aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2016-12-22drm/i915: Use primary plane->state for overlay ckey setupVille Syrjälä1-16/+17
Extract the primary plane pixel format via plane state when setting up the overlay colorkey. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-22drm/i915: Reorganize overlay filter coeffs into a nicer formVille Syrjälä1-28/+36
Use two-dimensional arrays and named initializers to make the overlay filter coefficient tables easier to parse for humans. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-22drm/i915: Simplify SWIDTHSW calculationVille Syrjälä1-13/+11
The formula in Bspec for computing the overlay SWIDTHSW is overly obfuscated. Simplify the formula to something that's easily parsed by humans. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-22drm/i915: Kill intel_panel_fitter_pipe()Ville Syrjälä1-28/+1
Check pipe config gmch_pfit.control instead of using intel_panel_fitter_pipe() to figure out if the pipe for the overlay is using the panel fitter. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-22drm/i915: Use pipe_src_w in overlay codeVille Syrjälä1-7/+7
Replace the use of crtc->mode.h/vdisplay with the more appropriate config->pipe_src_w/h. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-22drm/i915: Fix the overlay frontbuffer trackingVille Syrjälä1-23/+41
Do the overlay frontbuffer tracking properly so that it matches the state of the overlay on/off/continue requests. One slight problem is that intel_frontbuffer_flip_complete() may get delayed by an arbitrarily liong time due to the fact that the overlay code likes to bail out when a signal occurs. So the flip may not get completed until the ioctl is restarted. But fixing that would require bigger surgery, so I decided to ignore it for now. Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-23Merge tag 'drm-intel-next-fixes-2016-12-22' of ↵Dave Airlie12-95/+186
git://anongit.freedesktop.org/git/drm-intel into drm-fixes First set of i915 fixes for code in next. * tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: skip the first 4k of stolen memory on everything >= gen8 drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping drm/i915: Fix use after free in logical_render_ring_init drm/i915: disable PSR by default on HSW/BDW drm/i915: Fix setting of boost freq tunable drm/i915: tune down the fast link training vs boot fail drm/i915: Reorder phys backing storage release drm/i915/gen9: Fix PCODE polling during SAGV disabling drm/i915/gen9: Fix PCODE polling during CDCLK change notification drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating drm/i915: drop the struct_mutex when wedged or trying to reset
2016-12-22drm/i915: Fix oops in overlay due to frontbuffer trackingVille Syrjälä1-2/+2
The vma will be NULL if the overlay was previously off, so dereferencing it will oops. Check for NULL before doing that. Cc: [email protected] Cc: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Fixes: 9b3b7841b86d ("drm/i915/overlay: Use VMA as the primary tracker for images") Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2016-12-23Merge tag 'drm-misc-fixes-2016-12-22' of ↵Dave Airlie1-2/+5
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Here's the one lonely bugfix I talked about on irc. * tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc: drivers/gpu/drm/ast: Fix infinite loop if read fails
2016-12-22drm/i915: Fix oopses in the overlay code due to i915_gem_active stuffVille Syrjälä2-1/+21
The i915_gem_active stuff doesn't like a NULL ->retire hook, but the overlay code can set it to NULL. That obviously ends up oopsing. Fix it by introducing a new helper to assign the retirement callback that will switch out the NULL function pointer with i915_gem_retire_noop. Cc: [email protected] Cc: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Fixes: 0d9bdd886f29 ("drm/i915: Convert intel_overlay to request tracking") Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-23Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-631/+1218
into drm-fixes - fix display regression on DCE6/8 - Powergating fixes for GFX8 - amdgpu SI fixes (golden settings, proper rev id setup, etc.) * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: update tile table for oland/hainan drm/amdgpu: update tile table for verde drm/amdgpu: update rev id for verde drm/amdgpu: update golden setting for verde drm/amdgpu: update rev id for oland drm/amdgpu: update golden setting for oland drm/amdgpu: update rev id for hainan drm/amdgpu: update golden setting for hainan drm/amdgpu: update rev id for pitcairn drm/amdgpu: update golden setting for pitcairn drm/amdgpu: update golden setting/tiling table of tahiti drm/amdgpu: fix cursor setting of dce6/dce8 drm/amdgpu: refine set clock gating for tonga/polaris drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11. drm/amdgpu: add new gfx cg flags. drm/amdgpu: fix pg can't be disabled by PG mask. drm/amdgpu: always initialize gfx pg for gfx_v8.0. drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney. drm/amdgpu: fix init save/restore list in gfx_v8.0 drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0. ...
2016-12-22drm/i915: Initialize overlay->last_flip properlyVille Syrjälä1-0/+2
Initialize overlay->last_flip properly instead of leaving it zeroed. Cc: [email protected] Cc: Chris Wilson <[email protected]> Fixes: 0d9bdd886f29 ("drm/i915: Convert intel_overlay to request tracking") Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-22Merge tag 'acpi-extra-4.10-rc1' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Here are new versions of two ACPICA changes that were deferred previously due to a problem they had introduced, two cleanups on top of them and the removal of a useless warning message from the ACPI core. Specifics: - Move some Linux-specific functionality to upstream ACPICA and update the in-kernel users of it accordingly (Lv Zheng) - Drop a useless warning (triggered by the lack of an optional object) from the ACPI namespace scanning code (Zhang Rui)" * tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel ACPI: do not warn if _BQC does not exist
2016-12-22drm/i915: Move the min_pixclk[] handling to the end of readoutVille Syrjälä1-16/+16
Trying to determine the pixel rate of the pipe can't be done until we know the clock, which means it can't be done until the encoder .get_config() hooks have been called. So let's move the min_pixclk[] stuff to the end of intel_modeset_readout_hw_state() when we actually have gathered all the required infromation. Cc: Maarten Lankhorst <[email protected]> Cc: Mika Kahola <[email protected]> Cc: Ander Conselvan de Oliveira <[email protected]> Fixes: 565602d7501a ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.") Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ander Conselvan de Oliveira <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]>
2016-12-22Merge branches 'acpica' and 'acpi-scan'Rafael J. Wysocki2-2/+4
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
2016-12-22drm/i915: Force VDD off on the new power seqeuencer before starting to use itVille Syrjälä1-7/+34
Apparently some VLV BIOSen like to leave the VDD force bit enabled even for power seqeuncers that aren't properly hooked up to any port. That will result in a imbalance in the AUX power domain refcount when we stat to use said power sequencer as edp_panel_vdd_on() will not grab the power domain reference if it sees that the VDD is already on. To fix this let's make sure we turn off the VDD force bit when we initialize the power sequencer registers. That is, unless it's being done from the init path since there we are actually initializing the registers for the current power sequencer and we don't want to turn VDD off needlessly as that would require waiting for the power cycle delay before we turn it back on. This fixes the following kind of warnings: WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]() WARN_ON(!power_domains->domain_use_count[domain]) ... v2: Fix typos in comment (David) Cc: [email protected] Cc: Matwey V. Kornilov <[email protected]> Tested-by: Matwey V. Kornilov <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695 Signed-off-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: David Weinehall <[email protected]>
2016-12-22drm/i915/ddi: Rely on VBT DDI port info for eDP detectionImre Deak3-1/+6
There is at least one APL based system using port A in DP mode (connecting to an on-board DP->VGA adaptor). Atm we'll configure port A unconditionally as eDP which is incorrect in this case. Fix this by relying on the VBT DDI port 'internal port' flag instead on all ports on DDI platforms. For now chicken out from using VBT for port A before GEN9. v2: - Move the DDI port info lookup to intel_bios_is_port_edp() (David, Jani) - Use the DDI port info on all DDI platforms starting from port B. Cc: Ville Syrjälä <[email protected]> Cc: Jani Nikula <[email protected]> Cc: David Weinehall <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> (v1) Reviewed-by: David Weinehall <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-22drm/i915: Check num_pipes before initializing audio componentElaine Wang1-0/+3
when num_pipes is zero, it indicates there is no display and HDMI audio doesn't exist. v2: Move the check from caller to callee for consistency. Cc: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Jani Nikula <[email protected]> Signed-off-by: Elaine Wang <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-21drm/i915/glk: Add new bit fields in MIPI CTRL registerDeepak M1-0/+15
v2: Addressed Jani's Review comments (renamed bit field macros) Signed-off-by: Deepak M <[email protected]> Signed-off-by: Madhav Chauhan <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-21ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() usersLv Zheng2-2/+4
This patch removes the users of the deprectated APIs: acpi_get_table_with_size() early_acpi_os_unmap_memory() The following APIs should be used instead of: acpi_get_table() acpi_put_table() The deprecated APIs are invented to be a replacement of acpi_get_table() during the early stage so that the early mapped pointer will not be stored in ACPICA core and thus the late stage acpi_get_table() won't return a wrong pointer. The mapping size is returned just because it is required by early_acpi_os_unmap_memory() to unmap the pointer during early stage. But as the mapping size equals to the acpi_table_header.length (see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when such a convenient result is returned, driver code will start to use it instead of accessing acpi_table_header to obtain the length. Thus this patch cleans up the drivers by replacing returned table size with acpi_table_header.length, and should be a no-op. Reported-by: Dan Williams <[email protected]> Signed-off-by: Lv Zheng <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-12-20drm/amdgpu: update tile table for oland/hainanFlora Cui1-139/+191
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update tile table for verdeFlora Cui1-2/+293
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update rev id for verdeFlora Cui1-1/+1
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update golden setting for verdeFlora Cui1-162/+142
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update rev id for olandFlora Cui1-0/+1
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update golden setting for olandFlora Cui1-13/+19
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update rev id for hainanFlora Cui1-0/+1
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update golden setting for hainanFlora Cui1-14/+23
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update rev id for pitcairnFlora Cui1-0/+1
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update golden setting for pitcairnFlora Cui1-10/+16
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/amdgpu: update golden setting/tiling table of tahitiFlora Cui2-161/+221
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2016-12-20drm/i915: Remove useless VLV_FEATURE Macro.Rodrigo Vivi1-18/+16
This macro got useless after commit 8d9c20e1d1e38 "drm/i915: Remove .is_mobile field from platform struct" that removed is_mobile split from VLV definition. Also this was never reused on any following platform. So let's clean up a bit here. Cc: Carlos Santa <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-20drm/i915: skip the first 4k of stolen memory on everything >= gen8Paulo Zanoni1-3/+2
BSpec got updated and this workaround is now listed as standard required programming for all subsequent projects. This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory). v2: this is the patch that fixes the screen flickering, document it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Cc: [email protected] Tested-by: Dominik Klementowski <[email protected]> Signed-off-by: Paulo Zanoni <[email protected]> Acked-by: Chris Wilson <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit d43537610470d8829ebd17cd7842f47176e35ebd) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: Fallback to single PAGE_SIZE segments for DMA remappingChris Wilson1-4/+22
If we at first do not succeed with attempting to remap our physical pages using a coalesced scattergather list, try again with one scattergather entry per page. This should help with swiotlb as it uses a limited buffer size and only searches for contiguous chunks within its buffer aligned up to the next boundary - i.e. we may prematurely cause a failure as we are unable to utilize the unused space between large chunks and trigger an error such as: i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes) Reported-by: Juergen Gross <[email protected]> Tested-by: Juergen Gross <[email protected]> Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Imre Deak <[email protected]> Cc: <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> (cherry picked from commit d766ef53006c2c38a7fe2bef0904105a793383f2) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: Fix use after free in logical_render_ring_initTvrtko Ursulin1-6/+1
Commit 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") introduced the dynanically allocated engine instances and created an potential use after free scenario in logical_render_ring_init where lrc_destroy_wa_ctx_obj could be called after the engine instance has been freed. This can only happen during engine setup/init error handling which luckily does not happen ever in practice. Fix is to not call lrc_destroy_wa_ctx_obj since it would have already been executed from the preceding engine cleanup. Signed-off-by: Tvrtko Ursulin <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") Cc: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit d038fc7e4fff14d6b026130007faef35cbf5e956) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: disable PSR by default on HSW/BDWPaulo Zanoni1-7/+3
We've been ignoring the poor bugzilla reporters that say PSR causes system lockups and all other sorts of problems. The earliest bug report is from April, so I think we can use the "revert the offending commit if no fixes are presented within 8 months" rule here. Fixes: 9b58e352b463 ("drm/i915: Enable PSR by default on Haswell and Broadwell.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985 Cc: <[email protected]> # v4.6+ Cc: Rodrigo Vivi <[email protected]> Cc: Jim Bride <[email protected]> Signed-off-by: Paulo Zanoni <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Acked-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2ee7dc497e348eecbb82adbb1ea9e9a7e29fe921) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: Fix setting of boost freq tunableMika Kuoppala1-1/+1
For limiting the max frequency of gpu, the max freq tunable is not enough to hard limit the max gap. We now have also per client boost max freq. When this tunable was introduced, it was mistakenly made read only. Allow user to gain control by setting it writable. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Cc: <[email protected]> # v4.9+ Cc: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Mika Kuoppala <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 73a798711314b54cbd4fe224e24db92c306a8d8c) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: tune down the fast link training vs boot failDaniel Vetter1-2/+2
It's been unfixed since a while and no one is immediately working on this. And we have the FIXME already. And now also a task in the DP team's backlog. Cc: Linus Torvalds <[email protected]> Cc: [email protected] Cc: Ville Syrjälä <[email protected]> References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.html Acked-by: Ville Syrjälä <[email protected]> [danvet: Adjust comment per Ville's feedback.] Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2dd85aeb5bc99e3763dd192cdb95ff405a102c8a) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: Reorder phys backing storage releaseChris Wilson1-19/+34
In commit a4f5ea64f0a8 ("drm/i915: Refactor object page API"), I reordered the object->pages teardown to be more friendly wrt to a separate obj->mm.lock. However, I overlooked the phys object and left it with a dangling use-after-free of its phys_handle. Move the allocation of the phys handle to get_pages and it release to put_pages to prevent the invalid access and to improve symmetry. v2: Add commentary about always aligning to page size. Testcase: igt/drv_selftest/objects Reported-by: Ville Syrjälä <[email protected]> Fixes: a4f5ea64f0a8 ("drm/i915: Refactor object page API") Signed-off-by: Chris Wilson <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: Joonas Lahtinen <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit dbb4351bab0a8440f6b02895c142bce6c30b7097) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915/gen9: Fix PCODE polling during SAGV disablingImre Deak1-25/+9
According to the previous patch, it's possible atm that we call intel_do_sagv_disable() only once during the 1ms period and time out if that call fails. As opposed to this the spec says that we need to keep retrying this request for a 1ms duration, so let's do this similarly to the CDCLK change notification request. v4-5: - Rebased on the reply_mask, reply change. v6: - Remove w/s change. (Lyude) - Rebased on the timeout_base argument change. Cc: Lyude <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Chris Wilson <[email protected]> Fixes: 656d1b89e5ff ("drm/i915/skl: Add support for the SAGV, fix underrun hangs") Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Lyude <[email protected]> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b3b8e99984a4eace91bc097e8f8cec71441cae16) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915/gen9: Fix PCODE polling during CDCLK change notificationImre Deak3-21/+87
commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <[email protected]> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Art Runyan <[email protected]> Cc: <[email protected]> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <[email protected]> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a0b8a1fe34430c3a82258e8cb45f5968bdf31afd) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is settingHans de Goede1-1/+2
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio. Fixes: a0a6d4ffd2ad ("drm/i915/dsi: add support for gpio elements on CHV") Cc: [email protected] Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Ville Syrjälä <[email protected]> (cherry picked from commit b2b45fcd921e864a5e9bbc7aa55dee96d5e11c06) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESETHans de Goede2-5/+11
Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Acked-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Ville Syrjälä <[email protected]> (cherry picked from commit 2b8208ac93be2783edc627fc02d9ca50cc479923) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from ↵Hans de Goede1-1/+12
vlv_init_display_clock_gating On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330 Cc: [email protected] Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Ville Syrjälä <[email protected]> (cherry picked from commit 721d484563e1a51ada760089c490cbc47e909756) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: drop the struct_mutex when wedged or trying to resetMatthew Auld1-1/+2
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <[email protected]> Signed-off-by: Matthew Auld <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: <[email protected]> # v4.7+ (cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85) Signed-off-by: Jani Nikula <[email protected]> (cherry picked from commit e411072d5740a49cdc9d0713798c30440757e451) Signed-off-by: Jani Nikula <[email protected]>
2016-12-20drm/i915: fully apply WaSkipStolenMemoryFirstPagePaulo Zanoni3-26/+22
Don't even tell the mm allocator to handle the first page of stolen on the affected platforms. This means that we won't inherit the FB in case the BIOS decides to put it at the start of stolen. But the BIOS should not be putting it at the start of stolen since it's going to get corrupted. I suppose the bug here is that some pixels at the very top of the screen will be corrupted, so it's not exactly easy to notice. We have confirmation that the first page of stolen does actually get corrupted, so I really think we should do this in order to avoid any possible future headaches, even if that means losing BIOS framebuffer inheritance. Let's not use the HW in a way it's not supposed to be used. Notice that now ggtt->stolen_usable_size won't reflect the ending address of the stolen usable range anymore, so we have to fix the places that rely on this. To simplify, we'll just use U64_MAX. v2: don't even put the first page on the mm (Chris) v3: drm_mm_init() takes size instead of end as argument (Ville) v4: add a comment explaining the reserved ranges (Chris) use 0 for start and U64_MAX for end when possible (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Cc: Chris Wilson <[email protected]> Signed-off-by: Paulo Zanoni <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-20drm/i915: skip the first 4k of stolen memory on everything >= gen8Paulo Zanoni1-3/+2
BSpec got updated and this workaround is now listed as standard required programming for all subsequent projects. This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory). v2: this is the patch that fixes the screen flickering, document it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Cc: [email protected] Tested-by: Dominik Klementowski <[email protected]> Signed-off-by: Paulo Zanoni <[email protected]> Acked-by: Chris Wilson <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-12-20drm/i915: Add a test that we terminate the trimmed sgtable as expectedChris Wilson1-0/+1
In commit 0c40ce130e38 ("drm/i915: Trim the object sg table"), we expect to copy exactly orig_st->nents across and allocate the table thusly. The copy loop should therefore end with the new_sg being NULL. Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]>
2016-12-20drm/i915: Fallback to single PAGE_SIZE segments for DMA remappingChris Wilson1-4/+22
If we at first do not succeed with attempting to remap our physical pages using a coalesced scattergather list, try again with one scattergather entry per page. This should help with swiotlb as it uses a limited buffer size and only searches for contiguous chunks within its buffer aligned up to the next boundary - i.e. we may prematurely cause a failure as we are unable to utilize the unused space between large chunks and trigger an error such as: i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes) Reported-by: Juergen Gross <[email protected]> Tested-by: Juergen Gross <[email protected]> Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Imre Deak <[email protected]> Cc: <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]>
2016-12-20drm/i915/breadcrumbs: s/container_of/rb_entry/Chris Wilson1-2/+2
In keeping with commit f802cf7e0986 ("drm/i915/debugfs: use rb_entry()"), convert the primary user of the rbtrees over to using rb_entry rather than the equivalent container_of. Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.