| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Oleksandr Andrushchenko <[email protected]>
Acked-by: CK Hu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The imx parrallel display exposes a, well, display parallel interface.
Use the correct enum, instead of disguising the thing as a VGA connector.
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Peter Senna Tschudin <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Russell King <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: CK Hu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Cc: Jeffy Chen <[email protected]>
Cc: Tomeu Vizoso <[email protected]>
Cc: Yakir Yang <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Romain Perier <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Xinliang Liu <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Rongrong Zou <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Hai Li <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: zain wang <[email protected]>
Cc: Baoyou Xie <[email protected]>
Cc: Boris Brezillon <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Archit Taneja <[email protected]>
Tested-by: Philippe Cornu <[email protected]> (on stm)
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
The parallel panel driver should continue to work without having an
endpoint linking to an panel in DT for backwards compatibility.
With the recent switch to drm_of_find_panel_or_bridge, an absent
panel results in a failure with -ENODEV error return code. To restore
the old behaviour, ignore the -ENODEV return code.
Reported-by: Nikita Yushchenko <[email protected]>
Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge")
Tested-by: Chris Healy <[email protected]>
Cc: [email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Similar to the previous commit, convert drivers open coding OF graph
parsing to use drm_of_find_panel_or_bridge instead.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Archit Taneja <[email protected]>
Tested-by: Philipp Zabel <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
[seanpaul dropped rockchip changes since they're now obsolete]
Signed-off-by: Sean Paul <[email protected]>
|
|
Most drivers that use bridges forgot to detach them at cleanup time.
Instead of fixing them one by one, detach the bridge in the core
drm_encoder_cleanup() function.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com
|
|
Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Stefan Agner <[email protected]> # For DCU
Acked-by: Boris Brezillon <[email protected]> # For atmel-hlcdc
Acked-by: Vincent Abriou <[email protected]> # For STI
Acked-by: Maxime Ripard <[email protected]> # For sun4i
Acked-by: Xinliang Liu <[email protected]> # For hisilicon
Acked-by: Jyri Sarha <[email protected]> # For tilcdc
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
|
|
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Jyri Sarha <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Acked-by: Alexey Brodkin <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <[email protected]>
|
|
Don't leave any bridge or panel attached to a stale driver instance
when unbinding, to allow reattachment on a rebind.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Instead let drm_mode_config_cleanup() do the work when taking down
the master device. This requires all cleanup functions to be
properly hooked up to the mode object .destroy callback.
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
ipu-di driver
The 'de-active' and 'pixelclk-active' DT properties are evaluated
by of_parse_display_timing() called from of_get_drm_display_mode(),
but later lost in the conversion from videomode.flags to
drm_display_mode.flags.
Enhance of_get_drm_display_mode() to also return the bus flags in a
separate variable, so that they can be passed on to the ipu-di
driver.
Signed-off-by: Lothar Waßmann <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Add support for bridge chips connected externally to the i.MX
DISP0/DISP1 DPI interfaces.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
of_get_drm_display_mode() may fail. Check its return code and bail out
on error.
Signed-off-by: Lothar Waßmann <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
This allows the compiler to do type checking.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The internal bus configuration is imx-drm specific crtc state. Store it
in imx_crtc_state and let the encoder atomic_check callbacks determine
bus_flags, bus_format and the sync pins, possibly taking into account
the mode and the connector display info.
The custom imx_drm_encoder structure can be replaced again with
drm_encoder.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
With atomic modeset support, these callbacks are optional.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Now that we can use atomic configurations, all the legacy callbacks
of CRTCs, encoders and connectors can be switched to the atomic version.
For the imx-ldb driver, there is a clock parent setting mismatch bewteen
->enable and ->disable after the switch, so a fixup is added. For the
imx-tve driver, since the encoder's callback ->dpms is replaced by
->disable, we need to move the setting for the IPU_CLK_EN bit(in register
TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the
relevant CRTC cannot be disabled correctly with a warning on DC stop timeout.
Signed-off-by: Liu Ying <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The main task of imx encoders' ->prepare callbacks is to set bus_format,
bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named
imx_encoder to cache them. The atomic encoder callback ->disable may
replace ->prepare later, so let's remove ->prepare.
Signed-off-by: Liu Ying <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Wire up CRTCs', planes' and connectors' ->reset, ->duplicate and ->destroy state
hooks to use the default implementations from the atomic helper library.
The helpers track each DRM object state.
Signed-off-by: Liu Ying <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The 'mode_valid' flag is never set in this driver. Remove it and the
code that depends on it.
Signed-off-by: Lothar Waßmann <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
This patch allows panels to set pixel clock and data enable pin polarity
other than the default of driving data at the falling pixel clock edge
and active high display enable.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Instead of using of_graph_get_port_by_id() to get the port and then
of_get_child_by_name() to get the first endpoint, get to the endpoint
in a single step.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/[email protected]
This patch set nukes all the dummy mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)
Signed-off-by: Carlos Palminha <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/8bf274e8f6908142a9f940d3f2913e4a735e0caa.1455540137.git.palminha@synopsys.com
|
|
An encoder is associated with a connector by the DRM core as a result of
setting up a configuration. Drivers using the atomic or legacy helpers
should never set up this link, even if it is a static one.
While at it, try to catch this kind of error in the future by adding a
WARN_ON() in drm_mode_connector_attach_encoder(). Note that this doesn't
cover all the cases, since drivers could set this up after attaching.
Drivers that use the atomic helpers will get a warning later on, though,
so hopefully the two combined cover enough to help people avoid this in
the future.
Cc: Russell King <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Mark yao <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Moves a bunch of junk to .rodata from .data.
drivers/gpu/drm/imx/imxdrm.ko:
-.rodata 624
+.rodata 652
-.data 372
+.data 344
drivers/gpu/drm/imx/imx-ipuv3-crtc.ko:
-.rodata 224
+.rodata 280
-.data 184
+.data 128
drivers/gpu/drm/imx/imx-ldb.ko:
-.rodata 660
+.rodata 784
-.data 240
+.data 116
drivers/gpu/drm/imx/imx-tve.ko:
-.rodata 400
+.rodata 524
-.data 416
+.data 292
drivers/gpu/drm/imx/parallel-display.ko:
-.rodata 400
+.rodata 524
-.data 216
+.data 92
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-22-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4;
@@
drm_encoder_init(E1, E2, E3, E4
+ ,NULL
)
v2: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
panel
Similarly to commit 5e501ed7253b3 ("drm/imx: imx-ldb: allow to determine
bus format from the connected panel"), if a panel is connected to the ldb
output port via the of_graph bindings, the data mapping is determined from
the display_info.bus_format field provided by the panel instead of from the
optional interface_pix_fmt device tree property.
Reported-by: Ulrich Ölmann <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Gary Bisson <[email protected]>
|
|
The parallel-display driver used an undocumented, non-standard property
"fsl,panel" to optionally associate with a drm_panel device. This patch
fixes the driver to use the same OF graph bindings as the LDB driver
instead:
parallel-display {
compatible = "fsl,imx-parallel-display";
...
port@1 {
reg = <1>;
parallel_out: endpoint {
remote_endpoint = <&panel_in>;
};
};
};
panel {
...
port {
panel_in: endpoint {
remote-endpoint = <¶llel_out>;
};
};
};
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Gary Bisson <[email protected]>
|
|
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Emil Renner Berthing <[email protected]>
|
|
imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Emil Renner Berthing <[email protected]>
|
|
Signed-off-by: Liu Ying <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
If edid was allocated during bind, it must be freed again during unbind.
Signed-off-by: Peter Seiderer <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big staging tree pull request for 3.19-rc1.
We continued to delete more lines than were added, always a good
thing, but not at a huge rate this release, only about 70k lines
removed overall mostly from removing the horrid bcm driver.
Lots of normal staging driver cleanups and fixes all over the place,
well over a thousand of them, the shortlog shows all the horrid
details.
The "contentious" thing here is the movement of the Android binder
code out of staging into the "real" part of the kernel. This is code
that has been stable for a few years now and is working as-is in the
tens of millions of devices with no issues. Yes, the code is horrid,
and the userspace api leaves a lot to be desired, but it's not going
to change due to legacy issues that we have no control over. Because
so many devices and companies rely on this, and the code is stable,
might as well promote it out of staging.
This was all discussed at the Linux Plumbers conference, and everyone
participating agreed that this was the best way forward.
There is work happening to replace the binder code with something new
that is happening right now, but I don't expect to see the results of
that work for another year at the earliest. If that ever happens, and
Android switches over to it, I'll gladly remove this version.
As for maintainers, I'll be glad to maintain this code, I've been
doing it for the past few years with no problems. I'll send a
MAINTAINERS entry for it before 3.19-final is out, still need to talk
to the Google developers about if they are willing to help with it or
not, last I checked they were, which was good.
All of these patches have been in linux-next for a while with no
reported issues"
* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
Staging: slicoss: Fix long line issues in slicoss.c
staging: rtl8712: remove unnecessary else after return
staging: comedi: change some printk calls to pr_err
staging: rtl8723au: hal: Removed the extra semicolon
lustre: Deletion of unnecessary checks before three function calls
staging: lustre: fix sparse warnings: static function declaration
staging: lustre: fixed sparse warnings related to static declarations
staging: unisys: remove duplicate header
staging: unisys: remove unneeded structure
staging: ft1000 : replace __attribute ((__packed__) with __packed
drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
Drivers:staging:rtl8192e: Fixed checkpatch warning
Drivers:staging:clocking-wizard: Added a newline
staging: clocking-wizard: check for a valid clk_name pointer
staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
|
|
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|