aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+1
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds88-792/+13043
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig1-0/+1
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-29drm/msm: fix 32b build warnsRob Clark2-2/+2
Neither of these code-paths apply to older 32b devices, but it is rude to introduce warnings. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929001925.2916984-1-robdclark@gmail.com
2020-09-29Merge tag 'drm-msm-next-2020-09-27' of ↵Dave Airlie85-771/+13032
https://gitlab.freedesktop.org/drm/msm into drm-next * DSI support for sm8150/sm8250 * Support for per-process GPU pagetables (finally!) for a6xx. There are still some iommu/arm-smmu changes required to enable, without which it will fallback to the current single pgtable state. The first part (ie. what doesn't depend on drm side patches) is queued up for v5.10[1]. * DisplayPort support. Userspace DP compliance tool support is already merged in IGT[2] * The usual assortment of smaller fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
2020-09-25drm/msm/dp: fix incorrect function prototype of dp_debug_get()Abhinav Kumar2-1/+6
Fix the incorrect function prototype for dp_debug_get() in the dp_debug module to address compilation warning. Also add prototype for msm_dp_debugfs_init() for fixing compilation issue with other defconfigs. changes in v2: - add prototype for msm_dp_debugfs_init() Fixes: f913454aae8e ("drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-23Merge tag 'drm-misc-next-2020-09-21' of ↵Dave Airlie2-2/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
2020-09-22drm/msm/dpu: remove unused variables new_cnt and old_cnt in ↵Luo Jiaxing1-4/+2
dpu_encoder_phys_vid_vblank_irq() We found two unused variables new_cnt and old_cnt when build kernel with W=1. So delete it. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm/dpu: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao4-68/+8
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm: Leave inuse count intact on map failureAkhil P Oommen1-1/+3
Leave the inuse count intact on map failure to keep the accounting accurate. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-22drm/msm: Fix premature purging of BOAkhil P Oommen4-24/+28
In the case where we have a back-to-back submission that shares the same BO, this BO will be prematurely moved to inactive_list while retiring the first submit. But it will be still part of the second submit which is being processed by the GPU. Now, if the shrinker happens to be triggered at this point, it will result in a premature purging of this BO. To fix this, we need to refcount BO while doing submit and retire. Then, it should be moved to inactive list when this refcount becomes 0. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-20drm/msm: Remove depends on interconnectGeorgi Djakov1-1/+0
The dependency on interconnect in the Kconfig was introduced to avoid the case of interconnect=m and driver=y, but the interconnect framework has been converted from tristate to bool now. Remove the dependency as the framework can't be a module anymore. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-20drm/msm: Fix the a650 hw_apriv checkJordan Crouse1-1/+10
Commit 604234f33658 ("drm/msm: Enable expanded apriv support for a650") was checking the result of adreno_is_a650() before the gpu revision got probed in adreno_gpu_init() so it was always coming across as false. Snoop into the revision ID ahead of time to correctly set the hw_apriv flag so that it can be used by msm_gpu to properly setup global buffers. Fixes: 604234f33658 ("drm/msm: Enable expanded apriv support for a650") Reported-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-20drm/msm/dp: Sleep properly in dp_hpd_handler kthreadStephen Boyd1-3/+2
We shouldn't be waiting for an event here with a timeout of 100ms when we're not in the 'timeout' arm of the if condition. Instead we should be sleeping in the interruptible state (S) until something happens and we need to wakeup. Right now this kthread is running almost all the time because it sleeps for 100ms, wakes up, sees there's nothing to do, and then starts the process all over again. Looking at top it shows up in the D state (uninterruptible) because it uses wait_event_timeout(). FIx this up. Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Reported-by: Douglas Anderson <dianders@chromium.org> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-19drm/msm/dp: Fix crash if no DP deviceRob Clark1-1/+2
Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-17Merge branch 'for-5.10-drm-sg-fix' of https://github.com/mszyprow/linux into ↵Dave Airlie3-17/+13
drm-next Please pull a set of fixes for various DRM drivers that finally resolve incorrect usage of the scatterlists (struct sg_table nents and orig_nents entries), what causes issues when IOMMU is used. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910080505.24456-1-m.szyprowski@samsung.com
2020-09-15drm/msm/dp: Use qmp phy for DP PLL and PHYStephen Boyd18-1762/+78
Make the necessary changes to the DP driver to use the qmp phy from the common phy framework instead of rolling our own in the drm subsystem. This also removes the PLL code and adds proper includes so things build. Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: remove mode hard-coding in case of DP CTSAbhinav Kumar3-53/+2
No need to fix the number of resolutions to one during the video pattern CTS test. The userspace test client will handle both the hotplug as well as picking the right resolution for the test. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add debugfs nodes for video pattern testsAbhinav Kumar2-0/+207
Add the debugfs nodes needed for the video pattern compliance tests to MSM DP driver. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/Abhinav Kumar5-35/+44
Move the MSM DP debugfs node from /sys/kernel/debug/drm_dp to /sys/kernel/debug/dri/*/ as required for video pattern compliance test suite. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add debugfs support to DP driverAbhinav Kumar4-1/+396
To prepare the MSM DP driver for running video pattern compliance tests introduce debugfs module for it. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: wait for audio notification before disabling clocksAbhinav Kumar3-5/+70
In the current implementation, there is a very small window for the audio side to safely signal the hdmi_code_shutdown() before the clocks are disabled. Add some synchronization between the DP display and DP audio module to safely disable the clocks to avoid unclocked access from audio side. In addition, audio side can open the sound card even if DP monitor is not connected. Avoid programming hardware registers in this case and bail out early. Changes in v4: - removed some leftover prints Changes in v5: - fix crash when user tries to play audio in suspended state Changes in v6: - rebased on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: signal the hotplug disconnect in the event handlerAbhinav Kumar1-9/+10
Signal the hotplug disconnect event to the audio side in the event handler so that they are notified earlier and have more time to process the disconnect event. Changes in v2: none Changes in v3: none Changes in v4: rebase on top of latest patchset of dependency Changes in v5: rebase on top of latest patchset of dependency Changes in v6: none Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add hook_plugged_cb hdmi-codec op for MSM DP driverAbhinav Kumar3-1/+55
Add the hook_plugged_cb op for the MSM DP driver to signal connect and disconnect events to the hdmi-codec driver which in-turn shall notify the audio subsystem to start a new or teardown an existing session. Changes in v2: none Changes in v3: none Changes in v4: rebase on top of latest patchset of dependency Changes in v5: rebase on top of latest patchset of dependency Changes in v6: none Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add audio support for Display Port on MSMAbhinav Kumar8-1/+935
Introduce audio support for Display Port on MSM chipsets. This change integrates DP audio sub-module with the main Display Port platform driver. In addition, this change leverages hdmi_codec_ops to expose the operations to the audio driver. Changes in v2: fix up a compilation issue on drm-next branch Changes in v3: none Changes in v4: none Changes in v5: none Changes in v6: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: store dp_display in the driver dataAbhinav Kumar1-10/+16
Store the dp_display in the platform driver data instead of the dp_display_private. This is required to allow other sub-modules to reuse the platform driver data. Changes in v3: none Changes in v4: none Changes in v5: none Changes in v6: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Add DP compliance tests on Snapdragon ChipsetsKuogee Hsieh19-457/+1050
add event thread to execute events serially from event queue. Also timeout mode is supported which allow an event be deferred to be executed at later time. Both link and phy compliant tests had been done successfully. Changes in v2: -- Fix potential deadlock by removing redundant connect_mutex -- Check and enable link clock during modeset -- Drop unused code and fix function prototypes. -- set sink power to normal operation state (D0) before DPCD read Changes in v3: -- push idle pattern at main link before timing generator off -- add timeout handles for both connect and disconnect Changes in v4: -- add ST_SUSPEND_PENDING to handles suspend/modeset test operations -- clear dp phy aux interrupt status when ERR_DPPHY_AUX error -- send segment addr during edid read -- clear bpp depth before MISC register write Changes in v5: -- add ST_SUSPENDED to fix crash at resume Changes in v6: -- at msm_dp_display_enable() do not return until resume_done to avoid kms commit timeout Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Add Display Port HPD featureTanmay Shah7-35/+182
Configure HPD registers in DP controller and enable HPD interrupt. Add interrupt to handle HPD connect and disconnect events. Changes in v8: None Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dpu: add display port support in DPUJeykumar Sankaran2-15/+58
Add display port support in DPU by creating hooks for DP encoder enumeration and encoder mode initialization. changes in v2: - rebase on [2] (Sean Paul) - remove unwanted error checks and switch cases (Jordan Crouse) [1] https://lwn.net/Articles/768265/ [2] https://lkml.org/lkml/2018/11/17/87 changes in V3: -- Moved this change as part of the DP driver changes. -- Addressed compilation issues on the latest code base. Changes in v6: -- Fix checkpatch.pl warning Changes in v7: Remove depends-on tag from commit message. Changes in v8: None Changes in v9: None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add support for DP PLL driverChandan Uddaraju14-17/+1294
Add the needed DP PLL specific files to support display port interface on msm targets. The DP driver calls the DP PLL driver registration. The DP driver sets the link and pixel clock sources. Changes in v2: -- Update copyright markings on all relevant files. -- Use DRM_DEBUG_DP for debug msgs. Changes in v4: -- Update the DP link clock provider names Changes in V5: -- Addressed comments from Stephen Boyd, Rob clark. Changes in V6: -- Remove PLL as separate driver and include PLL as DP module -- Remove redundant clock parsing from PLL module and make DP as clock provider -- Map USB3 DPCOM and PHY IO using hardcoded register address and move mapping form parser to PLL module -- Access DP PHY modules from same base address using offsets instead of deriving base address of individual module from device tree. -- Remove dp_pll_10nm_util.c and include its functionality in dp_pll_10nm.c -- Introduce new data structures private to PLL module Changes in v7: -- Remove DRM_MSM_DP_PLL config from Makefile and Kconfig -- Remove set_parent from determin_rate API -- Remove phy_pll_vco_div_clk from parent list -- Remove flag CLK_DIVIDER_ONE_BASED -- Remove redundant cell-index property parsing Changes in v8: -- Unregister hardware clocks during driver cleanup Changes in v9: -- Remove redundant Kconfig option DRM_MSM_DP_10NM_PLL Changes in v10: -- Limit 10nm PLL function scope Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add displayPort driver supportChandan Uddaraju27-3/+8061
Add the needed displayPort files to enable DP driver on msm target. "dp_display" module is the main module that calls into other sub-modules. "dp_drm" file represents the interface between DRM framework and DP driver. Changes in v12: -- Add support of pm ops in display port driver -- Clear bpp depth bits before writing to MISC register -- Fix edid read Previous Change log: https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/ Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Co-developed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: Get rid of the REG_ADRENO offsetsJordan Crouse7-234/+178
As newer GPU families are added it makes less sense to maintain a "generic" version functions for older families. Move adreno_submit() and get_rptr() into the target specific code for a2xx, a3xx and a4xx. Add a parameter to adreno_flush to pass the target specific WPTR register instead of relying on the generic register. All of this gets rid of the last of the REG_ADRENO offsets so remove all all the register definitions and infrastructure. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: a6xx: Use WHERE_AM_I for eligible targetsJordan Crouse2-3/+93
Support the WHERE_AM_I opcode for the A618, A630 and A640 GPUs if the microcode supports it. The WHERE_AM_I opcode allows the RPTR shadow to be updated in priviliged memory which protects the shadow from being read or written from user submissions. A650 already supports extended APRIV have built in hardware support for to access privilged memory from the CP and can go back to using the hardware RPTR shadow feature. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: Allow a5xx to mark the RPTR shadow as privilegedJordan Crouse7-13/+109
Newer microcode versions have support for the CP_WHERE_AM_I opcode which allows the RPTR shadow memory to be marked as privileged to protect it from corruption. Move the RPTR shadow into its own buffer and protect it it if the current microcode version supports the new feature. We can also re-enable preemption for those targets that support CP_WHERE_AM_I. Start out by preemptively assuming that we can enable preemption and disable it in a5xx_hw_init if the microcode version comes back as too old. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard21-65/+187
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic properly. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-12drm/msm: Show process names in gem_describeRob Clark6-9/+34
In $debugfs/gem we already show any vma(s) associated with an object. Also show process names if the vma's address space is a per-process address space. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm/a6xx: Add support for per-instance pagetablesJordan Crouse3-0/+64
Add support for using per-instance pagetables if all the dependencies are available. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
2020-09-12drm/msm: Add support for private address space instancesJordan Crouse5-6/+48
Add support for allocating private address space instances. Targets that support per-context pagetables should implement their own function to allocate private address spaces. The default will return a pointer to the global address space. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Add support to create a local pagetableJordan Crouse4-3/+215
Add support to create a io-pgtable for use by targets that support per-instance pagetables. In order to support per-instance pagetables the GPU SMMU device needs to have the qcom,adreno-smmu compatible string and split pagetables enabled. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Set the global virtual address range from the IOMMU domainJordan Crouse2-2/+18
Use the aperture settings from the IOMMU domain to set up the virtual address range for the GPU. This allows us to transparently deal with IOMMU side features (like split pagetables). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Drop context arg to gpu->submit()Jordan Crouse7-25/+17
Now that we can get the ctx from the submitqueue, the extra arg is redundant. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [split out of previous patch to reduce churny noise] Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Add a context pointer to the submitqueueJordan Crouse6-4/+30
Each submitqueue is attached to a context. Add a pointer to the context to the submitqueue at create time and refcount it so that it stays around through the life of the queue. Co-developed-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Set adreno_smmu as gpu's drvdataRob Clark3-4/+6
This will be populated by adreno-smmu, to provide a way for coordinating enabling/disabling TTBR0 translation. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm/gpu: Add dev_to_gpu() helperRob Clark3-9/+12
In a later patch, the drvdata will not directly be 'struct msm_gpu *', so add a helper to reduce the churn. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Remove dangling submitqueue referencesRob Clark1-1/+3
Currently it doesn't matter, since we free the ctx immediately. But when we start refcnt'ing the ctx, we don't want old dangling list entries to hang around. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm/a6xx: fix a potential overflow issueZhenzhong Duan1-1/+1
It's allocating an array of a6xx_gpu_state_obj structure rathor than its pointers. This patch fix it. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12drm/msm/adreno: fix probe without iommuLuca Weiss1-2/+8
The function iommu_domain_alloc returns NULL on platforms without IOMMU such as msm8974. This resulted in PTR_ERR(-ENODEV) being assigned to gpu->aspace so the correct code path wasn't taken. Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12drm/msm/gpu: Add suspend/resume tracepointsRob Clark3-0/+32
Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12drm/msm/dsi: add support for 7nm DSI PHY/PLLJonathan Marek10-0/+1714
This adds support for the 7nm ("V4") DSI PHY/PLL for sm8150 and sm8250. Implementation is based on 10nm driver, but updated based on the downstream 7nm driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12drm/msm/dsi: add DSI config for sm8150 and sm8250Jonathan Marek2-1/+6
This allows DSI driver to work with sm8150 and sm8250. The sdm845 config is re-used as the config is the same. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Signed-off-by: Rob Clark <robdclark@chromium.org>
Powered by cgit, Gruvboxed by Blaster4385.