aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/omapdrm
AgeCommit message (Collapse)AuthorFilesLines
2016-05-31drm/omap: Fix missing includesTomi Valkeinen6-0/+6
With certain kernel config options many omapdrm files fail to compile due to missing include of linux/gpio/consumer.h and linux/of.h. This patch adds those includes. Signed-off-by: Tomi Valkeinen <[email protected]> Reported-by: Dan Murphy <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]>
2016-05-31drm/omapdrm: include pinctrl/consumer.h where neededArnd Bergmann1-0/+1
In some configurations, we can build the OMAP dss driver without implictly including the pinctrl consumer definitions, causing a build error: gpu/drm/omapdrm/dss/dss.c: In function 'dss_runtime_suspend': gpu/drm/omapdrm/dss/dss.c:1268:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state' [-Werror=implicit-function-declaration] This adds an explicit #include. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-29file_inode(f)->i_mapping is f->f_mappingAl Viro1-1/+1
Signed-off-by: Al Viro <[email protected]>
2016-05-19drm/omap: DPI: rename "DSI" related namesTomi Valkeinen1-22/+22
Originally DSS only had DSI PLLs, and thus the DPI driver has functions and variables that refer to DSI or DSI PLL. Now we support DSI, VIDEO and HDMI PLLs, so it's time to remove the DSI references from the code. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: support type B PLL for DPITomi Valkeinen1-9/+22
Type A and B PLLs require a bit different calculations for the clock rates. DPI driver supports only type A PLLs. This patch adds support for the type B PLL. Type B PLLs are simpler than type A, as type B can produce a good clock for almost any rate. Thus we can just ask it to produce the pixel clock and use one as LCK and PCK dividers. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: add comments for PLL calculationsTomi Valkeinen1-0/+7
Add comments showing how the PLL clock rates are calculated. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: generalize dss_pll_calc_b()Tomi Valkeinen4-8/+17
dss_pll_calc_b() takes HDMI TMDS clock rate as a parameter. To make dss_pll_calc_b() usable for non-HDMI users, change the function to take clkout rate as parameter, and also change the current users of dss_pll_calc_b() to accommodate that. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: move HDMI PLL calc function to pll.cTomi Valkeinen6-64/+67
Move hdmi_pll_compute(), used to calculate the config for HDMI PLL, from hdmi_pll.c to pll.c, with the name of dss_pll_calc_b(), to make it available to non-HDMI users. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: rename PLL calc functionsTomi Valkeinen4-10/+10
Add a "_a" postfix to the type A PLL calc functions, to differentiate them from the type B PLL calculations which we will add shortly. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: HDMI PLL: use runtime pmTomi Valkeinen2-0/+10
To make it possible to use HDMI PLL for other video outputs than HDMI, the HDMI PLL code needs to do runtime_get/put for the HDMI IP, so that the IP (include the PLL) is enabled. To do that we also need to store the HDMI pdev in the hdmi_pll_data. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: fix DPI clkout index handlingTomi Valkeinen1-6/+6
DPI driver uses a fixed clkout index, 0. This has worked fine as the first clkout is usually used. To generalize the code and to support additional clock sources, change the code to use dss_pll_get_clkout_idx_for_src() to get the clkout index. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: cleanup DPI clock source handlingTomi Valkeinen1-30/+18
We can clean up the DPI driver's clock source handling by using the dss_clk_source instead of only a dss_pll pointer. This will also make it possible to use additional clock sources, like PLL1_3 or HDMI_PLL, which the code did not support earlier. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: cleanup dispc_fclk_rate()Tomi Valkeinen1-20/+11
With the new PLL helpers, we can clean up the dispc_fclk_rate(). This will also make dispc_fclk_rate() support clock sources it didn't support earlier. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: cleanup dispc_mgr_lclk_rate()Tomi Valkeinen1-29/+17
With the new PLL helpers, we can clean up the dispc_mgr_lclk_rate(). This will also make dispc_mgr_lclk_rate() support clock sources it didn't support earlier. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: add PLL helper funcsTomi Valkeinen2-0/+55
Add two PLL helper functions: dss_pll_find_by_src() which returns the dss_pll for the given dss_clk_source. dss_pll_get_clkout_idx_for_src() which returns the clkout index for the given dss_clk_source. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: clean up the LCD clk mux codeTomi Valkeinen3-51/+141
The code to set the clock muxes for DISPC's LCD clock inputs is very confusing. Especially on DRA7, there's an additional clock muxing that needs to be done, which at the moment is done in dpi.c using dss_ctrl_pll_set_control_mux(). Clean this all up by: - Using dss_clk_source instead of dss_pll_id, as dss_pll_id doesn't specify the clock source quite correctly. - Splitting the dss_select_lcd_clk_source() up into DSS version specific helper functions. - Using dss_ctrl_pll_set_control_mux() from the helper functions, so that dpi.c doesn't have to call it. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: add field for PLL typeTomi Valkeinen4-0/+19
DSS uses two types of PLLs, type A (DSI & Video) and type B (HDMI). The two types behave slightly differently, but we don't have the type of the PLL available anywhere for the driver. This patch adds an enum for the PLL type and a field in the PLL's HW data to store it. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: Add missing clock sourcesTomi Valkeinen2-0/+7
enum dss_clk_source does not have values for all clock sources available on OMAP4+ DSS versions. Add the missing clock sources. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: rename dss_clk_source enumsTomi Valkeinen5-55/+54
The names of the enum dss_clk_source's values are legacy names, only correct for OMAP3 DSS. Rename the names to more generic ones. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: rename dss_get_generic_clk_source_name()Tomi Valkeinen4-8/+8
Now that there is no "non-generic" version of the function to get the clock source name, lets rename dss_get_generic_clk_source_name() to dss_get_clk_source_name(). Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: remove dss_feat_get_clk_source_name()Tomi Valkeinen5-59/+11
We have two functions to return a name for clock sources for debugging purposes: dss_feat_get_clk_source_name() and dss_get_generic_clk_source_name(). The former is supposed to return a DSS IP version specific name for the clock source, and the latter is supposed to return a more generic name. All this seems a bit pointless, so let's remove the former one. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: rename omap_dss_clk_sourceTomi Valkeinen7-23/+23
'enum omap_dss_clk_source' is internal to dss. Let's rename it to 'dss_clk_source' match our naming convention. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: copy enum omap_dss_clk_sourceTomi Valkeinen1-0/+11
At the moment 'enum omap_dss_clk_source' is in omapdss.h, shared by omapdrm and omapfb. We're about to improve the omapdrm clock code, so we need to make a separate copy of the enum for each driver. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: video-pll: add missing data for clkout2 & 3Tomi Valkeinen1-0/+4
Video pll hw data is missing bitfield definitions for clkout2 and clkout3. We don't use those clkouts at the moment, so this has not caused any issues. Add the bitfields. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-19drm/omap: fix wrong variable typeTomi Valkeinen1-1/+1
'r' is supposed to be int, not u16, so fix it. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-05-17drm: Drop plane argument from __drm_atomic_helper_plane_destroy_stateDaniel Vetter1-1/+1
It's unused, and really this helper should only look at the state structure and nothing else. v2: Fix commit message (Laurent). v3: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Inki Dae <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Mark Yao <[email protected]> Acked-by: Thierry Reding <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Acked-by: Laurent Pinchart <[email protected]> Acked-by: Eric Anholt <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson4-7/+7
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected] Cc: Dave Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <[email protected]>
2016-05-02drm/omapdrm: Rename async to nonblock.Maarten Lankhorst1-2/+2
The async name is deprecated and should be changed to nonblocking. Cc: Tomi Valkeinen <[email protected]> Signed-off-by: Maarten Lankhorst <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-7-git-send-email-maarten.lankhorst@linux.intel.com
2016-04-20drm/omapdrm: Use unlocked gem unreferencingDaniel Vetter1-1/+1
For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <[email protected]> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: Tomi Valkeinen <[email protected]> Cc: Laurent Pinchart <[email protected]> Acked-by: Tomi Valkeinen <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-03-25Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-2/+3
Pull drm fixes from Dave Airlie: "Just a couple of dma-buf related fixes and some amdgpu fixes, along with a regression fix for radeon off but default feature, but makes my 30" monitor happy again" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/radeon/mst: cleanup code indentation drm/radeon/mst: fix regression in lane/link handling. drm/amdgpu: add invalidate_page callback for userptrs drm/amdgpu: Revert "remove the userptr rmn->lock" drm/amdgpu: clean up path handling for powerplay drm/amd/powerplay: fix memory leak of tdp_table dma-buf/fence: fix fence_is_later v2 dma-buf: Update docs for SYNC ioctl drm: remove excess description dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access() drm/atmel-hlcdc: use helper to get crtc state drm/atomic: use helper to get crtc state
2016-03-24Merge tag 'topic/drm-misc-2016-03-22' of ↵Dave Airlie1-2/+3
git://anongit.freedesktop.org/drm-intel into drm-next Bunch of small fixupes all over. Plus a dma-buf patch that Sumit asked me to cherry-pick since that's the only one he had in his tree. There's a sparse issue outstanding in the color mgr stuff, but Lionel is still working on something that actually appeases sparse. * tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel: dma-buf/fence: fix fence_is_later v2 dma-buf: Update docs for SYNC ioctl drm: remove excess description dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access() drm/atmel-hlcdc: use helper to get crtc state drm/atomic: use helper to get crtc state
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds46-5343/+863
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-19dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()Chris Wilson1-2/+3
Drivers, especially i915.ko, can fail during the initial migration of a dma-buf for CPU access. However, the error code from the driver was not being propagated back to ioctl and so userspace was blissfully ignorant of the failure. Rendering corruption ensues. Whilst fixing the ioctl to return the error code from dma_buf_start_cpu_access(), also do the same for dma_buf_end_cpu_access(). For most drivers, dma_buf_end_cpu_access() cannot fail. i915.ko however, as most drivers would, wants to avoid being uninterruptible (as would be required to guarrantee no failure when flushing the buffer to the device). As userspace already has to handle errors from the SYNC_IOCTL, take advantage of this to be able to restart the syscall across signals. This fixes a coherency issue for i915.ko as well as reducing the uninterruptible hold upon its BKL, the struct_mutex. Fixes commit c11e391da2a8fe973c3c2398452000bed505851e Author: Daniel Vetter <[email protected]> Date: Thu Feb 11 20:04:51 2016 -0200 dma-buf: Add ioctls to allow userspace to flush Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible Testcase: igt/prime_mmap_coherency/ioctl-errors Signed-off-by: Chris Wilson <[email protected]> Cc: Tiago Vignatti <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: David Herrmann <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Daniel Vetter <[email protected]> CC: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2016-03-16Merge tag 'topic/drm-misc-2016-03-14' of ↵Dave Airlie1-8/+0
git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits) drm: atomic helper: do not unreference error pointer drm/edid: Extract SADs properly from multiple audio data blocks drm: fix blob pointer check drm: introduce pipe color correction properties drm/atomic: Clean up update_connector_routing. drm/atomic: Clean up steal_encoder, v2. drm/atomic: Handle encoder assignment conflicts in a separate check, v3. drm/atomic: Handle encoder stealing from set_config better. drm/atomic: Always call steal_encoder, v2. drm/ast: removed optional dummy crtc mode_fixup function. drm/bochs: removed optional dummy crtc mode_fixup function. drm/fsl-dcu: removed optional dummy crtc mode_fixup function. drm/virtio: removed optional dummy crtc mode_fixup function. drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function. drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function. drm/sti: removed optional dummy crtc mode_fixup function. drm/shmobile: removed optional dummy crtc mode_fixup function. drm/msm/mdp: removed optional dummy crtc mode_fixup function. drm/omapdrm: removed optional dummy crtc mode_fixup function. drm/rcar-du: removed optional dummy crtc mode_fixup function. ...
2016-03-16drm/omap: fix panel/encoder probesTomi Valkeinen2-2/+2
The recent changes which removed platform data support from panels & encoders had a few mistakes, causing probes of DVI connector and DSI command mode panels to fail every time due to missing '!'. Fix the if()s. Signed-off-by: Tomi Valkeinen <[email protected]> Reported-by: Laurent Pinchart <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez2-11/+10
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <[email protected]> Signed-off-by: Luis R. Rodriguez <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-03-05Merge tag 'omapdrm-4.6' of ↵Dave Airlie46-5278/+860
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for v4.6 * HDMI interlace output support * DMAbuf import support * Big refactoring leading to removal of legacy code * Various non-critical fixes * tag 'omapdrm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (76 commits) drm/omap: no need to select OMAP2_DSS drm/omap: gem: Fix omap_gem_new() error path drm/omap: remove -Werror from Makefile drm/omap: remove dispc_ovl_check() drm/omap: remove dss compat code drm/omap: remove last uses of omap_overlay_manager drm/omap: DSI: remove uses of omap_overlay_manager drm/omap: VENC: remove uses of omap_overlay_manager drm/omap: SDI: remove uses of omap_overlay_manager drm/omap: HDMI4: remove uses of omap_overlay_manager drm/omap: HDMI5: remove uses of omap_overlay_manager drm/omap: DPI: remove uses of omap_overlay_manager drm/omap: remove extra manager checks on disconnect drm/omap: remove extra check in dpi and sdi drm/omap: convert dss_mgr_unregister_framedone_handler to accept omap_channel drm/omap: convert dss_mgr_register_framedone_handler to accept omap_channel drm/omap: convert dss_mgr_start_update to accept omap_channel drm/omap: convert dss_mgr_disable to accept omap_channel drm/omap: convert dss_mgr_enable to accept omap_channel drm/omap: convert dss_mgr_set_lcd_config to accept omap_channel ...
2016-03-04drm/omapdrm: removed optional dummy crtc mode_fixup function.Carlos Palminha1-8/+0
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/101f043d5fa747291c09ae765bac4d55c6e39988.1455630967.git.palminha@synopsys.com
2016-03-03drm/omap: no need to select OMAP2_DSSTomi Valkeinen1-1/+0
omapdss driver now depends on omapdrm, so we no longer should select OMAP2_DSS from omapdrm's Kconfig. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: gem: Fix omap_gem_new() error pathLaurent Pinchart1-16/+18
When an error occurs in omap_gem_new() the function calls omap_gem_free_object() to clean up. However, that function expects to be called on a fully initialized GEM object and thus crashes. Replace it by manual cleanup. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: remove -Werror from MakefileTomi Valkeinen1-1/+1
Having -Werror in the omapdrm Makefile makes development and debugging a PITA. Let's remove it. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: remove dispc_ovl_check()Tomi Valkeinen2-46/+0
dispc_ovl_check() is not used anywhere, so it can be removed. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: remove dss compat codeTomi Valkeinen11-4260/+0
We have removed all the uses of compat code from omapdrm and the non-compat parts of omapdss, so now we can remove all the compat code itself. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: remove last uses of omap_overlay_managerTomi Valkeinen1-10/+0
We have now removed all uses of 'struct omap_overlay_manager', so we can now remove the last places where it is set. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: DSI: remove uses of omap_overlay_managerTomi Valkeinen1-30/+28
We are removing the uses of 'struct omap_overlay_manager'. This patch changes DSI driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: VENC: remove uses of omap_overlay_managerTomi Valkeinen1-13/+11
We are removing the uses of 'struct omap_overlay_manager'. This patch changes VENC driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: SDI: remove uses of omap_overlay_managerTomi Valkeinen1-17/+16
We are removing the uses of 'struct omap_overlay_manager'. This patch changes SDI driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: HDMI4: remove uses of omap_overlay_managerTomi Valkeinen1-17/+13
We are removing the uses of 'struct omap_overlay_manager'. This patch changes HDMI4 driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: HDMI5: remove uses of omap_overlay_managerTomi Valkeinen1-17/+13
We are removing the uses of 'struct omap_overlay_manager'. This patch changes HDMI5 driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
2016-03-03drm/omap: DPI: remove uses of omap_overlay_managerTomi Valkeinen1-20/+20
We are removing the uses of 'struct omap_overlay_manager'. This patch changes DPI driver to use 'omap_channel' instead. Signed-off-by: Tomi Valkeinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.