aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-02drm/tilcdc: Remove obsolete crtc_mode_valid() hackJyri Sarha1-17/+11
Earlier there were no mode_valid() helper for crtc and tilcdc had a hack to over come this limitation. But now the mode_valid() helper is there (has been since v4.13), so it is about time to get rid of that hack. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <5c4dcb5b1e7975bd2b7ca86f7addf219cd0f9a06.1564750248.git.jsarha@ti.com
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard1-12/+1
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-17drm/tilcdc: drop use of drmP.hSam Ravnborg1-7/+11
Dropped drmP.h and all other header files not used by tilcdc_drv.h. Added the minimal includes and forwards to make the header file self-contained. Then dropped the remaining uses of drmP.h and fixed all fall-out. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-15-sam@ravnborg.org
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09drm/tilcdc: Fix setting clock divider for omap-l138David Lechner1-1/+1
This fixes setting the clock divider on the TI OMAP-L138 LCDK board. The clock drivers for OMAP-L138 are being covernted to the common clock framework. When this happens, clk_set_rate() will no longer return an error. However, on this SoC, the clock rate cannot actually be changed because the clock has to maintain a fixed ratio to the ARM clock. So after attempting to set the clock rate, we need to check to see if the new rate is actually close enough. If not, then follow the previous error path to adjust the divider in LCDC IP block to compensate for not being able to change the parent clock rate. Tested working on a TI OMAP-L138 LCDK board. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2018-02-28drm/tilcdc: Delete an error message for a failed memory allocation in seven ↵Markus Elfring1-3/+1
functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-12-18drm/tilcdc: make tilcdc_mode_hvtotal() staticXiongwei Song1-1/+1
The function tilcdc_mode_hvtotal is local to the source and does not need to be in global scope, so make it static. drivers/gpu/drm/tilcdc/tilcdc_crtc.c:297:6: warning: no previous prototype for 'tilcdc_mode_hvtotal' [-Wmissing-prototypes] uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode) Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-12-18drm/tilcdc: Remove drm_framebuffer_get() and *_put() callsJyri Sarha1-49/+0
The drm_framebuffer_get() and drm_framebuffer_put() calls in the tilcdc driver are obsolete. The drm atomic modesetting core should take care of holding the references while the atomic state object is in use. The old state is deleted when a commit of a new one is completed after drm_atomic_helper_wait_for_vblanks(). This also fixes an occasional framebuffer leak the old drm_framebuffer_get() and drm_framebuffer_put() code had. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-10-13drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()Jyri Sarha1-1/+12
We need the total frame refresh time to check if we are too close to vertical sync when updating the two framebuffer DMA registers and risk a collision. This new method is more accurate that the previous that based on mode's vrefresh value, which itself is inaccurate or may not even be initialized. Reported-by: Kevin Hao <kexin.hao@windriver.com> Fixes: 11abbc9f39e0 ("drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-05drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy()Jyri Sarha1-3/+1
Use tilcdc_crtc_shutdown() instead of tilcdc_crtc_disable() in tilcdc_crtc_destroy() and remove the modeset locking. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-10-05drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checksJyri Sarha1-4/+0
Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks from tilcdc_crtc_enable(), tilcdc_crtc_disable(), and tilcdc_crtc_update_fb(). Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-10-05drm/tilcdc: Turn raster off in crtc reset, if it was on in the HWJyri Sarha1-1/+29
This forces the HW to be in sync with the empty state. This should help with the problem when LCDC is already enabled (e.g. by the bootloader) at the initialization phase and the enable fails when a new mode is applied. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-10-05drm/tilcdc: switch to drm_*{get,put} helpersCihangir Akturk1-3/+3
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() adn should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-07-26drm: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-30drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()Laurent Pinchart1-1/+7
The CRTC .disable() helper operation is deprecated for atomic drivers, the new .atomic_disable() helper operation being preferred. Convert all atomic drivers to .atomic_disable() to avoid cargo-cult use of .disable() in new drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart1-1/+7
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-04-06drm: convert drivers to use of_graph_get_remote_nodeRob Herring1-10/+2
Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Liviu Dudau <liviu.dudau@arm.com> Tested-by: Eric Anholt <eric@anholt.net> Tested-by: Jyri Sarha <jsarha@ti.com> Tested by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-03-25drm/tilcdc: Drop calls to modeset_lock_crtcDaniel Vetter1-6/+6
Again this is an internal helper, not the official way to lock a crtc. Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-9-daniel.vetter@ffwll.ch
2017-03-23BackMerge tag 'v4.11-rc3' into drm-nextDave Airlie1-13/+24
Linux 4.11-rc3 as requested by Daniel
2017-03-14drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabledJyri Sarha1-12/+23
Touching HW while clocks are off is a serious error and for instance breaks suspend functionality. After this patch tilcdc_crtc_update_fb() always updates the primary plane's framebuffer pointer, increases fb's reference count and stores vblank event. tilcdc_crtc_update_fb() only writes the fb's DMA address to HW if the crtc is enabled, as tilcdc_crtc_enable() takes care of writing the address on enable. This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of subsequent small changes had made it almost unreadable. There should be no other functional changes but checking the CRTC's enable state. However, the locking goes a bit differently and some of the redundant checks have been removed in this new version. The enable_lock should be enough to protect the access to tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank and next_fb. The check for vrefresh and last_vblank being valid is redundant, as the vrefresh should be always valid if the CRTC is enabled and now last_vblank should be too, because it is initialized to current time when CRTC raster is enabled. If for some reason the values are not correctly initialized the division by zero warning is quite appropriate. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-03-14drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()Jyri Sarha1-1/+1
Fix badly hardcoded return return value under fail-label. All goto branches to the label set the "ret"-variable accordingly. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
2017-02-09drm: tilcdc: use vblank hooks in struct drm_crtc_funcsShawn Guo1-0/+11
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. While at it, the 'return' of .disable_vblank is dropped to fix the following checkpatch warning. WARNING: void function return statements are not generally useful Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Jyri Sarha <jsarha@ti.com> Acked-by: Jyri Sarha <jsarha@ti.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-22-git-send-email-shawnguo@kernel.org
2017-01-27Merge branch 'master' of ↵Dave Airlie1-9/+18
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus master to get the connector locking revert. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits) sysctl: fix proc_doulongvec_ms_jiffies_minmax() Revert "drm/probe-helpers: Drop locking from poll_enable" MAINTAINERS: add Dan Streetman to zbud maintainers MAINTAINERS: add Dan Streetman to zswap maintainers mm: do not export ioremap_page_range symbol for external module mn10300: fix build error of missing fpu_save() romfs: use different way to generate fsid for BLOCK or MTD frv: add missing atomic64 operations mm, page_alloc: fix premature OOM when racing with cpuset mems update mm, page_alloc: move cpuset seqcount checking to slowpath mm, page_alloc: fix fast-path race with cpuset update or removal mm, page_alloc: fix check for NULL preferred_zone kernel/panic.c: add missing \n fbdev: color map copying bounds checking frv: add atomic64_add_unless() mm/mempolicy.c: do not put mempolicy before using its nodemask radix-tree: fix private list warnings Documentation/filesystems/proc.txt: add VmPin mm, memcg: do not retry precharge charges proc: add a schedule point in proc_pid_readdir() ...
2017-01-09Merge tag 'drm-misc-next-2016-12-30' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/git/drm-misc into drm-next First -misc pull for 4.11: - drm_mm rework + lots of selftests (Chris Wilson) - new connector_list locking+iterators - plenty of kerneldoc updates - format handling rework from Ville - atomic helper changes from Maarten for better plane corner-case handling in drivers, plus the i915 legacy cursor patch that needs this - bridge cleanup from Laurent - plus plenty of small stuff all over - also contains a merge of the 4.10 docs tree so that we could apply the dma-buf kerneldoc patches It's a lot more than usual, but due to the merge window blackout it also covers about 4 weeks, so all in line again on a per-week basis. The more annoying part with no pull request for 4 weeks is managing cross-tree work. The -intel pull request I'll follow up with does conflict quite a bit with -misc here. Longer-term (if drm-misc keeps growing) a drm-next-queued to accept pull request for the next merge window during this time might be useful. I'd also like to backmerge -rc2+this into drm-intel next week, we have quite a pile of patches waiting for the stuff in here. * tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits) drm: Add kerneldoc markup for new @scan parameters in drm_mm drm/mm: Document locking rules drm: Use drm_mm_insert_node_in_range_generic() for everyone drm: Apply range restriction after color adjustment when allocation drm: Wrap drm_mm_node.hole_follows drm: Apply tight eviction scanning to color_adjust drm: Simplify drm_mm scan-list manipulation drm: Optimise power-of-two alignments in drm_mm_scan_add_block() drm: Compute tight evictions for drm_mm_scan drm: Fix application of color vs range restriction when scanning drm_mm drm: Unconditionally do the range check in drm_mm_scan_add_block() drm: Rename prev_node to hole in drm_mm_scan_add_block() drm: Fix O= out-of-tree builds for selftests drm: Extract struct drm_mm_scan from struct drm_mm drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan() drm: Simplify drm_mm_clean() drm: Detect overflow in drm_mm_reserve_node() drm: Fix kerneldoc for drm_mm_scan_remove_block() drm: Promote drm_mm alignment to u64 drm: kselftest for drm_mm and restricted color eviction ...
2017-01-09Merge tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux into drm-fixesDave Airlie1-9/+18
tilcdc fixes for v4.10. * tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux: drm: tilcdc: simplify the recovery from sync lost error on rev1
2017-01-04drm: tilcdc: simplify the recovery from sync lost error on rev1Bartosz Golaszewski1-9/+18
Revision 2 of LCDC suffers from an issue where a SYNC_LOST error caused by limited memory bandwidth may leave the picture shifted a couple pixels to the right. This issue has not been observed on revision 1, while the recovery mechanism introduces a different issue, where the END_OF_FRAME interrupt doesn't fire while drm is waiting for vblanks. On rev1: recover from sync lost errors by simply clearing the RASTER_ENABLE bit in the RASTER_CTRL register and re-enabling it again as is suggested by the datasheet. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-1/+1
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-1/+1
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Replace drm_format_plane_cpp() with fb->format->cpp[]Ville Syrjälä1-1/+1
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com
2016-11-30drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1Jyri Sarha1-7/+11
We should wait for the last frame to complete before shutting things down also on LCDC rev 1. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Configure video mode to HW in enable() not in mode_set_nofb()Jyri Sarha1-214/+212
Configure video mode to HW in enable() call back. There is no reason to do it before that. This makes PM functions way easier because there is no HW context to save when screen is for instance blanked. This patch removes mode_set_nofb() call back from tilcdc. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Load palette at the end of mode_set_nofb()Jyri Sarha1-20/+5
Load palette at the end of mode_set_nofb(). Moving the palette loading to mode_set_nofb() saves us from storing and restoring of framebuffer addresses in dma registers that were just recently written there. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Add timeout wait for palette loading to completeJyri Sarha1-1/+5
Add timeout wait for palette loadind to complete. We do not want to hang forever if palette loaded interrupt does not arrive for some reason. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Enable palette loading for revision 2 LCDC tooJyri Sarha1-43/+47
The LCDC revision 2 documentation also mentions the mandatory palette for true color modes. Even if the rev 2 LCDC appears to work just fine without the palette being loaded loading it helps in testing the feature. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Fix load mode bit-field setting in tilcdc_crtc_enable()Jyri Sarha1-1/+3
Set LCDC_PALETTE_LOAD_MODE bit-field with new tilcdc_write_mask() instead of tilcdc_set(). Setting a bit-fields with tilcdc_set() is fundamentally broken. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Fix tilcdc_crtc_create() return value handlingJyri Sarha1-5/+7
Failed tilcdc_crtc_create() error handling was broken, this patch should fix it. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: implement palette loading for rev1Bartosz Golaszewski1-1/+87
Revision 1 of the IP doesn't work if we don't load the palette (even if it's not used, which is the case for the RGB565 format). Add a function called from tilcdc_crtc_enable() which performs all required actions if we're dealing with a rev1 chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDCJyri Sarha1-15/+20
Revision 1 LCDC support also sync lost errors and can benefit from sync lost recovery routine. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Recover from sync lost error flood by resetting the LCDCJyri Sarha1-1/+25
Recover from sync lost error flood by resetting the LCDC instead of turning off the SYNC_LOST error IRQ. When LCDC starves on limited memory bandwidth it may sometimes result an error situation when the picture may have shifted couple of pixels to right and SYNC_LOST interrupt is generated on every frame. LCDC main reset recovers from this situation and causes a brief blanking on the screen. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-29drm/tilcdc: Fix race from forced shutdown of crtc in unloadJyri Sarha1-6/+23
Fix race from forced shutdown of crtc in unload by adding internal locking and a boolean telling if device is going to be shutdown. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-11-29drm/tilcdc: Use unload to handle initialization failuresJyri Sarha1-3/+7
Use unload to handle initialization failures instead of complex goto label mess. To do this the initialization sequence needed slight reordering and some unload functions needed to become conditional. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-11-29drm/tilcdc: Correct misspelling in error messageDaniel Schultz1-1/+1
This error message will be printed when a FIFO underflow irq has triggered. Since this happens sometimes and the error message will be displayed on the console, it should have a correct spelling. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-11-29drm/tilcdc: Add revision handling for FB_CEILINGDaniel Schultz1-1/+5
The commit d8ff0c63fbcb ("drm/tilcdc: Adjust the FB_CEILING address") added an adjustment of the FB_CEILING address. This is done by decrementing the address by one. On the AM335x (rev 0x4F201000) the framebuffer is rotated left over the display border, because the ceiling address is 8f276fff instead of 8f277000. Since this adjustment isn't necessary for the LCDC v2, the origin ceiling address should be used. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-11-29drm/tilcdc: add a workaround for failed clk_set_rate()Bartosz Golaszewski1-6/+51
Some architectures don't use the common clock framework and don't implement all the clk interfaces for every clock. This is the case for da850-lcdk where clk_set_rate() only works for PLL0 and PLL1. Trying to set the clock rate for the LCDC clock results in -EINVAL being returned. As a workaround for that: if the call to clk_set_rate() fails, fall back to adjusting the clock divider instead. Proper divider value is calculated by dividing the current clock rate by the required pixel clock rate in HZ. This code is based on a hack initially developed internally for baylibre by Karl Beldan <kbeldan@baylibre.com>. Tested with a da850-lcdk with an LCD display connected over VGA. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-10-18drm: tilcdc: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()Laurent Pinchart1-10/+8
The driver needs the number of bytes per pixel, not the bpp and depth info meant for fbdev compatibility. Use the right API. In the tilcdc_crtc_mode_set() function compute the hardware register value directly from the pixel format instead of computing the number of bits per pixels first. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-7-git-send-email-laurent.pinchart@ideasonboard.com
2016-09-28Merge tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux into drm-nextDave Airlie1-32/+59
Second attempt for 3rd drm/tilcdc pull request for v4.9. * tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux: drm/tilcdc: fix wrong error handling drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node() drm/tilcdc: Remove "default" from blue-and-red-wiring property binding drm/tilcdc: Fix non static symbol warning drm/tilcdc: mark symbols static where possible drm/tilcdc: add missing header dependencies drm/tilcdc: WARN if CRTC is touched without CRTC lock drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable() drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload() drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup() drm/tilcdc: Clean up LCDC functional clock rate setting code drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
2016-09-21drm/tilcdc: Add atomic and crtc headers to crtc.cSean Paul1-2/+4
Also reorder alphabetically and fix up drm_flip_work header. Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-09-07drm/tilcdc: WARN if CRTC is touched without CRTC lockJyri Sarha1-0/+8
WARN if CRTC is touched without CRTC lock. The crtc functions should not be called simultaneously from multiple threads. Having the DRM CRTC lock should take care of that. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-07drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()Jyri Sarha1-0/+2
Take CRTC lock when calling tilcdc_crtc_disable() in tilcdc_crtc_destroy(). In theory there could still be some operation ongoing, which should finish before destroying the CRTC. However, the main reason for adding this is to be able to add WARNing in tilcdc_crtc_disable() if CRTC is not locked. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-07drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()Jyri Sarha1-0/+4
Flush flip-work workqueue before drm_flip_work_cleanup(). It causes a nasty warning if there is unfinished flip-work in the queue when drm_flip_work_cleanup() is called. The flush_workqueue() has to be called before drm_crtc_cleanup() for unref_worker() to be able to do its job. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Powered by cgit, Gruvboxed by Blaster4385.