aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sun4i
AgeCommit message (Collapse)AuthorFilesLines
2018-06-18Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE"Paul Kocialkowski1-25/+0
This reverts commit 2c17a4368aad2b88b68e4390c819e226cf320f70. The offending commit triggers a run-time fault when accessing the panel element of the sun4i_tcon structure when no such panel is attached. It was apparently assumed in said commit that a panel is always used with the TCON. Although it is often the case, this is not always true. For instance a bridge might be used instead of a panel. This issue was discovered using an A13-OLinuXino, that uses the TCON in RGB mode for a simple DAC-based VGA bridge. Cc: [email protected] Signed-off-by: Paul Kocialkowski <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-28drm/sun4i: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
Disabling CONFIG_PM produces a compile time warning when these functions are not referenced: drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1072:12: error: 'sun6i_dsi_runtime_suspend' defined but not used [-Werror=unused-function] static int sun6i_dsi_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1043:12: error: 'sun6i_dsi_runtime_resume' defined but not used [-Werror=unused-function] static int sun6i_dsi_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-04-30Merge tag 'drm-misc-next-2018-04-26' of ↵Dave Airlie10-6/+1623
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.18: UAPI Changes: - Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime) Core Changes: - Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville) - mode_valid return type fixes. (Luc) - Handle zpos normalization in the core. (Peter) Driver Changes: - Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan) - Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas) - Add support for MIPI DSI to sun4i. (Maxime) Signed-off-by: Dave Airlie <[email protected]> # gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST # gpg: using RSA key FE558C72A67013C3 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-04-25Revert "drm/sun4i: add lvds mode_valid function"Ondrej Jirman1-55/+0
The reverted commit broke LVDS output on TBS A711 Tablet. That tablet has simple-panel node that has fixed pixel clock-frequency that A83T SoC used in the tablet can't generate exactly. Requested rate is 52000000 and rounded_rate is calculated as 51857142. It's close enough for it to work in practice, but with strict check in the reverted commit, the mode is rejected needlessly in this case. DT allows to specify a range of values for simple-panel/clock-frequency, but driver doesn't respect that ATM. Given that TBS A711 is the single user of sun4i-lvds driver, let's revert that commit for now, until a better solution for the problem is found. Also see: https://patchwork.kernel.org/patch/9446385/ for relevant discussion (or search for "[RFC] drm/sun4i: rgb: Add 5% tolerance to dot clock frequency check"). Fixes: e4e4b7ad50cf ("drm/sun4i: add lvds mode_valid function") Reported-by: Ondrej Jirman <[email protected]> Signed-off-by: Ondrej Jirman <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-04-16drm/sun4i: Add support for plane alphaMaxime Ripard3-3/+18
Our backend supports a per-plane alpha property. Support it through our new helper. Acked-by: Maarten Lankhorst <[email protected]> Acked-by: Sean Paul <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Paul Kocialkowski <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/13e89f0d2f2b55752a22eb8c4f37f325246a3a9c.1523432341.git-series.maxime.ripard@bootlin.com
2018-04-11drm/sun4i: Tie the DSI controller in the TCONMaxime Ripard2-0/+119
The DSI controller needs a particular interface (CPU aka 8080) with some modifications from the TCON in order to run. Make sure the TCON is able to provide it when we are using the DSI output. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/129f5928113d2ca865bf5269047c2e4ba6fed5e6.1522835818.git-series.maxime.ripard@bootlin.com
2018-04-11drm/sun4i: Add Allwinner A31 MIPI-DSI controller supportMaxime Ripard5-0/+1476
Most of the Allwinner SoCs since the A31 share the same MIPI-DSI controller. While that controller is mostly undocumented, the code is out there and has been cleaned up in order to be integrated into DRM. However, there's still some dark areas that are a bit unclear about how the block exactly operates. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com
2018-04-11drm/sun4i: tcon: Add TRI finish interrupt for vblankMaxime Ripard2-3/+10
The "CPU" (or Intel 8080) interface uses a different interrupt called TRI_FINISH (most likely TRI being for trigger) to notify the end of frames, and hence the VBLANK period. And that interrupt to the possible VBLANK interrupts source. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/de6d6ad8959da77ea3a974a31a4c0c8391178748.1522835818.git-series.maxime.ripard@bootlin.com
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie7-47/+69
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-20drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not get the HDMI DDC clock, we still need to free some resources before returning. Fixes: 939d749ad664 ("drm/sun4i: hdmi: Add support for controller hardware variants") Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/5e0084af4ad57e9eea3bca5bd8e2e95970cd6714.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-20drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not allocate the HDMI encoder regmap, we still need to free some resources before returning. Fixes: 4b1c924b1fc1 ("drm/sun4i: hdmi: create a regmap for later use") Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/14c42391e1b562c7495bda6ad6fa1d24ec8dc052.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-19drm/sun4i: backend: Support YUV planesMaxime Ripard3-0/+119
Now that we have the guarantee that we will have only a single YUV plane, actually support them. The way it works is not really straightforward, since we first need to enable the YUV mode in the plane that we want to setup, and then we have a few registers to setup the YUV buffer and parameters. We also need to setup the color correction to actually have something displayed. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com
2018-03-19drm/sun4i: backend: Check that we only have a single YUV planeMaxime Ripard2-2/+48
Just like for the frontend, a single plane can use a YUV format. Make sure we have that constraint covered in our atomic_check. This is preliminary to the actual YUV support to make sure we don't end up in an impossible to support situation. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/2f8586493d9139b12efe7e94f65e9a149f818e0e.1519931807.git-series.maxime.ripard@bootlin.com
2018-03-19drm/sun4i: Add driver support for A80 display pipelineChen-Yu Tsai3-2/+18
This patch adds support for the compatible strings of the A80 display pipeline. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-19drm/sun4i: Add support for A80 TCONsChen-Yu Tsai2-0/+28
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline diagram from the user manual shows a third TCON, but it's missing an interrupt line, and its registers are not explained either. It's also not used in Allwinner's vendor BSP. The first TCON only has channel 0, for LCD panel output. The TCON hardware setup is peculiar in that the eDP reset must also be deasserted to allow access to the TCON. How the eDP module is wired in the SoC itself is never explained. The second TCON only has channel 1, and its output is connected to the HDMI encoder block. This patch adds a "needs_edp_reset" field to the tcon quirks structure, and adds quirks and compatible strings for the 2 documented TCONs. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-14drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGEGiulio Benetti1-0/+25
Handle both positive and negative dclk polarity, according to bus_flags, taking care of this: On A20 and similar SoCs, the only way to achieve Positive Edge (Rising Edge), is setting dclk clock phase to 2/3(240°). By default TCON works in Negative Edge(Falling Edge), this is why phase is set to 0 in that case. Unfortunately there's no way to logically invert dclk through IO_POL register. The only acceptable way to work, triple checked with scope, is using clock phase set to 0° for Negative Edge and set to 240° for Positive Edge. On A33 and similar SoCs there would be a 90° phase option, but it divides also dclk by 2. This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers for using A33 90° phase divided by 2 and consequently increase code complexity. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1520963677-124239-1-git-send-email-giulio.benetti@micronovasrl.com
2018-03-14drm/sun4i: add lvds mode_valid functionGiulio Benetti1-0/+55
mode_valid function is missing for lvds. Add it making it pointed by encoder helper functions. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1520940019-68977-1-git-send-email-giulio.benetti@micronovasrl.com
2018-03-14drm/sun4i: move rgb mode_valid from connector to encoderGiulio Benetti1-4/+4
mode_valid function must be connected to encoder. Otherwise it could get not be called by drm in the case there's a bridge connected to encoder instead of a panel. Move mode_valid function pointer to encoder helper functions, changing its prototype according to encoder helper function pointer. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1520941017-81177-1-git-send-email-giulio.benetti@micronovasrl.com
2018-03-12drm/sun4i: Fix an error handling path in 'sun4i_drv_bind()'Christophe JAILLET1-2/+1
Commit 070badfab767 ("drm/sun4i: call drm_vblank_init with correct number of crtcs") has moved some code without updating the error handling gotos accordingly. Branch to the correct label and remove a now unused lablel. Fixes: 070badfab767 ("drm/sun4i: call drm_vblank_init with correct number of crtcs") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-12drm/sun4i: Fix exclusivity of the TCON clocksOndrej Jirman1-2/+3
Currently the exclusivity is enabled when the rate is set by the mode setting functions. These functions are called by mode_set_nofb callback of drm_crc_helper. Then exclusivity is disabled when tcon is disabled by atomic_disable callback. What happens is that mode_set_nofb can be called once when mode changes, and afterwards the system can call atomic_enable and atomic_disable multiple times without further calls to mode_set_nofb. This happens: mode_set_nofb - clk exclusivity is enabled atomic_enable atomic_disable - clk exclusivity is disabled atomic_enable atomic_disable - clk exclusivity is already disabled, leading to WARN in clk_rate_exclusive_put Solution is to enable exclusivity in sun4i_tcon_channel_set_status. Signed-off-by: Ondrej Jirman <[email protected]> Cc: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-06drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_offMaxime Ripard1-0/+4
Make sure that the CRTC code will call the enable/disable_vblank hooks. Otherwise, since the refcounting will be off, we might end up in a situation where the vblank management functions are called while the CRTC is off. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-06drm/sun4i: rgb: Fix potential division by zeroMaxime Ripard1-0/+2
In the case where mode_valid callback of our RGB connector was called before mode_set was being called, the range of dividers would not be set, resulting in a division by zero later on in the clk_round_rate logic. Set the range of dividers before calling clk_round_rate to fix this. Reviewed-by: Chen-Yu Tsai <[email protected]> Tested-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-06drm/sun4i: tcon: Reduce the scope of the LVDS error a bitMaxime Ripard2-41/+46
The current logic to deal with old DT missing the LVDS properties doesn't take into account whether the LVDS output is supported in the first place, resulting in spurious error messages on SoCs where it doesn't even matter. Introduce a new TCON flag to list if LVDS is supported at all to prevent this from happening. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-05drm: Don't pass clip to drm_atomic_helper_check_plane_state()Ville Syrjälä2-12/+2
Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Mali DP Maintainers <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Gustavo Padovan <[email protected]> Cc: Sean Paul <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: CK Hu <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Rob Clark <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Sandy Huang <[email protected]> Cc: "Heiko Stübner" <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thierry Reding <[email protected]> Cc: VMware Graphics <[email protected]> Cc: Sinclair Yeh <[email protected]> Cc: Thomas Hellstrom <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Archit Taneja <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Russell King <[email protected]> Suggested-by: Daniel Vetter <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Thierry Reding <[email protected]> Reviewed-by: Archit Taneja <[email protected]> #msm Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Liviu Dudau <[email protected]> #hdlcd,malidp Acked-by: Philipp Zabel <[email protected]> #imx,mtk Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]> #vmwgfx Acked-by: Neil Armstrong <[email protected]> #meson Acked-by: Shawn Guo <[email protected]> #zte
2018-03-02drm/sun4i: Allow building on arm64Jernej Skrabec1-1/+1
64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which is compatible to 32-bit SoCs, so allow building DRM driver for arm64 architecture. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Add support for H3 HDMI PHY variantJernej Skrabec4-3/+400
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3 HDMI PHY is completely custom PHY. However, they still have many things in common like clock and reset setup, setting sync polarity and more. Add support for H3 HDMI PHY variant. While documentation exists for this PHY variant, it doesn't go in great details. Because of that, almost all settings are copied from BSP linux 4.4. Interestingly, those settings are slightly different to those found in a older BSP with Linux 3.4. For now, no user visible difference was found between them. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Move and expand DW HDMI PHY register macrosJernej Skrabec2-17/+131
DW HDMI PHY macros are moved to header file and expanded with the registers present on newer SoCs like H3 and H5. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Add support for variants to DW HDMI PHYJernej Skrabec2-33/+76
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While some things like clock and reset setup are the same, PHY configuration differs a lot. Split out code which is PHY specific to separate functions and create a structure which holds pointers to those functions. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Fix polarity configuration for DW HDMI PHYJernej Skrabec1-7/+8
Current polarity configuration code is cleary wrong since it compares same flag two times. However, even if flag name is fixed, it won't work well for resolutions which have one polarity positive and another negative. Fix that by properly set each bit according to each polarity. Since those two bits are not described in any documentation, relationships were obtained by experimentation. Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver") Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Add support for H3 mixer 0Jernej Skrabec1-0/+12
This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Add support for H3 display engineJernej Skrabec1-0/+1
H3 display engine has two mixers which are connected to HDMI and TV output. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-02drm/sun4i: Release exclusive clock lock when disabling TCONJernej Skrabec1-2/+4
Currently exclusive TCON clock lock is never released, which, for example, prevents changing resolution on HDMI. In order to fix that, release clock when disabling TCON. TCON is always disabled first before new mode is set. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-01drm/sun4i: Fix dclk_set_phaseGiulio Benetti1-1/+4
Phase value is not shifted before writing. Shift left of 28 bits to fit right bits Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1519836413-35023-1-git-send-email-giulio.benetti@micronovasrl.com
2018-02-26drm/sun4i: Protect the TCON pixel clocksMaxime Ripard1-2/+2
Both TCON clocks are very sensitive to clock changes, since any change might lead to improper timings. Make sure our rate is never changed. Tested-by: Giulio Benetti <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/d5224d2e81ecf73dc09f234e580ada52c00eaee3.1519204731.git-series.maxime.ripard@bootlin.com
2018-02-26drm/sun4i: Enable the output on the pins (tcon0)Ondrej Jirman1-0/+3
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't work (there's output but it's garbled). I compared some older patches for LVDS support with the mainlined ones and this change is missing from mainline Linux. I don't know what the register does exactly and the harcoded register value doesn't inspire much confidence that it will work in a general case, so I'm sending this RFC. This patch fixes the issue on A83T. Signed-off-by: Ondrej Jirman <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-22drm/sun4i: backend: Remove ARGB spoofingMaxime Ripard1-9/+3
We've had some code for quite some time to prevent the alpha bug from happening on the lowest primary plane. Since we now check for this in our atomic_check, we can simply remove it. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/965180afd8169ccaa848f061d16a2c1a9ec4d289.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: backend: Make zpos configurableMaxime Ripard1-2/+3
Now that we have everything in place, we can make zpos configurable now. Change the zpos property from an immutable one to a regular. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/0ab187956855db86972d936e6751181649e0d035.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: Remove the plane description structureMaxime Ripard1-36/+8
The plane description structure was mostly needed to differentiate the formats usable on the primary plane (because of its lowest position), and assign the pipes. Now that both are dynamically checked and assigned, we can remove the static definition. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/6b09e3698e692c3338f70a5ae1e5a580f9dd08ee.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: backend: Assign the pipes automaticallyMaxime Ripard3-8/+39
Since we now have a way to enforce the zpos, check for the number of alpha planes, the only missing part is to assign our pipe automatically instead of hardcoding it. The algorithm is quite simple, but requires two iterations over the list of planes. In the first one (which is the same one that we've had to check for alpha, the frontend usage, and so on), we order the planes by their zpos. We can then do a second iteration over that array by ascending zpos starting with the pipe 0. When and if we encounter our alpha plane, we put it and all the other subsequent planes in the second pipe. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/e9caf21d831438d36a3ccc7cef229c9a7ea7f69f.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-16Merge airlied/drm-next into drm-misc-nextSean Paul2-4/+7
Backmerge 4.15 and hdcp topic branch Signed-off-by: Sean Paul <[email protected]>
2018-02-16drm/sun4i: fix HSYNC and VSYNC polarityGiulio Benetti1-2/+2
Differently from other Lcd signals, HSYNC and VSYNC signals result inverted if their bits are cleared to 0. Invert their settings of IO_POL register. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1518717288-123578-1-git-send-email-giulio.benetti@micronovasrl.com
2018-02-16drm/sun4i: Implement A83T HDMI driverJernej Skrabec5-0/+523
A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2 HDMI PHY. Only video output was tested, while HW also supports audio and CEC. Support for them will be added later. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-16drm/sun4i: Add support for A83T second DE2 mixerJernej Skrabec1-0/+11
It supports 1 VI and 1 UI plane and HW scaling on both planes. Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-16drm/sun4i: Add support for A83T second TCONJernej Skrabec1-0/+5
This TCON is connected to HDMI encoder. Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-16drm/sun4i: Add has_channel_0 TCON quirkJernej Skrabec2-12/+30
Some TCONs on newer SoCs doesn't support channel 0, since they are meant to be used only with TV or HDMI encoder. Prepare support for them with adding has_channel_0 quirk. Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-16Merge tag 'drm-misc-next-2018-02-13' of ↵Dave Airlie15-57/+1013
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.17: UAPI Changes: - drm/vc4: Expose performance counters to userspace (Boris) Cross-subsystem Changes: - MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus) Core Changes: - Only use swiotlb when necessary (Chunming) Driver Changes: - drm/panel: Add support for ARM Versatile panels (Linus) - pl111: Improvements around versatile panel support (Linus) ---------------------------------------- Tagged on 2018-02-06: drm-misc-next for 4.17: UAPI Changes: - Validate mode flags + type (Ville) - Deprecate unused mode flags PIXMUX, BCAST (Ville) - Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville) Cross-subsystem Changes: - MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel) Core Changes: - gem: Export gem functions for drivers to use (Samuel) - bridge: Introduce bridge timings in drm_bridge (Linus) - dma-buf: Allow exclusive fence to be bundled in fence array when calling reservation_object_get_fences_rcu (Christian) - dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi) - fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime) - mode: Various cleanups + add new device-wide .mode_valid hook (Ville) - atomic: Fix state leak when non-blocking commits fail (Leo) NOTE: IIRC, this was cross-picked to -fixes so it might fall out - crc: Allow polling on the data fd (Maarten) Driver Changes: - bridge/vga-dac: Add THS8134* support (Linus) - tinydrm: Various MIPI DBI improvements/cleanups (Noralf) - bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian) - drm/sun4i: Add Display Engine frontend support (Maxime) - drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime) - various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville) - stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe) Cc: Boris Brezillon <[email protected]> Cc: Chunming Zhou <[email protected]> Cc: Samuel Li <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Noralf Trønnes <[email protected]> Cc: Brian Norris <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Ville Syrjala <[email protected]> Cc: Christian König <[email protected]> Cc: Manasi Navare <[email protected]> Cc: Philippe Cornu <[email protected]> Cc: Leo (Sunpeng) Li <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Maarten Lankhorst <[email protected]> * tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits) drm/radeon: only enable swiotlb path when need v2 drm/amdgpu: only enable swiotlb alloc when need v2 drm: add func to get max iomem address v2 drm/vc4: Expose performance counters to userspace drm: Print the pid when debug logging an ioctl error. drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw drm/stm: ltdc: add non-alpha color formats drm/bridge/synopsys: dsi: Add 1.31 version support drm/bridge/synopsys: dsi: Add read feature drm/pl111: Support multiple endpoints on the CLCD drm/pl111: Support variants with broken VBLANK drm/pl111: Support variants with broken clock divider drm/pl111: Handle the Versatile RGB/BGR565 mode drm/pl111: Properly detect the ARM PL110 variants drm/panel: Add support for ARM Versatile panels drm/panel: Device tree bindings for ARM Versatile panels drm/bridge: Rename argument from crtc to bridge drm/crc: Add support for polling on the data fd. drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle ...
2018-02-02drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangleVille Syrjälä2-10/+8
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle. Note that this replaces crtc_state->adjusted_mode usage with crtc_state->mode. The latter is the correct choice since that's the mode the user provided and it matches the plane crtc coordinates the user also provided. Once everyone agrees on this we can move the clip handling into drm_atomic_helper_check_plane_state(). Cc: Maxime Ripard <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maxime Ripard <[email protected]> #irc
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds24-470/+3105
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2018-01-29drm/sun4i: backend: Check for the number of alpha planesMaxime Ripard3-22/+55
Due to the way the composition is done in hardware, we can only have a single alpha-enabled plane active at a time, placed in the second (highest priority) pipe. Make sure of that in our atomic_check to not end up in an impossible scenario. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7371f62a1385f2cbe3ed75dfca2e746338eb2286.1516617243.git-series.maxime.ripard@free-electrons.com
2018-01-29drm/sun4i: backend: Add support for zposMaxime Ripard4-0/+24
Our various planes have a configurable zpos, that combined with the pipes allow to configure the composition. Since the interaction between the pipes, zpos and alphas framebuffers is not trivial, let's just enable the zpos as an immutable property for now, and use that zpos in our atomic_update part. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b006853e908bd06661c5bc1f2191121523bce0e4.1516617243.git-series.maxime.ripard@free-electrons.com
Powered by cgit, Gruvboxed by Blaster4385.