aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)AuthorFilesLines
2019-08-10drm/panel: ili9322: move bus_flags to get_modes()Sam Ravnborg1-18/+16
To prepare the driver to receive drm_connector only in the get_modes() callback, move bus_flags handling to ili9322_get_modes(). Signed-off-by: Sam Ravnborg <[email protected]> Acked-by: Linus Walleij <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-09drm/panel: simple: Support TI nspire panelsLinus Walleij1-0/+64
This adds support for the TI nspire panels to the simple panel roster. This code is based on arch/arm/mach-nspire/clcd.c. This includes likely the first grayscale panel supported. These panels will be used with the PL11x DRM driver. Cc: Daniel Tang <[email protected]> Cc: Fabian Vogt <[email protected]> Tested-by: Fabian Vogt <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-26drm/panel: jh057n00900: Use drm_panel_{unprepare, disable} consistentlyGuido Günther1-2/+2
We were already using the generic functions in our debugfs code, do the same in jh057n_shutdown. This was suggested by Sam Ravnborg. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a37dd5083462064f437ff62fd84e6576d8a7c8dc.1564146727.git.agx@sigxcpu.org
2019-07-26drm/panel: jh057n00900: Print error code on all DRM_DEV_ERROR()sGuido Günther1-2/+4
Most of them had these already but two mere missing. This eases debugging. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/6b237a570cb368dc4471fb8feb3a0441813cd576.1564146727.git.agx@sigxcpu.org
2019-07-26drm/panel: jh057n00900: Move mipi_dsi_dcs_set_display_off to disable()Guido Günther1-3/+3
This makes it symmetric with the panel init happening in enable(). Signed-off-by: Guido Günther <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/e2c31d34ce1f917065d590297e5115a4ca954874.1564146727.git.agx@sigxcpu.org
2019-07-26drm/panel: jh057n00900: Move panel DSI init to enable()Guido Günther1-7/+8
If the panel is wrapped in a panel_bridge it gets prepar()ed before the upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks are not enabled yet). To avoid this move the panel's first DSI access to enable() so the upstream bridge can prepare the DSI host controller in it's pre_enable(). This is also in line with other panel drivers. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/12c3495b234952aafe11980a9e06cfd246134660.1564146727.git.agx@sigxcpu.org
2019-07-26drm: panel-lvds: Spout an error if of_get_display_timing() gives an errorDouglas Anderson1-1/+4
In the patch ("video: of: display_timing: Don't yell if no timing node is present") we'll stop spouting an error directly in of_get_display_timing() if no node is present. Presumably panel-lvds should take charge of spouting its own error now. NOTE: we'll print two errors if the node was present but there were problems parsing the timing node (one in of_parse_display_timing() and this new one). Since this is a fatal error for the driver's probe (and presumably someone will be debugging), this should be OK. Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Russell King <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-26drm/panel: simple: Add support for Sharp LD-D5116Z01B panelJeffrey Hugo1-0/+29
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by: Jeffrey Hugo <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-26drm/panel: check failure cases in the probe funcNavid Emamdoost1-0/+13
The following function calls may fail and return NULL, so the null check is added. of_graph_get_next_endpoint of_graph_get_remote_port_parent of_graph_get_remote_port Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid leaking endpoint. Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard11-68/+11
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <[email protected]>
2019-07-17drm/panel: simple: document panel_desc; rename a few functionsDouglas Anderson1-6/+22
This attempts to address outstanding review feedback from commit b8a2948fa2b3 ("drm/panel: simple: Add ability to override typical timing") Specifically: * It was requested that I document (in the structure definition) that the device tree override had no effect if 'struct drm_display_mode' was used in the panel description. I have provided full Doxygen comments for 'struct panel_desc' to accomplish that. * panel_simple_get_fixed_modes() was thought to be a confusing name, so it has been renamed to panel_simple_get_display_modes(). * panel_simple_parse_override_mode() was thought to be better named as panel_simple_parse_panel_timing_node(). Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds28-85/+1181
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-12drm/panel: simple: fix AUO g185han01 horizontal blankingLucas Stach1-3/+3
The horizontal blanking periods are too short, as the values are specified for a single LVDS channel. Since this panel is dual LVDS they need to be doubled. With this change the panel reaches its nominal vrefresh rate of 60Fps, instead of the 64Fps with the current wrong blanking. Philipp Zabel added: The datasheet specifies 960 active clocks + 40/128/160 clocks blanking on each of the two LVDS channels (min/typical/max), so doubled this is now correct. Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for AUO b101ean01Douglas Anderson1-13/+12
Convert the AUO b101ean01 from using a fixed mode to specifying a display timing with min/typ/max values. The AUO b101ean01's datasheet says: * Vertical blanking min is 12 * Horizontal blanking min is 60 * Pixel clock is between 65.3 MHz and 75 MHz The goal here is to be able to specify the proper timing in device tree to use on rk3288-veyron-minnie to match what the downstream kernel is using so that it can used the fixed PLL. Changes in v4: - display_timing for AUO b101ean01 new for v4. Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for Innolux n116bgeDouglas Anderson1-14/+23
Convert the Innolux n116bge from using a fixed mode to specifying a display timing with min/typ/max values. Note that the n116bge's datasheet doesn't fit too well into DRM's way of specifying things. Specifically the panel's datasheet just specifies the vertical blanking period and horizontal blanking period and doesn't break things out. For now we'll leave everything as a fixed value but just allow adjusting the pixel clock. I've added a comment on what the datasheet claims so someone could later expand things to fit their needs if they wanted to test other blanking periods. The goal here is to be able to specify the panel timings in the device tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These Chromebooks have all been running in the downstream kernel with the standard porches and sync lengths but just with a slightly slower pixel clock because the 76.42 MHz clock is not achievable from the fixed PLL that was available. These Chromebooks only achieve a refresh rate of ~58 Hz. While it's probable that we could adjust the timings to achieve 60 Hz it's probably wisest to match what's been running on these devices all these years. I'll note that though the upstream kernel has always tried to achieve 76.42 MHz, it has actually been running at 74.25 MHz also since the video processor is parented off the same fixed PLL. Changes in v4: - display_timing for Innolux n116bge new for v4. Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Add ability to override typical timingSean Paul1-5/+104
This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: jh057n00900: Add regulator supportGuido Günther1-0/+41
Allow to specify regulators for vcc and iovcc. According to the data sheet the panel wants vcc (2.8V) and iovcc (1.8V) and there's no startup dependency between the two. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/f78611fb26329e50ec1533810fbb76562f2f4e48.1561542477.git.agx@sigxcpu.org
2019-06-26drm/panel: jh057n00900: Don't use magic constantGuido Günther1-1/+2
0xBF isn't in any ST7703 data sheet so mark it as unknown. This avoids confusion on whether there is a missing command in that dsi_generic_write_seq() call. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7f50fa6de2ae029111f158f8ea7fd69a0903eb97.1561542477.git.agx@sigxcpu.org
2019-06-26drm/panel: Add support for Raydium RM67191 panel driverRobert Chiras3-0/+678
This patch adds Raydium RM67191 TFT LCD panel driver (MIPI-DSI protocol). Signed-off-by: Robert Chiras <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Sharp LS020B1DD01D panel supportPaul Cercueil1-0/+30
The Sharp LS020B1DD01D is a simple 2.0" 240x160 16-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: Add Novatek NT39016 panel supportPaul Cercueil3-0/+369
Add support for display panels built around the Novatek NT39016 display controller, as found on e.g. the King Display KD035G6-54NT 24-bit 320x240 3.5" LCD panel which equips the GCW Zero open-source handheld gaming console. Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Maarten ter Huurne <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Ortustech COM37H3M panel supportH. Nikolaus Schaller1-0/+33
The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel. Tested on Letux3704. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/43b47034b618cff26cea0484591c6deafb7f0685.1559905870.git.hns@goldelico.com
2019-06-26drm/panel: simple: Add Sharp LQ070Y3DG3B panel supportH. Nikolaus Schaller1-0/+30
The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel. Tested on Letux7004. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/d16aaa1ac93e4f15c13cd7d621de95836257676a.1559905870.git.hns@goldelico.com
2019-06-25drm/panel: simple: Add GiantPlus GPM940B0 panel supportPaul Cercueil1-0/+28
The GiantPlus GPM940B0 is a simple 3.0" 320x240 24-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner8-32/+8
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Enrico Weigelt <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner3-36/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexios Zavras <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Enrico Weigelt <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter1-5/+1
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <[email protected]>
2019-06-13panel: rocktech: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-11/+3
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "Guido Günther" <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Guido Günther <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-05drm/panel: truly: Add additional delay after pulling down reset gpioVivek Gautam1-0/+1
MTP SDM845 panel seems to need additional delay to bring panel to a workable state. Running modetest without this change displays blurry artifacts. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-28drm/panel: drop drmP.h usageSam Ravnborg22-69/+121
Drop use of the deprecated drmP.h header file. While touching the list of include files: - Divide include files in blocks of linux/* video/* drm/* etc. Be consistent in the order of the blocks - Sort individual blocks of include files Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-28drm/panel: panel-innolux: drop unused variableSam Ravnborg1-1/+0
The num_supplies variable is not used, delete it. Build tested. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-28Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-0/+1
This picks up rc2 for us as well. Signed-off-by: Maarten Lankhorst <[email protected]>
2019-05-28Merge tag 'drm-misc-next-2019-05-24' of ↵Dave Airlie6-2/+999
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3, try #2: UAPI Changes: - Add HDR source metadata property. - Make drm.h compile on GNU/kFreeBSD by including stdint.h - Clarify how the userspace reviewer has to review new kernel UAPI. - Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough. Cross-subsystem Changes: - video/hdmi: Add unpack function for DRM infoframes. - Device tree bindings: * Updating a property for Mali Midgard GPUs * Updating a property for STM32 DSI panel * Adding support for FriendlyELEC HD702E 800x1280 panel * Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel * Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. * Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. * Adding support for EDT ETM0430G0DH6 480x272 panel. - Add OSD101T2587-53TS driver with DT bindings. - Add Samsung S6E63M0 panel driver with DT bindings. - Add VXT VL050-8048NT-C01 800x480 panel with DT bindings. - Dma-buf: - Make mmap callback actually optional. - Documentation updates. - Fix debugfs refcount inbalance. - Remove unused sync_dump function. - Fix device tree bindings in drm-misc-next after a botched merge. Core Changes: - Add support for HDR infoframes and related EDID parsing. - Remove prime sg_table caching, now done inside dma-buf. - Add shiny new drm_gem_vram helpers for simple VRAM drivers; with some fixes to the new API on top. - Small fix to job cleanup without timeout handler. - Documentation fixes to drm_fourcc. - Replace lookups of drm_format with struct drm_format_info; remove functions that become obsolete by this conversion. - Remove double include in bridge/panel.c and some drivers. - Remove drmP.h include from drm/edid and drm/dp. - Fix null pointer deref in drm_fb_helper_hotplug_event(). - Remove most members from drm_fb_helper_crtc, only mode_set is kept. - Remove race of fb helpers with userspace; only restore mode when userspace is not master. - Move legacy setup from drm_file.c to drm_legacy_misc.c - Rework scheduler job destruction. - drm/bus was removed, remove from TODO. - Add __drm_atomic_helper_crtc_reset() to subclass crtc_state, and convert some drivers to use it (conversion is not complete yet). - Bump vblank timeout wait to 100 ms for atomic. - Docbook fix for drm_hdmi_infoframe_set_hdr_metadata. Driver Changes: - sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually. - v3d: Small cleanups, adding support for compute shaders, reservation/synchronization fixes and job management refactoring, fixes MMU and debugfs. - lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs. - stm/ltdc: Assorted fixes and adding FB modifier support. - amdgpu: Avoid hw reset if guilty job was already signaled. - virtio: Add seqno to fences, add trace events, use correct flags for fence allocation. - Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API. - sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers. - bochs: Small fix to use PTR_RET_OR_ZERO and driver unload. - gma500: header fixes - cirrus: Remove unused files. - mediatek: Fix compiler warning after merging the HDR series. - vc4: Rework binner bo handling. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: st7701: Swap vertical front and back porch timingsJagan Teki1-3/+3
Vertical front and back porch values on existing driver are swapped. The existing timings are still working as expected, but to make sure it can compatible with techstar ts8550b bsp timings this patch swap the same values. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240)Lukasz Majewski1-0/+26
This commit adds support for KOE's 5.7" display. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: Add support for Armadeus ST0700 AdaptSébastien Szymanski1-0/+29
This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards. Cc: [email protected] # v4.19 Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sébastien Szymanski <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-07drm/panel: simple: Add FriendlyELEC HD702E 800x1280 LCD panelJagan Teki1-0/+26
HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM. Add support for it. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add Evervision VGG804821 panel supportMarco Felsch1-0/+30
Add support the Evervision VGG804821 800x480 5.0" WVGA TFT panel. Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for EDT ET035012DM6Andreas Pretzsch1-0/+29
Add support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. The datasheet with all specs can be retrieved online: https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \ Specifications/Active%20Displays/ET035012DM6.pdf Signed-off-by: Andreas Pretzsch <[email protected]> [[email protected]: adapt commit message] [[email protected]: rm unecessary comments] [[email protected]: correct data_enable polarity] Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: Remove duplicate headerSouptick Joarder1-1/+0
Remove duplicate header which is included twice. Signed-off-by: Souptick Joarder <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add TFC S9700RTWV43TR-01B 800x480 panel supportJyri Sarha1-0/+28
Add support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. Signed-off-by: Jyri Sarha <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ba4b2c26beec014b7b3c84a27b9413cec7ef2902.1553243203.git.jsarha@ti.com
2019-04-23drm/panel: Add support for EDT ETM0430G0DH6Marek Vasut1-0/+27
The EDT ETM0430G0DH6 is 4.3" 480x272 panel, which can be supported by the simple panel driver. Signed-off-by: Marek Vasut <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Fix panel_simple_dsi_probePeter Ujfalusi1-1/+8
In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: Add OSD101T2587-53TS driverPeter Ujfalusi3-0/+264
The panel is similar to OSD101T2045-53TS (which is handled by panel-simple) with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL message to be sent from the host to be operational and thus can not be handled by panel-simple. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for OSD101T2045-53TSPeter Ujfalusi1-0/+34
Add support for the OSD101T2045-53TS 10.1" 1920x1200 panel from One Stop Displays to the panel-simple driver Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: Add driver for Samsung S6E63M0 panelPaweł Chmiel3-0/+524
This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over spi. It's based on already removed, non-device-tree S6E63M0 driver and panel-samsung-ld9040. It can be found for example in some of Samsung Aries based phones. Signed-off-by: Paweł Chmiel <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for VXT VL050-8048NT-C01 panelFabio Estevam1-0/+29
Add support for the VXT VL050-8048NT-C01 800x480 panel to the panel-simple driver. This panel is used on some boards manufactured by TechNexion, such as imx7d-pico. Reviewed-by: Otavio Salvador <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-17drm/panel: simple: add lg,acx467akm-7 panelJonathan Marek1-0/+31
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <[email protected]> [[email protected]: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.