aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2020-08-06drm/amd/display: Disable idle optimizations before programming DCNJun Lei1-2/+16
[Why] Programming DCN is explicitly forbidden during idle optimzations allowed state. Existing implemenation relies on OS/DM, which is not robust. Instead DC should sequence this. Note that DC will not re-enter idle optimized state on its own, it is only responsible for catching out of sequence calls. It is still DM responsibility to sequence appropriate for optimized power, but this change removes the requirement for DM to cover the .1% case. [How] - elevate updates during idle optimized state to full updates - disable idle power optimizations prior to programming Signed-off-by: Jun Lei <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Fix dmesg warning from setting abm levelStylon Wang1-0/+23
[Why] Setting abm level does not correctly update CRTC state. As a result no surface update is added to dc stream state and triggers warning. [How] Correctly update CRTC state when setting abm level property. CC: Stable <[email protected]> Signed-off-by: Stylon Wang <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Use proper abm/backlight functions for DCN3Bhawanpreet Lakha1-2/+3
Use DCN21 functions instead of DCE110 Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Use seperate dmcub firmware for navy_flounderBhawanpreet Lakha1-1/+6
[Why] Currently navy_flounder is using sienna_cichlid_dmcub.bin. [How] Create a seperate define so navy_flounder will use its own firmware. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Check lane status again after link training doneMartin Tsai2-0/+52
[Why] Some monitors could suffer symbol unlock but cannot send HPD IRQ to notic source device to handle link loss. This makes monitor stuck in abnormal status and causes black screen. [How] According to the suggestion from scalar vendor, to check lane status again after link training done. That can improve the comaptibility from current production monitors. Signed-off-by: Martin Tsai <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Don't compare dppclk before updating DTOAlvin Lee1-3/+4
[Why] In dcn3_update_clocks there are situations where dppclk is not lowered (i.e. stays the same), but DTO still needs to be increased before we program pipe frontend (i.e. in prepare_bandwidth). If we don't program the new DTO value before we program the pipe, we will underflow as soon as the pipe lock is released until the next call to dcn3_update_clocks where the DTO is updated. [How] Remove dppclk check before programming new DTO value. Signed-off-by: Alvin Lee <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Fix naming of DSC Debugfs entryEryk Brol1-4/+5
[why] Fix naming and return bits rather than bytes per pixel for naming consistency. Because registers return Bytes per pixel, but DSC Config structure is expecting bits per pixel as input. So when returning the value convert from bytes into bits. Signed-off-by: Eryk Brol <[email protected]> Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Mikita Lipski <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol4-4/+6
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <[email protected]> Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Mikita Lipski <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/display: Clean up global sync param retrievalDmytro Laktyushkin3-63/+7
[Why] This change replaces older looping code in favor of these functions. [How] There are built in functions for extracting global sync params during mode validation now. Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Bernstein <[email protected]> Acked-by: Eryk Brol <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/swsmu: allow asic to handle sensor type by itselfKevin Wang1-2/+7
1. allow asic to handle sensor type by itself. 2. if not, use smu common sensor to handle it. Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()Dan Carpenter1-5/+5
These tables have _COUNT number of elements so the comparisons should be >= instead of > to prevent reading one element beyond the end of the array. Fixes: 8264ee69f0d8 ("drm/amd/powerplay: drop unused code") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao3-10/+24
Update sienna_cichlid driver if header and related files. Support new smu metrics for pre & postDS frequency. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: drop unnecessary message support check(v2)Changfeng2-10/+1
Take back patch:drop unnecessary message support check Because the gpu reset fail problem on renoir can be fixed by: drm/amd/powerplay: skip invalid msg when smu set mp1 state It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear code layer. Signed-off-by: changfeng <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu: update dec ring test for VCN 3.0Boyuan Zhang1-1/+1
Signed-off-by: Boyuan Zhang <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu/jpeg3.0: remove extra asic type checkJames Zhu1-5/+4
jpeg ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu: update golden setting for sienna_cichlidLikun Gao1-1/+1
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: correct smu message for vf modeLikun Gao1-35/+35
Set valid_in_vf to false for the message not support in vf mode on sienna cichlid. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: add msg map for mode1 resetLikun Gao1-0/+1
Mapping Mode1Reset message for sienna_cichlid. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: skip invalid msg when smu set mp1 stateLikun Gao1-0/+3
Some asic may not support for some message of set mp1 state. If the return value of smu_send_smc_msg is -EINVAL, that means it failed to send msg to smc as it can not map an valid message for the ASIC. And with that case, smu_set_mp1_state should be skipped as those ASIC was in fact do not support for that. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amd/powerplay: remove the dpm checking in the boot sequenceKenneth Feng1-1/+1
It's not necessary to retrieve the power features status when the asic is booted up the first time. This patch can have the features enablement status still checked in suspend/resume case and removed from the first boot up sequence. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06Revert "drm/amd/powerplay: drop unnecessary message support check"Changfeng2-1/+10
The below 3 messages are not supported on Renoir SMU_MSG_PrepareMp1ForShutdown SMU_MSG_PrepareMp1ForUnload SMU_MSG_PrepareMp1ForReset It needs to revert patch: drm/amd/powerplay: drop unnecessary message support check to avoid set mp1 state fail during gpu reset on renoir. Signed-off-by: changfeng <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu: add printing after executing page reservation to eepromGuchun Chen1-1/+4
This will tell users if the faulty page has been written to external eeprom device in dmesg log. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu: expand sienna chichlid reg access supportJohn Clements1-0/+45
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-06drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_ERROR error message. Fix it. This got lost in a merge, restore the fix. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 4afaa61db9cf5250b5734c2531b226e7b3a3d691)
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds3-18/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-06Merge branch 'WIP.locking/seqlocks' into locking/urgentIngo Molnar1-2/+0
Pick up the full seqlock series PeterZ is working on. Signed-off-by: Ingo Molnar <[email protected]>
2020-08-05Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1271-27843/+268258
Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...
2020-08-05Merge tag 'for-linus-hmm' of ↵Linus Torvalds5-160/+225
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "Ralph has been working on nouveau's use of hmm_range_fault() and migrate_vma() which resulted in this small series. It adds reporting of the page table order from hmm_range_fault() and some optimization of migrate_vma(): - Report the size of the page table mapping out of hmm_range_fault(). This makes it easier to establish a large/huge/etc mapping in the device's page table. - Allow devices to ignore the invalidations during migration in cases where the migration is not going to change pages. For instance migrating pages to a device does not require the device to invalidate pages already in the device. - Update nouveau and hmm_tests to use the above" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm/test: use the new migration invalidation nouveau/svm: use the new migration invalidation mm/notifier: add migration invalidation type mm/migrate: add a flags parameter to migrate_vma nouveau: fix storing invalid ptes nouveau/hmm: support mapping large sysmem pages nouveau: fix mapping 2MB sysmem pages nouveau/hmm: fault one page at a time mm/hmm: add tests for hmm_pfn_to_map_order() mm/hmm: provide the page mapping order in hmm_range_fault()
2020-08-05Merge tag 'driver-core-5.9-rc1' of ↵Linus Torvalds2-19/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of changes to the driver core, and some drivers using the changes, for 5.9-rc1. "Biggest" thing in here is the device link exposure in sysfs, to help to tame the madness that is SoC device tree representations and driver interactions with it. Other stuff in here that is interesting is: - device probe log helper so that drivers can report problems in a unified way easier. - devres functions added - DEVICE_ATTR_ADMIN_* macro added to make it harder to write incorrect sysfs file permissions - documentation cleanups - ability for debugfs to be present in the kernel, yet not exposed to userspace. Needed for systems that want it enabled, but do not trust users, so they can still use some kernel functions that were otherwise disabled. - other minor fixes and cleanups The patches outside of drivers/base/ all have acks from the respective subsystem maintainers to go through this tree instead of theirs. All of these have been in linux-next with no reported issues" * tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) drm/bridge: lvds-codec: simplify error handling drm/bridge/sii8620: fix resource acquisition error handling driver core: add deferring probe reason to devices_deferred property driver core: add device probe log helper driver core: Avoid binding drivers to dead devices Revert "test_firmware: Test platform fw loading on non-EFI systems" firmware_loader: EFI firmware loader must handle pre-allocated buffer selftest/firmware: Add selftest timeout in settings test_firmware: Test platform fw loading on non-EFI systems driver core: Change delimiter in devlink device's name to "--" debugfs: Add access restriction option tracefs: Remove unnecessary debug_fs checks. driver core: Fix probe_count imbalance in really_probe() kobject: remove unused KOBJ_MAX action driver core: Fix sleeping in invalid context during device link deletion driver core: Add waiting_for_supplier sysfs file for devices driver core: Add state_synced sysfs file for devices that support it driver core: Expose device link details in sysfs driver core: Drop mention of obsolete bus rwsem from kernel-doc debugfs: file: Remove unnecessary cast in kfree() ...
2020-08-05drm/virtio: convert to LE accessorsMichael S. Tsirkin1-8/+8
Virtgpu is modern-only. Use LE accessors for config space. Signed-off-by: Michael S. Tsirkin <[email protected]>
2020-08-05Merge tag 'drm-msm-next-2020-07-30' of ↵Dave Airlie59-1600/+7167
https://gitlab.freedesktop.org/drm/msm into drm-next Take 2 of msm-next pull, this version drops the OPP patch due to [1], so I'll send the gpu opp/bw scaling patch after the OPP patch lands. Since I had to force-push I took the opportunity to rebase on drm-next, and since you already merged in 5.8-rc6 a few fixes from the last cycle dropped out. This time around: * A bunch more a650/a640 (sm8150/sm8250) display and GPU enablement and fixes * Enable dpu dither block for 6bpc panels * dpu suspend fixes * dpu fix for cursor on 2nd display * dsi/mdp5 enablement for sdm630/sdm636/sdm660 I also regenerated the register headers, which accounts for a good bit of the size this time, because we hadn't re-synced the register headers since the early days of a6xx bringup. Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGs_eswoX-E0Ddg5DoEQy35x3GG+6SDXUAjPMrtAWFkqng@mail.gmail.com
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds7-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong1-3/+4
drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <[email protected]> # v4.12+ Signed-off-by: Xiyu Yang <[email protected]> Signed-off-by: Xin Tan <[email protected]> Signed-off-by: Xin Xiong <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
2020-08-04drm: Added orientation quirk for ASUS tablet model T103HAFMarius Iacob1-0/+6
Signed-off-by: Marius Iacob <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-04drm/omap: force runtime PM suspend on system suspendTomi Valkeinen4-0/+4
Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM suspend and resume. We use suspend late version so that omapdrm's system suspend callback is called first, as that will disable all the display outputs after which it's safe to force DSS into suspend. Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Tony Lindgren <[email protected]> Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data") Cc: [email protected] # v5.7+ Tested-by: Tony Lindgren <[email protected]>
2020-08-04drm/tidss: fix modeset init for DPI panelsTomi Valkeinen1-1/+1
The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen <[email protected]> Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: [email protected] # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jyri Sarha <[email protected]>
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-03virtio: virtio_has_iommu_quirk -> virtio_has_dma_quirkMichael S. Tsirkin2-3/+3
Now that the corresponding feature bit has been renamed, rename the quirk too - it's about special ways to do DMA, not necessarily about the IOMMU. Signed-off-by: Michael S. Tsirkin <[email protected]>
2020-08-01drm: xlnx: zynqmp: Use switch - case for link rate downshiftHyun Kwon1-13/+16
Use switch - case to downshift from the current link rate. It's a small loop now, so fine to be replaced with switch - case. With a loop, it is confusing and hard to follow as reported below. The patch d76271d22694: "drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem" from Jul 7, 2018, leads to the following static checker warning: drivers/gpu/drm/xlnx/zynqmp_dp.c:594 zynqmp_dp_mode_configure() error: iterator underflow 'bws' (-1)-2 Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Hyun Kwon <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-07-31Merge remote-tracking branch 'asoc/for-5.9' into asoc-nextMark Brown7-18/+28
2020-07-31drm/msm: use kthread_create_worker instead of kthread_runBernard3-15/+8
Use kthread_create_worker to simplify the code and optimise the manager struct: msm_drm_thread. With this change, we could remove struct element (struct task_struct *thread & struct kthread_worker worker), instead, use one point (struct kthread_worker *worker). Signed-off-by: Bernard Zhao <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/mdp5: Add MDP5 configuration for SDM636/660Konrad Dybcio1-0/+105
This commit adds support for the MDP5 IP on Snapdragon 636/660. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/dsi: Add DSI configuration for SDM660Konrad Dybcio2-0/+22
This also applies to sdm630/636 and their SDA counterparts. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/mdp5: Add MDP5 configuration for SDM630Konrad Dybcio1-0/+93
This commit adds support for the MDP5 IP on Snapdragon 630. The configuration is different from SDM660's, as the latter one has two DSI outputs. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/dsi: Add phy configuration for SDM630/636/660Konrad Dybcio3-0/+21
These SoCs make use of the 14nm phy, but at different addresses than other 14nm units. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/a6xx: add A640/A650 hwcgJonathan Marek3-4/+117
Initialize hardware clock-gating registers on A640 and A650 GPUs. At least for A650, this solves some performance issues. Signed-off-by: Jonathan Marek <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/a6xx: hwcg tables in gpulistJonathan Marek3-14/+20
This will allow supporting different hwcg tables for a6xx. Signed-off-by: Jonathan Marek <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/dpu: add SM8250 to hw catalogJonathan Marek2-0/+109
This brings up basic video mode functionality for SM8250 DPU. Command mode and dual mixer/intf configurations are not working, future patches will address this. Scaler functionality and multiple planes is also untested. Signed-off-by: Jonathan Marek <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/dpu: add SM8150 to hw catalogJonathan Marek2-0/+149
This brings up basic video mode functionality for SM8150 DPU. Command mode and dual mixer/intf configurations are not working, future patches will address this. Scaler functionality and multiple planes is also untested. Signed-off-by: Jonathan Marek <[email protected]> [fixup max_linewidth warning] Signed-off-by: Rob Clark <[email protected]>
2020-07-31drm/msm/dpu: intf timing path for displayportJonathan Marek1-5/+15
Calculate the correct timings for displayport, from downstream driver. Signed-off-by: Jonathan Marek <[email protected]> Signed-off-by: Rob Clark <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.