| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For multi-tile setups the GSC operational only on the tile 0.
Skip GSC auxiliary device creation for all other tiles
in GSC device init code.
Initialize basic GSC fields and use the same path
as HECI1 (HECI_PXP) device disable.
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121092449.328674-1-alexander.usyskin@intel.com
|
|
Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.
The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.
Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.
Here's an example of the boot timing, captured with some logs added to
i915:
[ 17.908307] [drm] adding GSC device
[ 17.915717] [drm] i915 probe done
[ 22.282917] [drm] mei-gsc bound
[ 22.938153] [drm] HuC authenticated
Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.
The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.
v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com
|
|
The inline function has no place in i915_drv.h. Move it away, un-inline,
and untangle some header dependencies while at it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914163514.1837467-1-jani.nikula@intel.com
|
|
GSC requires more operational memory than available on chip.
Reserve 4M of LMEM for GSC operation. The memory is provided to the
GSC as struct resource to the auxiliary data of the child device.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907215113.1596567-16-tomas.winkler@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Define GSC on XeHP SDV (Intel(R) dGPU without display)
XeHP SDV uses the same hardware settings as DG1, but uses polling
instead of interrupts and runs the firmware in slow pace due to
hardware limitations.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907215113.1596567-6-tomas.winkler@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add slow_firmware flag to the gsc device definition
and pass it to mei auxiliary device, this instructs
the driver to use longer operation timeouts.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907215113.1596567-5-tomas.winkler@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Some platforms require the host to poll on the
GSC registers instead of relaying on the interrupts.
For those platforms, irq initialization should be skipped
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907215113.1596567-2-tomas.winkler@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
DG2 uses different GSC offsets on memory bar
and uses PXP head (HECI1).
v2 (Daniele): Rebased to before the ATS patches
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-7-daniele.ceraolospurio@intel.com
|
|
GSC is a graphics system controller, it provides
a chassis controller for graphics discrete cards.
There are two MEI interfaces in GSC: HECI1 and HECI2.
Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000.
GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled
via bit 15 and HECI2 via bit 14 in the interrupt register.
This patch exports GSC as auxiliary device for mei driver to bind to
for HECI2 interface and prepares for HECI1 interface as
it will follow up soon.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-2-daniele.ceraolospurio@intel.com
|