aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/fsl-dcu
AgeCommit message (Collapse)AuthorFilesLines
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-3/+2
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <[email protected]> Cc: kernel test robot <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: [email protected] Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Acked-by: Daniel Vetter <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+4
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-09-08Merge tag 'v5.9-rc4' into drm-nextDave Airlie1-3/+3
Backmerge 5.9-rc4 as there is a nasty qxl conflict that needs to be resolved. Signed-off-by: Dave Airlie <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+3
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-08drm: Remove unnecessary drm_panel_attach and drm_panel_detachJoe Perches1-9/+0
These functions are now empty and no longer useful so remove the functions and their uses. Signed-off-by: Joe Perches <[email protected]> Cc: Bernard Zhao <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]>, Cc: Thomas Zimmermann <[email protected]> Cc: Thierry Reding <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Icenowy Zheng <[email protected]>, Cc: Jagan Teki <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Robert Chiras <[email protected]> Cc: [email protected], Cc: [email protected] Cc: [email protected] Signed-off-by: Sam Ravnborg <[email protected]> # Fixed build and a few warnings Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-10drm/fsl-dcu: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPSThomas Zimmermann1-6/+1
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver to their defaults. No functional changes are made. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-10drm/fsl-dcu: Use GEM CMA object functionsThomas Zimmermann1-5/+1
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-02drm/fsl-dcu: Use simple encoderThomas Zimmermann1-11/+3
The fsl-dcu driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart1-1/+1
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-09drm/panel: decouple connector from drm_panelSam Ravnborg1-1/+1
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Jeffrey Hugo <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Jonas Karlman <[email protected]> Cc: Jernej Skrabec <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Inki Dae <[email protected]> Cc: Joonyoung Shim <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: CK Hu <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Kieran Bingham <[email protected]> Cc: Sandy Huang <[email protected]> Cc: "Heiko Stübner" <[email protected]> Cc: Benjamin Gaignard <[email protected]> Cc: Vincent Abriou <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: Torsten Duwe <[email protected]> Cc: Vasily Khoruzhick <[email protected]> Cc: Icenowy Zheng <[email protected]> Cc: Sean Paul <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Hariprasad Kelam <[email protected]> Cc: Alexios Zavras <[email protected]> Cc: Brian Masney <[email protected]> Cc: Rob Clark <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Allison Randal <[email protected]> Cc: Shayenne Moura <[email protected]> Cc: Abhinav Kumar <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon1-0/+1
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-10drm/fsl-dcu: fix opencoded use of drm_panel_*Sam Ravnborg1-9/+1
Use drm_panel_get_modes() to access modes. This has a nice side effect to simplify the code. drm_panel_get_modes() may return a negative value if for example panel is NULL. This is a small change compared to before, but really what we want. v2: - Add more info to changelog (Stefan) Signed-off-by: Sam Ravnborg <[email protected]> Acked-by: Stefan Agner <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Cc: Alison Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-15drm/fsl-dcu: drop use of drmP.hSam Ravnborg5-6/+7
Drop use of the deprecated drmP.h header file. Fix fallout. Signed-off-by: Sam Ravnborg <[email protected]> Acked-by: Stefan Agner <[email protected]> Acked-by: Emil Velikov <[email protected]> Cc: Alison Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-21drm/fsl-dcu: Drop drm_gem_prime_export/importDaniel Vetter1-2/+0
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Acked-by: Stefan Agner <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter1-2/+1
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: NXP Linux Team <[email protected]> Cc: [email protected] Cc: [email protected] Cc: VMware Graphics <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner11-55/+11
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-14Merge tag 'backlight-next-5.2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
2019-04-03video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbolAlexander Shiyan1-1/+0
We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job. The patch removes useless BACKLIGHT_LCD_SUPPORT option and converts LCD_CLASS_DEVICE into a menu. Signed-off-by: Alexander Shiyan <[email protected]> Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> Acked-by: Daniel Thompson <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-03-18drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart1-1/+1
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Linus Walleij <[email protected]> Reviewed-by: Stefan Agner <[email protected]> Tested-by: Sebastian Reichel <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2019-01-29drm/irq: Don't check for DRIVER_HAVE_IRQ in drm_irq_(un)installDaniel Vetter1-1/+1
If a non-legacy driver calls these it's valid to assume there is interrupt support. The flag is really only needed for legacy drivers, which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL legacy IOCTL. Also remove all the flag usage from non-legacy drivers. v2: Review from Emil: - improve commit message - I forgot hibmc, fix that Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter5-5/+5
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Laurent Pinchart <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Acked-by: Benjamin Gaignard <[email protected]> Acked-by: Jani Nikula <[email protected]> Acked-by: Neil Armstrong <[email protected]> Acked-by: Oleksandr Andrushchenko <[email protected]> Acked-by: CK Hu <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-01drm/fsl-dcu: Use drm_fbdev_generic_setup()Noralf Trønnes2-23/+3
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Acked-by: Stefan Agner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-01drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parametersSatendra Singh Thakur1-18/+14
Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length. Cc: Madhur Verma <[email protected]> Cc: Hemanshu Srivastava <[email protected]> Signed-off-by: Satendra Singh Thakur <[email protected]> Signed-off-by: Stefan Agner <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-01drm/fsl-dcu: drop unused drm_crtc_index()Stefan Agner1-2/+1
The result of drm_crtc_index() is unused. Remove the call and the unused variable. Signed-off-by: Stefan Agner <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-26drm/fsl-dcu: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-4/+4
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Signed-off-by: Stefan Agner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter1-1/+1
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon1-2/+3
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-12-05drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes2-20/+6
Replace driver's code with the generic helpers that do the same thing. Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Acked-by: Stefan Agner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-23Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-7/+1
Pull more drm updates from Dave Airlie: "Fixes/cleanups for rc1, non-desktop flags for VR - remove the MSM dt-bindings file Rob managed to push in the previous pull. - add a property/edid quirk to denote HMD devices, I had these hanging around for a few weeks and Keith had done some work on them, they are fairly self contained and small, and only affect people using HTC Vive VR headsets so far. - amdgpu, tegra, tilcdc, fsl fixes - some imx-drm cleanups I missed, these seemed pretty small, and no reason to hold off. I have one TTM regression fix (fixes bochs-vga in qemu) sitting locally awaiting review I'll probably send that in a separate pull request tomorrow" * tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits) dt-bindings: remove file that was added accidentally drm/edid: quirk HTC vive headset as non-desktop. [v2] drm/fb: add support for not enabling fbcon on non-desktop displays [v2] drm: add connector info/property for non-desktop displays [v2] drm/amdgpu: fix rmmod KCQ disable failed error drm/amdgpu: fix kernel hang when starting VNC server drm/amdgpu: don't skip attributes when powerplay is enabled drm/amd/pp: fix typecast error in powerplay. drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support drm/tegra: sor: Reimplement pad clock Revert "drm/radeon: dont switch vt on suspend" drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence drm/amd/powerplay: fix unfreeze level smc message for smu7 drm/amdgpu:fix memleak drm/amdgpu:fix memleak in takedown drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() drm/fsl-dcu: avoid disabling pixel clock twice on suspend ...
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+2
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-14drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()Stefan Agner1-1/+1
The resume helpers wait for a vblank to occurre hence IRQ need to be enabled. This avoids a warning as follows during resume: WARNING: CPU: 0 PID: 314 at drivers/gpu/drm/drm_atomic_helper.c:1249 drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288 [CRTC:28:crtc-0] vblank wait timed out Signed-off-by: Stefan Agner <[email protected]>
2017-11-14drm/fsl-dcu: avoid disabling pixel clock twice on suspendStefan Agner1-1/+0
With commit 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") the pixel clock is controlled by the CRTC code. Disabling the pixel clock in suspend leads to a warning due to the second clk_disable_unprepare call: WARNING: CPU: 0 PID: 359 at drivers/clk/clk.c:594 clk_core_disable+0x8c/0x90 Remove clk_disable_unprepare call for pixel clock to avoid unbalanced clock disable on suspend. Fixes: 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") Signed-off-by: Stefan Agner <[email protected]>
2017-11-14drm/fsl-dcu: Don't set connector DPMS propertyLaurent Pinchart1-5/+0
Since commit 4a97a3da420b ("drm: Don't update property values for atomic drivers") atomic drivers must not update property values as properties are read from the state instead. To catch remaining users, the drm_object_property_set_value() function now throws a warning when called by atomic drivers on non-immutable properties, and we hit that warning when creating connectors. The easy fix is to just remove the drm_object_property_set_value() as it is used here to set the initial value of the connector's DPMS property to OFF. The DPMS property applies on top of the connector's state crtc pointer (initialized to NULL) that is the main connector on/off control, and should thus default to ON. Fixes: 4a97a3da420b ("drm: Don't update property values for atomic drivers") Cc: [email protected] Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Stefan Agner <[email protected]>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Philippe Ombredanne <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-10-01drm/fsl-dcu: Use drm_gem_fb_create()Noralf Trønnes1-1/+2
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <[email protected]> Cc: Archit Taneja <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Peter Senna Tschudin <[email protected]> Cc: Martin Donnelly <[email protected]> Cc: Martyn Welch <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Sean Paul <[email protected]> Cc: David Airlie <[email protected]> Cc: Inki Dae <[email protected]> Cc: Joonyoung Shim <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Cc: Russell King <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: CK Hu <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Carlo Caione <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Mark Yao <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Benjamin Gaignard <[email protected]> Cc: Vincent Abriou <[email protected]> Cc: Yannick Fertre <[email protected]> Cc: Philippe Cornu <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: Jyri Sarha <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: Shawn Guo <[email protected]> Cc: John Stultz <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Sergei Shtylyov <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Tomeu Vizoso <[email protected]> Cc: Yakir Yang <[email protected]> Cc: Marek Szyprowski <[email protected]> Cc: Jose Abreu <[email protected]> Cc: Romain Perier <[email protected]> Cc: Kieran Bingham <[email protected]> Cc: Xinliang Liu <[email protected]> Cc: Alexey Brodkin <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Rongrong Zou <[email protected]> Cc: Rob Clark <[email protected]> Cc: Hai Li <[email protected]> Cc: "Noralf Trønnes" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: zain wang <[email protected]> Cc: Baoyou Xie <[email protected]> Cc: Boris Brezillon <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Neil Armstrong <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Philipp Zabel <[email protected]> Acked-by: Archit Taneja <[email protected]> Tested-by: Philippe Cornu <[email protected]> (on stm) Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Shawn Guo <[email protected]> Acked-by: Shawn Guo <[email protected]> Acked-by: Noralf Trønnes <[email protected]> Acked-by: Vincent Abriou <[email protected]>
2017-08-04drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner <[email protected]> Cc: Alison Wang <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Acked-by: Stefan Agner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-08-01drm: Plumb modifiers through plane initBen Widawsky1-1/+1
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <[email protected]> Reviewed-by: Daniel Stone <[email protected]> (v2) Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Daniel Stone <[email protected]>
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart1-2/+3
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Maxime Ripard <[email protected]> # for sun4i Acked-by: Philipp Zabel <[email protected]> # for imx-drm and mediatek Acked-by: Alexey Brodkin <[email protected]> # for arcpgu Acked-by: Boris Brezillon <[email protected]> # for atmel-hlcdc Acked-by: Liviu Dudau <[email protected]> # for hdlcd and mali-dp Acked-by: Stefan Agner <[email protected]> # for fsl-dcu Tested-by: Philippe Cornu <[email protected]> # for stm Acked-by: Philippe Cornu <[email protected]> # for stm Acked-by: Vincent Abriou <[email protected]> # for sti Reviewed-by: Thomas Hellstrom <[email protected]> # for vmwgfx Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-06-08drm/fsl-dcu: use new drm_atomic_helper_shutdownStefan Agner1-1/+1
Commit 18dddadc78c9 ("drm/atomic: Introduce drm_atomic_helper_shutdown") introduced a new helper to shutdown all CRTCs to replace the buggy drm_crtc_force_disable_all() function. Make use of the new atomic helper drm_atomic_helper_shutdown() to shutdown CRTCs. Signed-off-by: Stefan Agner <[email protected]>
2017-06-08drm/fsl-dcu: implement irq_preinstall/uninstall callbacksStefan Agner1-12/+8
Make use of the irq_preinstall/uninstall callback to clear and mask all interrupts. Use write 1 to clear as documented by the data sheet (writing a 0 seems to have cleared interrupt status too). Remove fsl_dcu_drm_irq_init and call drm_irq_install directly from fsl_dcu_load makes error handling a bit simpler. Do not set irq_enabled since drm_irq_install is taking care of it. Signed-off-by: Stefan Agner <[email protected]>
2017-06-08drm/fsl: Drop drm_vblank_cleanupDaniel Vetter1-2/+0
Again cleanup before irq disabling doesn't really stop the races, so just drop it. Proper fix would be to put drm_atomic_helper_shutdown before everything gets cleaned up. Cc: Stefan Agner <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Stefan Agner <[email protected]>
2017-04-06drm: convert drivers to use drm_of_find_panel_or_bridgeRob Herring1-32/+12
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <[email protected]> Reviewed-by: Archit Taneja <[email protected]> Tested-by: Philipp Zabel <[email protected]> Acked-by: Maxime Ripard <[email protected]> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by: Sean Paul <[email protected]>
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter1-11/+1
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <[email protected]> Reviewed-by: Sean Paul <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-02-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter1-5/+7
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter <[email protected]>
2017-02-08drm: fsl-dcu: use vblank hooks in struct drm_crtc_funcsShawn Guo2-25/+26
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Signed-off-by: Shawn Guo <[email protected]> Cc: Stefan Agner <[email protected]> Acked-by: Stefan Agner <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-02-07drm/fsl-dcu: check for clk_prepare_enable() errorFabio Estevam1-2/+6
clk_prepare_enable() may fail, so we should better check its return value. Also place the of_node_put() function right after clk_prepare_enable(), in order to avoid calling of_node_put() twice in case clk_prepare_enable() fails. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Stefan Agner <[email protected]>
2017-02-07drm/fsl-dcu: remove unneeded 'ret' assignmentFabio Estevam1-3/+1
When devm_kzalloc() fails there is no need to assign an error code to the 'ret' variable as it will not be used after jumping to the 'err_node_put' label, so just remove the assignment. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Stefan Agner <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.