aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)AuthorFilesLines
2020-11-16drm/panel: s6e63m0: Set up some display infoLinus Walleij1-0/+9
Copy over the width/height in millimeters to the (somewhat redundant) display info, and set up the bus format and bus flags for the display. When used as DPI this display requires DE to be active low and pixel data to be output on the negative edge. It might be that it was previously used with a display controller that either does not support these settings or was hardcoded to use these as default. This information comes from the source code of the Samsung GT-I9070 mobile phone. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-16drm/panel: s6e63m0: Support 3WIRE protocolLinus Walleij1-1/+2
The panel can be connected using 3WIRE, then it is however necessary that the flag SPI_3WIRE is preserved on the device, as we set this from generic device tree parsing code (or similar). Just |= the SPI mode. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-16drm/panel: s6e63m0: Add some explanationsLinus Walleij1-0/+7
The SPI DCS code was a bit hard to understand as the device accepts 9-bit transfers packed into 16-bit words with the most significant bit in bit 9 of the 16-bit word. Add some clarifying comments. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-16drm/panel: s6e63m0: Implement reading from panelLinus Walleij1-6/+13
This code was found in the Samsung vendor tree for the Samsung GT-I9070 mobile phone. Let's support reading before we implement the 3WIRE protocol for both reading and writing. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-16drm/panel: s6e63m0: Simplify SPI writingLinus Walleij1-9/+2
This writing code is equivalent to the spi_write() helper in the SPI framework. Insert a comment that this will always work fine since SPI buffers are in native endianness. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-14drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devicesCaleb Connolly3-0/+364
The OnePlus 6/T devices use different panels however they are functionally identical with the only differences being the resolution. The panels also don't seem to be used by any other devices, just combine them into one driver. The panels are: samsung,sofef00 and samsung,s6e3fc2x01 Signed-off-by: Caleb Connolly <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> [fixed checkpatch warnings] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-14drm/panel/panel-tpo-tpg110: Correct misnaming and supply missing param ↵Lee Jones1-1/+2
description Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-tpo-tpg110.c:94: warning: Function parameter or member 'panel_mode' not described in 'tpg110' drivers/gpu/drm/panel/panel-tpo-tpg110.c:372: warning: Function parameter or member 'connector' not described in 'tpg110_get_modes' Cc: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-09drm/panel: simple: Add flags to boe_nv133fhm_n61Stephen Boyd1-0/+1
Reading the EDID of this panel shows that these flags should be set. Set them so that we match what is in the EDID. Cc: Douglas Anderson <[email protected]> Cc: Bjorn Andersson <[email protected]> Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-08drm/panel: panel-simple: Add connector_type for EDT ETM0700G0DH6 panelBiju Das1-0/+1
Fix the warning message "missing connector type" by adding connector_type for EDT ETM0700G0DH6 panel. Signed-off-by: Biju Das <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-08drm: panel: simple: add missing platform_driver_unregister() in ↵Qinglang Miao1-1/+3
panel_simple_init Add the missing platform_driver_unregister() before return from panel_simple_init in the error handling case when failed to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI enabled. Signed-off-by: Qinglang Miao <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05drm/panel: panel-ilitek-ili9322: Demote non-conformant kernel-doc headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_320X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_360X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_1' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_2' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_UNKNOWN' not described in enum 'ili9322_input' Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Walleij <[email protected]> Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05drm/panel: panel-simple: Fix 'struct panel_desc's headerLee Jones1-0/+2
Struct headers should start with 'struct <name>' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-simple.c:42: warning: Cannot understand * @modes: Pointer to array of fixed modes appropriate for this panel. If Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-19drm: panel: add TDO tl070wsh30 panel driverNeil Armstrong3-0/+262
This adds support for the TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-17drm/panel: simple: Add YTC700TLAG-05-201CJagan Teki1-0/+29
Add panel timings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-17drm/panel: st7703: Make jh057n00900_panel_desc staticJason Yan1-1/+1
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol 'jh057n00900_panel_desc' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Reviewed-by: Guido Günther <[email protected]> [Use static const] Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-17drm/panel: simplify the return expression of rb070d30_panel_enable()Liu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-16drm/panel: rm68200: fix mode to 50fpsYannick Fertre1-6/+6
Compute new timings to get a framerate of 50fps with a pixel clock @54Mhz. Signed-off-by: Yannick Fertre <[email protected]> Tested-by: Philippe Cornu <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-16drm/panel: mantix: Fix panel resetGuido Günther1-7/+16
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Signed-off-by: Guido Günther <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-16drm/panel: mantix: Don't dereference NULL modeGuido Günther1-1/+1
Don't dereference mode which was just NULL checked. Signed-off-by: Guido Günther <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-10-15drm: panel: Add novatek nt36672a panel driverSumit Semwal3-0/+722
Novatek NT36672a is a generic DSI IC that drives command and video mode panels. Add the driver for it. Right now adding support for some Poco F1 phones that have an LCD panel from Tianma connected with this IC, with a resolution of 1080x2246 that operates in DSI video mode. During testing, Benni Steini <[email protected]> helped us fix the reset sequence timing (from 10ms to 20ms), to get the bootanimation to work on Android. With current AOSP, we need to increase it to 200ms - this seems to be a safe high value to avoid a white screen occasionally. Signed-off-by: Sumit Semwal <[email protected]> Cc: Benni Steini <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-24drm/panel: otm8009a: allow using non-continuous dsi clockAntonio Borneo1-1/+1
The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Changes in v2: - Added my signed-off Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Yannick Fertre <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-24drm/panel: otm8009a: remove hack to force commands in HSAntonio Borneo1-16/+2
The panel is able to receive commands in LP. The current hack to force backlight commands in HS was due to workaround an incorrect settings on DSI controller that prevents sending LP commands while video out was active. Remove the hack that forces HS commands. Changes in v2: - Added my signed-off Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Yannick Fertre <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-24drm/panel: rm68200: allow using non-continuous dsi clockYannick Fertre1-1/+1
The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Yannick Fertre <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-24drm/panel: simplify the return expression of td028ttec1_prepareQinglang Miao1-6/+1
Simplify the return expression. Signed-off-by: Qinglang Miao <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-21drm/panel: samsung: make vint_table static constJason Yan1-1/+1
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol 'vint_table' was not declared. Should it be static? While at it, make the table const as it is never modified. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-10drm/panel: s6e63m0: Add missing MODULE_LICENSEYueHaibing1-0/+4
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o Add the missing license/author/description tags. Fixes: b7b23e447687 ("drm/panel: s6e63m0: Break out SPI transport") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-06drm/panel: s6e63m0: Fix up DRM_DEV* regressionLinus Walleij3-27/+17
Ooops the panel drivers stopped to use DRM_DEV* messages and we predictably create errors by merging code that still use it. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Acked-by: David Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-05drm/panel: s6e63m0: Order enable/disable sequenceLinus Walleij1-3/+15
The upstream S6E63M0 driver has some peculiarities around the prepare/enable disable/unprepare sequence: the screen is taken out of sleep in prepare() as part of s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON in enable(). However it is just put into sleep mode directly in disable(). As disable()/enable() can be called without unprepare()/prepare() being called, this is unbalanced, we should take the display out of sleep in enable() then turn it off(). Further MIPI_DCS_SET_DISPLAY_OFF is never called balanced with MIPI_DCS_SET_DISPLAY_ON. The vendor driver for Samsung GT-I8190 (Golden) does all of these things in strict order. Augment the driver to do exit sleep/set display on in enable() and set display off/enter sleep in disable(). Further send an explicit reset pulse in power_on() so we come up in a known state, and issue the MCS_ERROR_CHECK command after setting display on like the vendor driver does. Also use the timings from the vendor driver in the sequence. Doing all of these things makes the display much more stable on the Samsung GT-I8190 when enabling/disabling the display pipeline. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Paweł Chmiel <[email protected]> Cc: Stephan Gerhold <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-05drm/panel: s6e63m0: Add code to identify panelLinus Walleij1-0/+60
We add code to identify a few different panels mounted on the s6e63m0 controller. This is necessary to achieve the proper biasing with DSI versions of the panel. Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Acked-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-05drm/panel: s6e63m0: Add reading functionalityLinus Walleij4-2/+43
This adds code to send read commands to read a single byte from the display, in order to perform MTP ID look-up of the mounted panel on the s6e63m0 controller. This is needed for proper biasing on the DSI variants. Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Acked-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-05drm/panel: s6e63m0: Add DSI transportLinus Walleij6-3/+144
This makes it possible to use the s6e63m0 panel with a DSI host, such as in the Samsung GT-I8190 (Golden) mobile phone. Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Cc: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Acked-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-05drm/panel: s6e63m0: Break out SPI transportLinus Walleij5-70/+124
This panel can be accessed using both SPI and DSI. To make it possible to probe and use the device also from a DSI bus, first break out the SPI support to its own file. Since all the panel driver does is write DCS commands to the panel, we pass a DCS write function to probe() from each subdriver. We make the Kconfig entry for SPI mode default so all current users will continue to work. Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Cc: Paweł Chmiel <[email protected]> Acked-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/384873/
2020-08-30drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-1/+1
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-29drm/panel: rm67191: Remove CLOCK_NON_CONTINUOUS flagRobert Chiras1-2/+1
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by: Robert Chiras <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-29drm/panel: simple: Add AM-1280800N3TZQW-T00HJagan Teki1-0/+29
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-21drm: panel: simple: Add KD116N21-30NV-A010Douglas Anderson1-0/+31
Values come from the vendor and have been tested on hardware. Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
2020-08-20drm/panel: novatek,nt39016: Remove 'dev' field in priv structPaul Cercueil1-6/+4
There is already a 'struct device' pointer in the drm_panel structure, that we can access easily from our priv structure, so there's no need for a separate 'dev' field there. Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-20drm/panel: novatek,nt39016: Reorder calls in probePaul Cercueil1-3/+3
The drm_panel_of_backlight() function must be called after drm_panel_init(), according to the function's documentation; otherwise the backlight won't be properly initialized. Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: Use dev_ based loggingSam Ravnborg15-345/+200
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Guido Günther <[email protected]> Cc: Jerry Han <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Icenowy Zheng <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Guido Günther <[email protected]> Cc: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: sitronix: Use dev_ based loggingSam Ravnborg2-44/+27
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Guido Günther <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Guido Günther <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: raydium: Use dev_ based loggingSam Ravnborg2-28/+23
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Guido Günther <[email protected]> Cc: Robert Chiras <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Guido Günther <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: leadtek: Use dev_ based loggingSam Ravnborg2-70/+37
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Guido Günther <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Guido Günther <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: samsung: Use dev_ based loggingSam Ravnborg6-36/+21
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Guido Günther <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Guido Günther <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-18drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panelGuido Günther3-0/+340
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org
2020-08-16drm/panel-simple: Read panel orientationDmitry Osipenko1-0/+11
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the panel-simple driver. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-16drm/panel: lvds: Read panel orientationDmitry Osipenko1-0/+9
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the generic LVDS panel. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-16drm/panel: Read panel orientation for BOE TV101WUM-NL6Derek Basehore1-0/+8
This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Derek Basehore <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-15drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panelIcenowy Zheng1-0/+217
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C controller. Add this panel's initialzation sequence and timing to ILI9881C driver. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-15drm/panel: ilitek-ili9881c: prepare for adding support for extra panelsIcenowy Zheng1-19/+37
There're more panels with ILI9881C controller than the Bananapi one supported by this driver. Extract the mode and init sequence part, to prepare the driver for adding new panels. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-08-15drm/panel: simple: Add 50Hz mode for sharp,ls020b1dd01dPaul Cercueil1-0/+12
Add a perfect 50.00 Hz frame rate mode to the list of available modes for the Sharp LS020B1DD01D panel. Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.