aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10drm: Use state helper instead of CRTC state pointerMaxime Ripard1-6/+9
Many drivers reference the crtc->pointer in order to get the current CRTC state in their atomic_begin or atomic_flush hooks, which would be the new CRTC state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_crtc_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct tegra_dc_state *crtc_state = e; + struct tegra_dc_state *dc_state = e; <+... - crtc_state + dc_state ...+> } @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct mtk_crtc_state *crtc_state = e; + struct mtk_crtc_state *mtk_crtc_state = e; <+... - crtc_state + mtk_crtc_state ...+> } @ replaces_new_state @ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = crtc->state; + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ adds_new_state @ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ include depends on adds_new_state || replaces_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_new_state || replaces_new_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Suggested-by: Ville Syrjälä <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Cc: "James (Qian) Wang" <[email protected]> Cc: Liviu Dudau <[email protected]> Cc: Mihail Atanassov <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Russell King <[email protected]> Cc: Paul Cercueil <[email protected]> Cc: Chun-Kuang Hu <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Sandy Huang <[email protected]> Cc: "Heiko Stübner" <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Gerd Hoffmann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-8/+8
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Acked-by: Daniel Vetter <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard1-8/+14
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <[email protected]>
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+2
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-09-25drm/mediatek: reduce clear eventDennis YC Hsieh1-1/+1
No need to clear event again since event always clear before wait. This fix depend on patch: "soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api" Fixes: 2f965be7f9008 ("drm/mediatek: apply CMDQ control flow") Signed-off-by: Dennis YC Hsieh <[email protected]> Reviewed-by: Bibby Hsieh <[email protected]> Acked-by: Chun-Kuang Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2020-09-25soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe apiDennis YC Hsieh1-1/+1
Add clear parameter to let client decide if event should be clear to 0 after GCE receive it. Signed-off-by: Dennis YC Hsieh <[email protected]> Acked-by: Chun-Kuang Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mb: fix commit message] Signed-off-by: Matthias Brugger <[email protected]>
2020-09-17drm/mediatek: Use CPU when fail to get cmdq eventChun-Kuang Hu1-7/+13
Even though cmdq client is created successfully, without the cmdq event, cmdq could not work correctly, so use CPU when fail to get cmdq event. Fixes: 60fa8c13ab1a ("drm/mediatek: Move gce event property to mutex device node") Signed-off-by: Chun-Kuang Hu <[email protected]>
2020-08-05Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-12/+8
Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie1-6/+2
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <[email protected]>
2020-07-02drm/mtk: Use __drm_atomic_helper_crtc_resetDaniel Vetter1-10/+6
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Acked-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: Chun-Kuang Hu <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-27drm/mediatek: Remove debug messages for function callsEnric Balletbo i Serra1-5/+0
Equivalent information can be nowadays obtained using function tracer. Signed-off-by: Enric Balletbo i Serra <[email protected]> Reviewed-by: CK Hu <[email protected]> Signed-off-by: Chun-Kuang Hu <[email protected]>
2020-06-27drm/mediatek: Fix device passed to cmdqHsin-Yi Wang1-1/+2
drm device is now probed from mmsys. We need to use mmsys device to get gce nodes. Fix following errors: [ 0.740068] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0) [ 0.748721] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0) ... [ 2.659645] mediatek-drm mediatek-drm.1.auto: failed to request channel [ 2.666270] mediatek-drm mediatek-drm.1.auto: failed to request channel Fixes: 667c769246b0 ("soc / drm: mediatek: Fix mediatek-drm device probing") Signed-off-by: Hsin-Yi Wang <[email protected]> Reviewed-by: Enric Balletbo i Serra <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Chun-Kuang Hu <[email protected]>
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-22soc: mediatek: cmdq: export finalize functionDennis YC Hsieh1-0/+1
Export finalize function to client which helps append eoc and jump command to pkt. Let client decide call finalize or not. Signed-off-by: Dennis YC Hsieh <[email protected]> Reviewed-by: CK Hu <[email protected]> Acked-by: Chun-Kuang Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2020-05-27drm: Nuke mode->vrefreshVille Syrjälä1-2/+2
Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Jonas Karlman <[email protected]> Cc: Jernej Skrabec <[email protected]> Cc: Inki Dae <[email protected]> Cc: Joonyoung Shim <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Linus Walleij <[email protected]> Cc: CK Hu <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Jerry Han <[email protected]> Cc: Icenowy Zheng <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Stefan Mavrodiev <[email protected]> Cc: Robert Chiras <[email protected]> Cc: "Guido Günther" <[email protected]> Cc: Purism Kernel Team <[email protected]> Cc: Benjamin Gaignard <[email protected]> Cc: Vincent Abriou <[email protected]> Cc: VMware Graphics <[email protected]> Cc: Thomas Hellstrom <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-13soc / drm: mediatek: Move routing control to mmsys deviceEnric Balletbo i Serra1-9/+10
Provide a mtk_mmsys_ddp_connect() and mtk_mmsys_disconnect() functions to replace mtk_ddp_add_comp_to_path() and mtk_ddp_remove_comp_from_path(). Those functions will allow DRM driver and others to control the data path routing. Signed-off-by: Enric Balletbo i Serra <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Reviewed-by: CK Hu <[email protected]> Acked-by: CK Hu <[email protected]> Tested-by: Anders Roxell <[email protected]> Reviewed-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2020-02-18drm/mediatek: Make sure previous message done or be aborted before sendBibby Hsieh1-0/+1
Mediatek CMDQ driver removed atomic parameter and implementation related to atomic. DRM driver need to make sure previous message done or be aborted before we send next message. If previous message is still waiting for event, it means the setting hasn't been updated into display hardware register, we can abort the message and send next message to update the newest setting into display hardware. If previous message already started, we have to wait it until transmission has been completed. So we flush mbox client before we send new message to controller driver. Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-02-18drm/mediatek: Move gce event property to mutex device nodeBibby Hsieh1-1/+2
According mtk hardware design, stream_done0 and stream_done1 are generated by mutex, so we move gce event property to mutex device mode. Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-02-11drm/mediatek: Ensure the cursor plane is on top of other overlaysSean Paul1-3/+5
Currently the cursor is placed on the first overlay plane, which means it will be at the bottom of the stack when the hw does the compositing with anything other than primary plane. Since mtk doesn't support plane zpos, change the cursor location to the top-most plane. Signed-off-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-02-11drm/mediatek: Find the cursor plane instead of hard coding itEvan Benn1-6/+12
The cursor and primary planes were hard coded. Now search for them for passing to drm_crtc_init_with_planes Signed-off-by: Evan Benn <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-01-10drm/mediatek: Add ctm property supportYongqiang Niu1-4/+12
Add ctm property support Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: Hsin-Yi Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-01-10drm/mediatek: Add gamma property according to hardware capabilityYongqiang Niu1-2/+8
If there is no gamma function in the crtc display path, don't add gamma property for crtc Fixes: 2f3f4dda747c ("drm/mediatek: Add gamma correction.") Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: Hsin-Yi Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-01-09drm/mediatek: apply CMDQ control flowBibby Hsieh1-6/+55
In some Mediatek SoC, there is no "shadow" registers for performaing an atomic video mode set or page flip at vblank/vsync. The CMDQ (Commend Queue) is used to help update all relevant display controller registers with critical time limation. Signed-off-by: YT Shen <[email protected]> Signed-off-by: Philipp Zabel <[email protected]> Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: CK Hu <[email protected]>
2020-01-09drm/mediatek: support CMDQ interface in ddp componentBibby Hsieh1-5/+5
The CMDQ (Command Queue) in some Mediatek SoC is used to help update all relevant display controller registers with critical time limation. This patch add cmdq interface in ddp_comp interface, let all ddp_comp interface can support cpu/cmdq function at the same time. Signed-off-by: YT Shen <[email protected]> Signed-off-by: Philipp Zabel <[email protected]> Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-12-20drm/mediatek: disable all the planes in atomic_disableBibby Hsieh1-0/+1
Under shadow register case, we do not disable all the plane before disable all the hardwares. Fix it. Fixes: 9dc84e98a31f ("drm/mediatek: add shadow register support") Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-12-20drm/mediatek: update cursors by using async atomic updateBibby Hsieh1-21/+77
Support to async updates of cursors by using the new atomic interface for that. Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-12-20drm/mediatek: handle events when enabling/disabling crtcBibby Hsieh1-0/+8
The driver currently handles vblank events only when updating planes on an already enabled CRTC. The atomic update API however allows requesting an event when enabling or disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it. Signed-off-by: Bibby Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-12-20drm/mediatek: Fix can't get component for external display plane.Yongqiang Niu1-2/+3
The original logic is ok for primary display, but will not find out component for external display. For example, plane->index is 6 for external display, but there are only 2 layer nr in external display, and this condition will never happen: if (plane->index < (count + mtk_ddp_comp_layer_nr(comp))) Fix this by using the offset of the plane to mtk_crtc->planes as index, instead of plane->index. Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane") Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: Pi-Hsun Shih <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-12-20drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.Pi-Hsun Shih1-4/+9
The mtk_drm_ddp_comp_for_plane can return NULL, but the usage doesn't check for it. Add check for it. Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane") Signed-off-by: Pi-Hsun Shih <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-11-06drm/mediatek: Plumb supported rotation values from components to plane initSean Paul1-1/+3
This patch adds the ability for components to expose supported rotations which will be exposed to userspace via a plane rotation property. No functional changes in this patch. Signed-off-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-11-06drm/mediatek: Add plumbing for layer_check hookSean Paul1-0/+10
This allows components to implement a .layer_check callback for their layers which is called during atomic_check. Signed-off-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-11-06drm/mediatek: Add helper to get component for a planeSean Paul1-22/+34
Instead of hard-coding which components have planes, add a helper function to walk the components and map a plane index to a component layer. Signed-off-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-11-06drm/mediatek: Refactor plane initSean Paul1-18/+59
Add a couple of functions which enumerate the number of planes for a component and initialize the planes for a component. No functional changes in this patch, but it will allow us to selectively support rotation if the component supports it. Signed-off-by: Sean Paul <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-10-09drm/mediatek: add ovl0/ovl_2l0 usecaseYongqiang Niu1-3/+34
This patch add ovl0/ovl_2l0 usecase in ovl->ovl_2l0 direct link usecase: 1. the crtc support layer number will 4+2 2. ovl_2l0 background color input select ovl0 when crtc init and disable it when crtc finish 3. config ovl_2l0 layer, if crtc config layer number is bigger than ovl0 support layers(max is 4) Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-07-17drm/mediatek: drop use of drmP.hSam Ravnborg1-4/+6
Drop use of the deprecated drmP.h header file. While touching the include files divide them up in blocks in the typical order: \#include <linux/*> \#include <video/*> \#include <drm/*> \#include "" And sort the includes in the blocks Add the necessary includes to fix build after removal of drmP.h Signed-off-by: Sam Ravnborg <[email protected]> Acked-by: Emil Velikov <[email protected]> Reviewed-by: CK Hu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-12Merge branch 'mediatek-drm-fixes-5.2' of ↵Daniel Vetter1-24/+6
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes CK writes: This include unbind error fix, clock control flow refinement, and PRIME mmap with page offset. Signed-off-by: Daniel Vetter <[email protected]> From: CK Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1560325868.3259.6.camel@mtksdaap41
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-29drm/mediatek: adjust ddp clock control flowYongqiang Niu1-24/+6
display hardware clock will not unprepare when crtc is disable, until crtc is destroyed. with this patch, hard clock will disable and unprepare at the same time. Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: Hsin-Yi Wang <[email protected]> Signed-off-by: CK Hu <[email protected]>
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter1-1/+1
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Laurent Pinchart <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Acked-by: Benjamin Gaignard <[email protected]> Acked-by: Jani Nikula <[email protected]> Acked-by: Neil Armstrong <[email protected]> Acked-by: Oleksandr Andrushchenko <[email protected]> Acked-by: CK Hu <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-05treewide: Replace more open-coded allocation size multiplicationsKees Cook1-1/+1
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <[email protected]>
2018-08-27drm/mediatek: update some variable name from ovl to compStu Hsieh1-13/+13
This patch update some variable name from ovl to comp Because RDMA would be first HW in ddp, the naming ovl should be change to comp. Signed-off-by: Stu Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2018-08-27drm/mediatek: use layer_nr function to get layer number to init planeStu Hsieh1-7/+14
This patch use layer_nr function to get layer number to init plane When plane init in crtc create, it use the number of OVL layer to init plane. That's OVL can read 4 memory address. For mt2712 third ddp, it use RDMA to read memory. RDMA can read 1 memory address, so it just init one plane. For compatibility, this patch use mtk_ddp_comp_layer_nr function to get layer number from their HW component in ddp for plane init. Signed-off-by: Stu Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2018-06-24drm/mediatek: add third ddp path[email protected]1-0/+3
This patch create third crtc by third ddp path Signed-off-by: Stu Hsieh <[email protected]> Signed-off-by: CK Hu <[email protected]>
2017-07-26drm: Convert to using %pOF instead of full_nameRob Herring1-4/+3
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Sean Paul <[email protected]> Cc: Inki Dae <[email protected]> Cc: Joonyoung Shim <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Xinliang Liu <[email protected]> Cc: Rongrong Zou <[email protected]> Cc: Xinwei Kong <[email protected]> Cc: Chen Feng <[email protected]> Cc: CK Hu <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Carlo Caione <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Mark Yao <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Jyri Sarha <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Partially-Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Acked-by: Maxime Ripard <[email protected]> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]>
2017-07-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter1-0/+2
I need this to be able to apply the deferred fbdev setup patches, I need the relevant prep work that landed through the drm-intel tree. Also squash in conflict fixup from Laurent Pinchart. Signed-off-by: Daniel Vetter <[email protected]>
2017-06-30drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()Laurent Pinchart1-2/+3
The CRTC .disable() helper operation is deprecated for atomic drivers, the new .atomic_disable() helper operation being preferred. Convert all atomic drivers to .atomic_disable() to avoid cargo-cult use of .disable() in new drivers. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Maxime Ripard <[email protected]> # for sun4i Acked-by: Philipp Zabel <[email protected]> # for mediatek Acked-by: Alexey Brodkin <[email protected]> # for arcpgu Acked-by: Boris Brezillon <[email protected]> # for atmel-hlcdc Tested-by: Philippe Cornu <[email protected]> # for stm Acked-by: Philippe Cornu <[email protected]> # for stm Acked-by: Vincent Abriou <[email protected]> # for sti Reviewed-by: Thomas Hellstrom <[email protected]> # for vmwgfx Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart1-2/+3
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Maxime Ripard <[email protected]> # for sun4i Acked-by: Philipp Zabel <[email protected]> # for imx-drm and mediatek Acked-by: Alexey Brodkin <[email protected]> # for arcpgu Acked-by: Boris Brezillon <[email protected]> # for atmel-hlcdc Acked-by: Liviu Dudau <[email protected]> # for hdlcd and mali-dp Acked-by: Stefan Agner <[email protected]> # for fsl-dcu Tested-by: Philippe Cornu <[email protected]> # for stm Acked-by: Philippe Cornu <[email protected]> # for stm Acked-by: Vincent Abriou <[email protected]> # for sti Reviewed-by: Thomas Hellstrom <[email protected]> # for vmwgfx Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-27drm/mediatek: check for memory allocation failureChristophe Jaillet1-0/+2
If 'devm_kmalloc_array' returns NULL, we should return -ENOMEM as already done a few lines above instead of deferencing a NULL pointer a few lines below. Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: CK Hu <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.