aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17drm/panel: simple: add lg,acx467akm-7 panelJonathan Marek1-0/+31
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <[email protected]> [[email protected]: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-03-18drm/panel: simple: Add OSD070T1718-19TS panel supportLaurent Pinchart1-0/+29
Add support for the OSD070T1718-19TS 7" 800x480 panel from One Stop Displays to the panel-simple driver. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2019-03-18drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart1-12/+12
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Linus Walleij <[email protected]> Reviewed-by: Stefan Agner <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2019-01-28drm/panel: simple: Add support for PDA 91-00156-A0 panelEugen Hristev1-0/+27
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-28drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCDPaul Kocialkowski1-0/+27
This adds support for the 3.5" LCD panel from LeMaker, sold for use with BananaPi boards. It comes with a 24-bit RGB888 parallel interface and requires an active-low DE signal Signed-off-by: Paul Kocialkowski <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-12-03drm/panel: simple: Add AUO G101EVN010 panel supportAlex Gonzalez1-0/+27
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <[email protected]> Reviewed-by: Rob Herring <[email protected]> [[email protected]: sort new entry alphabetically] Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-9/+20
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <[email protected]>
2018-11-02drm/panel: Add simple panel mode for the ARM RTSMLinus Walleij1-0/+30
Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Mali DP Maintainers <[email protected]> Cc: Robin Murphy <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1Douglas Anderson1-7/+7
As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAMDouglas Anderson1-0/+1
If the HPD signal isn't hooked up to this panel we need a 200 ms delay. In the datasheet this is shown as the maximum time that HPD will take to be asserted after power is given to the panel. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-29drm/panel: simple: Support panels with HPD where HPD isn't connectedDouglas Anderson1-2/+12
Some eDP panels that are designed to be always connected to a board use their HPD signal to signal that they've finished powering on and they're ready to be talked to. However, for various reasons it's possible that the HPD signal from the panel isn't actually hooked up. In the case where the HPD isn't hooked up you can look at the timing diagram on the panel datasheet and insert a delay for the maximum amount of time that the HPD might take to come up. Let's add support in simple-panel for this concept. At the moment we will co-opt the existing "prepare" delay to keep track of the delay and we'll use a boolean to specify that a given panel should only apply the delay if the "no-hpd" property was specified. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: Add DLC1010GIG panelMarco Felsch1-0/+33
Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the simple-panel driver. Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panelChen-Yu Tsai1-0/+25
This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: add panel CDTech S043WQ26H-CT7 to panel-simpleGiulio Benetti1-0/+28
This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: add panel CDTech S070WV95-CT16 to panel-simpleGiulio Benetti1-0/+27
This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-27drm/panel: simple: fix BOE/HV070WSA-100 timingsAndrzej Hajda1-7/+7
Panel timings were taken from vendor code and are not fully correct - refresh rate is about 50Hz instead of 60Hz. The patch fixes it. Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-08-14drm/panel: simple: tv123wam: Add unprepare delaySean Paul1-0/+3
The panel datasheet specifies a 500ms delay after power-down before re-enabling. Changes in v2: - None Changes in v3: - Added to the set Cc: Sandeep Panda <[email protected]> Reviewed-by: Sandeep Panda <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter1-1/+1
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-11drm/panel: simple: Add Sharp LQ035Q7DB03 panel supportVladimir Zapolskiy1-0/+27
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel. Note that this aged panel is already found in the kernel sources, for instance in board mach files mach-mx21ads.c, mach-mx27ads.c, mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts. Signed-off-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for DataImage SCF0700C48GGU18Michal Vokáč1-0/+29
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by: Michal Vokáč <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for Innolux G070Y2-L01Christoph Fritz1-2/+35
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by: Christoph Fritz <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add newhaven, nhd-4.3-480272ef-atxl LCDTomi Valkeinen1-0/+30
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by: Tomi Valkeinen <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for BOE HV070WSA-100 panel to simple-panelAndrzej Hajda1-0/+25
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: Maciej Purski <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add DLC DLC0700YZG-1 panelPhilipp Zabel1-0/+32
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by: Philipp Zabel <[email protected]> [[email protected]: fix typo in compatible dt-binding] [[email protected]: add property bindings] Signed-off-by: Marco Felsch <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: Add support for the EDT ETM0700G0EDH6Jan Tuerk1-0/+3
The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by: Jan Tuerk <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: Add support for the EDT ETM0700G0BDH6Jan Tuerk1-0/+15
The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by: Jan Tuerk <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panelJagan Teki1-0/+33
This adds support for the Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-29display: panel: Add AUO g070vvn01 display support (800x480)Lukasz Majewski1-0/+31
This commit adds support for AUO's 7.0" display. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-18drm/panel: simple: Fix data type in KEO TX31D200VM0BAA timingsStefan Agner1-2/+2
All values in a struct struct timing_entry (every entry in struct display_timing) require an integer. Choose the closest safe integer of 32. This avoids a warning seen with clang: drivers/gpu/drm/panel/panel-simple.c:1250:27: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vfront_porch = { 6, 21, 33.5 }, ~ ^~~~ drivers/gpu/drm/panel/panel-simple.c:1251:26: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vback_porch = { 6, 21, 33.5 }, ~ ^~~~ Signed-off-by: Stefan Agner <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-18drm/panel: simple: AUO P320HVN03 uses SPWG data orderingLucas Stach1-1/+1
The patch adding support for the AUO P320HVN03 panel was written against a preliminary datasheet, which specified JEIDA data ordering. Testing with real hardware has shown that the actually used data ordering is SPWG. Fixes: 70c0d5b783f5 (drm/panel: simple: add support for AUO P320HVN03) Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-18drm/panel: simple: Add Innolux TV123WAM panel driver support[email protected]1-0/+27
Add support for Innolux TV123WAM, which is a 12.3" eDP display panel with 2160x1440 resolution. Changes in v1: - Add the compatibility string, display_mode and panel_desc structures in alphabetical order (Sean Paul). Signed-off-by: Sandeep Panda <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-05-18drm/panel: Remove drm_panel_detach() calls from all panel driversJyri Sarha1-1/+0
Remove all drm_panel_detach() calls from all panel drivers and update the kerneldoc for drm_panel_detach(). Setting the connector and drm to NULL when the DRM panel device is going away hardly serves any purpose. Usually the whole memory structure is freed right after the remove call. However, calling the detach function from the master DRM device, and setting the connector pointer to NULL, has the logic of marking the panel again as available for another DRM master to attach. The usual situation would be the same DRM master device binding again. Signed-off-by: Jyri Sarha <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
2018-03-12drm/panel: Add support for AUO G104SN02 V2 panelChristoph Fritz1-0/+26
This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM simple panel driver. Signed-off-by: Christoph Fritz <[email protected]> Signed-off-by: Stefan Riedmueller <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-12drm/panel: simple: Add support for KEO TX31D200VM0BAAJagan Teki1-0/+27
This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-12drm/panel: simple: Use display_timing for lq123p1jx31Sean Paul1-14/+13
Convert the sharp lq123p1jx31 from using a fixed mode to specifying a display timing with min/typ/max values. This allows us to capture the timings set forth in the datasheet as well as the additional values that we've cleared with the display vendor to avoid interference with the digitizer on the Samsung Chromebook Plus (kevin). A follow-on patch will specify the override mode for kevin devices. Changes in v2: - None Changes in v3: - None Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-12drm/panel: simple: Fix the bus format for the Ontat panelEric Anholt1-1/+1
This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by: Eric Anholt <[email protected]> Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17drm/panel: simple: Add Mitsubishi AA070MC01 panel supportLukasz Majewski1-0/+35
The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector). Signed-off-by: Lukasz Majewski <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-17drm/panel: simple: Add Tianma TM070RVHG71 panel supportLukasz Majewski1-0/+27
The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected via LVDS and can be supported by the simple-panel binding. Signed-off-by: Lukasz Majewski <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-19drm/panel: simple: add Toshiba LT089AC19000Lucas Stach1-0/+27
Only exposes a single mode and not a complete display timing, as the datasheet is rather vague about the minimum/maximum values. Signed-off-by: Lucas Stach <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-18drm/panel: simple: add delays for Innolux AT043TN24Philipp Zabel1-0/+4
The delays between video data and backlight enable and between backlight disable and end of video data are given as >= 160 ms in the datasheet. Signed-off-by: Philipp Zabel <[email protected]> Tested-by: Marco Franchi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-18drm/panel: simple: add bus flags for Innolux AT043TN24Philipp Zabel1-0/+1
For LCD interface controllers that support configuring polarity of pixel clock and data enable signal, specify bus flags in the panel descriptor. Signed-off-by: Philipp Zabel <[email protected]> Tested-by: Marco Franchi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-18drm/panel: simple: fix vertical timings for Innolux AT043TN24Philipp Zabel1-2/+2
The vsync length should be 10 lines, as specified in the data sheet. This gets the actual refresh rate closer to nominal 60 Hz given the 9 MHz pixel clock. Signed-off-by: Philipp Zabel <[email protected]> Tested-by: Marco Franchi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-18drm/panel: simple: Remove unneeded gpiod NULL checkFabio Estevam1-4/+2
The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-18drm/panel: simple: Add missing panel_simple_unprepare() callsJonathan Liu1-0/+2
During panel removal or system shutdown panel_simple_disable() is called which disables the panel backlight but the panel is still powered due to missing calls to panel_simple_unprepare(). Fixes: d02fd93e2cd8 ("drm/panel: simple - Disable panel on shutdown") Cc: [email protected] # v3.16+ Signed-off-by: Jonathan Liu <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-18drm/panel: simple: Fix width and height for Olimex LCD-OLinuXino-4.3TSJonathan Liu1-2/+2
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm. The width and height should be set to the active display area. Signed-off-by: Jonathan Liu <[email protected]> Fixes: cf5c9e6dc70d ("drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS") Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-18drm/panel: simple: Skip error message on deferred probeFabio Estevam1-1/+2
When enable_gpio is provided via an I2C or SPI expander, it may not be available when panel-simple probes leading to the following error: panel-simple panel: failed to request GPIO: -517 As this error message is not very useful to the end user, skip printing it in the case of deferred probe. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-14drm/panel: simple: add support for AUO P320HVN03Lucas Stach1-0/+31
This adds support for the AU Optronics Corporation 31.5" FHD (1920x1080) LVDS TFT LCD panel, which can be supported by the simple panel driver Signed-off-by: Lucas Stach <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-14drm/panel: simple: add support for NLT NL192108AC18-02DLucas Stach1-0/+29
This adds support for the NLT Technologies NL192108AC18-02D 15.6" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Timings are taken from the preliminary datasheet, as a final one is not yet available. Signed-off-by: Lucas Stach <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-14drm/panel: simple: add support for NEC NL12880B20-05Lucas Stach1-0/+30
This adds support for the NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-04-06drm/panel: simple: Add support for Winstar WF35LTIACDRichard Genoud1-0/+28
This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT LCD panel, which can be supported by the simple panel driver. Acked-by: Rob Herring <[email protected]> Signed-off-by: Richard Genoud <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.