aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)AuthorFilesLines
2020-11-16drm: fix some kernel-doc markupsMauro Carvalho Chehab3-5/+7
Some identifiers have different names between their prototypes and the kernel-doc markup. Others need to be fixed, as kernel-doc markups should use this format: identifier - description Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/12d4ca26f6843618200529ce5445063734d38c04.1605521731.git.mchehab+huawei@kernel.org
2020-11-10Merge drm/drm-next into drm-misc-nextThomas Zimmermann78-1862/+4239
We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by: Thomas Zimmermann <[email protected]>
2020-11-10Merge v5.10-rc3 into drm-nextDaniel Vetter8-64/+138
We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by: Daniel Vetter <[email protected]>
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter2-3/+3
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <[email protected]> Cc: kernel test robot <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: [email protected] Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-06Merge tag 'drm-misc-next-2020-11-05' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: Cross-subsystem Changes: - arch/arm64: Describe G12b GPU as coherent - iommu: Support coherency for Mali LPAE Core Changes: - atomic: Pass full state to CRTC atomic_{check, begin, flush}(); Use atomic-state pointers - drm: Remove SCATTER_LIST_MAX_SEGMENT; Cleanups - doc: Document legacy_cursor_update better; cleanups - edid: Don't warn n EDIDs of zero - ttm: New backend allocation pool; Remove old page allocator; Rework no_retry handling; Replace flags with booleans in struct ttm_operation_ctx - vram-helper: Cleanups - fbdev: Cleanups - console: Store font size as unsigned value Driver Changes: - ast: Support new display mode - amdgpu: Switch to new TTM allocator - hisilicon: Cleanups - nouveau: Switch to new TTM allocator; Fix include of swiotbl.h and limits.h; Use state helper instead of CRTC state pointer - panfrost: Support cache-coherent integrations; Fix mutex corruption on open/close; Cleanupse - qxl: Cleanups - radeon: Switch to new TTM allocator - ticdc: Fix build failure - vmwgfx: Switch to new TTM allocator - xlnx: Use dma_request_chan - fbdev/sh_mobile: Cleanups Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20201105101641.GA13099@linux-uq9g
2020-11-05Revert "mm: introduce vma_set_file function v4"Christian König2-4/+4
The kernel test robot is not happy with that. This reverts commit 2b5b95b1ff3d70a95013a45e3b5b90f1daf42348. Signed-off-by: Christian König <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-05mm: introduce vma_set_file function v4Christian König2-4/+4
Add the new vma_set_file() function to allow changing vma->vm_file with the necessary refcount dance. v2: add more users of this. v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup, add comments why we drop the reference on two occasions. v4: make it clear that changing an anonymous vma is illegal. Signed-off-by: Christian König <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> (v2) Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-04Merge tag 'drm-intel-next-queued-2020-11-03' of ↵Dave Airlie71-1798/+4101
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11 Highlights: - More DG1 enabling (Lucas, Matt, Aditya, Anshuman, Clinton, Matt, Stuart, Venkata) - Integer scaling filter support (Pankaj Bharadiya) - Asynchronous flip support (Karthik) Generic: - Fix gen12 forcewake tables (Matt) - Haswell PCI ID updates (Alexei Podtelezhnikov) Display: - ICL+ DSI command mode enabling (Vandita) - Shutdown displays grafecully on reboot/shutdown (Ville) - Don't register display debugfs when there is no display (Lucas) - Fix RKL CDCLK table (Matt) - Limit EHL/JSL eDP to HBR2 (José) - Handle incorrectly set (by BIOS) PLLs and DP link rates at probe (Imre) - Fix mode valid check wrt bpp for "YCbCr 4:2:0 only" modes (Ville) - State checker and dump fixes (Ville) - DP AUX backlight updates (Aaron Ma, Sean Paul) - Add DP LTTPR non-transparent link training mode (Imre) - PSR2 selective fetch enabling (José) - VBT updates (José) - HDCP updates (Ramalingam) Cleanups and refactoring: - HPD pin, AUX channel, and Type-C port identifier cleanup (Ville) - Hotplug and irq refactoring (Ville) - Better DDI encoder and AUX channel names (Ville) - Color LUT code cleanups (Ville) - Combo PHY code cleanups (Ville) - LSPCON code cleanups (Ville) - Documentation fixes (Mauro, Chris) Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-04Merge tag 'drm-misc-next-2020-10-27' of ↵Dave Airlie7-26/+50
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: - doc: rules for EBUSY on non-blocking commits; requirements for fourcc modifiers; on parsing EDID - fbdev/sbuslib: Remove unused FBIOSCURSOR32 - fourcc: deprecate DRM_FORMAT_MOD_NONE - virtio: Support blob resources for memory allocations; Expose host-visible and cross-device features Cross-subsystem Changes: - devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display Optoelectronics - dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag; dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro Core Changes: - atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during non-blocking commits - dp: Prepare for DP 2.0 DPCD - dp_mst: Receive extended DPCD caps - dma-buf: Documentation - doc: Format modifiers; dma-buf-map; Cleanups - fbdev: Don't use compat_alloc_user_space(); mark as orphaned - fb-helper: Take lock in drm_fb_helper_restore_work_fb() - gem: Convert implementation and drivers to GEM object functions, remove GEM callbacks from struct drm_driver (expect gem_prime_mmap) - panel: Cleanups - pci: Add legacy infix to drm_irq_by_busid() - sched: Avoid infinite waits in drm_sched_entity_destroy() - switcheroo: Cleanups - ttm: Remove AGP support; Don't modify caching during swapout; Major refactoring of the implementation and API that affects all depending drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify() callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE; Replace caching flags with init-time cache setting; Push ttm_tt_bind() into drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy(); no more ttm_set_populated() - vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM object functions with defaults; Default placement in system memory; Cleanups Driver Changes: - amdgpu: Use GEM object functions - armada: Use GEM object functions - aspeed: Configure output via sysfs; Init struct drm_driver with - ast: Reload LUT after FB format changes - bridge: Add driver and DT bindings for anx7625; Cleanups - bridge/dw-hdmi: Constify ops - bridge/ti-sn65dsi86: Add retries for link training - bridge/lvds-codec: Add support for regulator - bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups - display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - etnaviv: Use GEM object functions - exynos: Use GEM object functions - fbdev: Cleanups and compiler fixes throughout framebuffer drivers - fbdev/cirrusfb: Avoid division by 0 - gma500: Use GEM object functions; Fix double-free of connector; Cleanups - hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups - i915: Use GEM object functions - imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups - ingenic: Reset pixel clock when parent clock changes; support reserved memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats; Revert support for cached mmap buffers on F0/F1; support 30-bit/24-bit/8-bit-palette modes - komeda: Use DEFINE_SHOW_ATTRIBUTE - mcde: Detect platform_get_irq() errors - mediatek: Use GEM object functions - msm: Use GEM object functions - nouveau: Cleanups; TTM-related changes; Use GEM object functions - omapdrm: Use GEM object functions - panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30; Cleanups - panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes() - panel/otm8009a: Allow non-continuous dsi clock; Cleanups - panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS - panfrost: Fix job timeout handling; Cleanups - pl111: Use GEM object functions - qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved() - radeon: Cleanups; TTM-related changes; Use GEM object functions - rockchip: Use GEM object functions - shmobile: Cleanups - tegra: Use GEM object functions - tidss: Set drm_plane_helper_funcs.prepare_fb - tilcdc: Don't keep vblank interrupt enabled all the time - tve200: Detect platform_get_irq() errors - vc4: Use GEM object functions; Only register components once DSI is attached; Add Maxime as maintainer - vgem: Use GEM object functions - via: Simplify critical section in via_mem_alloc() - virtgpu: Use GEM object functions - virtio: Implement blob resources, host-visible and cross-device features; Support mapping of host-allocated resources; Use UUID APi; Cleanups - vkms: Use GEM object functions; Switch to SHMEM - vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all() - xen: Use GEM object functions - xlnx: Use GEM object functions Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g
2020-11-03drm/i915: Hold onto an explicit ref to i915_vma_work.pinnedChris Wilson1-2/+4
Since __vma_release is run by a kworker after the fence has been signaled, it is no longer protected by the active reference on the vma, and so the alias of vw->pinned to vma->obj is also not protected by a reference on the object. Add an explicit reference for vw->pinned so it will always be safe. Found by inspection. Fixes: 54d7195f8c64 ("drm/i915: Unpin vma->obj on early error") Reported-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: <[email protected]> # v5.6+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bc73e5d33048b7ab5f12b11b5d923700467a8e1d) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915/gt: Flush xcs before tgl breadcrumbsChris Wilson1-1/+3
In a simple test case that writes to scratch and then busy-waits for the batch to be signaled, we observe that the signal is before the write is posted. That is bad news. Splitting the flush + write_dword into two separate flush_dw prevents the issue from being reproduced, we can presume the post-sync op is not so post-sync. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216 Testcase: igt/gem_exec_fence/parallel Testcase: igt/i915_selftest/live/gt_timelines Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: [email protected] Acked-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 09212e81e5450743e5b06b27c4e344e4c45b630d) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915/gt: Expose more parameters for emitting writes into the ringChris Wilson1-20/+35
Add another lower level to emit_ggtt_write so that the GGTT nature of the write is not hardcoded into the emitter. Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2739d8cfc50aafff49d599cc0a5bc855445e99a7) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915: Fix encoder lookup during PSR atomic checkImre Deak1-1/+1
The atomic check hooks must look up the encoder to be used with a connector from the connector's atomic state, and not assume that it's the connector's current attached encoder. The latter one can change under the atomic check func, or can be unset yet as in the case of MST connectors. This fixes [ 7.940719] Oops: 0000 [#1] SMP NOPTI [ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu [ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020 [ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper] [ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915] [ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00 [ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.990154] RSP: 0018:ffffb864c073fac8 EFLAGS: 00010202 [ 7.990155] RAX: ffff8c5d55ce0000 RBX: ffff8c5d54519000 RCX: 0000000000000000 [ 7.990155] RDX: ffff8c5d55cb30c0 RSI: ffff8c5d89a0c800 RDI: ffff8c5d55fcf800 [ 7.990156] RBP: ffffb864c073fac8 R08: 0000000000000000 R09: ffff8c5d55d9f3a0 [ 7.990156] R10: ffff8c5d55cb30c0 R11: 0000000000000009 R12: ffff8c5d55fcf800 [ 7.990156] R13: ffff8c5d55cb30c0 R14: ffff8c5d56989cc0 R15: ffff8c5d56989cc0 [ 7.990158] FS: 0000000000000000(0000) GS:ffff8c5d8e480000(0000) knlGS:0000000000000000 [ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.052970] CR2: 0000000000000078 CR3: 0000000856500005 CR4: 0000000000760ee0 [ 8.060137] PKRU: 55555554 [ 8.062867] Call Trace: [ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915] [ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915] [ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper] [ 8.083942] intel_atomic_check+0x92/0xc50 [i915] [ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm] [ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm] [ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm] [ 8.104573] drm_atomic_commit+0x18/0x50 [drm] [ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm] [ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm] [ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper] [ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper] [ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915] [ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper] [ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper] [ 8.165506] process_one_work+0x1e8/0x3b0 [ 8.169561] worker_thread+0x4d/0x400 [ 8.173249] kthread+0x104/0x140 [ 8.176515] ? process_one_work+0x3b0/0x3b0 [ 8.180726] ? kthread_park+0x90/0x90 [ 8.184416] ret_from_fork+0x1f/0x40 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486 Reported-by: William Tseng <[email protected]> Reported-by: Cooper Chiou <[email protected]> Cc: <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Anshuman Gupta <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 00e5deb5c4f5fe367311465e720e65cfa1178792) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915/gt: Use the local HWSP offset during submissionChris Wilson3-16/+31
We wrap the timeline on construction of the next request, but there may still be requests in flight that have not yet finalized the breadcrumb. (The breadcrumb is delayed as we need engine-local offsets, and for the virtual engine that is not known until execution.) As such, by the time we write to the timeline's HWSP offset it may have changed, and we should use the value we preserved in the request instead. Though the window is small and infrequent (at full flow we can expect a timeline's seqno to wrap once every 30 minutes), the impact of writing the old seqno into the new HWSP is severe: the old requests are never completed, and the new requests are completed before they are even submitted. Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: <[email protected]> # v5.2+ Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit c10f6019d0b2dc8a6a62b55459f3ada5bc4e5e1a) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915/gem: Flush coherency domains on first set-domain-ioctlChris Wilson1-15/+13
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache coherency state is inconsistent with our target domain. This also has the utility of using the population of the pages to validate the backing store. The danger in skipping the first set-domain is leaving the cache inconsistent and submitting stale data, or worse leaving the clean data in the cache and not flushing it to the GPU. The impact should be small as it requires a no-op set-domain as the very first ioctl in a particular sequence not found in typical userspace. Reported-by: Zbigniew Kempczyński <[email protected]> Fixes: 754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl") Testcase: igt/gem_mmap_offset/blt-coherency Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Zbigniew Kempczyński <[email protected]> Cc: <[email protected]> # v5.2+ Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 44c2200afcd59f441b43f27829b4003397cc495d) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-11-03drm/i915: Update DRIVER_DATE to 20201103Jani Nikula1-2/+2
Signed-off-by: Jani Nikula <[email protected]>
2020-11-02drm: Remove SCATTERLIST_MAX_SEGMENTJason Gunthorpe1-1/+1
Since commit 9a40401cfa13 ("lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values") the max_segment input to sg_alloc_table_from_pages() does not have to be any special value. The new algorithm will always create something less than what the user provides. Thus eliminate this confusing constant. - vmwgfx should use the HW capability, not mix in the OS page size for calling dma_set_max_seg_size() - i915 uses i915_sg_segment_size() both for sg_alloc_table_from_pages and for some open coded sgl construction. This doesn't change the value since rounddown(size, UINT_MAX) == SCATTERLIST_MAX_SEGMENT - drm_prime_pages_to_sg uses it as a default if max_segment is zero, UINT_MAX is fine to use directly. Cc: Gerd Hoffmann <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Thomas Hellstrom <[email protected]> Cc: Qian Cai <[email protected]> Cc: "Ursulin, Tvrtko" <[email protected]> Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard91-1806/+2735
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <[email protected]>
2020-10-30drm/i915: Reduce severity for fixing up mistaken VBT tc->legacy_portChris Wilson1-3/+3
If the VBT assigned tc->legacy_port mismatches the live_status indicator for the connector, we ignore the VBT directive and switch over to the HW setting. This is not a driver error, unless we happen to misparse the VBT or the live_status registers. However, for the system in CI where the error is only reported on 1 port out of 4, the evidence indicates the VBT is wrong. Stop flaging this as an error since the cause is beyond our control, fixup the mistake and continue on. Signed-off-by: Chris Wilson <[email protected]> Cc: Imre Deak <[email protected]> Reviewed-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Get rid of ibx_irq_pre_postinstall()Ville Syrjälä1-27/+15
ibx_irq_pre_postinstall() looks totally pointless. We can just init both SDEIMR and SDEIER at the same time before enabling the master interrupt. It's equally racy as the other order due to doing all of this from the postinstall stage with the interrupt handler already in place. That is, safe with MSI but racy with shared legacy interrupts. Fortunately we should have MSI on all ilk+. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lucas De Marchi <[email protected]>
2020-10-30drm/i915: Use GEN3_IRQ_INIT() to init south interrupts in icp+Ville Syrjälä1-6/+2
No reason not to use GEN3_IRQ_INIT() on icp+. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Enable hpd logic only for ports that are presentVille Syrjälä2-113/+206
Let's enable the hardware hpd logic only for the ports we can actually use. In theory this may save some miniscule amounts of power, and more importantly it eliminates a lot if platform specific codepaths since the generic thing can now deal with any combination of ports being present on each SKU. v2: Deal with DG1 v3: Deal with DG1 some more Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lucas De Marchi <[email protected]>
2020-10-30drm/i915: Remove per-platform IIR HPD maskingVille Syrjälä2-34/+5
We no longer unmask all HPD irqs, so we can drop the ugly per-platform HPD IIR masking. IMR will prevent unsupported bits from appearing in IIR. v2: Deal with DG1 Include "HOTPLUG" in the mask names (Lucas) v3: Fix typos in subject Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Rename 'tmp_mask'Ville Syrjälä1-10/+12
Replace this silly tmp_mask with hotplug_trigger/te_trigger where appropriate. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Don't enable hpd detection logic from irq_postinstall()Ville Syrjälä1-37/+3
No reason that I can see why we should enable the hpd detection logic already during irq postinstall phase. We don't even do this on all the platforms. We just need it before we actually enable the hotplug interrupts in .hpd_irq_setup(), and in fact we already do it there as well. Let's just eliminate the redundant early setup. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lucas De Marchi <[email protected]>
2020-10-30drm/i915: Split gen11_hpd_detection_setup() into tc vs. tbt variantsVille Syrjälä1-3/+10
No reason to stuff both type-c and tbt into the same function. Let's split this so we may more easily handle platforms that lack the tbt spefific bits. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Relocate intel_hpd_{enabled,hotplug}_irqs()Ville Syrjälä1-25/+25
Move intel_hpd_{enabled,hotplug}_irqs() closes to the beginning of the file so we can use them in more places. No functional changes. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: s/tc_port/hpd_pin/ in icp+ TC hotplug bitsVille Syrjälä2-35/+35
Parametrize the icp+ TC HPD bits using hpd_pin rather than tc_port so it's clear what kind of an animal we're dealing with. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: s/tc_port/hpd_pin/ in GEN11_{TC,TBT}_HOTPLUG()Ville Syrjälä2-42/+43
Use hpd_pin instead of tc_port in the GEN11_{TC,TBT}_HOTPLUG() to make it clear what they refer to. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: s/port/hpd_pin/ for icp+ ddi hpd bitsVille Syrjälä2-36/+36
Use hpd_pin instead of port in the parametrized ICP+ DDI HPD macros. Makes it clear what these refer to. v2: Handle DG1 Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Introduce GEN8_DE_PORT_HOTPLUG()Ville Syrjälä3-21/+21
Unify the BDW/BXT hotplug bits. BDW only has port A, but that matches BXT port A so we can shar the same macro for both. v2: Remember the gvt Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Parametrize BXT_DE_PORT_HP_DDI with hpd_pinVille Syrjälä3-18/+19
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear these have nothing to do with DDI ports or PHYs as such. The only thing that matters is the HPD pin assignment. v2: Remember the gvt Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Use AUX_CH_USBCn for the RKL VBT AUX CH setupVille Syrjälä1-2/+6
As with the VBT DVO port, RKL uses PHY based mapping for the VBT AUX CH. Adjust the code to use the new AUX_USBCn names and add a comment to explain the situation. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Pimp AUX CH namesVille Syrjälä1-3/+10
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl, AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include the full encoder name in the AUX CH name as well (as opposed to just using port_name() which wouldn't give us the right thing on tgl+). Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Introduce AUX_CH_USBCnVille Syrjälä2-3/+58
Just like with the DDIs tgl+ renamed the AUX CHs to reflect the type of the DDI. Let's add the aliasing enum values for the type-C AUX CHs. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Give DDI encoders even better namesVille Syrjälä1-2/+25
Let's pimp the DDI encoder->name to reflect what the spec calls them. Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6. Also since each encoder is really a combination of the DDI and the PHY we include the PHY name as well. ICL is a bit special since it already has the two different types of DDIs (combo or TC) but it still calls them just DDI A-F regarless of the type. For that let's add an extra "(TC)" note to remind is which type of DDI it really is. The code is darn ugly, but not sure there's much we can do about it. Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: Add PORT_TCn aliases to enum portVille Syrjälä4-26/+32
Since tgl the DDIs have been named A,B,C,TC1,TC2,TC3... Add the appropriate enum values for the TC DDIs to enum port. v2: Deal with rkl and dg1 Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915: s/PORT_TC/TC_PORT_/Ville Syrjälä5-79/+79
Make the namespacing for enum tc_port better by adding the TC_ to the actual enum values. v2: Drop the extra TC (Lucas) Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/i915/gvt: Fix mmio handler break on BXT/APL.Colin Xu1-1/+11
- Remove dup mmio handler for BXT/APL. Otherwise mmio handler will fail to init. - Add engine GPR with F_CMD_ACCESS since BXT/APL will load them via LRI. Otherwise, guest will enter failsafe mode. V2: Use RCS/BCS GPR macros instead of offset. Revise commit message. V3: Use GEN8_RING_CS_GPR macros on ring base. Reviewed-by: Zhenyu Wang <[email protected]> Signed-off-by: Colin Xu <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixesZhenyu Wang166-4300/+7011
Backmerge for 5.10-rc1 to apply one extra APL fix. Signed-off-by: Zhenyu Wang <[email protected]>
2020-10-30drm/i915/gvt: Only pin/unpin intel_context along with workloadColin Xu1-7/+8
One issue exposed after below commit with which the system will freeze at suspend after vGPU is created (no need to activate the vGPU). commit e6ba76480299 ("drm/i915: Remove i915->kernel_context") Old implementation pin the intel_context at setup_submission and unpin it at clean_submission. So after some vGPU is created, the intel_context is always pinned there although no workload using it. It will then block i915 enter suspend state. There is no need to pin it all the time. Pin/unpin it around workload lifecycle is more reasonable. After GVT enabled suspend/resume, the pinned intel_context will also get unpined when userspace put VM process into suspend state since all workloads are retired, then it's safe to unpin all intel_context for workloads created. So move the pin/unpin to create_workload and destroy_workload, while still keep the create/destroy in old place. V2: Rebase. Fixes: e6ba76480299 ("drm/i915: Remove i915->kernel_context") Reviewed-by: Zhenyu Wang <[email protected]> Signed-off-by: Colin Xu <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-29drm/i915: Reject 90/270 degree rotated initial fbsVille Syrjälä1-0/+4
We don't currently handle the initial fb readout correctly for 90/270 degree rotated scanout. Reject it. Cc: [email protected] Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]> (cherry picked from commit a40a8305a732f4ecc2186ac7ca132ba062ed770d) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-10-29drm/i915: Restore ILK-M RPS supportVille Syrjälä1-0/+1
Restore RPS for ILK-M. We lost it when an extra HAS_RPS() check appeared in intel_rps_enable(). Unfortunaltey this just makes the performance worse on my ILK because intel_ips insists on limiting the GPU freq to the minimum. If we don't do the RPS init then intel_ips will not limit the frequency for whatever reason. Either it can't get at some required information and thus makes wrong decisions, or we mess up some weights/etc. and cause it to make the wrong decisions when RPS init has been done, or the entire thing is just wrong. Would require a bunch of reverse engineering to figure out what's going on. Cc: [email protected] Cc: Chris Wilson <[email protected]> Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]> (cherry picked from commit 2bf06370bcfb0dea5655e9a5ad460c7f7dca7739) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-10-29drm/i915/region: fix max size calculationMatthew Auld3-2/+79
We are incorrectly limiting the max allocation size as per the mm max_order, which is effectively the largest power-of-two that we can fit in the region size. However, it's normal to setup the region or allocator with a non-power-of-two size(for example 3G), which we should already handle correctly, except it seems for the early too-big-check. v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which is quite different, since for that we are actually limited by the largest power-of-two that we can fit within the region size. (Chris) Fixes: b908be543e44 ("drm/i915: support creating LMEM objects") Signed-off-by: Matthew Auld <[email protected]> Cc: Chris Wilson <[email protected]> Cc: CQ Tang <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 83ebef47f8ebe320d5c5673db82f9903a4f40a69) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-10-29drm/i915: Use _MMIO_PIPE3() for ilk+ WM0_PIPE registersVille Syrjälä3-16/+12
Remove the hand rolled array of WM0_PIPE register offsets and use the standard _MMIO_PIPE3() instead. v2: Take care of gvt too Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lucas De Marchi <[email protected]>
2020-10-29drm/i915: Remove unused variable retZou Wei1-2/+1
This patch fixes below warnings reported by coccicheck ./drivers/gpu/drm/i915/i915_debugfs.c:789:5-8: Unneeded variable: "ret". Return "0" on line 1012 Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zou Wei <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-28drm/i915: Fix encoder lookup during PSR atomic checkImre Deak1-1/+1
The atomic check hooks must look up the encoder to be used with a connector from the connector's atomic state, and not assume that it's the connector's current attached encoder. The latter one can change under the atomic check func, or can be unset yet as in the case of MST connectors. This fixes [ 7.940719] Oops: 0000 [#1] SMP NOPTI [ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu [ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020 [ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper] [ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915] [ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00 [ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.990154] RSP: 0018:ffffb864c073fac8 EFLAGS: 00010202 [ 7.990155] RAX: ffff8c5d55ce0000 RBX: ffff8c5d54519000 RCX: 0000000000000000 [ 7.990155] RDX: ffff8c5d55cb30c0 RSI: ffff8c5d89a0c800 RDI: ffff8c5d55fcf800 [ 7.990156] RBP: ffffb864c073fac8 R08: 0000000000000000 R09: ffff8c5d55d9f3a0 [ 7.990156] R10: ffff8c5d55cb30c0 R11: 0000000000000009 R12: ffff8c5d55fcf800 [ 7.990156] R13: ffff8c5d55cb30c0 R14: ffff8c5d56989cc0 R15: ffff8c5d56989cc0 [ 7.990158] FS: 0000000000000000(0000) GS:ffff8c5d8e480000(0000) knlGS:0000000000000000 [ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.052970] CR2: 0000000000000078 CR3: 0000000856500005 CR4: 0000000000760ee0 [ 8.060137] PKRU: 55555554 [ 8.062867] Call Trace: [ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915] [ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915] [ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper] [ 8.083942] intel_atomic_check+0x92/0xc50 [i915] [ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm] [ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm] [ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm] [ 8.104573] drm_atomic_commit+0x18/0x50 [drm] [ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm] [ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm] [ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper] [ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper] [ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915] [ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper] [ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper] [ 8.165506] process_one_work+0x1e8/0x3b0 [ 8.169561] worker_thread+0x4d/0x400 [ 8.173249] kthread+0x104/0x140 [ 8.176515] ? process_one_work+0x3b0/0x3b0 [ 8.180726] ? kthread_park+0x90/0x90 [ 8.184416] ret_from_fork+0x1f/0x40 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486 Reported-by: William Tseng <[email protected]> Reported-by: Cooper Chiou <[email protected]> Cc: <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Anshuman Gupta <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-28drm/i915/display: remove debug message from error pathLucas De Marchi1-5/+1
First check in the function is if swsci() is supported. All the error paths are easy to figure out the reason, so remove the extra debug message: it's normal not to support swsci() e.g. in dgfx. v2: Rather than special case dgfx, just remove the debug message (from Ville) Signed-off-by: Lucas De Marchi <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-28drm/i915: Guard debugfs against invalid access without displayLucas De Marchi1-1/+2
Do not create the display debugfs files when we don't have display. Based on previous patch by José Souza. Cc: José Roberto de Souza <[email protected]> Cc: Jani Nikula <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-23drm/i915/dg1: invert HPD pinsClinton A Taylor2-0/+13
HPD pins are inverted for DG1 platform. Bspec: 49956 Cc: José Roberto de Souza <[email protected]> Cc: Matt Roper <[email protected]> Signed-off-by: Clinton A Taylor <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.