| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The field contains a pointer to the parent platform device of the DRM
device. As struct drm_device also contains a dev pointer to the struct
device embedded in the platform_device structure, the platformdev field
is redundant. Remove it and use the dev pointer directly.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Acked-by: Jyri Sarha <[email protected]>
Acked-by: Vincent Abriou <[email protected]> # For sti
Acked-by: Russell King <[email protected]> # For armada
Acked-by: Rob Clark <[email protected]> # For msm
Acked-by: Xinwei Kong<[email protected]>
|
|
Reset the fps debug information when 'fps_show' is updated.
Signed-off-by: Fabien Dessenne <[email protected]>
|
|
Remove the hdmi_mode_property and use drm_detect_hdmi_monitor function
to check whether the connected monitor is HDMI capable or DVI only.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Unbind all the components when the STI driver is unregistered.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Do not process update requests with unmodified parameters.
This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Fix a division by 0 case : in some cases, when the GDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not set parent and pixel clock rate.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Set gdp pix clock rate and parent in atomic_check function and enable
it in the atomic_update only the first time.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep vtg slave field since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
stih416 chip family is no more supported in Linux v4.9.
Then sink_term config becomes useless. The field of the
register it was referring to is tag as reserved for stih410
chip family.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Fix a division by 0 case : in some cases, when the HQVDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not check for scaling capabilities.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Use drm-core to handle event.
This is required to be able to use the nonblocking helpers.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Since nonblocking atomic commits are now supported, the driver can
now use drm_atomic_helper_commit().
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Core code already makes drm_driver.get_vblank_counter hook optional by
letting drm_vblank_no_hw_counter be the default implementation for the
function hook. So the drm_vblank_no_hw_counter assignment in the driver
code becomes redundant and can be removed now.
Signed-off-by: Shawn Guo <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Mali DP Maintainers <[email protected]>
Cc: Russell King <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Xinliang Liu <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: CK Hu <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Eric Anholt <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Boris Brezillon <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Russell King <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Alexey Brodkin <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual
Noralf needs this for his tinydrm pull request.
* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
drm/vc4: Remove vc4_debugfs_cleanup()
dma/fence: Export enable-signaling tracepoint for emission by drivers
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm/tegra: Remove tegra_debugfs_cleanup()
drm/sti: Remove drm_debugfs_remove_files() calls
drm/radeon: Remove drm_debugfs_remove_files() call
drm/omap: Remove omap_debugfs_cleanup()
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm/etnaviv: allow build with COMPILE_TEST
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm/prime: Clarify DMA-BUF/GEM Object lifetime
drm/ttm: Make sure BOs being swapped out are cacheable
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm: drm_minor_register(): Clean up debugfs on failure
drm: debugfs: Remove all files automatically on cleanup
drm/fourcc: add vivante tiled layout format modifiers
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
drm/edid: Set AVI infoframe Q even when QS=0
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
...
|
|
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call
drm_debugfs_remove_files(). Additionally it uses
debugfs_remove_recursive() to clean up the debugfs files, so no need
for adding fake drm_info_node entries.
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Tested-by: Vincent Abriou <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?
I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a5497c ("drm: Nuke fb->pixel_format").
Fixes: 438b74a5497c ("drm: Nuke fb->pixel_format")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
drm-next
stih410 cleanup, create fbdev at binding, HQVDP fixes.
* tag 'sti-drm-next-2017-01-06' of https://github.com/vinceab/linux:
drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache
drm/sti: remove deprecated sti_vtac.c file
drm/sti: create fbdev at binding
drm/sti: update fps debugfs entries
drm/sti: do not post HQVDP command if no update
drm/sti: load XP70 firmware only once
drm/sti: allow audio playback on HDMI even if disabled.
|
|
Here, If devm_ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference. This error check
will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep sti_vtac.c file since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Do not wait for a hot plug event to create fbdev.
Cc: Tomi Valkeinen <[email protected]>
Signed-off-by: Vincent Abriou <[email protected]>
|
|
This update allows to have a clearer fps log trace by adding information
about plane size and plane pixel format.
Signed-off-by: Vincent Abriou <[email protected]>
|
|
Do not process update requests with unmodified parameters.
Since the HQVDP command queue is limited to 2, we shall take care of
not posting unneeded commands, which would abusively fill the command
queue leading to frame update skip.
This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
|
|
When a plane is enabled, after having been disabled, do not reload XP70
firmware again, but only register VTG again
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
|
|
This fix allows to play audio while HDMI is disconnected.
When HDMI is disable, audio configuration is stored and samples
are dropped (by HDMI IP).
When HDMI is enabled, audio HDMI configuration is applied and samples
are outputted on HDMI wire.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Stefan Agner <[email protected]> # For DCU
Acked-by: Boris Brezillon <[email protected]> # For atmel-hlcdc
Acked-by: Vincent Abriou <[email protected]> # For STI
Acked-by: Maxime Ripard <[email protected]> # For sun4i
Acked-by: Xinliang Liu <[email protected]> # For hisilicon
Acked-by: Jyri Sarha <[email protected]> # For tilcdc
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
|
|
Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.
Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.
@@
struct drm_framebuffer *FB;
expression E;
@@
drm_helper_mode_fill_fb_struct(...) {
...
- FB->pixel_format = E;
...
}
@@
struct drm_framebuffer *FB;
expression E;
@@
i9xx_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}
@@
struct drm_framebuffer *FB;
expression E;
@@
ironlake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}
@@
struct drm_framebuffer *FB;
expression E;
@@
skylake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}
@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)
@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)
@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)
@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)
@@
@@
struct drm_framebuffer {
...
- uint32_t pixel_format;
...
};
v2: Fix commit message (Laurent)
Rebase due to earlier removal of many fb->pixel_format uses,
including the 'fb->format = drm_format_info(fb->format->format);'
snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
changes
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Alex Deucher <[email protected]> (v1)
Reviewed-by: Laurent Pinchart <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace drm_format_plane_cpp(fb->pixel_format) with just
fb->format->cpp[]. Avoids the expensive format info lookup.
@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
expression E;
@@
(
- drm_format_plane_cpp(a->pixel_format, E)
+ a->format->cpp[E]
|
- drm_format_plane_cpp(b.pixel_format, E)
+ b.format->cpp[E]
)
@@
struct drm_plane_state *a;
struct drm_plane_state b;
expression E;
@@
(
- drm_format_plane_cpp(a->fb->pixel_format, E)
+ a->fb->format->cpp[E]
|
- drm_format_plane_cpp(b.fb->pixel_format, E)
+ b.fb->format->cpp[E]
)
@@
struct drm_framebuffer *a;
identifier T;
expression E;
@@
T = a->pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ a->format->cpp[E]
...+>
@@
struct drm_framebuffer b;
identifier T;
expression E;
@@
T = b.pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ b.format->cpp[E]
...+>
v2: Rerun spatch due to code changes
Cc: Laurent Pinchart <[email protected]>
Suggested-by: Laurent Pinchart <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Jyri Sarha <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Acked-by: Alexey Brodkin <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
|
|
Linux 4.9-rc4
This is needed for nouveau development.
|
|
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to
check for the config everywhere.
Reviewed-by: Patrik Jakobsson <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We don't want all planes to be added to the state whenever a
plane with fixed zpos gets enabled/disabled. This is true
especially for eg. cursor planes on i915, as we want cursor
updates to go through w/o throttling. Same holds for drivers
that don't support zpos at all (i915 actually falls into this
category right now since we've not yet added zpos support).
Allow drivers more freedom by letting them deal with zpos
themselves instead of doing it in drm_atomic_helper_check_planes()
unconditionally. Let's just inline the required calls into all
the driver that currently depend on this.
v2: Inline the stuff into the drivers instead of adding another
helper, document things better (Daniel)
Cc: Daniel Vetter <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Lyude <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: [email protected]
Fixes: 44d1240d006c ("drm: add generic zpos property")
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Convert DT component matching to use component_match_add_release().
Acked-by: Jyri Sarha <[email protected]>
Reviewed-by: Jyri Sarha <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_atomic_state has a complicated single owner model that tracks the
single reference from allocation through to destruction on another
thread - or perhaps on a local error path. We can simplify this tracking
by using reference counting (at a cost of a few more atomics). This is
even more beneficial when the lifetime of the state becomes more
convoluted than being passed to a single worker thread for the commit.
v2: Double check !intel atomic_commit functions for missing gets
v3: Update kerneldocs
Signed-off-by: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Reviewed-by: Eric Engestrom <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
into drm-next
Here are some patches for drm-next.
It contains:
- minor fixes for typo and warning.
- sparse and coccicheck warning fixes
- bunch of patches fixing issues found while testing drm/sti with an
atomic version of weston
- the removal of the support of stih415-416 sti platform
* 'sti-drm-next-2016-09-20' of https://github.com/vinceab/linux:
drm/sti: remove stih415-416 platform support
drm/sti: fix compositor debugfs creation
drm/sti: use valid video mode
drm/sti: in crtc_atomic_flush, enable only planes of this crtc
drm/sti: use vtg array instead of vtg_main/aux
drm/sti: use different notifier_block for each pipe
drm/sti: fix atomic_disable check
drm/sti: run gdp init sequence only once
drm/sti: run hqvdp init sequence only once
drm/sti: fix debug logs
drm/sti: dpms function missing for HDMI connector
drm/sti: Fix sparse warnings
drm: sti: fix coccicheck warnings
drm: sti: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
|
|
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.
Signed-off-by: Tom Gundersen <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
stih415 and stih416 platform are obsolete and no more supported.
Only stih407 and stih410 platform are maintained.
Signed-off-by: Vincent Abriou <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Peter Griffin <[email protected]>
|
|
Fix typo and issue while creating the vid and mixer debugfs entries.
Signed-off-by: Vincent Abriou <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
|
|
In atomic mode the crtc_xxx (eg crtc_hdisplay) members of the mode
structure may be unset before calling atomic_check/commit for planes.
Instead of, use xxx members which are actually set.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
crtc_atomic_flush performs some additional processing, like plane
enable at mixer level.
Enable only the planes attached to the CRTC.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
This is more generic and more consistent with the other members of the
sti_compositor struct.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Each pipe shall have its own notifier block to manage the vblank event.
This fixes issues where a client registered on given pipe is later
abusively notified of events on the other pipe.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
When a drm_plane is being disabled, its ->crtc member is set to NULL
before the .atomic_disable() func is called.
To get the crtc of the plane, read old_state->crtc instead of
drm_plane->crtc
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Do not rely on plane->status to define whether this is the first update
but rather check for gdp->vtg.
This avoids multiple and unwanted calls to sti_vtg_register_client()
which breaks the kernel scheduler.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Do not rely on plane->status to define whether this is the first update
but rather check for hqvdp->xp70_initialized bit status.
This avoids multiple and unwanted calls to sti_vtg_register_client()
which breaks the kernel scheduler.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Add some missing \n in logs.
Signed-off-by: Fabien Dessenne <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Signed-off-by: Vincent Abriou <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
|
|
drm/sti/sti_mixer.c:361:6: warning: symbol 'sti_mixer_set_matrix' was not declared. Should it be static?
drm/sti/sti_gdp.c:476:5: warning: symbol 'sti_gdp_field_cb' was not declared. Should it be static?
drm/sti/sti_gdp.c:885:24: warning: symbol 'sti_gdp_plane_helpers_funcs' was not declared. Should it be static?
drm/sti/sti_cursor.c:348:24: warning: symbol 'sti_cursor_plane_helpers_funcs' was not declared. Should it be static?
drm/sti/sti_compositor.c:28:28: warning: symbol 'stih407_compositor_data' was not declared. Should it be static?
drm/sti/sti_compositor.c:49:28: warning: symbol 'stih416_compositor_data' was not declared. Should it be static?
drm/sti/sti_vtg.c:75:1: warning: symbol 'vtg_lookup' was not declared. Should it be static?
drm/sti/sti_vtg.c:476:24: warning: symbol 'sti_vtg_driver' was not declared. Should it be static?
drm/sti/sti_dvo.c:109:5: warning: symbol 'dvo_awg_generate_code' was not declared. Should it be static?
drm/sti/sti_dvo.c:602:24: warning: symbol 'sti_dvo_driver' was not declared. Should it be static?
drm/sti/sti_vtac.c:209:24: warning: symbol 'sti_vtac_driver' was not declared. Should it be static?
drm/sti/sti_tvout.c:914:24: warning: symbol 'sti_tvout_driver' was not declared. Should it be static?
drm/sti/sti_hqvdp.c:786:5: warning: symbol 'sti_hqvdp_vtg_cb' was not declared. Should it be static?
drm/sti/sti_hqvdp.c:1253:24: warning: symbol 'sti_hqvdp_plane_helpers_funcs' was not declared. Should it be static?
drm/sti/sti_hqvdp.c:1292:5: warning: symbol 'sti_hqvdp_bind' was not declared. Should it be static?
drm/sti/sti_hqvdp.c:1385:24: warning: symbol 'sti_hqvdp_driver' was not declared. Should it be static?
drm/sti/sti_drv.c:143:6: warning: symbol 'sti_drm_dbg_cleanup' was not declared. Should it be static?
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
Fix four warnings shown by coccicheck.
Signed-off-by: Benjamin Gaignard <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|