aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-08drm/panel: Add and fill drm_panel type fieldLaurent Pinchart1-1/+25
Add a type field to the drm_panel structure to report the panel type, using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS, eDP, DSI and DPI). This will be used to initialise the corresponding connector type. Update all panel drivers accordingly. The panel-simple driver only specifies the type for the known to be LVDS panels, while all other panels are left as unknown and will be converted on a case-by-case basis as they all need to be carefully reviewed. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-24drm/panel: Initialise panel dev and funcs through drm_panel_init()Laurent Pinchart1-3/+1
Instead of requiring all drivers to set the dev and funcs fields of drm_panel manually after calling drm_panel_init(), pass the data as arguments to the function. This simplifies the panel drivers, and will help future refactoring when adding new arguments to drm_panel_init(). The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection to verify that no call to drm_panel_init() with a single argument still exists. @@ expression panel; expression device; identifier ops; @@ drm_panel_init(&panel + , device, &ops ); ... ( -panel.dev = device; -panel.funcs = &ops; | -panel.funcs = &ops; -panel.dev = device; ) Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-09drm/panel: simple: Support TI nspire panelsLinus Walleij1-0/+64
This adds support for the TI nspire panels to the simple panel roster. This code is based on arch/arm/mach-nspire/clcd.c. This includes likely the first grayscale panel supported. These panels will be used with the PL11x DRM driver. Cc: Daniel Tang <[email protected]> Cc: Fabian Vogt <[email protected]> Tested-by: Fabian Vogt <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-26drm/panel: simple: Add support for Sharp LD-D5116Z01B panelJeffrey Hugo1-0/+29
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by: Jeffrey Hugo <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-17drm/panel: simple: document panel_desc; rename a few functionsDouglas Anderson1-6/+22
This attempts to address outstanding review feedback from commit b8a2948fa2b3 ("drm/panel: simple: Add ability to override typical timing") Specifically: * It was requested that I document (in the structure definition) that the device tree override had no effect if 'struct drm_display_mode' was used in the panel description. I have provided full Doxygen comments for 'struct panel_desc' to accomplish that. * panel_simple_get_fixed_modes() was thought to be a confusing name, so it has been renamed to panel_simple_get_display_modes(). * panel_simple_parse_override_mode() was thought to be better named as panel_simple_parse_panel_timing_node(). Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: fix AUO g185han01 horizontal blankingLucas Stach1-3/+3
The horizontal blanking periods are too short, as the values are specified for a single LVDS channel. Since this panel is dual LVDS they need to be doubled. With this change the panel reaches its nominal vrefresh rate of 60Fps, instead of the 64Fps with the current wrong blanking. Philipp Zabel added: The datasheet specifies 960 active clocks + 40/128/160 clocks blanking on each of the two LVDS channels (min/typical/max), so doubled this is now correct. Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for AUO b101ean01Douglas Anderson1-13/+12
Convert the AUO b101ean01 from using a fixed mode to specifying a display timing with min/typ/max values. The AUO b101ean01's datasheet says: * Vertical blanking min is 12 * Horizontal blanking min is 60 * Pixel clock is between 65.3 MHz and 75 MHz The goal here is to be able to specify the proper timing in device tree to use on rk3288-veyron-minnie to match what the downstream kernel is using so that it can used the fixed PLL. Changes in v4: - display_timing for AUO b101ean01 new for v4. Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for Innolux n116bgeDouglas Anderson1-14/+23
Convert the Innolux n116bge from using a fixed mode to specifying a display timing with min/typ/max values. Note that the n116bge's datasheet doesn't fit too well into DRM's way of specifying things. Specifically the panel's datasheet just specifies the vertical blanking period and horizontal blanking period and doesn't break things out. For now we'll leave everything as a fixed value but just allow adjusting the pixel clock. I've added a comment on what the datasheet claims so someone could later expand things to fit their needs if they wanted to test other blanking periods. The goal here is to be able to specify the panel timings in the device tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These Chromebooks have all been running in the downstream kernel with the standard porches and sync lengths but just with a slightly slower pixel clock because the 76.42 MHz clock is not achievable from the fixed PLL that was available. These Chromebooks only achieve a refresh rate of ~58 Hz. While it's probable that we could adjust the timings to achieve 60 Hz it's probably wisest to match what's been running on these devices all these years. I'll note that though the upstream kernel has always tried to achieve 76.42 MHz, it has actually been running at 74.25 MHz also since the video processor is parented off the same fixed PLL. Changes in v4: - display_timing for Innolux n116bge new for v4. Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Add ability to override typical timingSean Paul1-5/+104
This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Sharp LS020B1DD01D panel supportPaul Cercueil1-0/+30
The Sharp LS020B1DD01D is a simple 2.0" 240x160 16-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Ortustech COM37H3M panel supportH. Nikolaus Schaller1-0/+33
The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel. Tested on Letux3704. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/43b47034b618cff26cea0484591c6deafb7f0685.1559905870.git.hns@goldelico.com
2019-06-26drm/panel: simple: Add Sharp LQ070Y3DG3B panel supportH. Nikolaus Schaller1-0/+30
The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel. Tested on Letux7004. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/d16aaa1ac93e4f15c13cd7d621de95836257676a.1559905870.git.hns@goldelico.com
2019-06-25drm/panel: simple: Add GiantPlus GPM940B0 panel supportPaul Cercueil1-0/+28
The GiantPlus GPM940B0 is a simple 3.0" 320x240 24-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-28drm/panel: drop drmP.h usageSam Ravnborg1-4/+5
Drop use of the deprecated drmP.h header file. While touching the list of include files: - Divide include files in blocks of linux/* video/* drm/* etc. Be consistent in the order of the blocks - Sort individual blocks of include files Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240)Lukasz Majewski1-0/+26
This commit adds support for KOE's 5.7" display. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: Add support for Armadeus ST0700 AdaptSébastien Szymanski1-0/+29
This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards. Cc: [email protected] # v4.19 Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sébastien Szymanski <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-07drm/panel: simple: Add FriendlyELEC HD702E 800x1280 LCD panelJagan Teki1-0/+26
HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM. Add support for it. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add Evervision VGG804821 panel supportMarco Felsch1-0/+30
Add support the Evervision VGG804821 800x480 5.0" WVGA TFT panel. Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for EDT ET035012DM6Andreas Pretzsch1-0/+29
Add support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. The datasheet with all specs can be retrieved online: https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \ Specifications/Active%20Displays/ET035012DM6.pdf Signed-off-by: Andreas Pretzsch <[email protected]> [[email protected]: adapt commit message] [[email protected]: rm unecessary comments] [[email protected]: correct data_enable polarity] Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add TFC S9700RTWV43TR-01B 800x480 panel supportJyri Sarha1-0/+28
Add support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. Signed-off-by: Jyri Sarha <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ba4b2c26beec014b7b3c84a27b9413cec7ef2902.1553243203.git.jsarha@ti.com
2019-04-23drm/panel: Add support for EDT ETM0430G0DH6Marek Vasut1-0/+27
The EDT ETM0430G0DH6 is 4.3" 480x272 panel, which can be supported by the simple panel driver. Signed-off-by: Marek Vasut <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Fix panel_simple_dsi_probePeter Ujfalusi1-1/+8
In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for OSD101T2045-53TSPeter Ujfalusi1-0/+34
Add support for the OSD101T2045-53TS 10.1" 1920x1200 panel from One Stop Displays to the panel-simple driver Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for VXT VL050-8048NT-C01 panelFabio Estevam1-0/+29
Add support for the VXT VL050-8048NT-C01 800x480 panel to the panel-simple driver. This panel is used on some boards manufactured by TechNexion, such as imx7d-pico. Reviewed-by: Otavio Salvador <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-17drm/panel: simple: add lg,acx467akm-7 panelJonathan Marek1-0/+31
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <[email protected]> [[email protected]: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-03-18drm/panel: simple: Add OSD070T1718-19TS panel supportLaurent Pinchart1-0/+29
Add support for the OSD070T1718-19TS 7" 800x480 panel from One Stop Displays to the panel-simple driver. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2019-03-18drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart1-12/+12
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Linus Walleij <[email protected]> Reviewed-by: Stefan Agner <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2019-01-28drm/panel: simple: Add support for PDA 91-00156-A0 panelEugen Hristev1-0/+27
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-28drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCDPaul Kocialkowski1-0/+27
This adds support for the 3.5" LCD panel from LeMaker, sold for use with BananaPi boards. It comes with a 24-bit RGB888 parallel interface and requires an active-low DE signal Signed-off-by: Paul Kocialkowski <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-12-03drm/panel: simple: Add AUO G101EVN010 panel supportAlex Gonzalez1-0/+27
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <[email protected]> Reviewed-by: Rob Herring <[email protected]> [[email protected]: sort new entry alphabetically] Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-9/+20
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <[email protected]>
2018-11-02drm/panel: Add simple panel mode for the ARM RTSMLinus Walleij1-0/+30
Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Mali DP Maintainers <[email protected]> Cc: Robin Murphy <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1Douglas Anderson1-7/+7
As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAMDouglas Anderson1-0/+1
If the HPD signal isn't hooked up to this panel we need a 200 ms delay. In the datasheet this is shown as the maximum time that HPD will take to be asserted after power is given to the panel. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Support panels with HPD where HPD isn't connectedDouglas Anderson1-2/+12
Some eDP panels that are designed to be always connected to a board use their HPD signal to signal that they've finished powering on and they're ready to be talked to. However, for various reasons it's possible that the HPD signal from the panel isn't actually hooked up. In the case where the HPD isn't hooked up you can look at the timing diagram on the panel datasheet and insert a delay for the maximum amount of time that the HPD might take to come up. Let's add support in simple-panel for this concept. At the moment we will co-opt the existing "prepare" delay to keep track of the delay and we'll use a boolean to specify that a given panel should only apply the delay if the "no-hpd" property was specified. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: Add DLC1010GIG panelMarco Felsch1-0/+33
Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the simple-panel driver. Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panelChen-Yu Tsai1-0/+25
This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: add panel CDTech S043WQ26H-CT7 to panel-simpleGiulio Benetti1-0/+28
This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: add panel CDTech S070WV95-CT16 to panel-simpleGiulio Benetti1-0/+27
This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: fix BOE/HV070WSA-100 timingsAndrzej Hajda1-7/+7
Panel timings were taken from vendor code and are not fully correct - refresh rate is about 50Hz instead of 60Hz. The patch fixes it. Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-08-14drm/panel: simple: tv123wam: Add unprepare delaySean Paul1-0/+3
The panel datasheet specifies a 500ms delay after power-down before re-enabling. Changes in v2: - None Changes in v3: - Added to the set Cc: Sandeep Panda <[email protected]> Reviewed-by: Sandeep Panda <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter1-1/+1
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-11drm/panel: simple: Add Sharp LQ035Q7DB03 panel supportVladimir Zapolskiy1-0/+27
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel. Note that this aged panel is already found in the kernel sources, for instance in board mach files mach-mx21ads.c, mach-mx27ads.c, mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts. Signed-off-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for DataImage SCF0700C48GGU18Michal Vokáč1-0/+29
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by: Michal Vokáč <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for Innolux G070Y2-L01Christoph Fritz1-2/+35
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by: Christoph Fritz <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add newhaven, nhd-4.3-480272ef-atxl LCDTomi Valkeinen1-0/+30
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by: Tomi Valkeinen <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for BOE HV070WSA-100 panel to simple-panelAndrzej Hajda1-0/+25
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: Maciej Purski <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add DLC DLC0700YZG-1 panelPhilipp Zabel1-0/+32
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by: Philipp Zabel <[email protected]> [[email protected]: fix typo in compatible dt-binding] [[email protected]: add property bindings] Signed-off-by: Marco Felsch <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: Add support for the EDT ETM0700G0EDH6Jan Tuerk1-0/+3
The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by: Jan Tuerk <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: Add support for the EDT ETM0700G0BDH6Jan Tuerk1-0/+15
The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by: Jan Tuerk <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.