aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_sdvo.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-15drm/i915: Reduce INTEL_DISPLAY_ENABLED to just treat outputs as disconnectedVille Syrjälä1-1/+5
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED return false we have to be capable of shutting it down cleanly so as to not anger the hw. To that end let's reduce the effect of !INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected. Should prevent anyone from automagically enabling any of them, while still allowing us to cleanly shut them down. v2: Put the check into the right place for CRT Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-6/+6
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-07-09drm/i915/sdvo: Make .get_modes() return the number of modesVille Syrjälä1-23/+33
.get_modes() is supposed to return the number of modes added to the probed_modes list (not that anyone actually checks for anything except zero vs. not zero). Let's do that. Also switch over to using intel_connector_update_modes() instead of hand rolling it. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]>
2020-07-09drm/i915/sdvo: Make SDVO deal with HDMI pixel repeatVille Syrjälä1-4/+23
With SDVO the pipe config pixel_multiplier only concerns itself with the data on the SDVO bus. Any HDMI specific pixel repeat must be handled by the SDVO device itself. To do that simply configure the SDVO pixel replication factor appropriately. We already set up the infoframe PRB values correctly via the infoframe helpers. There is no cap we can check for this. The spec says that 1X,2X,4X are mandatory, anything else is optional. 1X and 2X are all we need so we should be able to assume they work. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]>
2020-07-09drm/i915/sdvo: Implement limited color range for SDVO HDMI properlyVille Syrjälä1-23/+39
The SDVO/HDMI port register limited color range bit can only be used with TMDS encoding and not SDVO encoding, ie. to be used only when using the port as a HDMI port as opposed to a SDVO port. The SDVO spec does have a note that some GMCHs might allow that, but gen4 bspec vehemently disagrees. I suppose on ILK+ it might work since the color range handling is on the CPU side rather than on the PCH side, so there is no clear linkage between the TMDS vs. SDVO encoding and color range. Alas, I have no hardware to test that theory. To implement limited color range support for SDVO->HDMI we need to ask the SDVO device to do the range compression. Do so, but first check if the device even supports the colorimetry selection. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]>
2020-05-19drm/i915/display/sdvo: Prefer drm_WARN* over WARN*Pankaj Bharadiya1-7/+14
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN* over WARN* calls. changes since v1: - Added dev_priv local variable and used it in drm_WARN* calls (Jani) Signed-off-by: Pankaj Bharadiya <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-06drm/i915: Add a retry counter for hotplug detect retriesImre Deak1-3/+2
On TypeC connectors we need to retry the detection after hotplug events for a longer time, so add a retry counter to support this. The next patch will add detection retries on TypeC ports needing this. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-03drm/i915: Pass atomic state to encoder hooksVille Syrjälä1-6/+11
We're going to want access to the atomic state for iterating the slave crtcs when enabling the port sync master crtc. Pass the atomic state all the way down. The alternative would be yet another encoder hook which we'll have to call after all the normal modeset stuff is done. Not really a fan of yet another hook just for this. Note that during readout state sanitation we are now going to pass NULL as the atomic state since we don't have one. We need to change that and then we can also s/crtc_state/crtc/ and s/conn_state/conn/ for the encoder hooks as well. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: José Roberto de Souza <[email protected]>
2020-02-27drm/i915: significantly reduce the use of <drm/i915_drm.h>Jani Nikula1-1/+0
The #include has been splattered all over the place, but there are precious few places, all .c files, that actually need it. v2: remove leftover double newlines Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-20drm/i915: Mark all HPD capabled connectors as suchVille Syrjälä1-0/+1
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT} bits in intel_connector->polled (the base setting), leading to some confusing looking code to reset drm_connector->polled (the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd capable connectors, and then we don't need so many special cases in the hotplug code. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2020-02-04drm/i915/sdvo: automatic conversion to drm_device based logging macros.Wambui Karuga1-12/+17
Converts instances of the printk based drm logging macros to the new struct drm_device based logging macros in i915/display/intel_sdvo.c This was done automatically using the following coccinelle script that matches based on the existence of a drm_i915_private device pointer: @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Checkpatch warnings were fixed manually. Signed-off-by: Wambui Karuga <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-04drm/i915/display/sdvo: Make WARN* drm specific where drm_priv ptr is availablePankaj Bharadiya1-6/+8
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. @rule1@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule2@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-27drm/i915/sdvo: use intel_de_*() functions for register accessJani Nikula1-15/+15
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by: Chris Wilson <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Acked-by: Joonas Lahtinen <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b21dbc3c0f349345619590893c8ab96828c39103.1579871655.git.jani.nikula@intel.com
2020-01-20drm/i915/sdvo: Consolidate SDVO HDMI force_dvi handlingVille Syrjälä1-5/+15
Move the force_dvi check to a single function that can be called from both mode validation and compute_config(). Note that currently we don't call it from mode validation, but that will change soon. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2020-01-20drm/i915/sdvo: Reduce the size of the on stack buffersVille Syrjälä1-11/+8
The strings we want to print to the on stack buffers should be no more than 8 * 3 + strlen("(GET_SCALED_HDTV_RESOLUTION_SUPPORT)") + 1 = 61 bytes. So let's shrink the buffers down to 64 bytes. Also switch the BUG_ON()s to WARN_ON()s if I made a mistake in my arithmentic. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2020-01-13drm/i915: Pass intel_connector to intel_attached_*()Ville Syrjälä1-11/+11
Life is usually easier when we pass around intel_ types instead of drm_ types. In this case it might not be, but I think being consistent is a good thing anyway. Also some of this might get cleaned up a bit more later as we keep propagating the intel_ types further. @find@ identifier F =~ "^intel_attached_.*"; identifier C; @@ F(struct drm_connector *C) { ... } @@ identifier find.F; identifier find.C; @@ F( - struct drm_connector *C + struct intel_connector *connector ) { <... - C + &connector->base ...> } @@ identifier find.F; expression C; @@ - F(C) + F(to_intel_connector(C)) @@ expression C; @@ - to_intel_connector(&C->base) + C Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Mika Kahola <[email protected]>
2019-11-14drm/i915: Drop redundant aspec ratio prop value initializationVille Syrjälä1-1/+0
HDMI_PICTURE_ASPECT_NONE is zero and the connector state is kzalloc()'d so no need to initialize conn_state->picture_aspect_ratio with it. Cc: Ilia Mirkin <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Uma Shankar <[email protected]>
2019-11-14drm/i915: Do not override mode's aspect ratio with the prop value NONEVille Syrjälä1-3/+3
HDMI_PICTURE_ASPECT_NONE means "Automatic" so when the user has that selected we should keep whatever aspect ratio the mode already has. Also no point in checking for connector->is_hdmi in the SDVO code since we only attach the property to HDMI connectors. Cc: Ilia Mirkin <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Uma Shankar <[email protected]>
2019-11-01drm/i915: Perform automated conversions for crtc uapi/hw split, base -> uapi.Maarten Lankhorst1-3/+3
Split up crtc_state->base to uapi. This is done using the following patch, ran after the previous commit that splits out any hw references: @@ struct intel_crtc_state *T; @@ -T->base +T->uapi Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-01drm/i915: Perform automated conversions for crtc uapi/hw split, base -> hw.Maarten Lankhorst1-8/+8
Split up crtc_state->base to hw where appropriate. This is done using the following patch: @@ struct intel_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -T->base.x +T->hw.x @@ struct drm_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -to_intel_crtc_state(T)->base.x +to_intel_crtc_state(T)->hw.x Signed-off-by: Maarten Lankhorst <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-31drm/i915: Simplify pipe_mask setup even furtherVille Syrjälä1-1/+1
Just set pipe_mask=~0 for the non-special cases where any pipe will do. intel_encoder_possible_crtcs() will anyway drop out anything that doesn't exist. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Juha-Pekka Heikkila <[email protected]>
2019-10-31drm/i915: s/crtc_mask/pipe_mask/Ville Syrjälä1-1/+1
Rename the encoder->crtc_mask to encoder->pipe_mask to better reflect what it actually contains. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lucas De Marchi <[email protected]>
2019-10-02drm/i915: Clean up encoder->crtc_mask setupVille Syrjälä1-1/+1
Use BIT(pipe) for better legibility when populating the crtc_mask for encoders. Also remove the redundant possible_crtcs setup for the TV encoder. Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-07drm/i915: rename intel_drv.h to display/intel_display_types.hJani Nikula1-1/+1
Everything about the file is about display, and mostly about types related to display. Move under display/ as intel_display_types.h to reflect the facts. There's still plenty to clean up, but start off with moving the file where it logically belongs and naming according to contents. v2: fix the include guard name in the renamed file Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-15drm/i915: Add support for retrying hotplugImre Deak1-3/+5
There is some scenarios that we are aware that sink probe can fail, so lets add the infrastructure to let hotplug() hook to request another probe after some time. v2: Handle shared HPD pins (Imre) v3: Rebased v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep it consistent(Rodrigo) v5: Making the working queue used explicit through all the callers to hotplug_work (Ville) Tested-by: Timo Aaltonen <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-11drm/i915/sdvo: Fix handling if zero hbuf sizeVille Syrjälä1-13/+19
The spec says: "A value of 0 indicates that this buffer does not exist" So we should not convert a hbuf_size of 0 into 1. Also pull the relevant code into a helper to avoid making the same mistake multiple times. And while at it fix the debug prints to not say "hbuf_len" twice. v2: s/%i/%u/ in the debug (Imre) Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]>
2019-07-10Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi1-4/+5
Catch-up with 5.2. Specially to remove a drm-tip merge fixup around intel_workarounds. Signed-off-by: Rodrigo Vivi <[email protected]>
2019-07-09drm/i915/sdvo: Add helpers to get the cmd/status stringVille Syrjälä1-10/+30
Add sdvo_cmd_name() and sdvo_cmd_status() helpers to avoid bothering the callers with the implementation details of the storage for these strings. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2019-07-09drm/i915/sdvo: Shrink sdvo_cmd_names[] stringsVille Syrjälä1-108/+111
Drop the redundant "SDVO_CMD_" prefix from the command name strings in sdvo_cmd_names[]. While at it throw away the unused struct name, and undef SDVO_CMD_NAME_ENTRY() when we're done. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2019-07-09drm/i915/sdvo: Remove duplicate SET_INPUT_TIMINGS_PART1 cmd name stringVille Syrjälä1-1/+0
sdvo_cmd_names[] contains two entries for SET_INPUT_TIMINGS_PART1. Remove one of them. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2019-07-09drm/i915/sdvo: Use named initializers for the SDVO command namesVille Syrjälä1-8/+8
Use named initializers to make it easier to associate the SDVO debug prints with the SDVO command defines. Also switch to using ARRAY_SIZE() instead of assuming that SDVO_CMD_STATUS_SCALING_NOT_SUPP is the last command type. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2019-06-21Merge tag 'drm-intel-next-2019-06-19' of ↵Dave Airlie1-0/+3334
git://anongit.freedesktop.org/drm/drm-intel into drm-next Features: - HDR support (Uma, Ville) - Add I2C symlink under HDMI connector similar to DP (Oleg) - Add ICL multi-segmented gamma support (Shashank, Uma) - Update register whitelist support for new hardware (Robert, John) - GuC firmware update with updated ABI interface (Michal, Oscar) - Add support for new DMC header versions (Lucas) - In-kernel blitter client for selftest use (Matthew) - Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt) - EHL platform feature updates (Matt) - Use Command Transport Buffers with GuC on all gens (Daniele) - New i915.force_probe module parameter to replace i915.alpha_support (Jani) Refactoring: - Better runtime PM code abstraction/encapsulation (Daniele) - VBT parsing cleanup and improvements (Jani) - Move display code to its own subdirectory (Jani) - Header cleanup (Jani, Daniele) - Prep work for subsclice mask expansion (Stuart) - Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko) - Remove unused atomic property get/set stubs (Maarten) - GTT cleanups and improvements (Mika) - Pass intel_ types instead of drm_ types in plenty of display code (Ville) - Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko) - Consider AML variants simply as either KBL or CFL ULX (Ville) - State checker cleanups and improvements (Ville) - GEM code reorganization to more files under gem subdirectory (Chris) - Reducing dependency on a coarse struct_mutex (Chris) Fixes: - Fix use of uninitialized/incorrect error pointers (Colin, Dan) - Fix DSI fastboot on some VLV/CHV platforms (Hans) - Fix DSI error path (Hans) - Add ICL port A combo PHY HW state check (Imre) - Fix ICL AUX-B HW not done issue (Imre) - Fix perf whitelist on gen10+ (Lionel) - Fix PSR exit by forcing manual exit on older gens (José) - Match voltage ranges instead of exact values (Lucas) - Fix SDVO HDMI audio, with cleanups (Ville) - Fix plane state dumps (Ville) - Fix driver cleanup code to support driver hot unbind (Janusz) - Add checks for ICL memory bandwidth requirements (Ville) - Fix toggling between no C8 planes vs. at least one C8 plane (Ville) - Improved checks on PLL usage conditions, refactoring (Ville) - Avoid clobbering M/N values in fastset fuzzy checks (Ville) - Take a runtime pm wakeref for atomic commits (Chris) - Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris) - Avoid refcount_inc on known zero count to avoid debug flagging (Chris) Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-17drm/i915: move modesetting output/encoder code under display/Jani Nikula1-0/+3333
Add a new subdirectory for display code, and start off by moving modesetting output/encoder code. Judging by the include changes, this is a surprisingly clean operation. v2: - move intel_sdvo_regs.h too - use tabs for Makefile file lists and sort them Cc: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Acked-by: Ville Syrjälä <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]