| Age | Commit message (Collapse) | Author | Files | Lines |
|
Starting on LNL, there is a new GSCCS interrupt that is triggered when
the GSC engine reset fails. If the HW is in a bad state, this interrupt
might end up being triggered even if we're not using the engine, which
will lead to a warning because we'll see it as unexpected. Since there
is no point in handling the interrupt in this scenario, we can just
make sure the interrupts are off when we disable the engine.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Matt Roper <[email protected]>
Tested-by: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
This fixes commit c4f18703629d ("drm/xe: Add
xe_gt_tlb_invalidation_range and convert PT layer to use this")
which added the end variable as part of the function param.
v2: Add fixes tag(Matt)
Fixes: c4f18703629d ("drm/xe: Add xe_gt_tlb_invalidation_range and convert PT layer to use this")
Cc: Matthew Brost <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
In order to detect duplicate implementations for the same workaround,
early in the implementation of RTP it was decided to error out even if
the values set are exactly the same. With the introduction of 18034896535
in commit 74671d23ca18 ("drm/xe/xe2: Add workaround 18034896535"), LNL
stepping with graphics stepping A1 now gives the following error on
module load:
xe 0000:00:02.0: [drm] *ERROR* GT0: [GT OTHER] \
discarding save-restore reg e48c (clear: 00000200, set: 00000200,\
masked: yes, mcr: yes): ret=-22
RTP may be improved in the future, but for now simply join the entries
like done with e.g. "1607297627, 1607030317, 1607186500".
Fixes: 74671d23ca18 ("drm/xe/xe2: Add workaround 18034896535")
Cc: Bommu Krishnaiah <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Add Wa_14021490052 for Xe2HPG 20.01.
Signed-off-by: Shekhar Chauhan <[email protected]>
Reviewed-by: Gustavo Sousa <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
IGTs (e.g. xe_vm) can provide the exact same coverage as the PT update
selftest. The PT update selftest is dependent on internal functions
which can change thus maintaining this test is costly and provide no
extra coverage. Delete this test.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
xe_gt_tlb_invalidation_range accepts a start and end address rather than
a VMA. This will enable multiple VMAs to be invalidated in a single
invalidation. Update the PT layer to use this new function.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rather than adding a ufence to a VMA in the bind function, add the
ufence to all VMAs in the IOCTL that require binds in
vm_bind_ioctl_ops_fini. This help withs the transition to job 1 per VM
bind IOCTL.
v2:
- Rebase
v3:
- Fix typo in commit (Oak)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rather than checking for an unsignaled ufence ay unbind time, check for
this during the op_lock_and_prep function. This helps with the
transition to job 1 per VM bind IOCTL.
v2:
- Rebase
v3:
- Fix typo in commit message (Oak)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Simplify VM bind code by signaling out-fences / destroying VMAs in a
single location. Will help with transition single job for many bind ops.
v2:
- s/vm_bind_ioctl_ops_install_fences/vm_bind_ioctl_ops_fini (Oak)
- Set last fence in vm_bind_ioctl_ops_fini (Oak)
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This will help with moving to single jobs for many bind operations.
v2:
- Rebase
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In effort to make multiple VMA binds operations atomic (1 job), all
device page tables updates will be implemented via a xe_vma_ops (atomic
unit) interface,
Add xe_vma_rebind function which is implemented using xe_vma_ops
interface. Use xe_vma_rebind in GPU page faults for rebinds rather than
directly called deprecated function in PT layer.
v3:
- Update commit message (Oak)
v4:
- Fix tile_mask argument (CI)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Clean up everything in VM bind IOCTL in 1 path for both errors and
non-errors. Also move VM bind IOCTL cleanup from ops (also used by
non-IOCTL binds) to the VM bind IOCTL.
v2:
- Break ops_execute on error (Oak)
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
All page tables updates are moving to a xe_vma_ops interface to
implement 1 job per VM bind IOCTL. Convert xe_vm_rebind to use a
xe_vma_ops based interface.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Having a structure which encapsulates a list of VMA operations will help
enable 1 job for the entire list.
v2:
- Rebase
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
All non-binding operations in VM bind IOCTL should be in the lock and
prepare step rather than the execution step. Move prefetch to conform to
this pattern.
v2:
- Rebase
- New function names (Oak)
- Update stale comment (Oak)
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add ops_execute function which returns a fence. This will be helpful to
initiate all binds (VM bind IOCTL, rebinds in exec IOCTL, rebinds in
preempt rebind worker, and rebinds in pagefaults) via a gpuva ops list.
Returning a fence is needed in various paths.
v2:
- Rebase
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Lock all BOs used in gpuva ops and validate all BOs in a single step
during the VM bind IOCTL.
This help with the transition to making all gpuva ops in a VM bind IOCTL
a single atomic job which is required for proper error handling.
v2:
- Better commit message (Oak)
- s/op_lock/op_lock_and_prep, few other renames too (Oak)
- Use DRM_EXEC_IGNORE_DUPLICATES flag in drm_exec_init (local testing)
- Do not reserve slots in locking step (direction based on series from Thomas)
v3:
- Validate BO if is immediate set (Oak)
Cc: Oak Zeng <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Oak Zeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
There is a spelling mistake in a drm_dbg message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
The xe_gt_sriov_pf_init_early() and xe_gt_sriov_pf_init_hw() are
ideal places to call per-GT PF service init and update functions.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On older platforms (12.00) the PF driver must explicitly unblock
VF's modifications to the GGTT. On newer platforms this capability
is enabled by default.
Bspec: 49908, 53204
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The function xe_guc_submit_stop consistently returns 0 without an error
state, prompting the caller to verify it, which is redundant.
Cc: Matthew Brost <[email protected]>
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is no change in functionality. Using the helper function
defined within the driver for locking/unlocking the reservation
object.
Cc: Matthew Brost <[email protected]>
Cc: Ashutosh Dixit <[email protected]>
Suggested-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is no change in functionality. Using the helper function
defined within the driver.
-v2
Use xe_vm_unlock() (Ashutosh/Matt)
-v3
Use xe_vm_unlock() for error label too (Matt)
Reviewed-by: Badal Nilawar <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Ashutosh Dixit <[email protected]>
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.10-rc1:
UAPI Changes:
Cross-subsystem Changes:
- Devicetree updates for rockchip (#sound-dai-cells)
- Add dt bindings for new panels.
- Change bridge/tc358775 dt bindings.
Core Changes:
- Fix SIZE_HINTS cursor property doc.
- Parse topology blocks for all DispID < 2.0.
- Implement support for tracking cleared free memory, use it in amdgpu.
- Drop seq_file.h from drm_print.h, and include debugfs.h explicitly
where needed (drivers).
Driver Changes:
- Small fixes to rockchip, panthor, v3d, bridge chaining, xlx.
- Add Khadas TS050 V2, EDO RM69380 OLED, CSOT MNB601LS1-1 panels,
- Add SAM9X7 SoC's LVDS controller.
- More driver conversions to struct drm_edid.
- Support tc358765 in tc358775 bridge.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Exec queue has replaced engine nomenclature.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Normalize the alignment for readability.
v3:
- Fix typo in commit (Himal)
- Fix EXEC_QUEUE_STATE_WEDGED too (Himal)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Exec queue has replaced engine nomenclature.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Exec queue has replaced engine nomenclature.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Exec queue has replaced engine nomenclature.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes:
- Some DP/DP_MST DRM helpers (Imre)
Driver Changes (i915 Display):
- PLL refactoring (Ville)
- Limit eDP MSO pipe only for display version 20 (Luca)
- More display refactor towards independence from i915 dev_priv (Jani)
- QGV/SAGV related refactor (Stanislav)
- Few MTL/DSC and a UHBR monitor fix (Imre)
- BXT/GLK per-lane vswing and PHY reg cleanup (Ville)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
GuC submission_state.suspend is unused, delete it.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit 5b259c0d1d3caa6efc66c2b856840e68993f814e.
Cleanup here is good, however we need to able to flush a worker during
vm destruction which might involve sleeping, so bring back the worker.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It is really easy to introduce subtle deadlocks in
preempt_fence_work_func() since we operate on single global ordered-wq
for signalling our preempt fences behind the scenes, so even though we
signal a particular fence, everything in the callback should be in the
fence critical section, since blocking in the callback will prevent
other published fences from signalling. If we enlarge the fence critical
section to cover the entire callback, then lockdep should be able to
understand this better, and complain if we grab a sensitive lock like
vm->lock, which is also held when waiting on preempt fences.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Apart from the obvious spelling typo, use the correct values for
infinity quantum/timeout settings (it's 0x0 instead of 0xFFFFFFFF).
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.
v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe
v2: Also fix ivpu and vmwgfx
Reviewed-by: Andrzej Hajda <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Dmitry Baryshkov <[email protected]> # drm/msm
Acked-by: Matt Coster <[email protected]> # drm/imagination
Acked-by: Alex Deucher <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Acked-by: Robert Foss <[email protected]> #drm/bridge
Reviewed-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
For debug purposes we might want to verify which registers values
PF is sharing with VFs and to view which VF/PF ABI versions were
negotiated by the VFs. Plug the 'print' functions already provided
by the PF service code into our debugfs.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to intel_fbdev_setup() after i915 has registered its
DRM device. Just like similar code in other drivers, i915 fbdev
emulation now acts like a regular DRM client. Do the same for xe.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_client_dev_unregister() releases all in-kernel clients
automatically. No further action is required within i915. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy implements
the release. For partially initialized emulation, the fbdev client
reverts the initial setup. Do the same for xe and remove its call to
intel_fbdev_fini().
v8:
- setup client in intel_display_driver_register (Jouni)
- mention xe in commit message
v7:
- update xe driver
- reword commit message
v6:
- use 'i915' for i915 device (Jouni)
- remove unnecessary code for non-atomic mode setting (Jouni, Ville)
- fix function name in commit message (Jouni)
v3:
- as before, silently ignore devices without displays
v2:
- let drm_client_register() handle initial hotplug
- fix driver name in error message (Jani)
- fix non-fbdev build (kernel test robot)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display.
The DRM core calls both, the old callbacks and the new client
helpers, from the same places. The new functions perform the same
operation as before, so there's no change in functionality.
Fox xe, remove xe_display_last_close(), which restored the fbdev
display. As with i915, the DRM core's drm_lastclose() performs
this operation automatically.
v8:
- mention xe in commit message
v7:
- update xe driver
v6:
- return errors from client callbacks (Jouni)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Unregister all in-kernel clients before unloading the i915 driver. For
other drivers, drm_dev_unregister() does this automatically. As i915 and
xe do not use this helper, they have to perform the call by themselves.
Note that there are currently no in-kernel clients in i915 or xe. The
patch prepares the drivers for a related update of their fbdev support.
v8:
- unregister clients in intel_display_driver_unregister() (Jani)
- mention xe in commit message (Rodrigo, Jani)
v7:
- update xe driver
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Although it's unlikely that drmm_mutex_init() will fail during
driver initialization, however we shouldn't ignore this case.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Workaround 14021567978 applies to RenderCS xe2
V3:
- Cover xe2_hpg as its landed upstream now
V2(MattR):
- Move tuning to wa and apply to xe2
Signed-off-by: Tejas Upadhyay <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
We can use recently added str_plural() helper.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
So, the wedged mode can be selected per device at runtime,
before the tests or before reproducing the issue.
v2: - s/busted/wedged
- some locking consistency
v3: - remove mutex
- toggle guc reset policy on any mode change
Cc: Lucas De Marchi <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
In many validation situations when debugging GPU Hangs,
it is useful to preserve the GT situation from the moment
that the timeout occurred.
This patch introduces a module parameter that could be used
on situations like this.
If xe.wedged module parameter is set to 2, Xe will be declared
wedged on every single execution timeout (a.k.a. GPU hang) right
after devcoredump snapshot capture and without attempting any
kind of GT reset and blocking entirely any kind of execution.
v2: Really block gt_reset from guc side. (Lucas)
s/wedged/busted (Lucas)
v3: - s/busted/wedged
- Really use global_flags (Dafna)
- More robust timeout handling when wedging it.
v4: A really robust clean exit done by Matt Brost.
No more kernel warns on unbind.
v5: Simplify error message (Lucas)
Cc: Matthew Brost <[email protected]>
Cc: Dafna Hirschfeld <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Alan Previn <[email protected]>
Cc: Himanshu Somaiya <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Let's block the device upon any GuC load failure.
But let's continue with the probe so guc logs can be read
from the debugfs.
v2: - s/wedged/busted
- do not block probe or we lose guc_logs in debugfs (Matt)
v3: - s/busted/wedged
v4: Do not change __xe_guc_upload return. (Himal)
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Introduce a very simple 'wedged' state where any attempt
to access the GPU is entirely blocked.
On some critical cases, like on gt_reset failure, we need to
block any other attempt to use the GPU. Otherwise we are at
a risk of reaching cases that would force us to reboot the machine.
So, when this cases are identified we corner and block any GPU
access. No IOCTL and not even another GT reset should be attempted.
The 'wedged' state in Xe is an end state with no way back.
Only a device "re-probe" (unbind + bind) can restore the GPU access.
v2: - s/wedged/busted (Lucas)
- use unbind+bind instead of module reload (Lucas)
- added more info on unbind operations and instruction on bug report
- only print the message once.
v3: - s/busted/wedged (Ashutosh, Tvrtko, Thomas)
- don't assume user has sudo and tee available (Lucas)
v4: - remove unnecessary cases around ct communication or migration.
Cc: Ashutosh Dixit <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Anshuman Gupta <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
This registers contains important information that can help with debug
of GPU hangs.
While at it also fixing the double line jump at the end of engine
registers for CCS engines.
v2:
- print other INSTDONE registers
v3:
- add for_each_geometry/compute_dss()
v4:
- print one slice_common_instdone per glice in DG2+
v5:
- rename registers prefix from DG2 to XEHPG (Zhanjun)
Cc: Rodrigo Vivi <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Zhanjun Dong <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|