busyness counter increases motonicallyUmesh Nerlige Ramappa2-1/+9
[ Upstream commit 59a0b46788d58fdcee8d2f6b4e619d264a1799bf ] Active busyness of an engine is calculated using gt timestamp and the context switch in time. While capturing the gt timestamp, it's possible that the context switches out. This race could result in an active busyness value that is greater than the actual context runtime value by a small amount. This leads to a negative delta and throws off busyness calculations for the user. If a subsequent count is smaller than the previous one, just return the previous one, since we expect the busyness to catch up. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2024-12-27i915/guc: Reset engine utilization buffer before registrationUmesh Nerlige Ramappa1-0/+21
[ Upstream commit abcc2ddae5f82aa6cfca162e3db643dd33f0a2e8 ] On GT reset, we store total busyness counts for all engines and re-register the utilization buffer with GuC. At that time we should reset the buffer, so that we don't get spurious busyness counts on subsequent queries. To repro this issue, run igt@perf_pmu@busy-hang followed by igt@perf_pmu@most-busy-idle-check-all for a couple iterations. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2024-12-27drm/panel: synaptics-r63353: Fix regulator unbalanceMichael Trimarchi1-1/+1
[ Upstream commit d2bd3fcb825725a59c8880070b1206b1710922bd ] The shutdown function can be called when the display is already unprepared. For example during reboot this trigger a kernel backlog. Calling the drm_panel_unprepare, allow us to avoid to trigger the kernel warning. Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver") Tested-by: Dario Binacchi <[email protected]> Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Jessica Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
2024-12-27drm/panel: st7701: Add prepare_prev_first flag to drm_panelMarek Vasut1-0/+1
[ Upstream commit 406dd4c7984a457567ca652455d5efad81983f02 ] The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM DSI host. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Jessica Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
2024-12-27drm/panel: novatek-nt35950: fix return value check in nt35950_probe()Yang Yingliang1-2/+2
[ Upstream commit f8fd0968eff52cf092c0d517d17507ea2f6e5ea5 ] mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
2024-12-27drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereferenceZhang Zekun1-0/+2
[ Upstream commit e1e1af9148dc4c866eda3fb59cd6ec3c7ea34b1d ] drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Zhang Zekun <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.