aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)AuthorFilesLines
2024-06-17drm/i915/mso: using joiner is not possible with eDP MSOJani Nikula1-0/+4
It's not possible to use the joiner at the same time with eDP MSO. When a panel needs MSO, it's not optional, so MSO trumps joiner. v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville) Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training") Cc: <[email protected]> # v5.13+ Cc: Ville Syrjala <[email protected]> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668 Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]> (cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f) Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915: move comments about FSB straps to proper placeJani Nikula2-10/+9
Move the comment about FSB straps to where the relevant register is read. Suggested-by: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/8a5b6cd3db80259c30263861f1a9ff04fea2e7f0.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/cdclk: use i9xx_fsb_freq() for rawclk_freq initializationJani Nikula1-43/+3
Instead of duplicating the CLKCFG parsing, reuse i9xx_fsb_freq() to figure out rawclk_freq where applicable. Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/21511f155f1f446e066117bc6ed3165618d7afd6.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915: use i9xx_fsb_freq() for GT clock frequencyJani Nikula3-2/+4
Reuse i9xx_fsb_freq() for GT clock frequency initialization instead of depending on rawclk_freq. Note: If the init order was changed, we could use i915->fsb_freq directly. However, GT clock initialization is done in i915_driver_mmio_probe(), but intel_dram_detect() later in i915_driver_hw_probe(), with a dependency on intel_pcode_init(). Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/0678d8ec9772725b47d4fa5b14e3b3a34256d5cf.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915: extend the fsb_freq initialization to more platformsJani Nikula1-14/+41
Initialize fsb frequency for more platforms to be able to use it for GT clock and rawclk frequency initialization. Note: There's a discrepancy between existing pnv_fsb_freq() and i9xx_hrawclk() regarding CLKCFG interpretation. Presume all PNV is mobile. Default to 1333 MHz for unknown values, similar to i9xx_hrawclk(). v2: - Add MISSING_CASE() (Ville) - Default to the same frequency for both branches (Ville) Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7cd6dbd4dafb900ac1dd12be0ec096ff1d5fc6cf.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915: convert fsb_freq and mem_freq to kHzJani Nikula3-33/+34
We'll want to use fsb frequency for deriving GT clock and rawclk frequencies in the future. Increase the accuracy by converting to kHz. Do the same for mem freq to be aligned. Round the frequencies ending in 666 to 667. v2: Also handle mem_freq in gen5_rps_init() (Ville) Reviewed-by: Matt Roper <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/17fe2544b876549f63fac0f956273f5f282081b3.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/gt: remove mem freq from gt debugfsJani Nikula1-1/+0
It's a bit out of place, and only printed for VLV/CHV. Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/bbfec4c67a81d1d3de1f40484a80b7164e69df21.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/dram: rearrange mem freq initJani Nikula1-34/+25
Follow the same style in mem freq init as in fsb freq init, returning the value instead of assigning in multiple places. Reviewed-by: Matt Roper <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/f098ccdbb0c42016d5dad81e0b089bb4babe29f0.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/dram: split out pnv DDR3 detectionJani Nikula1-4/+8
Split out the PNV DDR3 detection to a distinct step instead of conflating it with mem freq detection. Reviewed-by: Matt Roper <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/c4bf9d32479ab5024e9daa37a996508f543f05e9.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/dram: separate fsb freq detection from mem freqJani Nikula1-46/+60
To simplify further changes, add separate functions for reading the fsb frequency. This ends up reading CLKCFG register twice, but it's not a big deal. Reviewed-by: Matt Roper <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7582651aa21ac2c1472111c4e81ba8fee182f80e.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/wm: clarify logging on not finding CxSR latency configJani Nikula1-12/+5
Clarify and unify the logging on not finding PNV CxSR latency config. Just let the i915->fsb_freq == 0 || i915->mem_freq == 0 case go through the table instead of checking for it separately. v2: Do not check for fsb == 0 || mem == 0 separately (Matt) Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/6333cb0675c531e971e829105f1ecfc4d71bdc6b.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/wm: rename intel_get_cxsr_latency -> pnv_get_cxsr_latencyJani Nikula1-3/+3
Clarify that the function is specific to PNV, making subsequent changes slightly easier to grasp. Reviewed-by: Matt Roper <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7d4e3c9a4220ff84af2741e5cd7bb62d1b4f2a44.1718356614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-17drm/i915/mso: using joiner is not possible with eDP MSOJani Nikula1-0/+4
It's not possible to use the joiner at the same time with eDP MSO. When a panel needs MSO, it's not optional, so MSO trumps joiner. v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville) Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training") Cc: <[email protected]> # v5.13+ Cc: Ville Syrjala <[email protected]> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668 Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]>
2024-06-15drm/i915/gt/uc: Evaluate GuC priority within locksAndi Shyti1-11/+16
The ce->guc_state.lock was made to protect guc_prio, which indicates the GuC priority level. But at the begnning of the function we perform some sanity check of guc_prio outside its protected section. Move them within the locked region. Use this occasion to expand the if statement to make it clearer. Signed-off-by: Andi Shyti <[email protected]> Cc: Matthew Brost <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-15drm/i915/gt/uc: Fix typo in commentAndi Shyti1-1/+1
Replace "dynmically" with "dynamically". Signed-off-by: Andi Shyti <[email protected]> Cc: John Harrison <[email protected]> Reviewed-by: Jonathan Cavitt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14drm/i915: Remove bogus MST check in intel_dp_has_audio()Ville Syrjälä1-4/+2
No idea what this MST checks is doing in intel_dp_has_audio(). Looks completely pointless, so get rid of it. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Utilize edp_disable_dsc from VBTVille Syrjälä3-0/+9
Disable eDP DSC usage when instructed to do so by the VBT. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Reuse intel_dp_supports_dsc() for MSTVille Syrjälä3-16/+7
intel_dp_supports_dsc() now works for MST as well, reuse it. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Use intel_dp_has_dsc() during .compute_config()Ville Syrjälä1-2/+4
Reuse intel_dp_has_dsc() during .compute_config() instead of repeating some of the checks again by hand. We'll be adding more checks to intel_dp_has_dsc() and this will make sure we cover both .mode_valid() and .compute_config() with them. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Handle MST in intel_dp_has_dsc()Ville Syrjälä3-3/+6
Utilize intel_dp_has_dsc() for MST as well. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Extract intel_dp_has_dsc()Ville Syrjälä1-2/+14
Extract a helper to check whether the source+sink combo supports DSC. That basic check is needed both during mode validation and compute config. We'll also need to add extra checks to both places, so having a single place for it is nicer. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: Drop redundant dsc_decompression_aux checkVille Syrjälä1-1/+0
If we have no dsc_decompression_aux (only possible on MST) then we won't have the dsc_dpcd caps either. So checking both is not needed. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: remove unused pipe/plane B register macrosJani Nikula1-21/+0
None of these are used. The parametrized register macros all depend on the pipe/plane A offset macros alone. Remove the unused ones. v2: Rebase Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/16d278bea466a69cdce94fd83d98dd15ce1a8c89.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-14drm/i915: relocate some DSPCNTR reg bit definitionsJani Nikula2-2/+2
Some plane B/C specific bits were left next to the unused _DSPBCNTR macro. Move them next to the DSPCNTR() macro. Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/85409fbe5073797c0dc17df43eeb25abe9ff889f.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-14drm/i915/gvt: do not use implict dev_priv in DSPSURF_TO_PIPE()Jani Nikula1-2/+2
Do not rely on having dev_priv local variable, pass it to the macro. Cc: Zhenyu Wang <[email protected]> Cc: Zhi Wang <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/2ff78ebd0dc84178f5feacee7ef2a6cb4132b9ae.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-14drm/i915/gvt: rename range variable to strideJani Nikula1-2/+2
Range is a bit odd name for what really is stride. Rename. Switch to u32 while at it. Cc: Zhenyu Wang <[email protected]> Cc: Zhi Wang <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/8b8d4acee15da07845ed1779d6856d5c3f50a132.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-14drm/i915/gvt: use proper i915_reg_t for calc_index() parametersJani Nikula1-8/+10
In order to be able to use the proper register macros instead of the underscore prefixed ones, pass i915_reg_t for the calc_index() parameters. Side note: DSPSURF is really about planes, not pipes. Fixed stride doesn't work for plane C for CHV (but that's okay for gvt). This doesn't support planes beyond C either. But all that is unrelated to the change at hand. Cc: Zhenyu Wang <[email protected]> Cc: Zhi Wang <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/282b19c44d83c96b52c261cfc7218e7e54076cba.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-14drm/i915/gvt: remove the unused end parameter from calc_index()Jani Nikula1-9/+8
All callers of calc_index() pass 0 for the end parameter. Remove it. Cc: Zhenyu Wang <[email protected]> Cc: Zhi Wang <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/aaa24a5cbcf876d3b95e0f5f6594f972a860b6bc.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-06-13drm/i915/dp: Add debugfs entry to get the link retrain disabled stateImre Deak1-0/+22
Add a connector debugfs entry showing if link retraining is disabled. Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Add debugfs entry to force link retrainImre Deak3-5/+59
Add a connector debugfs entry to force retrain an active link. This can be used to test both custom link parameters (previously forced via the force_link_rate/lane_count entries) or link train failure scenarios (previously forced via the force_link_training_failure entry). The entry will autoreset after the link-retrain is complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Add debugfs entry to force link training failureImre Deak2-2/+54
Add a connector debugfs entry to force a failure during the following 1-2 link training. The entry will auto-reset after the specified link training events are complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Add debugfs entries to get the max link rate/lane countImre Deak1-0/+44
Add connector debugfs entries to get the maximum link rate and lane count. v2: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Add debugfs entries to force the link rate/lane countImre Deak6-7/+289
Add connector debugfs entries to force the link rate/lane count to be used by a link training afterwards. These settings will be clamped to the supported, i.e. the source's and sink's common rate/lane count. After forcing the link rate/lane count reset the link training parameters and for a non-auto setting disable reducing the link parameters via the fallback logic. The former one can be used after testing link training failure scenarios - via debugfs entries added later - to reset the reduced link parameters after the test. v2: - Add the entries from intel_dp_link_training.c (Jani) - Rename the entries to i915_dp_set_link_rate/lane_count. v3: (Ville) - Rename the entries/struct fields to force_link_rate/lane_count. - Lock connection_mutex only for the required intel_dp state. Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp_mst: Enable link training fallback for MSTImre Deak2-14/+5
Reduce the link parameters after a link training failure for MST outputs, similarly to how this is done for SST. For now allow the reduction only by staying in the 8b/10b vs. 128b/132b mode. Enabling the mode switch is left for a follow-up patchset, after taking measures ensuring that the mode switch happens properly. In particular a rediscovery of the whole MST topology may be required for such a switch, see the References below. Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10970 Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp_mst: Reset intel_dp->link_trained during disablingImre Deak1-0/+3
Reset the flag indicating an active link after disabling an MST link, similarly to how this is done for SST outputs. This avoids trying to retrain an MST link while its disabled. Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Disable link retraining after the last fallback stepImre Deak3-8/+18
After a link training failure if the link parameters can't be further reduced, there is no point in trying to retrain the link in the driver. This avoids excessive retrain attempts after detecting a bad link, for instance while handling MST HPD IRQs, which is likely redundant as the link training failed already twice with the same minimum link parameters. Userspace can still try to retrain the link with these parameters via a modeset. While at it make the error message more accurate. v2: Move converting the error to a debug message to the relevant follow-up patch. (Ville) Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Use check link state work in the HPD IRQ handlerImre Deak1-4/+7
Simplify things by retraining a DP link if a bad link is detected in the HPD IRQ handler from the encoder's check link state work, similarly to how this is done after a modeset link training failure. Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Use check link state work in the detect handlerImre Deak2-9/+8
Simplify things by retraining a DP link if a bad link is detected in the connector detect handler from the encoder's check link state work, similarly to how this is done after a modeset link training failure. v2: Add TODO: comment to remove the detect-time link state check. (Ville) Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Use check link state work in the hotplug handlerImre Deak4-25/+21
Simplify things by retraining a DP link if a bad link is detected in the hotplug handler from the encoder's check link state work, similarly to how this is done after a modeset link training failure. Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Send a link training modeset-retry uevent to all MST connectorsImre Deak3-6/+18
Send a modeset-retry uevent to all connectors in the same MST topology after a link training failure and reduction of the link parameters. This matches the way the same uevent is sent after a DP tunnel BW allocation failure. v2: Add NOTE that the atomic state may not be valid for SST links and assert that it's valid for MST links. (Ville) Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Pass atomic state to link training functionImre Deak5-7/+18
The next patch adds sending a modeset-retry uevent after a link training failure to all MST connectors on link. This requires the atomic state, so pass it to intel_dp_start_link_train(). In case of SST where retraining still happens by calling this function directly instead of a modeset commit the atomic state is not available and NULL is passed instead. This is ok, since in this case the encoder's only DP connector is available from intel_dp->attached_connector not requiring the atomic state. v2: Add NOTE that the atomic state may not be valid for SST links and assert that it's valid for MST links. (Ville) Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Reduce link params only after retrying with unchanged paramsImre Deak3-0/+14
Try to maintain the current link parameters by retrying the link training with unchanged link parameters before reducing these parameters (sending an uevent to userspace to retrain the link instead). Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Recheck link state after modesetImre Deak9-5/+123
Recheck the link state after a passing link training, with a 2 sec delay to account for cases where the link goes bad following the link training and the sink doesn't report this via an HPD IRQ. The delayed work added here will be also used by a later patch after a failed link training to try to retrain the link with unchanged link params before reducing the link params. v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports). v3: - Move the helpers to a new intel_encoder.c file, rename them accordingly. (Ville) - Add the work to intel_encoder instead of intel_digital_port. - Call the encoder specific link check function via an encoder hook. - Flush the link check work during encoder destroy from intel_dp_encoder_flush_work(). - Flush the link check work during encoder suspend as well. v4: Call intel_encoder_link_check_init() with a valid encoder pointer. Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Use a commit modeset for link retraining MST linksImre Deak1-6/+19
Instead of direct calls to the link train functions, retrain the link via a commit modeset. The direct call means that the output port will be disabled/re-enabled while the rest of the pipeline (transcoder) is active, which doesn't seem to work on MST at least. It leads to underruns and black screen, presumedly because the transcoder is not disabled/re-enabled along the port. Leave switching to a commit modeset on SST for a later patchset, as that seems to work ok currently (though better to using a commit there too, due to the suppressed underruns). v2: Keep reverse line length order for local variables. (Ville) Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915: Factor out function to modeset commit a set of pipesImre Deak3-30/+38
Factor out a function to modeset commit a set of pipes, which a later patch will reuse for DP link retraining. Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Sanitize intel_dp_get_link_train_fallback_values()Imre Deak1-36/+56
Reduce the indentation in intel_dp_get_link_train_fallback_values() by adding separate helpers to reduce the link rate and lane count. Also simplify things by passing crtc_state to the function. This also prepares for later patches in the patchset adding a limitation on how the link params are reduced. While at it use lt_dbg()/lt_err() for debug/error prints in the function which will also print the connector/encoder prefix and add a debug print about reducing the link parameters. v2: - Align reduce_lane_count()'s error handling flow with reduce_link_rate(). (Ville, Jani) - Use lt_dbg()/lt_err() in the function. Cc: Jani Nikula <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Move link train fallback to intel_dp_link_training.cImre Deak3-76/+77
Move the functions used to reduce the link parameters during link training to intel_dp_link_training.c . Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Manasi Navare <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp: Move link train params to a substruct in intel_dpImre Deak2-20/+23
For clarity move the link training parameters updated during link training based on the pass/fail LT result under a substruct in intel_dp. This prepares for later patches in this patchset adding similar params here. Rename intel_dp_reset_max_link_params() to intel_dp_reset_link_params() to better reflect what state gets reset. v2: Add the parameters to a more generic link substruct. (Jani) Cc: Jani Nikula <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp_mst: Align TUs to avoid splitting symbols across MTPsImre Deak1-4/+23
Symbols consisting of multiple (4) TU timeslots may get split across MTPs when using 2 or 1 link lanes. Avoid this, as required by Bspec by aligning the allocated TUs to 2 when using 2 lanes and 4 when using 1 lane. Atm, we also have to align the PBNs used to allocate BW along the MST path, since DRM core keeps track of its own TU value, derived from the PBN and that TU value must match what the driver calculates. On some platforms the alignment is only required on 8b/10b links, a follow-up patch will remove the limitation for those. Bspec: 49266, 68922 Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13drm/i915/dp_mst: Fix DSC input BPP computationImre Deak1-0/+2
The branch or sink device decompressing a stream may have a limitation on the input/uncompressed BPP, which is lower than the base line BPP (determined by the sink's EDID). In some cases a stream with an input BPP higher than this limit will be converted automatically by the device decompressing the stream, by truncating the BPP, however in some cases - seen at least in Dell dock's DP->HDMI converters - the decompression will fail. Fix the above by limiting the input BPP correctly. This is done already correctly for SST outputs. Reviewed-by: Luca Coelho <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.