aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-25drm/panel: simple: Add support for AUO G156XTN01.0 panelSebastian Reichel1-0/+28
Add timings for the AUO G156XTN01.0 panel. Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-25drm/panel: simple: Add support for AUO G190EAN01 panelSebastian Reichel1-0/+33
Add timings for the G190EAN01 dual channel LVDS panel. Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-17Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-11/+0
Backmerging required to pull topic/phy-compliance. Signed-off-by: Thomas Zimmermann <[email protected]>
2020-03-28drm: panel: Add Starry KR070PE2TPascal Roeleven1-0/+29
The KR070PE2T is a 7" panel with a resolution of 800x480. KR070PE2T is the marking present on the ribbon cable. As this panel is probably available under different brands, this marking will catch most devices. As I can't find a datasheet for this panel, the bus_flags are instead from trial-and-error. The flags seem to be common for these kind of panels as well. Signed-off-by: Pascal Roeleven <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-25drm/panel-simple: drop use of data-mapping propertySam Ravnborg1-11/+0
The "data-mapping" property may not be the best way to describe the interface between panels and display interfaces. Drop use of in the panel-simple driver, so we have time to find the right way to describe this interface. Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support") Cc: Sam Ravnborg <[email protected]> Cc: Oleksandr Suvorov <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: [email protected] Cc: Rob Herring <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-11drm/panel-simple: Fix dotclock for Logic PD Type 28Ville Syrjälä1-1/+1
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Adam Ford <[email protected]> Cc: Sam Ravnborg <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Adam Ford <[email protected]>
2020-03-10drm/panel-simple: Fix dotclock for Ortustech COM37H3MH. Nikolaus Schaller1-6/+6
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. There are two variants of the COM37H3M panel. The older one's COM37H3M05DTC data sheet specifies: MIN TYP MAX CLK frequency fCLK -- 22.4 26.3 MHz (in VGA mode) VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv -- 650 -- H HSYNC frequency fHSYNC -- 39.3 -- kHz HSYNC cycle time th -- 570 -- CLK The newer one's COM37H3M99DTC data sheet says: MIN TYP MAX CLK frequency fCLK 18 19.8 27 MHz VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv 646 650 700 H HSYNC frequency fHSYNC -- 39.0 50.0 kHz HSYNC cycle time th 504 508 630 CLK So we choose a parameter set that lies within the specs of both variants. We start at .vrefresh = 60, choose .htotal = 570 and .vtotal = 650 and end up in a clock of 22.230 MHz. Reported-by: Ville Syrjala <[email protected]> Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com
2020-03-10drm: panel: Set connector type for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-0/+1
The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type accordingly. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-07Revert "drm/panel: simple: Add support for Sharp LQ150X1LG11 panels"Peter Rosin1-27/+0
This reverts commit 0f9cdd743f7f8d470fff51b11250f02fc554cf1b. The interface of the panel is LVDS, not parallel. The color depth is RGB888, not RGB565. The panel has additional features, making it not so simple. The only user (upstream) of this panel is appropriately using panel-lvds. Suggested-by: Thierry Reding <[email protected]> Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Peter Rosin <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-29drm/panel: simple: add panel-dpi supportSam Ravnborg1-2/+72
The panel-dpi compatible is a fallback that allows the DT to specify the timing. When matching panel-dpi expect the device tree to include the timing information for the display-panel. Background for this change: There are a lot of panels and new models hits the market very often. It is a lost cause trying to chase them all and users of new panels will often find them in situations that the panel they ues are not supported by the kernel. On top of this a lot of panels are customized based on customer specifications. Including the panel timing in the device tree allows for a simple way to describe the actual HW and use this description in a generic way in the kernel. This allows uses of proprietary panels, or panels which are not included in the kernel, to specify the timing in the device tree together with all the other HW descriptions. And thus, using the device tree it is then easy to add support for an otherwise unknown panel. The current support expect panels that do not require any delays for prepare/enable/disable/unprepare. Oleksandr Suvorov replied: I've just tested this patch on Apalis iMX6Q and Colibri iMX7D using panel settings from the following patch: https://lore.kernel.org/linux-arm-kernel/[email protected]/ It works for me, thanks! Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Tested-by: Oleksandr Suvorov <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Oleksandr Suvorov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-27drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A panel ↵Vasily Khoruzhick1-0/+48
support This commit adds support for the NewEast Optoelectronics CO., LTD WJFH116008A 11.6" 1920x1080 TFT LCD panel. Signed-off-by: Vasily Khoruzhick <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-22drm/panel: simple: fix osd070t1718_19ts sync drive edgeTomi Valkeinen1-1/+2
The panel datasheet says that the panel samples at falling edge, but does not say anything about h/v sync signals. Testing shows that if the sync signals are driven on falling edge, the picture on the panel will be slightly shifted right. Setting sync drive edge to the same as data drive edge fixes this issue. Signed-off-by: Tomi Valkeinen <[email protected]> Acked-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-11drm/panel: simple: Add Rocktech RK101II01D-CT panelJyri Sarha1-0/+32
Add support for Rocktech RK101II01D-CT, 10.1" 1280x800 TFT with LVDS interface, LED backlight and integrated Goodix GT928 capacitive touch panel. Signed-off-by: Jyri Sarha <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b543b77d8af7cbbef852d3df4595f11ac1aa0046.1581423249.git.jsarha@ti.com
2020-01-31drm/panel: simple: Fix the lt089ac29000 bus_formatBoris Brezillon1-1/+1
The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the definition to reflect this fact. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * New patch Signed-off-by: Boris Brezillon <[email protected]> Suggested-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-30drm/panel: simple: Add EDT panel supportMarian-Cristian Rotariu1-0/+34
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave Generic SODIMM Development Platform. Changes in v2: -added mandatory .connector_type field -changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18 Signed-off-by: Marian-Cristian Rotariu <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1580386118-22895-3-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
2020-01-23drm/panel: simple: add display timings for logic technologies displaysMarcel Ziswiler1-0/+67
Add display timings for the following 3 display panels manufactured by Logic Technologies Limited: - LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display 7" Parallel [1] - LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7" Parallel [2] - LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display 10.1" LVDS [3] Those panels may also be distributed by Endrich Bauelemente Vertriebs GmbH [4]. [1] https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf [2] https://docs.toradex.com/104498-7-inch-parallel-resistive-touch-display-800x480.pdf [3] https://docs.toradex.com/105952-10-1-inch-lvds-capacitive-touch-display-1280x800-datasheet.pdf [4] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30 Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Philippe Schenker <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-13drm/panel: simple: Add support for the Frida FRD350H54004 panelPaul Cercueil1-0/+30
The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for instance inside the Anbernic RG-350 handheld gaming console. v2: Order alphabetically v3: Add connector_type, and update timings according to the constraints listed in the datasheet Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-09drm/panel: simple: Add Satoz SAT050AT40H12R2 panel supportMiquel Raynal1-0/+27
Add support for the Satoz SAT050AT40H12R2 panel. Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-09drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simpleTobias Schramm1-0/+35
This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple driver. The panel is used by the pine64 Pinebook Pro. Signed-off-by: Tobias Schramm <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-09drm/panel: Add support for AUO B116XAK01 panelRob Clark1-0/+32
Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-09drm/panel: drop drm_device from drm_panelSam Ravnborg1-9/+7
The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: Robert Chiras <[email protected]> Cc: "Guido Günther" <[email protected]> Cc: Purism Kernel Team <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-09drm/panel: add drm_connector argument to get_modes()Sam Ravnborg1-13/+15
Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: Robert Chiras <[email protected]> Cc: "Guido Günther" <[email protected]> Cc: Purism Kernel Team <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-09drm/panel: simple: use drm_panel backlight supportSam Ravnborg1-39/+11
Use drm_panel infrastructure for backlight. Replace direct calls with drm_panel_*() calls to utilize the drm_panel support. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> cc: Laurent Pinchart <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-30drm/panel: simple: Add Logic PD Type 28 display supportAdam Ford1-0/+37
Previously, there was an omap panel-dpi driver that would read generic timings from the device tree and set the display timing accordingly. This driver was removed so the screen no longer functions. This patch modifies the panel-simple file to setup the timings to the same values previously used. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-09-08drm/panel: panel-simple: Set OSD070T1718 panel typeLaurent Pinchart1-0/+1
The OSD070T1718 is a DPI panel, set its type accordingly. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-09-08drm/panel: Add and fill drm_panel type fieldLaurent Pinchart1-1/+25
Add a type field to the drm_panel structure to report the panel type, using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS, eDP, DSI and DPI). This will be used to initialise the corresponding connector type. Update all panel drivers accordingly. The panel-simple driver only specifies the type for the known to be LVDS panels, while all other panels are left as unknown and will be converted on a case-by-case basis as they all need to be carefully reviewed. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-24drm/panel: Initialise panel dev and funcs through drm_panel_init()Laurent Pinchart1-3/+1
Instead of requiring all drivers to set the dev and funcs fields of drm_panel manually after calling drm_panel_init(), pass the data as arguments to the function. This simplifies the panel drivers, and will help future refactoring when adding new arguments to drm_panel_init(). The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection to verify that no call to drm_panel_init() with a single argument still exists. @@ expression panel; expression device; identifier ops; @@ drm_panel_init(&panel + , device, &ops ); ... ( -panel.dev = device; -panel.funcs = &ops; | -panel.funcs = &ops; -panel.dev = device; ) Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-09drm/panel: simple: Support TI nspire panelsLinus Walleij1-0/+64
This adds support for the TI nspire panels to the simple panel roster. This code is based on arch/arm/mach-nspire/clcd.c. This includes likely the first grayscale panel supported. These panels will be used with the PL11x DRM driver. Cc: Daniel Tang <[email protected]> Cc: Fabian Vogt <[email protected]> Tested-by: Fabian Vogt <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-26drm/panel: simple: Add support for Sharp LD-D5116Z01B panelJeffrey Hugo1-0/+29
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by: Jeffrey Hugo <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-17drm/panel: simple: document panel_desc; rename a few functionsDouglas Anderson1-6/+22
This attempts to address outstanding review feedback from commit b8a2948fa2b3 ("drm/panel: simple: Add ability to override typical timing") Specifically: * It was requested that I document (in the structure definition) that the device tree override had no effect if 'struct drm_display_mode' was used in the panel description. I have provided full Doxygen comments for 'struct panel_desc' to accomplish that. * panel_simple_get_fixed_modes() was thought to be a confusing name, so it has been renamed to panel_simple_get_display_modes(). * panel_simple_parse_override_mode() was thought to be better named as panel_simple_parse_panel_timing_node(). Suggested-by: Sam Ravnborg <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: fix AUO g185han01 horizontal blankingLucas Stach1-3/+3
The horizontal blanking periods are too short, as the values are specified for a single LVDS channel. Since this panel is dual LVDS they need to be doubled. With this change the panel reaches its nominal vrefresh rate of 60Fps, instead of the 64Fps with the current wrong blanking. Philipp Zabel added: The datasheet specifies 960 active clocks + 40/128/160 clocks blanking on each of the two LVDS channels (min/typical/max), so doubled this is now correct. Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for AUO b101ean01Douglas Anderson1-13/+12
Convert the AUO b101ean01 from using a fixed mode to specifying a display timing with min/typ/max values. The AUO b101ean01's datasheet says: * Vertical blanking min is 12 * Horizontal blanking min is 60 * Pixel clock is between 65.3 MHz and 75 MHz The goal here is to be able to specify the proper timing in device tree to use on rk3288-veyron-minnie to match what the downstream kernel is using so that it can used the fixed PLL. Changes in v4: - display_timing for AUO b101ean01 new for v4. Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Use display_timing for Innolux n116bgeDouglas Anderson1-14/+23
Convert the Innolux n116bge from using a fixed mode to specifying a display timing with min/typ/max values. Note that the n116bge's datasheet doesn't fit too well into DRM's way of specifying things. Specifically the panel's datasheet just specifies the vertical blanking period and horizontal blanking period and doesn't break things out. For now we'll leave everything as a fixed value but just allow adjusting the pixel clock. I've added a comment on what the datasheet claims so someone could later expand things to fit their needs if they wanted to test other blanking periods. The goal here is to be able to specify the panel timings in the device tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These Chromebooks have all been running in the downstream kernel with the standard porches and sync lengths but just with a slightly slower pixel clock because the 76.42 MHz clock is not achievable from the fixed PLL that was available. These Chromebooks only achieve a refresh rate of ~58 Hz. While it's probable that we could adjust the timings to achieve 60 Hz it's probably wisest to match what's been running on these devices all these years. I'll note that though the upstream kernel has always tried to achieve 76.42 MHz, it has actually been running at 74.25 MHz also since the video processor is parented off the same fixed PLL. Changes in v4: - display_timing for Innolux n116bge new for v4. Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-12drm/panel: simple: Add ability to override typical timingSean Paul1-5/+104
This patch adds the ability to override the typical display timing for a given panel. This is useful for devices which have timing constraints that do not apply across the entire display driver (eg: to avoid crosstalk between panel and digitizer on certain laptops). The rules are as follows: - panel must not specify fixed mode (since the override mode will either be the same as the fixed mode, or we'll be unable to check the bounds of the overried) - panel must specify at least one display_timing range which will be used to ensure the override mode fits within its bounds Changes in v2: - Parse the full display-timings node (using the native-mode) (Rob) Changes in v3: - No longer parse display-timings subnode, use panel-timing (Rob) Changes in v4: - Don't add mode from timing if override was specified (Thierry) - Add warning if timing and fixed mode was specified (Thierry) - Don't add fixed mode if timing was specified (Thierry) - Refactor/rename a bit to avoid extra indentation from "if" tests - i should be unsigned (Thierry) - Add annoying WARN_ONs for some cases (Thierry) - Simplify 'No display_timing found' handling (Thierry) - Rename to panel_simple_parse_override_mode() (Thierry) Changes in v5: - Added Heiko's Tested-by Changes in v6: - Rebased to drm-misc next - Added tags Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Sharp LS020B1DD01D panel supportPaul Cercueil1-0/+30
The Sharp LS020B1DD01D is a simple 2.0" 240x160 16-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-26drm/panel: simple: Add Ortustech COM37H3M panel supportH. Nikolaus Schaller1-0/+33
The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel. Tested on Letux3704. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/43b47034b618cff26cea0484591c6deafb7f0685.1559905870.git.hns@goldelico.com
2019-06-26drm/panel: simple: Add Sharp LQ070Y3DG3B panel supportH. Nikolaus Schaller1-0/+30
The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel. Tested on Letux7004. Signed-off-by: H. Nikolaus Schaller <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/d16aaa1ac93e4f15c13cd7d621de95836257676a.1559905870.git.hns@goldelico.com
2019-06-25drm/panel: simple: Add GiantPlus GPM940B0 panel supportPaul Cercueil1-0/+28
The GiantPlus GPM940B0 is a simple 3.0" 320x240 24-bit TFT panel. Signed-off-by: Paul Cercueil <[email protected]> Tested-by: Artur Rojek <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-28drm/panel: drop drmP.h usageSam Ravnborg1-4/+5
Drop use of the deprecated drmP.h header file. While touching the list of include files: - Divide include files in blocks of linux/* video/* drm/* etc. Be consistent in the order of the blocks - Sort individual blocks of include files Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240)Lukasz Majewski1-0/+26
This commit adds support for KOE's 5.7" display. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-25drm/panel: Add support for Armadeus ST0700 AdaptSébastien Szymanski1-0/+29
This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards. Cc: [email protected] # v4.19 Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sébastien Szymanski <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-07drm/panel: simple: Add FriendlyELEC HD702E 800x1280 LCD panelJagan Teki1-0/+26
HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM. Add support for it. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add Evervision VGG804821 panel supportMarco Felsch1-0/+30
Add support the Evervision VGG804821 800x480 5.0" WVGA TFT panel. Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for EDT ET035012DM6Andreas Pretzsch1-0/+29
Add support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. The datasheet with all specs can be retrieved online: https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \ Specifications/Active%20Displays/ET035012DM6.pdf Signed-off-by: Andreas Pretzsch <[email protected]> [[email protected]: adapt commit message] [[email protected]: rm unecessary comments] [[email protected]: correct data_enable polarity] Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add TFC S9700RTWV43TR-01B 800x480 panel supportJyri Sarha1-0/+28
Add support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. Signed-off-by: Jyri Sarha <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ba4b2c26beec014b7b3c84a27b9413cec7ef2902.1553243203.git.jsarha@ti.com
2019-04-23drm/panel: Add support for EDT ETM0430G0DH6Marek Vasut1-0/+27
The EDT ETM0430G0DH6 is 4.3" 480x272 panel, which can be supported by the simple panel driver. Signed-off-by: Marek Vasut <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Fix panel_simple_dsi_probePeter Ujfalusi1-1/+8
In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for OSD101T2045-53TSPeter Ujfalusi1-0/+34
Add support for the OSD101T2045-53TS 10.1" 1920x1200 panel from One Stop Displays to the panel-simple driver Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-23drm/panel: simple: Add support for VXT VL050-8048NT-C01 panelFabio Estevam1-0/+29
Add support for the VXT VL050-8048NT-C01 800x480 panel to the panel-simple driver. This panel is used on some boards manufactured by TechNexion, such as imx7d-pico. Reviewed-by: Otavio Salvador <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-04-17drm/panel: simple: add lg,acx467akm-7 panelJonathan Marek1-0/+31
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <[email protected]> [[email protected]: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.