| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"This has two exciting community drivers for ARM Mali accelerators.
Since ARM has never been open source friendly on the GPU side of the
house, the community has had to create open source drivers for the
Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
series. Well done to all involved and hopefully this will help ARM
head in the right direction.
There is also now the ability if you don't have any of the legacy
drivers enabled (pre-KMS) to remove all the pre-KMS support code from
the core drm, this saves 10% or so in codesize on my machine.
i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
moves out of staging.
There are also some rcar-du patches which crossover with media tree
but all should be acked by Mauro.
Summary:
uapi changes:
- Colorspace connector property
- fourcc - new YUV formts
- timeline sync objects initially merged
- expose FB_DAMAGE_CLIPS to atomic userspace
new drivers:
- vboxvideo: moved out of staging
- aspeed: ASPEED SoC BMC chip display support
- lima: ARM Mali4xx GPU acceleration driver support
- panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support
core:
- component helper docs
- unplugging fixes
- devm device init
- MIPI/DSI rate control
- shmem backed gem objects
- connector, display_info, edid_quirks cleanups
- dma_buf fence chain support
- 64-bit dma-fence seqno comparison fixes
- move initial fb config code to core
- gem fence array helpers for Lima
- ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
- lease fixes
ttm:
- unified DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
panel:
- OSD070T1718-19TS panel support
- panel-tpo-td028ttec1 backlight support
- Ronbo RB070D30 MIPI/DSI
- Feiyang FY07024DI26A30-D MIPI-DSI panel
- Rocktech jh057n00900 MIPI-DSI panel
i915:
- Comet Lake (Gen9) PCI IDs
- Updated Icelake PCI IDs
- Elkhartlake (Gen11) support
- DP MST property addtions
- plane and watermark fixes
- Icelake port sync and VEBOX disable fixes
- struct_mutex usage reduction
- Icelake gamma fix
- GuC reset fixes
- make mmap more asynchronous
- sound display power well race fixes
- DDI/MIPI-DSI clocks for Icelake
- Icelake RPS frequency changing support
- Icelake workarounds
amdgpu:
- Use HMM for userptr
- vega20 experimental smu11 support
- RAS support for vega20
- BACO support for vega12 + fixes for vega20
- reworked IH interrupt handling
- amdkfd RAS support
- Freesync improvements
- initial timeline sync object support
- DC Z ordering fixes
- NV12 planes support
- colorspace properties for planes=
- eDP opts if eDP already initialized
nouveau:
- misc fixes
etnaviv:
- misc fixes
msm:
- GPU zap shader support expansion
- robustness ABI addition
exynos:
- Logging cleanups
tegra:
- Shared reset fix
- CPU cache maintenance fix
cirrus:
- driver rewritten using simple helpers
meson:
- G12A support
vmwgfx:
- Resource dirtying management improvements
- Userspace logging improvements
virtio:
- PRIME fixes
rockchip:
- rk3066 hdmi support
sun4i:
- DSI burst mode support
vc4:
- load tracker to detect underflow
v3d:
- v3d v4.2 support
malidp:
- initial Mali D71 support in komeda driver
tfp410:
- omap related improvement
omapdrm:
- drm bridge/panel support
- drop some omap specific panels
rcar-du:
- Display writeback support"
* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
drm/msm/a6xx: No zap shader is not an error
drm/cma-helper: Fix drm_gem_cma_free_object()
drm: Fix timestamp docs for variable refresh properties.
drm/komeda: Mark the local functions as static
drm/komeda: Fixed warning: Function parameter or member not described
drm/komeda: Expose bus_width to Komeda-CORE
drm/komeda: Add sysfs attribute: core_id and config_id
drm: add non-desktop quirk for Valve HMDs
drm/panfrost: Show stored feature registers
drm/panfrost: Don't scream about deferred probe
drm/panfrost: Disable PM on probe failure
drm/panfrost: Set DMA masks earlier
drm/panfrost: Add sanity checks to submit IOCTL
drm/etnaviv: initialize idle mask before querying the HW db
drm: introduce a capability flag for syncobj timeline support
drm: report consistent errors when checking syncobj capibility
drm/nouveau/nouveau: forward error generated while resuming objects tree
drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
drm/nouveau/i2c: Disable i2c bus access after ->fini()
drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
...
|
|
This patch does more harm than good, as it breaks both Xwayland and
gnome-shell with X11.
Xwayland requires DRI3 & DRI3 requires PRIME.
X11 crash for obscure double-free reason which are hard to debug
(starting X11 by hand doesn't trigger the crash).
I don't see an apparent problem implementing those stub prime
functions, they may return an error at run-time, and it seems to be
handled fine by GNOME at least.
This reverts commit b318e3ff7ca065d6b107e424c85a63d7a6798a69.
[airlied:
This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2.
This brings back the original problem, but it's better than regressions.]
Fixes: b318e3ff7ca065d6b107e424c85a63d7a6798a ("drm/virtio: drop prime import/export callbacks")
Signed-off-by: Marc-André Lureau <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Just run drm_prime_pages_to_sg() on the ttm pages list to get an
sg_table for export. The pages list is created at object initialization
time, so there should be no need to handle an unpopulated page list.
Add a sanity check nevertheless.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
virtio-gpu objects never move around, so effectively they are
pinned all the time. Therefore we don't need the (optional)
pin/unpin callbacks. Remove them.
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <[email protected]>
|
|
Also set prime_handle_to_fd and prime_fd_to_handle to NULL,
so drm will not advertive DRM_PRIME_CAP_{IMPORT,EXPORT} to
userspace.
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the code around so the driver is probed the bus
.probe and removed from the bus .remove callbacks.
This commit is just a cleanup and shouldn't affect
functionality.
Signed-off-by: Ezequiel Garcia <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
linux guest driver implementation of the VIRTIO_GPU_F_EDID feature.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This patch fixes the checkpatch.pl check:
virtgpu_drv.c:116: CHECK: Please don't use multiple blank lines
virtgpu_vq.c:599: CHECK: Please don't use multiple blank lines
virtgpu_prime.c:42: CHECK: Please don't use multiple blank lines
Signed-off-by: Rodrigo Siqueira <[email protected]>
Reviewed-by: Gurchetan Singh <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/c43a006f2ed93a16fe824b4a2686a2d5e2ef56f5.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This patch fixes the checkpatch.pl warnings:
virtgpu_drv.c:57: WARNING: Missing a blank line after declarations
virtgpu_display.c:99: WARNING: Missing a blank line after declarations
...
Signed-off-by: Rodrigo Siqueira <[email protected]>
Reviewed-by: Gurchetan Singh <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/41767852ff9dc584c825e32db6222b9a311603b9.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy()
which is the drm_driver.dumb_destroy default, so no need to set it.
Cc: David Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Noralf Trønnes <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm/virtio: fix busid in a different way, allocate more vbufs.
drm/qxl: various bugfixes and cleanups,
* tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits)
drm/virtio: allocate some extra bufs
qxl: Allow resolution which are not multiple of 8
qxl: Don't notify userspace when monitors config is unchanged
qxl: Remove qxl_bo_init() return value
qxl: Call qxl_gem_{init, fini}
qxl: Add missing '\n' to qxl_io_log() call
qxl: Remove unused prototype
qxl: Mark some internal functions as static
Revert "drm: virtio: reinstate drm_virtio_set_busid()"
drm/virtio: fix busid regression
drm: re-export drm_dev_set_unique
Linux 4.9-rc5
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
iio: maxim_thermocouple: detect invalid storage size in read()
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
...
|
|
This reverts commit c2cbc38b9715bd8318062e600668fc30e5a3fbfa.
Commit "drm/virtio: fix busid regression" is a better fix.
|
|
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to
check for the config everywhere.
Reviewed-by: Patrik Jakobsson <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Before commit a325725633c2 ("drm: Lobotomize set_busid nonsense for !pci
drivers"), several DRM drivers for platform devices used to expose an
explicit "drm_driver.set_busid" callback, invariably backed by
drm_platform_set_busid().
Commit a325725633c2 removed drm_platform_set_busid(), along with the
referring .set_busid field initializations. This was justified because
interchangeable functionality had been implemented in drm_dev_alloc() /
drm_dev_init(), which DRM_IOCTL_SET_VERSION would rely on going forward.
However, commit a325725633c2 also removed drm_virtio_set_busid(), for
which the same consolidation was not appropriate: this .set_busid callback
had been implemented with drm_pci_set_busid(), and not
drm_platform_set_busid(). The error regressed Xorg/xserver on QEMU's
"virtio-vga" card; the drmGetBusid() function from libdrm would no longer
return stable PCI identifiers like "pci:0000:00:02.0", but rather unstable
platform ones like "virtio0".
Reinstate drm_virtio_set_busid() with judicious use of
git checkout -p a325725633c2^ -- drivers/gpu/drm/virtio
Cc: Daniel Vetter <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Gustavo Padovan <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: Joachim Frieben <[email protected]>
Cc: [email protected] # v4.8
Reported-by: Joachim Frieben <[email protected]>
Fixes: a325725633c26aa66ab940f762a6b0778edf76c0
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1366842
Signed-off-by: Laszlo Ersek <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
We already have a fallback in place to fill out the unique from
dev->unique, which is set to something reasonable in drm_dev_alloc.
Which means we only need to have a special set_busid for pci devices,
to be able to care the backwards compat code for drm 1.1 around, which
libdrm still needs.
While developing and testing this patch things blew up in really
interesting ways, and the code is rather confusing in naming things
between the kernel code, ioctl #defines and libdrm. For the next brave
dragon slayer, document all this madness properly in the userspace
interface section of gpu.tmpl.
v2: Make drm_dev_set_unique static and update kerneldoc.
v3: Entire rewrite, plus document what's going on for posterity in the
gpu docbook uapi section.
v4: Drop accidental amdgpu hunk (Emil).
v5: Drop accidental omapdrm vblank counter change (Emil).
v6: Rebase on top of the sphinx conversion.
Cc: Gustavo Padovan <[email protected]>
Cc: Emil Velikov <[email protected]>
Tested-by: Gustavo Padovan <[email protected]> (virt_gpu)
Reviewed-by: Emil Velikov <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
No dev->struct_mutex anywhere to be seen.
Cc: Gerd Hoffmann <[email protected]>
Cc: David Airlie <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset
drivers.
v2: Make the dummy function actually return a sane value, spotted by
Ville.
v3: Because the patch is still in limbo there's no more drivers to
convert, noticed by Emil.
v4: Rebase once more, because hooray. I'll just go ahead an apply this
one later on to drm-misc.
Cc: Emil Velikov <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Advertise atomic mode setting capability to user space.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Also add DRM_RENDER_ALLOW to the ioctls.
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This is enough to enable DRI3.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
Add the bits needed for opengl rendering support: query
capabilities, new virtio commands, drm ioctls.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This patch adds a kms driver for the virtio gpu. The xorg modesetting
driver can handle the device just fine, the framebuffer for fbcon is
there too.
Qemu patches for the host side are under review currently.
The pci version of the device comes in two variants: with and without
vga compatibility. The former has a extra memory bar for the vga
framebuffer, the later is a pure virtio device. The only concern for
this driver is that in the virtio-vga case we have to kick out the
firmware framebuffer.
Initial revision has only 2d support, 3d (virgl) support requires
some more work on the qemu side and will be added later.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
|