| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As the removed comments say, these aren't DT based devices.
of_dma_configure() is going to stop allowing a NULL DT node and calling
it will no longer work.
The comment is also now out of date as of commit 9ab91e7c5c51 ("arm64:
default to the direct mapping in get_arch_dma_ops"). Direct mapping
is now the default rather than dma_dummy_ops.
According to Stefano and Oleksandr, the only other part needed is
setting the DMA masks and there's no reason to restrict the masks to
32-bits. So set the masks to 64 bits.
Cc: Robin Murphy <[email protected]>
Cc: Julien Grall <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Oleksandr Andrushchenko <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
The drm_sched_fence_ops_{scheduled,finished} are not exported
from the file so make them static to avoid the following
warnings from sparse:
drivers/gpu/drm/scheduler/sched_fence.c:131:28: warning: symbol 'drm_sched_fence_ops_scheduled' was not declared. Should it be static?
drivers/gpu/drm/scheduler/sched_fence.c:137:28: warning: symbol 'drm_sched_fence_ops_finished' was not declared. Should it be static?
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Another panel that needs 6BPC quirk.
BugLink: https://bugs.launchpad.net/bugs/1819968
Cc: <[email protected]> # v4.8+
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We have a src and dect rectangle, use it instead of relying on
the core drm properties.
Because the core by default clips the src/dst properties, after
the drm_atomic_helper_check_plane_state() we manually set the
unclipped src/dst rectangles. We still need the call for
visibility checks, but this way we are able to use the src/dst
rects in the check/commit code.
This removes the special case in the watermark code for cursor w/h.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
[mlankhorst: Clarify commit message to state we use unclipped src/dst
|
|
This can all be done from the intel_update_crtc function. Split out the
pipe update into a separate function, just like is done for the planes.
Pull in all the changes done during fastset as well. It makes no sense
for it to still exist as a separate function.
Changes since v1:
- Inline intel_update_pipe_config()
Changes since v2:
- Add comments suggested by matt.
- Reorder commit_pipe_config() to remove all nesting. (Ville, Matt)
- Use intel_set_pipe_src_size((). (Matt)
Changes since v3:
- Move atomic_update_watermarks closer to the plane calls.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Matt Roper <[email protected]>
[mlankhorst: Replace 8 spaces with tabs in comment]
|
|
We need to look at the hw fb in the plane split, so replace all the places
that use drm_plane_state with intel_plane_state.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
[mlankhorst: Fix line wraps (Matt Roper)]
Reviewed-by: Matt Roper <[email protected]>
|
|
Instead of looking at drm_plane_state, look at intel_plane_state directly.
This will allow us to make the watermarks bigjoiner aware, when we make it
work for bigjoiner slave pipes as well.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
|
|
Using for_each_intel_plane_mask() fails because of an extra bracket,
remove the bracket so we can use it in the next commit.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
|
|
Remove duplicated include.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Private atomic objects have grown their own locking with
commit b962a12050a387e4bbf3a48745afe1d29d396b0d
Author: Rob Clark <[email protected]>
Date: Mon Oct 22 14:31:22 2018 +0200
drm/atomic: integrate modeset lock with private objects
which means we're no longer relying on connection_mutex for mst state
locking needs.
Cc: Lyude Paul <[email protected]>
Cc: Sean Paul <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
[cherry-picked to drm-misc-fixes: drm-misc-next commit dfef959803c7]
Commit 554b3529fe01 ("thermal/drivers/core: Remove the module Kconfig's
option") changed the type of THERMAL from tristate to bool, so
THERMAL || !THERMAL is now always y. Remove the redundant dependency.
Discovered through Kconfiglib detecting a dependency loop. The C tools
simplify the expression to y before running dependency loop detection,
and so don't see it. Changing the type of THERMAL back to tristate makes
the C tools detect the same loop.
Not sure if running dep. loop detection after simplification can be
called a bug. Fixing this nit unbreaks Kconfiglib on the kernel at
least.
Signed-off-by: Ulf Magnusson <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927174218.GA32085@huvuddator
|
|
Make sure that we copy across the registers from one engine to the next,
as we hop around a virtual engine.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the BUG_ON around slightly and add some explanations for each to
try and capture the expected state more carefully. We want to compare
the expected active state of our bookkeeping as compared to the tracked
HW state.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111937
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This patch enables Dynamic Range and Mastering InfoFrame on H6.
Cc: Maxime Ripard <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/HE1PR06MB40119DBC0DAE7BA251DF7074AC9B0@HE1PR06MB4011.eurprd06.prod.outlook.com
|
|
This patch enables Dynamic Range and Mastering InfoFrame on GXL, GXM and G12A.
Cc: Neil Armstrong <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/HE1PR06MB4011BB614A49253FD074BCCBAC9B0@HE1PR06MB4011.eurprd06.prod.outlook.com
|
|
This patch enables Dynamic Range and Mastering InfoFrame on RK3328 and RK3399.
Cc: Sandy Huang <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/HE1PR06MB4011C9579CA6BBCD96C87810AC9B0@HE1PR06MB4011.eurprd06.prod.outlook.com
|
|
Add support for configuring Dynamic Range and Mastering InfoFrame from
the hdr_output_metadata connector property.
This patch adds a use_drm_infoframe flag to dw_hdmi_plat_data that platform
drivers use to signal when Dynamic Range and Mastering infoframes is supported.
This flag is needed because Amlogic GXBB and GXL report same DW-HDMI version,
and only GXL support DRM InfoFrame.
These changes were based on work done by Zheng Yang <[email protected]>
to support DRM InfoFrame on the Rockchip 4.4 BSP kernel at [1] and [2]
[1] https://github.com/rockchip-linux/kernel/tree/develop-4.4
[2] https://github.com/rockchip-linux/kernel/commit/d1943fde81ff41d7cca87f4a42f03992e90bddd5
Cc: Zheng Yang <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/HE1PR06MB4011D7B916CBF8B740ACC45FAC9B0@HE1PR06MB4011.eurprd06.prod.outlook.com
|
|
If we have a wedged GPU that we need to recover, but fail, add a taint
for CI to pickup and schedule a reboot.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Petri Latvala <[email protected]>
Reviewed-by: Janusz Krzysztofik <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
According to the downstream Android sources, the anx7808 variants use
address 0x78 for TX_P0 and the anx781x variants use address 0x70. Since
the datasheets aren't available for these devices, and we only have the
downstream kernel sources to look at, let's assume that these addresses
are fixed based on the model, and pass the i2c addresses to the driver
via the data pointer in the driver's of_match_table.
Signed-off-by: Brian Masney <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
max_tu_symbol was programmed to TU_SIZE_RECOMMENDED - 1, which is not
what the spec says. The spec says:
roundup ((input active video bandwidth in bytes/output active video
bandwidth in bytes) * tu_size)
It is not quite clear what the above means, but calculating
max_tu_symbol = (input Bps / output Bps) * tu_size seems to work and
fixes the issues seen.
This fixes artifacts in some videomodes (e.g. 1024x768@60 on 2-lanes &
1.62Gbps was pretty bad for me).
Signed-off-by: Tomi Valkeinen <[email protected]>
Tested-by: Jyri Sarha <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are small differences between the blitter and the video engines in
the xcs context image (e.g. registers 0x200 and 0x204 only exist on the
blitter). Since we never explicitly set a value for those register and
given that we don't need to update the offsets in the lrc image when we
change engine within the class for virtual engine because the HW can
handle that, instead of having a separate define for the BCS we can
just restrict the programming to the part we're interested in, which is
common across the engines.
Bspec: 45584
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Stuart Summers <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The specs don't mention any specific HW limitation on the blitter and
manual inspection shows that the HW does set the relative MMIO bit in
the LRI of the blitter context image, so we can remove our limitations.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
commit d6abe6df706c ("drm/bridge: sil_sii8620: do not have a dependency
of RC_CORE") changed the driver to select both RC_CORE and INPUT.
However, this causes problems with other drivers, in particular an input
driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate
commit):
drivers/clk/Kconfig:9:error: recursive dependency detected!
drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS
drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI
drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI
drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT
drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620
drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111
drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK
According to the docs and general consensus, select should only be used
for non user-visible symbols, but both RC_CORE and INPUT are
user-visible. Furthermore almost all other references to INPUT
throughout the kernel config are depends, not selects. For this reason
the first part of this change reverts the commit.
In order to address the original reason for the commit, namely
that not all boards use the remote controller functionality and hence
should not need have to deal with RC_CORE, the second part of this
change now makes the remote control support in the driver optional and
contingent on RC_CORE being defined. And with this the hard dependency
on INPUT also goes away as that is only needed if RC_CORE is defined
(which in turn already depends on INPUT).
CC: Inki Dae <[email protected]>
CC: Andrzej Hajda <[email protected]>
CC: Laurent Pinchart <[email protected]>
CC: Dmitry Torokhov <[email protected]>
Signed-off-by: Ronald Tschalär <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
[a.hajda: applied fixup provided by Arnd Bergmann]
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move from the deprecated i2c_new_dummy() to devm_i2c_new_dummy_device().
We now get an ERRPTR which we use in error handling and we can skip
removal of the created devices.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The active/pending execlists is no longer protected by the
engine->active.lock, but is serialised by the tasklet instead. Update
the locking around the debug and stats to follow suit.
v2: local_bh_disable() to prevent recursing into the tasklet in case we
trigger a softirq (Tvrtko)
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c36eebd9ba5d70b84e1e7408ccc7632566f285c4)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Now that we dropped the engine->active.lock serialisation from around
process_csb(), direct submission can run concurrently to the interrupt
handler. As such execlists->active may be advanced as we dequeue,
dropping the reference to the request. We need to employ our RCU request
protection to ensure that the request is not freed too early.
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c949ae431467764277cdd88d7c26ff963a9db40a)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Due to the nature of preempt-to-busy the execlists active tracking and
the schedule queue may become temporarily desync'ed (between resubmission
to HW and its ack from HW). This means that we may have unwound a
request and passed it back to the virtual engine, but it is still
inflight on the HW and may even result in a GPU hang. If we detect that
GPU hang and try to reset, the hanging request->engine will no longer
match the current engine, which means that the request is not on the
execlists active list and we should not try to find an older incomplete
request. Given that we have deduced this must be a request on a virtual
engine, it is the single active request in the context and so must be
guilty (as the context is still inflight, it is prevented from being
executed on another engine as we process the reset).
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit cb2377a919bbe8107af269c5a31a8d5cfb27d867)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
If we are asked to submit a completed request, just move it onto the
active-list without modifying it's payload. If we try to emit the
modified payload of a completed request, we risk racing with the
ring->head update during retirement which may advance the head past our
breadcrumb and so we generate a warning for the emission being behind
the RING_HEAD.
v2: Commentary for the sneaky, shared responsibility between functions.
v3: Spelling mistakes and bonus assertion
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c0bb487dc19fc45dbeede7dcf8f513df51a3cd33)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Since amalgamating the queued and active lists in commit 422d7df4f090
("drm/i915: Replace engine->timeline with a plain list"), performing a
i915_request_submit() will remove the request from the execlists
priority queue.
References: 422d7df4f090 ("drm/i915: Replace engine->timeline with a plain list")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3231f8c01121ee1febfd82398ee22f7ff9dc5d76)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The CMP PCH ID we have in the driver is correct for the CML-U machines we have
in our CI system, but the CML-S and CML-H CI machines appear to use a
different PCH ID, leading our driver to detect no PCH for them.
Cc: Rodrigo Vivi <[email protected]>
Cc: Anusha Srivatsa <[email protected]>
References: 729ae330a0f2e2 ("drm/i915/cml: Introduce Comet Lake PCH")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461
Signed-off-by: Matt Roper <[email protected]>
Acked-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Fixes: 729ae330a0f2e2 ("drm/i915/cml: Introduce Comet Lake PCH")
(cherry picked from commit 8698ba53cd7173c32320ebbef4d389d41ebb5780)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
I'm embarassed to say that even though I've touched
vop_crtc_mode_fixup() twice and I swear I tested it, there's still a
stupid glaring bug in it. Specifically, on veyron_minnie (with all
the latest display timings) we want to be setting our pixel clock to
66,666,666.67 Hz and we tell userspace that's what we set, but we're
actually choosing 66,000,000 Hz. This is confirmed by looking at the
clock tree.
The problem is that in drm_display_mode_from_videomode() we convert
from Hz to kHz with:
dmode->clock = vm->pixelclock / 1000;
...and drm_display_mode_from_videomode() is called from panel-simple
when we have an "override_mode" like we do on veyron_minnie. See
commit 123643e5c40a ("ARM: dts: rockchip: Specify
rk3288-veyron-minnie's display timings").
...so when the device tree specifies a clock of 66666667 for the panel
then DRM translates that to 66666000. The clock framework will always
pick a clock that is _lower_ than the one requested, so it will refuse
to pick 66666667 and we'll end up at 66000000.
While we could try to fix drm_display_mode_from_videomode() to round
to the nearest kHz and it would fix our problem, it wouldn't help if
the clock we actually needed was 60,000,001 Hz. We could
alternatively have DRM always round up, but maybe this would break
someone else who already baked in the assumption that DRM rounds down.
Specifically note that clock drivers are not consistent about whether
they round up or round down when you call clk_set_rate(). We know how
Rockchip's clock driver works, but (for instance) you can see that on
most Qualcomm clocks the default is clk_rcg2_ops which rounds up.
Let's solve this by just adding 999 Hz before calling
clk_round_rate(). This should be safe and work everywhere. As
discussed in more detail in comments in the commit, Rockchip's PLLs
are configured in a way that there shouldn't be another PLL setting
that is only a few kHz off so we won't get mixed up.
NOTE: if this is picked to stable, it's probably easiest to first pick
commit 527e4ca3b6d1 ("drm/rockchip: Base adjustments of the mode based
on prev adjustments") which shouldn't hurt in stable.
Fixes: b59b8de31497 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003114726.v2.1.Ib233b3e706cf6317858384264d5b0ed35657456e@changeid
|
|
The active/pending execlists is no longer protected by the
engine->active.lock, but is serialised by the tasklet instead. Update
the locking around the debug and stats to follow suit.
v2: local_bh_disable() to prevent recursing into the tasklet in case we
trigger a softirq (Tvrtko)
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that we dropped the engine->active.lock serialisation from around
process_csb(), direct submission can run concurrently to the interrupt
handler. As such execlists->active may be advanced as we dequeue,
dropping the reference to the request. We need to employ our RCU request
protection to ensure that the request is not freed too early.
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
panfrost_core_dump() has never existed in mainline, so remove it and add
a TODO entry that core dump support is currently lacking.
Signed-off-by: Steven Price <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes: aa20236784ab ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
devm_regulator_get() is used to populate pfdev->regulator which ensures
that this cannot be NULL (a dummy regulator will be returned if
necessary). So remove the check in panfrost_devfreq_target().
Signed-off-by: Steven Price <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently the property docs don't specify whether it's okay for two planes to
have the same zpos value and what user-space should expect in this case.
The unspoken, legacy rule used in the past was to make user-space figure
out the zpos from object IDs. However some drivers break this rule,
that's why the ordering is documented as unspecified in case the zpos
property is missing. User-space should rely on the zpos property only.
There are some cases in which user-space might read identical zpos
values for different planes.
For instance, in case the property is mutable, user-space might set two
planes' zpos to the same value. This is necessary to support user-space
using the legacy DRM API where atomic commits are not possible:
user-space needs to update the planes' zpos one by one.
Because of this, user-space should handle multiple planes with the same
zpos.
While at it, remove the assumption that zpos is only for overlay planes.
Additionally, update the drm_plane_state.zpos docs to clarify that zpos
disambiguation via plane object IDs is a recommendation for drivers, not
something user-space can rely on. In other words, when user-space sets
the same zpos on two planes, drivers should rely on the plane object ID.
v2: clarify drm_plane_state.zpos docs (Daniel)
v3: zpos is for all planes (Marius, Daniel)
v4: completely reword the drm_plane_state.zpos docs to make it clear the
recommendation to use plane IDs is for drivers in case user-space uses
duplicate zpos values (Pekka)
v5: reword commit message (Pekka, James)
v6: remove mention of Arm GPUs having planes which can't overlap,
because this isn't uAPI yet (Daniel)
Signed-off-by: Simon Ser <[email protected]>
Reviewed-by: Pekka Paalanen <[email protected]>
Cc: Marius Vlad <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: James Qian Wang <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/T5nHrvXH0GKOp6ONaFHk-j2cwEb4_4C_sBz9rNw8mmPACuut-DQqC74HMAFKZH3_Q15E8a3YnmKCxap-djKA71VVZv_T-tFxaB0he13O7yA=@emersion.fr
|
|
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Polaris and vegam use count for the value rather than
level. This looks like a copy paste typo from when
the code was adapted from previous asics.
I'm not sure that the SMU actually uses this value, so
I don't know that it actually is a bug per se.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108609
Reported-by: Robert Strube <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
cleanup error handling code and make sure temporary info array
with the handles are freed by amdgpu_bo_list_put() on
idr_replace()'s failure.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This slightly simplifies the EHL DPLL4 handling and also gives us more
flexibility in the future in case we need to skip the use of specific
PLL's (e.g., due to hardware workarounds and such).
v2:
- Replace GENMASK() with or'd BIT()'s to make the specific DPLLs more
explicit. (Ville)
- s/unsigned/unsigned long/. (Lucas)
Cc: Lucas De Marchi <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
I hit the following error when compile the kernel.
drivers/gpu/drm/vkms/vkms_composer.o: In function `vkms_composer_worker':
vkms_composer.c:(.text+0x5e4): undefined reference to `crc32_le'
make: *** [vmlinux] Error 1
Signed-off-by: zhong jiang <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Moved common code to check gamma_enable to specific funcs per platform
in bit_precision func. icl doesn't support that and chv has separate
enable knob for CGM LUT.
v2:
-Simplified chv_gamma_precision() [Ville]
Signed-off-by: Swati Sharma <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Premature gamma lut prepration and loading which was getting
reflected in first modeset causing different colors on
screen during boot.
Issue: In BIOS, gamma is disabled by default. However, legacy read_luts()
was setting crtc_state->base.gamma_lut and gamma_lut was programmed
with junk values which led to visual artifacts (different
colored screens instead of usual black during boot).
Fix: Calling read_luts() only when gamma is enabled which will happen
after first modeset.
This fix is independent from the revert 1b8588741fdc ("Revert
"drm/i915/color: Extract icl_read_luts()"") and should fix different colors
on screen in legacy platforms too.
v2:
-Added gamma_enable checks inside read_luts() [Ville/Jani N]
-Corrected gamma enable check for CHV [Ville]
v3:
-Added check in ilk_read_luts() [Ville]
-Simplified gamma enable check for CHV [Ville]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111809
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111885
Tested-by: Jani Saarinen <[email protected]>
Signed-off-by: Swati Sharma <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Refer to EDID 1.3 spec, display FEATURE (byte 18h) bit #0 said
"If this bit is set to 1, the display supports timings based on the
GTF standard using default GTF parameter values".
And EDID 1.4 spec shows "If bit 0 is set to 0, then the display
is noncontinuous frequency (multi-mode) and is only specified to accept
the video timing formats that are listed in BASE EDID and certain
EXTENSION Blocks.
When display feature did not support CVT or GFT2 and monitor's EDID version
greater than or equal to "1.2". DRM driver would select GTF as default
for standard timing calculation. It may generated some video timing
that can't display properly by external monitor.
For example. When driver retrieved "0xD1 0xFC" (FHD, 120Hz) and
"0xD1 0xE8" (FHD, 100Hz) from "Standard Timings". GTF formula
would generate video timing like below. It already over monitor's
spec to cause black screen issue.
"1920x1080" 120 368881 1920 2072 2288 2656 1080 1081 1084 1157 0x0 0x6
"1920x1080" 100 301992 1920 2072 2280 2640 1080 1081 1084 1144 0x0 0x6
v2: Just confirm GTF flag and omit the revision check.
Cc: Jani Nikula <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Adam Jackson <[email protected]>
Cc: Cooper Chiou <[email protected]>
Signed-off-by: Lee Shawn C <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In the case where data fails to be allocated the error exit path is
via label 'out' where data is dereferenced in a for-loop. Fix this
by exiting via the label 'out_file' instead to avoid the null pointer
dereference.
Addresses-Coverity: ("Dereference after null check")
Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Mutex has no clock in some SoC, so add no_clk in private data and get
clock according to no_clk.
Signed-off-by: CK Hu <[email protected]>
|
|
mutex sof register offset will be private data of ddp
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: CK Hu <[email protected]>
|
|
mutex sof will be ddp private data
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: CK Hu <[email protected]>
|
|
mutex mod register offset will be private data of ddp.
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: CK Hu <[email protected]>
|