| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If udl_get_urb() fails then this should return a negative error code
but currently it returns success.
Fixes: 798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda
|
|
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Christian König <[email protected]>
Tested-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.
v3:
* upcast dev with udl_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <[email protected]>
Cc: kernel test robot <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: [email protected]
Cc: Harry Wentland <[email protected]>
Cc: Leo Li <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The udl driver contains an implementation of GEM vmap and mmap
operations that is identical to the common SHMEM helper; except
that udl's code uses cached pages by default.
Convert udl to regular SHMEM helper functions. There's no reason
to have udl behave differently from all other SHMEM drivers. The
udl driver uses the SHMEM helper to enable caching.
v3:
* rebased onto Daniel's shmem untangle series
v2:
* implement .gem_create_object with SHMEM helper
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's no direct harm, because for the shmem helpers these are noops
on imported buffers. The trouble is in the locks these take - I want
to change dma_buf_vmap locking, and so need to make sure that we only
ever take certain locks on one side of the dma-buf interface: Either
for exporters, or for importers.
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following sparse warning:
drivers/gpu/drm/udl/udl_modeset.c:269:5: warning: symbol 'udl_handle_damage'
was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We're mostly there already, just a handful of places that didn't use
the to_udl container_of cast. To make sure no new appear, don't set
->dev_private.
Reviewed-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Alexios Zavras <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "José Roberto de Souza" <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Allison Randal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With Thomas' patch to clean up fbdev init this is a rather standard
conversion to the new wrapper macro.
v2: Rebase on top of Thomas' patches to remove the return value from
drm_fbdev_generic_setup()
v3: Update commit message to reflect the reality of the rebased patch
(Sam)
Reviewed-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove the error check from the fbdev setup function. The driver's
probe function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's only two functions called from that:
drm_kms_helper_poll_fini() and udl_free_urb_list(). Both of these are
also called from the ubs_driver->disconnect hook, so entirely
pointless to do the same again in the ->release hook.
Furthermore by the time we clean up the drm_driver we really shouldn't
be touching hardware anymore, so stopping the poll worker and freeing
the urb allocations in ->disconnect is the right thing to do.
Now disconnect still cleans things up before unregistering the driver,
but that's a different issue.
v2: Use _fini, not _disable in unplug, motivated by discussions with
Thomas. _disable/_enable are for suspend/resume.
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It's right above the drm_dev_put().
This allows us to delete a bit of onion unwinding in
udl_modeset_init().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Thomas Zimmermann <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It has become empty. Given the few users I figured not much point
splitting this up.
v2: Rebase over i915 changes.
v3: Rebase over patch split fix.
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With this we can drop the final kfree from the release function.
v2: We need drm_dev_put to unroll the driver creation (once
drm_dev_init and drmm_add_final_kfree suceeded), otherwise
the drmm_ magic doesn't happen.
v3: Actually squash in the fixup (Laurent).
Acked-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and
the set function, drm_helper_connector_dpms(), wouldn't support it
anyway. So keep the pointer to NULL.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As udl does not initialize vblanking, atomic helpers initialize the
value of struct drm_crtc_state.no_vblank to be true. No need to set
it from within the driver.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.
This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The remaining code in udl_fb.c is unused. Remove the file entirely.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The only caller of udl_handle_damage() in the plane-update function
in udl_modeset.c. Move udl_handle_damage() there.
v2:
* remove udl_fb.c in a separate patch
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The udl driver stores the currently active framebuffer to know from
where to accept damage updates.
With the conversion to plane-state damage handling, this is not necessary
any longer. The currently active framebuffer and damaged area are always
stored in the plane state.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The infrastruture for atomic modesetting allows us to use the generic
code for dirty-FB and damage handling. Switch over udl and remove the
driver's implementation. The simple-pipe's update function now picks up
the primary plane's damage and updates a minimal region of the screen.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The current default color depth of 24 bpp is not even supported by
the driver. Being the native format for communicating with the adapter,
16 bpp is the correct choice.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DPMS functionality is only used by the CRTC's enable and disable
functions. Inline the code. The patch also adds symbolic constants
for the blank register and constants; according to udlfb, which is
a bit more detailed than DRM's udl.
v3:
* use symbolic constants for blank, according to udlfb driver
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We can use the generic suspend/resume helpers for atomic modesetting.
Switch udl over.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Udl has a single display pipeline with a primary plane; perfect for
simple-pipe helpers. Convert it over. The old encoder and CRTC code
becomes unused and obsolete.
Exported formats for the primary plane are RGB565 and XRGB8888, with
the latter being emulated. The 16-bit format is the default and what
is used when communicating with the device.
This patch enables atomic modesetting for udl devices.
v3:
* remove unused field crtc from struct udl_device
* set crtc_state->no_vblank at beginning of enable()
v2:
* move suspend/resume changes into separate patch
* remove non-atomic code
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
To mimic simple-pipe, we initialize the connector before the rest of
the display pipeline.
v2:
* remove unnecessary calls to drm_connector_{register,unregister}()
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The field lost_pixels in struct udl_device was supposed to signal an
error during USB transfers of the framebuffer data. The driver would
have to schedule a re-transfer at a later point. This code was never
implemented. Remove lost_pixels and return regular error codes instead.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The damage-handler code now invokes dma_buf_{begin,end}_access()
for imported buffers. These calls were missing from the page-flip
and modesetting code paths. The patch also fixes an bug in the
original where an error code was overwritten by the result of
dma_buf_end_cpu_access().
v2:
* only return an error code from dma_buf_end_cpu_access() if
no other error code has been set before
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Computing the cpp value's logarithm in a separate helper function makes
the damage-handler code more readable.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Computing the clip rectable in a separate helper function makes the
damage-handler code more readable.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We now do the fast tests before the potentially expensive vmap operation.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A call to udl_render_hline() returns the number of identical and
sent pixels. None of these values is used. Remove the parameters.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
None of the udl driver's statistics counters is used anywhere. Remove
them.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The udl driver's struct udl_framebuffer stores a DRM framebuffer
with an associated GEM object. This functionality is also provided by
generic code. Switch udl over.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Simplifying the udl code before replacing struct udl_framebuffer.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The framebuffer's 'active_16' flag signals which framebuffer to flush
to device memory. Moving the 'active_16' state from struct udl_framebuffer
into struct udl_device prepares for using the generic GEM framebuffer.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Udl's custom implementation for struct drm_gem_object_funcs.free_object
unmaps perma-mapped memory buffer before freeing the buffer object.
After switching to generic fbdev emulation and fixing the damage
handler, no perma-mapped buffers have to be released. Switch to SHMEM's
implementation of free_object.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Udl keeps a BO mapped for its entire lifetime if it has been used in a
damage update at least once. The BO's free callback release the mapping
before it frees the BO.
Change this behaviour to unmap immediately after the damage update, so
SHMEM's implementation of free can be used.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The udl driver can use the generic fbdev implementation. Convert it.
v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Simply removes all the obsolete GEM code from udl. No functional
changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Udl's GEM code and the generic SHMEM are almost identical. Replace
the former with SHMEM. The dmabuf support in udl is being replaced
with generic GEM PRIME functions.
The main difference is in the caching flags for mmap pages. By
default, SHMEM always sets (uncached) write combining. In udl's
memory management code, only imported buffers use write combining.
Memory pages of locally created buffer objects are mmap'ed with
caching enabled. To keep the optimization, udl provides its own
mmap function for GEM objects where it fixes up the mapping flags.
v3:
- restore udl vmap that enables caching
v2:
- remove obsolete code in a separate patch
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In preparation of a switch to SHMEM, udl now allocates its GEM
objects via struct drm_driver.gem_create_object. No functional
changes are made.
For SHMEM GEM objects, udl will require the use of a special mmap
function, which we set though the create-object function.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The flags field in struct udl_gem controls mapping parameters: cached
access for local buffers, write-combined access for imported buffers.
We can drop the field and distinguish both cases by testing whether
struct drm_gem_object.import_attach is NULL.
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
encoder
This 3 non-atomic drivers all have the same function getting the
only encoder available in the connector, also atomic drivers have
this fallback. So moving it a common place and sharing between atomic
and non-atomic drivers.
While at it I also removed the mention of
drm_atomic_helper_best_encoder() that was renamed in
commit 297e30b5d9b6 ("drm/atomic-helper: Unexport
drm_atomic_helper_best_encoder").
v3: moving drm_connector_get_single_encoder to drm_kms_helper module
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Suggested-by: Ville Syrjälä <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: José Roberto de Souza <[email protected]>
Signed-off-by: Manasi Navare <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The drmP.h header file is deprecated.
Drop it from all files in the udl driver.
Made the header files self contained, which then
made it simpler to update the .c files.
Signed-off-by: Sam Ravnborg <[email protected]>
Acked-by: Emil Velikov <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Robert Tarasov <[email protected]>
Cc: Oleksandr Andrushchenko <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: Emil Lundmark <[email protected]>
Cc: Eugeniy Paltsev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The idea is that gem_prime_export is deprecated in favor of
obj_funcs.export. That's much easier to do if both have matching
function signatures.
Reviewed-by: Eric Anholt <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Christian König <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Russell King <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Zhi Wang <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: "David (ChunMing) Zhou" <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: "Michel Dänzer" <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Huang Rui <[email protected]>
Cc: Felix Kuehling <[email protected]>
Cc: Hawking Zhang <[email protected]>
Cc: Feifei Xu <[email protected]>
Cc: Jim Qu <[email protected]>
Cc: Evan Quan <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: Jilayne Lovejoy <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Junwei Zhang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Split out to make the functional changes stick out more.
All places where DRIVER_PRIME was used have been removed in previous
patches already.
v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE.
v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE.
v4: Don't add a space in i915_drv.c (Sam)
v5: Add note that previous patches removed all the DRIVER_PRIME users
already (Emil).
v6: Fixupe ingenic (new driver) while applying.
Cc: Sam Ravnborg <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: NXP Linux Team <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: VMware Graphics <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Based on 1 normalized pattern(s):
this file is subject to the terms and conditions of the gnu general
public license v2 see the file copying in the main directory of this
archive for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Jilayne Lovejoy <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|