aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_dp_mst.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-09drm/i915/mst: Drop pre_pll_enable null checkJosé Roberto de Souza1-2/+1
MST is only supported in DDI ports that have this hook, so the null check can be dropped. Suggested-by: Imre Deak <[email protected]> Cc: Imre Deak <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-09drm/i915: Release DDI power well references in MST portsJosé Roberto de Souza1-0/+15
MST ports did not had the post_pll_disable() hook causing the references get in pre_pll_enable() never being released causing DDI and AUX CH being enabled all the times. v2: renamed intel_mst_post_pll_disable_dp() parameters Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Imre Deak <[email protected]> Cc: Imre Deak <[email protected]> Cc: Manasi Navare <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-07drm/i915: Fix possible race in intel_dp_add_mst_connector()Lyude Paul1-4/+4
This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-17drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul1-4/+4
Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Cc: David Airlie <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-15drm/i915: Introduce CRTC output formatShashank Sharma1-0/+1
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations. V5: - Created this separate patch to introduce and init output_format. - Initialize parameters of output_format_str respectively (Jani N). - Call it intel_output_format than crtc_output_format(Ville). - Set output format in pipe_config for every encoder (Ville). - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville) V6: Rebase V7: Fixed alignment warnings (checkpatch) V8: Another check[atch warning for alignment V9: Rebase V10: Rebase on top of DSI restructure V11: Addressed review comment from Ville - Set CRTC format for pre-HSW get_pipe_config() function too. Added Ville's R-B Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Shashank Sharma <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-09drm/i915: add a common connector type independent destroy hookJani Nikula1-13/+1
Almost all of the connector destroy functions do the same thing. The differences are in the edid, detect_edid and panel cleanups, but those are safely NULL when not initialized. Roll out a common connector destroy hook. Inspired by commit bc3213c44415 ("drm/i915: Drop the eDP check from intel_dp_connector_destroy()"). Cc: Ville Syrjala <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-09drm/i915: Fix intel_dp_mst_best_encoder()Lyude Paul1-2/+0
Currently, i915 appears to rely on blocking modesets on no-longer-present MSTB ports by simply returning NULL for ->best_encoder(), which in turn causes any new atomic commits that don't disable the CRTC to fail. This is wrong however, since we still want to allow userspace to disable CRTCs on no-longer-present MSTB ports by changing the DPMS state to off and this still requires that we retrieve an encoder. So, fix this by always returning a valid encoder regardless of the state of the MST port. Changes since v1: - Remove mst atomic helper, since this got replaced with a much simpler solution Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-09drm/i915: Skip vcpi allocation for MSTB ports that are goneLyude Paul1-9/+15
Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-09drm/i915: Don't unset intel_connector->mst_portLyude Paul1-11/+6
Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-20Merge tag 'drm-misc-next-2018-09-19' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - None Cross-subsystem Changes: - None Core Changes: - Allow drivers to disable features with per-device granularity (Ville) - Use EOPNOTSUPP when iface/feature is unsupported instead of EINVAL/errno soup (Chris) - Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn) - add quirk for LG LP140WF6-SPM1 eDP panel (Shawn) Driver Changes: - i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville) - sun4i: add support for R40 HDMI PHY (Icenowy) Cc: Ville Syrjälä <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Icenowy Zheng <[email protected]> Cc: Lee, Shawn C <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
2018-09-19drm: Change limited M/N quirk to constant N quirk.Lee, Shawn C1-3/+3
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <[email protected]> Cc: Cooper Chiou <[email protected]> Cc: Matt Atwood <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Dhinakaran Pandiyan <[email protected]> Cc: Clint Taylor <[email protected]> Tested-by: Clint Taylor <[email protected]> Signed-off-by: Lee, Shawn C <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-01drm/i915/dp_mst: Fix enabling pipe clock for all streamsImre Deak1-0/+4
commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders") inadvertently stopped enabling the pipe clock for any DP-MST stream after the first one. It also rearranged the pipe clock enabling wrt. initial MST payload allocation step (which may or may not be a problem, but it's contrary to the spec.). Fix things by making the above commit truly a non-functional change. Fixes: afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107365 Reported-by: Lyude Paul <[email protected]> Reported-by: [email protected] Tested-by: [email protected] Tested-by: Lyude Paul <[email protected]> Cc: Lyude Paul <[email protected]> Cc: [email protected] Cc: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Chris Wilson <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-26drm/i915/mst: Continue state updates even if AUX writes fail.Dhinakaran Pandiyan1-4/+1
We are too late in the enabling sequence to back out cleanly, not updating state tracking variables, like intel_dp->active_mst_links in this instance, results in incorrect behaviour further along. v2: Fixed int v/s bool comparison Cc: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Nathan Ciobanu <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107281 Signed-off-by: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Nathan Ciobanu <[email protected]> Tested-by: Nathan Ciobanu <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-23Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi1-13/+2
We need a backmerge to get DP_DPCD_REV_14 before we push other i915 changes to dinq that could break compilation. Signed-off-by: Rodrigo Vivi <[email protected]>
2018-07-20drm/i915: Remove unused "ret" variable.Rodrigo Vivi1-3/+2
Just a small clean-up with no functional change, only removing a variable that is never actually used. Cc: Dhinakaran Pandiyan <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: <[email protected]> Reviewed-by: Nathan Ciobanu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-20Merge tag 'drm-misc-next-2018-07-18' of ↵Dave Airlie1-3/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Core Changes: - add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil) - more doc updates (Daniel Vetter) - fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder) - dma-buf: correctly place BUG_ON (Michel Dänzer) Driver Changes: - more vkms support(Rodrigo Siqueira) - many fixes and small improments to all drivers Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
2018-07-19Merge tag 'drm-intel-next-2018-07-09' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-next Higlights here goes to many PSR fixes and improvements; to the Ice lake work with power well support and begin of DSI support addition. Also there were many improvements on execlists and interrupts for minimal latency on command submission; and many fixes on selftests, mostly caught by our CI. General driver: - Clean-up on aux irq (Lucas) - Mark expected switch fall-through for dealing with static analysis tools (Gustavo) Gem: - Different fixes for GuC (Chris, Anusha, Michal) - Avoid self-relocation BIAS if no relocation (Chris) - Improve debugging cases in on EINVAL return and vma allocation (Chris) - Fixes and improvements on context destroying and freeing (Chris) - Wait for engines to idle before retiring (Chris) - Many improvements on execlists and interrupts for minimal latency on command submission (Chris) - Many fixes in selftests, specially on cases highlighted on CI (Chris) - Other fixes and improvements around GGTT (Chris) - Prevent background reaping of active objects (Chris) Display: - Parallel modeset cleanup to fix driver reset (Chris) - Get AUX power domain for DP main link (Imre) - Clean-up on PSR unused func pointers (Rodrigo) - Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun) - Add a PSR1 live status (Vathsala) - Replace old drm_*_{un/reference} with put,get functions (Thomas) - FBC fixes (Maarten) - Abstract and document the usage of picking macros (Jani) - Remove unnecessary check for unsupported modifiers for NV12. (DK) - Interrupt fixes for display (Ville) - Clean up on sdvo code (Ville) - Clean up on current DSI code (Jani) - Remove support for legacy debugfs crc interface (Maarten) - Simplify get_encoder_power_domains (Imre) Icelake: - MG PLL fixes (Imre) - Add hw workaround for alpha blending (Vandita) - Add power well support (Imre) - Add Interrupt Support (Anusha) - Start to add support for DSI on Ice Lake (Madhav) Signed-off-by: Dave Airlie <[email protected]> # gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <[email protected]>" # gpg: aka "Rodrigo Vivi <[email protected]>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-13drm: drop _mode_ from remaining connector functionsDaniel Vetter1-1/+1
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter1-2/+1
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-05drm/i915: Nuke intel_mst_best_encoder()Ville Syrjälä1-10/+0
With the fb-helper no longer relying on the non-atomic .best_encoder() we can eliminate the hook from the MST encoder. Cc: Daniel Vetter <[email protected]> Cc: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-06-28drm/i915: Replace drm_connector_{un/reference} with put,get functionsThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_connector. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-06-13drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSIVille Syrjälä1-0/+6
When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: [email protected] Cc: Vito Caputo <[email protected]> Reported-by: Vito Caputo <[email protected]> Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804 Tested-by: Arkadiusz Miskiewicz <[email protected]>
2018-04-07drm/i915/dp: Send DPCD ON for MST before phy_upLyude Paul1-1/+7
When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Tested-by: Laura Abbott <[email protected]> Cc: [email protected] Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-09drm/i915: Nuke intel_digital_port->portVille Syrjälä1-3/+3
Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Dhinakaran Pandiyan <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-31drm/i915: Pass around crtc and connector states for audioVille Syrjälä1-1/+2
Explicitly pass the crtc and connector states into the audio code enable/disable hooks, and plumb them all the way down. This gets rid of almost all crtc->config and encoder->crtc uses. The one place where we still use them is i915_audio_component_sync_audio_rate() since that gets called from the audio driver and we don't have explicit states around then. Cc: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2017-10-30drm/i915: Use intel_ddi_get_config() for MSTVille Syrjälä1-49/+1
Eliminate the partially duplicated DDI readout code from MST, and instead just call intel_ddi_get_config(). As a nice bonus we get more cross checking as intel_ddi_get_config() will populate output_types based on the actual mode of the DDI port. Additonally intel_ddi_get_config() must be changed to get the crtc from the passed in crtc state rather than from the encoder->crtc link. encoder->crtc really shouldn't be used anyway. v2: Rebased on BXT MST latency_optim fix Make intel_ddi_clock_get() static Cc: Maarten Lankhorst <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]>
2017-10-30drm/i915: Pass a crtc state to ddi post_disable from MST codeVille Syrjälä1-3/+3
Pass an old crtc state to intel_ddi_post_disable() from the MST code. Note that this crtc state won't necessaitly match the one that was passed to intel_ddi_pre_enable() if the first stream to be enabled isn't the last stream to be disabled. But this is fine since the states should be identical in every important way. This does mean people frobbing the DDI pre_enable/post_disable hooks have to pay attention in what parts of the state they consult. The alternative would be to inline the relevant code into the MST code. That is actually what we used to do for pre_enable before commit e081c8463ac9 ("drm/i915: Remove duplicate DDI enabling logic from MST path"). For post_disable we've always called the DDI hook. v2: Pimp up the comments explaining the MST issues Cc: Maarten Lankhorst <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]>
2017-10-30drm/i915: Populate output_types from .get_config()Ville Syrjälä1-0/+2
Rather than having the caller of .get_config() set output_types based on encoder->type, let's just have .get_config() itself populate output_types. This way we are isolated from encoder->type, which won't be useable for this purpose anyway soon (at least for DDI encoders). Cc: Maarten Lankhorst <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]>
2017-10-27drm/i915: Fix BXT lane latency optimal setting with MSTVille Syrjälä1-0/+23
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets the correct lane latency optimal setting applied. And we obviously need to compute the correct value, and read it out to keep the state checker happy. While at it drop the useless 'encoder' parameter to bxt_ddi_phy_calc_lane_lat_optim_mask() Cc: Maarten Lankhorst <[email protected]> Cc: Imre Deak <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]>
2017-10-25drm/i915: Adjust system agent voltage on CNL if required by DDI portsVille Syrjälä1-0/+5
On CNL we may need to bump up the system agent voltage not only due to CDCLK but also when driving DDI port with a sufficiently high clock. To that end start tracking the minimum acceptable voltage for each crtc. We do the tracking via crtcs because we don't have any kind of encoder state. Also there's no downside to doing it this way, and it matches how we track cdclk requirements on account of pixel rate. v2: Allow disabled crtcs to use the min voltage Add IS_CNL check to intel_ddi_compute_min_voltage() since we're using CNL specific values there s/intel_compute_min_voltage/cnl_compute_min_voltage/ since the function makes hw specific assumptions about the voltage values v3: Drop the test hack leftovers from skl_modeset_calc_cdclk() v4: s/voltage/voltage_level/ (Rodrigo) Replace DPLL DVFS FIXMEs with an explanation why we don't do anything there (Rodrigo) Cc: Mika Kahola <[email protected]> Cc: Manasi Navare <[email protected]> Cc: Rodrigo Vivi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-17drm/i915: Handle drm-layer errors in intel_dp_add_mst_connectorJames Ausmus1-4/+23
Make intel_dp_add_mst_connector handle error returns from the drm_ calls. Add intel_connector_free to support cleanup on the error path. v2: Rename new function to avoid confusion, and simplify error paths (Ville) v3: Indentation fixup, style fixes (Ville) v4: Clarify usage of intel_connector_free, and fix usage of intel_connector_free v5: Rebase Cc: Ville Syrjälä <[email protected]> Signed-off-by: James Ausmus <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm/i915: Get rid of hardcoded pipesMika Kahola1-6/+8
Favor for_each_pipe() macro when looping through pipes. Signed-off-by: Mika Kahola <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Ville Syrjälä <[email protected]>
2017-10-05drm/i915/mst: Use MST sideband message transactions for dpms controlDhinakaran Pandiyan1-2/+8
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me. $ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto v2: Modify and document the dpms and port disable order (Ville) Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten) v3 by Jani: rebase References: https://bugs.freedesktop.org/show_bug.cgi?id=90963 References: https://bugs.freedesktop.org/show_bug.cgi?id=88124 Cc: Ville Syrjälä <[email protected]> Cc: Lyude <[email protected]> Cc: Maarten Lankhorst <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Signed-off-by: Dhinakaran Pandiyan <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-09-25drm/i915/mst: Print active mst links after updatePandiyan, Dhinakaran1-5/+4
Both mst_disable_dp and mst_post_disable_dp print number of active links before the variable has been updated. Move the print statement in mst_disable_dp after the decrement so that the printed values indicate the disabing of a mst connector. Also, add some text to clarify what we are printing. Signed-off-by: Dhinakaran Pandiyan <[email protected]> Reviewed-by: James Ausmus <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-09-25drm/i915/mst: Debug log connector name in destroy_connector()Pandiyan, Dhinakaran1-1/+1
Print connector name in destroy_connect() and this doesn't add any extra lines to dmesg. The debug macro has been moved before the unregister call so that we don't lose the connector name and id. Signed-off-by: Dhinakaran Pandiyan <[email protected]> Reviewed-by: James Ausmus <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-22drm/i915: Constify states passed to enable/disable/etc. encoder hooksVille Syrjälä1-8/+8
The enable/disable/etc. encoder hooks aren't supposed to alter the state(s), so pass them as const. Unfortunately C lacks any kind of deep const thingy, so this can't catch all abuses. But at least it acts as a hint to the reader telling them not to mess about with the state(s). v2: Update intel_tv_mode_find() and ironlake_edp_pll_on() as well v3: Deal with intel_sdvo_connector_state Acked-by: Rodrigo Vivi <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-10drm/i915: Avoid null dereference if mst_port is unset.Rodrigo Vivi1-0/+3
I'm not sure if this is really the case and I don't believe this is the real fix for the bug mentioned here, but since I don't see a reliable path when mst_port is set and when mode_valid is requested I believe it is worth to have this protection here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102022 Cc: Elizabeth <[email protected]> Cc: Stefan Assmann <[email protected]> Cc: Dhinakaran Pandiyan <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <[email protected]> Cc: Archit Taneja <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Peter Senna Tschudin <[email protected]> Cc: Martin Donnelly <[email protected]> Cc: Martyn Welch <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Sean Paul <[email protected]> Cc: David Airlie <[email protected]> Cc: Inki Dae <[email protected]> Cc: Joonyoung Shim <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Cc: Russell King <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: CK Hu <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Carlo Caione <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Mark Yao <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Benjamin Gaignard <[email protected]> Cc: Vincent Abriou <[email protected]> Cc: Yannick Fertre <[email protected]> Cc: Philippe Cornu <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: Jyri Sarha <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: Shawn Guo <[email protected]> Cc: John Stultz <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Sergei Shtylyov <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Tomeu Vizoso <[email protected]> Cc: Yakir Yang <[email protected]> Cc: Marek Szyprowski <[email protected]> Cc: Jose Abreu <[email protected]> Cc: Romain Perier <[email protected]> Cc: Kieran Bingham <[email protected]> Cc: Xinliang Liu <[email protected]> Cc: Alexey Brodkin <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Rongrong Zou <[email protected]> Cc: Rob Clark <[email protected]> Cc: Hai Li <[email protected]> Cc: "Noralf Trønnes" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: zain wang <[email protected]> Cc: Baoyou Xie <[email protected]> Cc: Boris Brezillon <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Neil Armstrong <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Philipp Zabel <[email protected]> Acked-by: Archit Taneja <[email protected]> Tested-by: Philippe Cornu <[email protected]> (on stm) Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Shawn Guo <[email protected]> Acked-by: Shawn Guo <[email protected]> Acked-by: Noralf Trønnes <[email protected]> Acked-by: Vincent Abriou <[email protected]>
2017-08-08drm: Nuke drm_atomic_helper_connector_set_propertyDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by: Daniel Vetter <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Sean Paul <[email protected]> Cc: David Airlie <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Benjamin Gaignard <[email protected]> Cc: Vincent Abriou <[email protected]> Cc: Eric Anholt <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Vincent Abriou <[email protected]>
2017-07-06drm/i915: Drop FBDEV #ifdev in mst codeDaniel Vetter1-28/+10
Since commit a03fdcb1863297481a4b817c2a759cafcbdfa0ae Author: Archit Taneja <[email protected]> Date: Wed Aug 5 12:28:57 2015 +0530 drm: Add top level Kconfig option for DRM fbdev emulation this is properly handled using dummy functions. This essentially undoes commit 7296c849bf2eca2bd7d34a4686a53e3089150ac1 Author: Chris Wilson <[email protected]> Date: Tue Jul 22 20:10:28 2014 +1000 drm/i915: fix build without fbde v2: We also need to drop the #ifdef from headers. Seems like a small price to pay for slightly cleaner code. Cc: Chris Wilson <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-07-06drm/fb-helper: Push down modeset lock into FB helpersThierry Reding1-6/+3
Move the modeset locking from drivers into FB helpers. v2: Also handle intel_connector_add_to_fbdev. v3: Prevent race in intel_dp_mst with ->detect (Maarten) Cc: Maarten Lankhorst <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Tested-by: John Stultz <[email protected]> Signed-off-by: Thierry Reding <[email protected]> (v1) Reviewed-by: Maarten Lankhorst <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-16BackMerge tag 'v4.12-rc5' into drm-nextDave Airlie1-1/+4
Linux 4.12-rc5 for nouveau fixes
2017-05-30Merge tag 'drm-intel-next-2017-05-29' of ↵Dave Airlie1-13/+4
git://anongit.freedesktop.org/git/drm-intel into drm-next More stuff for 4.13: - skl+ wm fixes from Mahesh Kumar - some refactor and tests for i915_sw_fence (Chris) - tune execlist/scheduler code (Chris) - g4x,g33 gpu reset improvements (Chris, Mika) - guc code cleanup (Michal Wajdeczko, Michał Winiarski) - dp aux backlight improvements (Puthikorn Voravootivat) - buffer based guc/host communication (Michal Wajdeczko) * tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits) drm/i915: Update DRIVER_DATE to 20170529 drm/i915: Keep the forcewake timer alive for 1ms past the most recent use drm/i915/guc: capture GuC logs if FW fails to load drm/i915/guc: Introduce buffer based cmd transport drm/i915/guc: Disable send function on fini drm: Add definition for eDP backlight frequency drm/i915: Drop AUX backlight enable check for backlight control drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU drm/i915: Only GGTT vma may be pinned and prevent shrinking drm/i915: Serialize GTT/Aperture accesses on BXT drm/i915: Convert i915_gem_object_ops->flags values to use BIT() drm/i915/selftests: Silence compiler warning in igt_ctx_exec drm/i915/guc: Skip port assign on first iteration of GuC dequeue drm/i915: Remove misleading comment in request_alloc drm/i915/g33: Improve reset reliability Revert "drm/i915: Restore lost "Initialized i915" welcome message" drm/i915/huc: Update GLK HuC version drm/i915: Check for allocation failure drm/i915/guc: Remove action status and statistics from debugfs drm/i915/g4x: Improve gpu reset reliability ...
2017-05-29drm/i915: Detect USB-C specific dongles before reducing M and NJani Nikula1-1/+4
The Analogix 7737 DP to HDMI converter requires reduced M and N values when to operate correctly at HBR2. We tried to reduce the M/N values for all devices in commit 9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters"), but that regressed some other sinks. Detect this IC by its OUI value of 0x0022B9 via the DPCD quirk list, and only reduce the M/N values for that. v2 by Jani: Rebased on the DP quirk database v3 by Jani: Rebased on the reworked DP quirk database v4 by Jani: Improve commit message (Daniel) Fixes: 9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100755 Cc: Jani Nikula <[email protected]> Cc: Dhinakaran Pandiyan <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Clint Taylor <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/2d2e30f8f47d3f28c9b74ca2612336a54585c3ec.1495105635.git.jani.nikula@intel.com
2017-05-04drm/i915: Track MST link bandwidthPandiyan, Dhinakaran1-6/+42
Use the added helpers to track MST link bandwidth for atomic modesets. Link bw is acquired in the ->atomic_check() phase when CRTCs are being enabled with drm_atomic_find_vcpi_slots(). Similarly, link bw is released during ->atomic_check() with the connector helper callback ->atomic_check() when CRTCs are disabled. v6: active_changed does not alter vcpi allocations (Maarten) v5: Implement connector->atomic_check() in place of atomic_release() v4: Return an int from intel_dp_mst_atomic_release() (Maarten) v3: Handled the case where ->atomic_release() is called more than once during an atomic_check() for the same state. v2: Squashed atomic_release() implementation and caller (Daniel) Fixed logic for connector-crtc switching case (Daniel) Fixed logic for suspend-resume case. Cc: Daniel Vetter <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Archit Taneja <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Harry Wentland <[email protected]> Acked-by: Harry Wentland <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Signed-off-by: Dhinakaran Pandiyan <[email protected]> Signed-off-by: Maarten Lankhorst <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-04-12drm/i915: Convert intel_dp_mst connector properties to atomic.Maarten Lankhorst1-10/+1
MST doesn't support setting any properties, but it should still use the atomic helper for setting properties. Only path and tile properties are supported (read-only). Those are immutable, and handled by drm core. Signed-off-by: Maarten Lankhorst <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-4-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <[email protected]>
2017-04-12drm/i915: Remove unused dp properties for dp-mst.Maarten Lankhorst1-1/+0
Those properties are not hooked up on MST and were ignored. Best not expose them at all. Without this the next patch fails to start on X.org, because the DP-MST properties could not be read. Signed-off-by: Maarten Lankhorst <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Testcase: kms_properties Reviewed-by: Daniel Vetter <[email protected]>
2017-04-12Merge airlied/drm-next into drm-intel-next-queuedDaniel Vetter1-2/+2
Maarten needs both the new connector->atomic_check hook and the connection_mutex locking changes in the probe helpers to be able to start merging the connector property conversion to atomic. Signed-off-by: Daniel Vetter <[email protected]>
2017-04-11drm/i915/mst: use max link not sink lane countJani Nikula1-2/+2
The source might not support as many lanes as the sink, or the link training might have failed at higher lane counts. Take these into account. Cc: Dhinakaran Pandiyan <[email protected]> Cc: Manasi Navare <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Manasi Navare <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/cf59530acafaf9258fb643d321ad251b44f34e29.1491485983.git.jani.nikula@intel.com
2017-03-23Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux into ↵Daniel Vetter1-25/+12
drm-misc-next Resync with drm-next, I have a patch which currently can't be applied because drm-misc-next lacked the latest drm/i915 code. Signed-off-by: Daniel Vetter <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.