aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6Stefan Riedmueller1-0/+2
Add corresponding bus_format and bus_flags for the EDT ETM0430G0DH6 display. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-3-s.riedmueller@phytec.de
2021-06-21drm/panel: Add connector_type for some EDT displaysStefan Riedmueller1-0/+2
The connector_type for following two EDT displays is missing: - EDT ETM0430G0DH6 - EDT ETM0700G0BDH6 Both are parallel displays thus add the corresponding connector_type. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-2-s.riedmueller@phytec.de
2021-06-21drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panelStefan Riedmueller1-0/+2
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-1-s.riedmueller@phytec.de
2021-06-14drm/panel: s6e63m0: Switch to DBI abstraction for SPILinus Walleij5-91/+77
The SPI access to s6e63m0 is using the DBI protocol, so switch to using the elaborate DBI protocol implementation in the DRM DBI helper library. Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-2-linus.walleij@linaro.org
2021-06-11drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDCDouglas Anderson1-6/+12
If panel-simple is instantiated as a DP AUX bus endpoint then we have access to the DP AUX bus. Let's stash it in the panel-simple structure, leaving it NULL for the cases where the panel is instantiated in other ways. If we happen to have access to the DP AUX bus and we weren't provided the ddc-i2c-bus in some other manner, let's use the DP AUX bus for it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.6.I18e60221f6d048d14d6c50a770b15f356fa75092@changeid
2021-06-11drm/panel: panel-simple: Allow panel-simple be a DP AUX endpoint deviceDouglas Anderson2-4/+49
The panel-simple driver can already have devices instantiated as platform devices or MIPI DSI devices. Let's add a 3rd way to instantiate it: as DP AUX endpoint devices. At the moment there is no benefit to instantiating it in this way, but: - In the next patch we'll give it access to the DDC channel via the DP AUX bus. - Possibly in the future we may use this channel to configure the backlight. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.5.Iada41f76a7342354bae929d0bb3ceba40f27f0ea@changeid
2021-06-11drm/panel: db7430: Add driver for Samsung DB7430Linus Walleij3-0/+358
This adds a new driver for the Samsung DB7430 DPI display controller as controlled over SPI. Right now the only panel product we know that is using this display controller is the LMS397KF04 but there may be more. This is the first regular panel driver making use of the MIPI DBI helper library. The DBI "device" portions can not be used because that code assumes the use of a single regulator and specific timings around the reset pulse that do not match the DB7430 datasheet. Cc: Paul Cercueil <paul@crapouillou.net> Cc: Doug Anderson <dianders@chromium.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210610220527.366432-1-linus.walleij@linaro.org
2021-06-03drm/panel: add rotation support for Elida KD35T133 panelsChris Morgan1-0/+8
Update the panel to allow setting the rotation value in device tree. Tested on an Odroid Go Advance, where the panel is by default rotated 270 degrees. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/SN6PR06MB534253E1CFDEA6917230F57BA57A9@SN6PR06MB5342.namprd06.prod.outlook.com
2021-06-03drm/panel/panel-sitronix-st7701: Demote kernel-doc abuseLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-sitronix-st7701.c:42: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-22-lee.jones@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-23-lee.jones@linaro.org
2021-06-03drm/panel/panel-raspberrypi-touchscreen: Demote kernel-doc abuseLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-21-lee.jones@linaro.org
2021-05-24drm/panel: panel-simple: Add missing pm_runtime_dont_use_autosuspend() callsDouglas Anderson1-0/+2
The PM Runtime docs specifically call out the need to call pm_runtime_dont_use_autosuspend() in the remove() callback if pm_runtime_use_autosuspend() was called in probe(): > Drivers in ->remove() callback should undo the runtime PM changes done > in ->probe(). Usually this means calling pm_runtime_disable(), > pm_runtime_dont_use_autosuspend() etc. We should do this. This fixes a warning splat that I saw when I was testing out the panel-simple's remove(). Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210517130450.v7.1.I9e947183e95c9bd067c9c1d51208ac6a96385139@changeid
2021-05-22drm/panel: s6e63m0: Depromote debug printsLinus Walleij1-3/+3
The dev_info():s in the DSI driver are very talkative, depromote these to dev_dbg(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210313230913.4108256-1-linus.walleij@linaro.org
2021-05-03drm/panel: panel-simple: Cache the EDID as long as we retain powerDouglas Anderson1-7/+10
It doesn't make sense to go out to the bus and read the EDID over and over again. Let's cache it and throw away the cache when we turn power off from the panel. Autosuspend means that even if there are several calls to read the EDID before we officially turn the power on then we should get good use out of this cache. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.18.If050957eaa85cf45b10bcf61e6f7fa61c9750ebf@changeid
2021-05-03drm/panel: panel-simple: Power the panel when reading the EDIDDouglas Anderson1-1/+7
I don't believe that it ever makes sense to read the EDID when a panel is not powered and the powering on of the panel is the job of prepare(). Let's make sure that this happens before we try to read the EDID. We use the pm_runtime functions directly rather than directly calling the normal prepare() function because the pm_runtime functions are definitely refcounted whereas it's less clear if the prepare() one is. NOTE: I'm not 100% sure how EDID reading was working for folks in the past, but I can only assume that it was failing on the initial attempt and then working only later. This patch, presumably, will fix that. If some panel out there really can read the EDID without powering up and it's a big advantage to preserve the old behavior we can add a per-panel flag. It appears that providing the DDC bus to the panel in the past was somewhat uncommon in any case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.17.Ibd31b8f7c73255d68c5c9f5b611b4bfaa036f727@changeid
2021-05-03drm/panel: panel-simple: Remove extra call: drm_connector_update_edid_property()Douglas Anderson1-1/+0
As of commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector") the drm_get_edid() function calls drm_connector_update_edid_property() for us. There's no reason for us to call it again. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.16.Icb581b0273d95cc33ca38676c61ae6d7d2e75357@changeid
2021-05-03drm/panel: panel-simple: Get rid of hacky HPD chicken-and-egg codeDouglas Anderson1-19/+5
When I added support for the hpd-gpio to simple-panel in commit 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()"), I added a special case to handle a circular dependency I was running into on the ti-sn65dsi86 bridge chip. On my board the hpd-gpio is actually provided by the bridge chip. That was causing some circular dependency problems that I had to work around by getting the hpd-gpio late. I've now reorganized the ti-sn65dsi86 bridge chip driver to be a collection of sub-drivers. Now the GPIO part can probe separately and that breaks the chain. Let's get rid of the old code to clean things up. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.10.I40eeedc23459d1e3fc96fa6cdad775d88c6e706c@changeid
2021-04-30drm/panel: panel-simple: Add missing pm_runtime_disable() callsDouglas Anderson1-1/+4
In commit 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") we started using pm_runtime, but my patch neglected to add the proper pm_runtime_disable(). Doh! Add them now. Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.1.I9e6af2529d6c61e5daf86a15a1211121c5223b9a@changeid
2021-04-26Merge drm/drm-next into drm-misc-nextMaxime Ripard1-3/+9
Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-04-20drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepareDouglas Anderson2-21/+73
Unpreparing and re-preparing a panel can be a really heavy operation. Panels datasheets often specify something on the order of 500ms as the delay you should insert after turning off the panel before turning it on again. In addition, turning on a panel can have delays on the order of 100ms - 200ms before the panel will assert HPD (AKA "panel ready"). The above means that we should avoid turning a panel off if we're going to turn it on again shortly. The above becomes a problem when we want to read the EDID of a panel. The way that ordering works is that userspace wants to read the EDID of the panel _before_ fully enabling it so that it can set the initial mode correctly. However, we can't read the EDID until we power it up. This leads to code that does this dance (like ps8640_bridge_get_edid()): 1. When userspace requests EDID / the panel modes (through an ioctl), we power on the panel just enough to read the EDID and then power it off. 2. Userspace then turns the panel on. There's likely not much time between step #1 and #2 and so we want to avoid powering the panel off and on again between those two steps. Let's use Runtime PM to help us. We'll move the existing prepare() and unprepare() to be runtime resume() and runtime suspend(). Now when we want to prepare() or unprepare() we just increment or decrement the refcount. We'll default to a 1 second autosuspend delay which seems sane given the typical delays we see for panels. A few notes: - It seems the existing unprepare() and prepare() are defined to be no-ops if called extra times. We'll preserve that behavior but may try to remove it in a future patch. - This is a slight change in the ABI of simple panel. If something was absolutely relying on the unprepare() to happen instantly that simply won't be the case anymore. I'm not aware of anyone relying on that behavior, but if there is someone then we'll need to figure out how to enable (or disable) this new delayed behavior selectively. - In order for this to work we now have a hard dependency on "PM". From memory this is a legit thing to assume these days and we don't have to find some fallback to keep working if someone wants to build their system without "PM". Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter1-3/+9
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/panel: Convert sysfs sprintf/snprintf family to sysfs_emitTian Tao1-2/+2
Fix the following coccicheck warning: drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com
2021-04-06drm/panel: panel-dsi-cm: disable TE for nowSebastian Reichel1-3/+9
Disable TE for Droid 4 panel, since implementation is currently broken. Also disable it for N950 panel, which is untested. Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core") Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210227214542.99961-1-sebastian.reichel@collabora.com
2021-03-16Merge drm/drm-next into drm-misc-nextMaxime Ripard1-1/+2
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12 merge due to the swap issue so it looks like a good time. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie3-4/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-03-11drm: panel: simple: Set enable delay for BOE NV110WTM-N61Douglas Anderson1-0/+1
Panel power sequence says timing T8 (time from link idle to turn on the backlight) should be at least 50 ms. This is what the .enable delay in simple-panel is for, so set it. NOTE: this overlaps with the 80 ms .prepare_to_enable delay on purpose. The data sheet says that at least 80 ms needs to pass between HPD going high and turning on the backlight and that at least 50 ms needs to pass between the link idle and the backlight going on. Thus it works like this on the system in front of me: * In bridge chip pre_enable call drm_panel_prepare() * drm_panel_prepare() -> panel_simple_prepare() * Wait for HPD GPIO to go high. * Start counting for 80 ms (store in prepared_time) * In bridge chip enable, train link then call drm_panel_enable() * drm_panel_enable() -> panel_simple_enable() * panel_simple_enable() does hardcoded 50 ms delay then enforces 80 ms from HPD going high (in case the bridge took less than 30 ms to enable / link train). * drm_panel_enable() -> backlight_enable(). Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222081716.1.I1a45aece5d2ac6a2e73bbec50da2086e43e0862b@changeid
2021-03-11drm/panel-simple: Add N116BCA-EA1Douglas Anderson1-0/+33
This panel is quite similar to the similarly named N116BGE panel (the nominal timings are, in fact identical). However, let's add a new entry because the full range of clocks listed for N116BGE aren't supported for N116BCA-EA1, at least according to the datasheet. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.5.I3c01f3aab8335cb509da7009d8938c1a27a266dc@changeid
2021-03-11drm/panel-simple: Retry if we timeout waiting for HPDDouglas Anderson1-3/+29
On an Innolux N116BCA panel that I have in front of me, sometimes HPD simply doesn't assert no matter how long you wait for it. As per the very wise advice of The IT Crowd ("Have you tried turning it off and on again?") it appears that power cycling is enough to kick this panel back into a sane state. >From tests on this panel, it appears that leaving it powered off for a while stimulates the problem. Adding a 6 second sleep at the start of panel_simple_prepare_once() makes it happen fairly reliably and, with this delay, I saw up to 3 retries needed sometimes. Without the 6 second sleep, however, the panel came up much more reliably the first time or after only 1 retry. While it's unknown what the problems are with this panel (and probably the hardware should be debugged), adding a few retries to the power on routine doesn't seem insane. Even if this panel's problems are attributed to the fact that it's pre-production and/or can be fixed, retries clearly can help in some cases and really don't hurt. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.3.I6916959daa7c5c915e889442268d23338de17923@changeid
2021-03-11drm/panel-simple: Don't wait longer for HPD than hpd_absent_delayDouglas Anderson1-1/+7
If a panel has an hpd_absent_delay specified then we know exactly how long the maximum time is before HPD must be asserted. That means we can use it as a timeout for polling the HPD pin instead of using an arbitrary timeout. This is especially useful for dealing with panels that periodically fail to power on and need to be retried. We can detect the problem sooner. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.2.I183b1817610d7a82fdd3bc852e96d2985df9623f@changeid
2021-03-11drm/panel-simple: Undo enable if HPD never assertsDouglas Anderson1-2/+9
If the HPD signal never asserts in panel_simple_prepare() and we return an error, we should unset the enable GPIO and disable the regulator to make it consistent for the caller. At the moment I have some hardware where HPD sometimes doesn't assert. Obviously that needs to be debugged, but this patch makes it so that if I add a retry that I can make things work. Fixes: 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.1.I33fcbd64ab409cfe4f9491bf449f51925a4d3281@changeid
2021-03-04drm/mcde/panel: Inverse misunderstood flagLinus Walleij4-8/+3
A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to MIPI_DSI_MODE_NO_EOT_PACKET brought to light the misunderstanding in the current MCDE driver and all its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET would mean "use EOT packet" when in fact it means the reverse. Fix it up by implementing the flag right in the MCDE DSI driver and remove the flag from panels that actually want the EOT packet. Suggested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE") Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels") Fixes: ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel") Fixes: 435e06c06cb2 ("drm/panel: s6e63m0: Add DSI transport") Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel") Link: https://patchwork.freedesktop.org/patch/msgid/20210304004138.1785057-1-linus.walleij@linaro.org
2021-02-25drm/panel: kd35t133: allow using non-continuous dsi clockHeiko Stuebner1-1/+2
The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Also the flag actually becomes necessary after commit c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock") and without it the panel only emits stripes instead of output. Fixes: c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Christopher Morgan <macromorgan@hotmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210206135020.1991820-1-heiko@sntech.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-10drm: use getter/setter functionsJulia Lawall3-4/+4
Use getter and setter functions, for platform_device structures and a mipi_dsi_device structure. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr
2021-01-18drm/panel: panel-simple: add bus-format and connector-type to Innolux n116bgeHeiko Stuebner1-0/+2
The Innolux n116bge panel has an eDP connector and 3*6 bits bus format. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210109130951.3448435-1-heiko@sntech.de
2020-12-30drm/panel: s6e63m0: Support max-brightnessLinus Walleij1-4/+13
The "max-brightness" is a standard backlight property that we need to support for the Samsung GT-I8190 Golden because the display will go black if we crank up the brightness too high. As the platform needs this ability to give picture this is a regression fix along with the addition of the property to the GT-I8190 device tree. Cc: Stephan Gerhold <stephan@gerhold.net> Fixes: 9c3f0a0dd6a1 ("drm/panel: s6e63m0: Implement 28 backlight levels") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201214222210.238081-1-linus.walleij@linaro.org
2020-12-15drm/panel: panel-dsi-cm: drop unneeded includesTomi Valkeinen1-2/+0
Drop unneeded includes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-74-tomi.valkeinen@ti.com
2020-12-15drm/panel: panel-dsi-cm: add panel database to driverTomi Valkeinen1-38/+66
Add a panel database to the driver instead of reading propertes from DT data. This is similar to panel-simple, and I believe it's more future safe way to handle the panels. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-73-tomi.valkeinen@ti.com
2020-12-15drm/panel: panel-dsi-cm: remove extra 'if'Tomi Valkeinen1-5/+3
We have a useless 'if' in the dsicm_bl_update_status(), a left over from the conversion to DRM model. Drop the if. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-72-tomi.valkeinen@ti.com
2020-12-15drm/panel: panel-dsi-cm: set column & page at setupTomi Valkeinen1-0/+20
Set the column & page address once during setup, instead of relying the DSI host driver to set those. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-61-tomi.valkeinen@ti.com
2020-12-15drm/panel: panel-dsi-cm: cleanup tear enableTomi Valkeinen1-19/+4
Simplify the code by moving code from _dsicm_enable_te() into dsicm_power_on(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-57-tomi.valkeinen@ti.com
2020-12-15drm/panel: panel-dsi-cm: use MIPI_DCS_GET_ERROR_COUNT_ON_DSITomi Valkeinen1-2/+1
Use the common MIPI_DCS_GET_ERROR_COUNT_ON_DSI define instead of driver's own. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-56-tomi.valkeinen@ti.com
2020-12-15drm/panel: Move OMAP's DSI command mode panel driverSebastian Reichel3-0/+647
The panel driver is no longer using any OMAP specific APIs, so let's move it into the generic panel directory. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com
2020-12-15Merge drm/drm-next into drm-misc-nextMaarten Lankhorst1-1/+1
Required backmerge since we will be based on top of v5.11, and there has been a request to backmerge already to upstream some features. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-12-15Merge tag 'drm-misc-next-2020-11-27-1' of ↵Daniel Vetter2-69/+304
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: Cross-subsystem Changes: * char/agp: Disable frontend without CONFIG_DRM_LEGACY * mm: Fix fput in mmap error path; Introduce vma_set_file() to change vma->vm_file Core Changes: * dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code; Skip sync for unmapped buffers; Alloc higher order pages is available; Respect num_fences when initializing shared fence list * doc: Improvements around DRM modes and SCALING_FILTER * Pass full state to connector atomic functions + callee updates * Cleanups * shmem: Map pages with caching by default; Cleanups * ttm: Fix DMA32 for global page pool * fbdev: Cleanups * fb-helper: Update framebuffer after userspace writes; Unmap console buffer during shutdown; Rework damage handling of shadow framebuffer Driver Changes: * amdgpu: Multi-hop fixes, Clenaups * imx: Fix rotation for Vivante tiled formats; Support nearest-neighour skaling; Cleanups * mcde: Fix RGB formats; Support DPI output; Cleanups * meson: HDMI clock fixes * panel: Add driver and bindings for Innolux N125HCE-GN1 * panel/s6e63m0: More backlight levels; Fix init; Cleanups * via: Clenunps * virtio: Use fence ID for handling fences; Cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
2020-12-15drm/panel: khadas: Fix error code in khadas_ts050_panel_add()Dan Carpenter1-1/+1
There is a copy and paste bug so it didn't return the correct error code. Fixes: b215212117f7 ("drm: panel: add Khadas TS050 panel driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/X9NEfmgGilaXJs2R@mwanda
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds17-57/+1807
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-08drm/panel: mantix: Support panel from Shenzhen Yashi Changhua Intelligent ↵Guido Günther1-0/+16
Technology Co The panel uses the same driver IC and has the same resolution but a slightly different default mode. It seems it can work with the same init sequence. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/8855b4fc681c675182ce33e0a6cba46bab2bac43.1605688147.git.agx@sigxcpu.org
2020-12-08drm/panel: mantix: Allow to specify default mode for different panelsGuido Günther1-7/+11
This can be used to use different modes for differnt panels via OF device match. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/2580dba34c95a8159c1bdfd07604fbb8dbd0ad8c.1605688147.git.agx@sigxcpu.org
2020-12-08drm/panel: mantix: Tweak init sequenceGuido Günther1-0/+5
We've seen some (non permanent) burn in and bad white balance on some of the panels. Adding this bit from a vendor supplied sequence fixes it. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/8451831b60d5ecb73a156613d98218a31bd55680.1605688147.git.agx@sigxcpu.org
2020-12-08drm/panel: st7703: Use dev_err_probeGuido Günther1-16/+8
Less code and easier probe deferral debugging. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/36405038d93eb148f3e8ed8e5ea70de8e87afd78.1605688147.git.agx@sigxcpu.org
2020-12-07drm: panel: add Khadas TS050 panel driverNeil Armstrong3-0/+882
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. The init values was taken from the vendor source tree, comments were added to the know values but most of the init table is undocumented. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> [narmstrong: call drm_panel_remove if mipi_dsi_attach fails] Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com
Powered by cgit, Gruvboxed by Blaster4385.