aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_crtc.c
AgeCommit message (Collapse)AuthorFilesLines
2012-05-29drm: Use stdint types for consistencyVille Syrjälä1-2/+2
The rest of the code uses stdint types, so use them in drm_property_change_is_valid() as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29drm: Constify params to format_check() and framebuffer_checks()Ville Syrjälä1-2/+2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm: add plane propertiesRob Clark1-0/+19
The omapdrm driver uses this for setting per-overlay rotation. It is likely also useful for setting YUV->RGB colorspace conversion matrix, etc. Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm: add bitmask property typeRob Clark1-3/+44
A bitmask property is similar to an enum. The enum value is a bit position (0-63), and valid property values consist of a mask of zero or more of (1 << enum_val[n]). [airlied: 1LL -> 1ULL] Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm: Make the CRTC gamma_set operation optionalLaurent Pinchart1-0/+5
Drivers for hardware without gamma support should not be forced to implement a no-op gamma set operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm: Miscellaneous typo fixes and documentation updatesLaurent Pinchart1-1/+1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm: Don't initialize local ret variable when not neededLaurent Pinchart1-6/+6
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add CRTC propertiesPaulo Zanoni1-0/+20
The i915 driver needs this for the rotation and overscan compensation properties. Other drivers might need this too. Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add 'count' to struct drm_object_propertiesPaulo Zanoni1-37/+27
This way, we don't need to count every time, so we're a little bit faster and code is a little bit smaller. Change suggested by Ville Syrjälä. Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: make the connector properties code use the object properties codePaulo Zanoni1-86/+12
In the future, we may want to kill the internal functions: - drm_connector_attach_property - drm_connector_property_set_value - drm_connector_property_get_value It seems the IOCTL drm_mode_connector_property_set_ioctl will have to live, but we may change libdrm to not use it anymore, if we want. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add generic ioctls to get/set properties on any objectPaulo Zanoni1-0/+182
Useless for connector properties (since they already have their own ioctls), but useful when we add properties to CRTCs, planes and other objects. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: create struct drm_object_properties and use itPaulo Zanoni1-22/+23
For now, only connectors have it. In the future, all objects that need properties should use it. Since the structure is referenced inside struct drm_mode_object, we will be able to deal with object properties without knowing the real type of the object. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: WARN() when drm_connector_attach_property failsPaulo Zanoni1-5/+5
Also return void instead of int. We have more than 100 callers and no one checks for the return value. If this function fails the property won't be exposed by the get/set ioctls, but we should probably survive. If this starts happening, the solution will be to increase DRM_CONNECTOR_MAX_PROPERTY and recompile the Kernel. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add drm_property_change_is_validPaulo Zanoni1-20/+19
Move code from drm_mode_connector_property_set_ioctl to a new function, so we can reuse this code when we add crtc properties. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-07Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel ↵Dave Airlie1-4/+6
into drm-core-next Daniel prepared this branch with a back-merge as git was getting very confused about changes in intel_display.c
2012-05-07Merge tag 'v3.4-rc6' into drm-intel-nextDaniel Vetter1-4/+6
Conflicts: drivers/gpu/drm/i915/intel_display.c Ok, this is a fun story of git totally messing things up. There /shouldn't/ be any conflict in here, because the fixes in -rc6 do only touch functions that have not been changed in -next. The offending commits in drm-next are 14415745b2..1fa611065 which simply move a few functions from intel_display.c to intel_pm.c. The problem seems to be that git diff gets completely confused: $ git diff 14415745b2..1fa611065 is a nice mess in intel_display.c, and the diff leaks into totally unrelated functions, whereas $git diff --minimal 14415745b2..1fa611065 is exactly what we want. Unfortunately there seems to be no way to teach similar smarts to the merge diff and conflict generation code, because with the minimal diff there really shouldn't be any conflicts. For added hilarity, every time something in that area changes the + and - lines in the diff move around like crazy, again resulting in new conflicts. So I fear this mess will stay with us for a little longer (and might result in another backmerge down the road). Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-02drm/kms: reduce some messages to debug level (v2)Dave Airlie1-9/+9
These can all be trigged from userspace if you pass the right values. v2: rebase on later kernel. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm: Unify and fix idr error handlingVille Syrjälä1-1/+3
The error handling code w.r.t. idr usage looks inconsistent. In the case of drm_mode_object_get() and drm_ctxbitmap_next() the error handling is also incomplete. Unify the code to follow the same pattern always. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-20drm: Add sanity checks to framebuffer creationVille Syrjälä1-4/+43
Perform some basic sanity check on some of the parameters in drm_mode_fb_cmd2. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-20drm: Add drm_format_{horz, vert}_chroma_subsampling() utility functionsVille Syrjälä1-0/+60
These functions return the chroma subsampling factors for the specified pixel format. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-20drm: Add drm_format_plane_cpp() utility functionVille Syrjälä1-0/+45
This function returns the bytes per pixel value based on the pixel format and plane index. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-20drm: Move drm_format_num_planes() to drm_crtc.cVille Syrjälä1-0/+32
There will be a need for this function in drm_crtc.c later. This avoids making drm_crtc.c depend on drm_crtc_helper.c. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drm: fix page_flip error handlingJoonyoung Shim1-4/+6
Free event and restore event_space only when page_flip->flags has DRM_MODE_PAGE_FLIP_EVENT if page_flip() is failed. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/usb: move usb support into a separate moduleDave Airlie1-0/+1
In order to satisfy all the various Kconfig options between USB and DRM, we need to split the USB code out into a separate module and export symbols to it. This fixes build problems in -next reported by sfr. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm/modeset: add helper to unplug all connectors from sysfsDave Airlie1-3/+14
In order to get correct ordering at hot-unplug for userspace, we need to tear down all the sysfs bits at the correct time. This adds a helper to allow drivers to remove the sysfs nodes for all connectors. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Use a flexible array member for blob property dataVille Syrjälä1-1/+0
The blob property data is always allocated immediately after the object header. No need for the extra indirection when accessing it, just use a flexible array member. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Handle drm_object_get() failuresVille Syrjälä1-23/+72
Check drm_mode_object_get() return value everywhere. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Make drm_crtc_convert_{umode, to_umode} static and constify their paramsVille Syrjälä1-4/+4
drm_crtc_convert_umode() and drm_crtc_convert_to_umode() are never used outside drm_crtc.c, so make them static. Also make the input mode structure const for both functions. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Fix drm_mode_attachmode_crtc()Ville Syrjälä1-11/+27
Change drm_mode_attachmode_crtc() to take an "all or nothing" approach. If an error is returned, there are no side effects visible. Also change the function to always duplicate the mode passed in. Also change the function to not give up when it finds the first connector without and encoder. A simpler approach would be to just remove the function completely as it's unused currently. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Check CRTC viewport against framebuffer sizeVille Syrjälä1-0/+24
Make sure the requested CRTC viewport fits inside the framebuffer. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Check user mode against overflowsVille Syrjälä1-5/+28
The internal mode representation drm_display_mode uses signed data types. When converting the user mode to internal representation, check that the unsigned values don't overflow the signed datatypes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Fix memory leak in drm_mode_setcrtc()Ville Syrjälä1-0/+9
The mode passed to the .set_config() hook was never freed. The drivers will make a copy of the mode, so simply free it when done. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Make drm_mode_attachmode() voidVille Syrjälä1-11/+5
drm_mode_attachmode() always returns 0. Change the return type to void. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Check crtc x and y coordinatesVille Syrjälä1-0/+4
The crtc x/y panning coordinates are stored as signed integers internally. The user provides them as unsigned, so we should check that the user provided values actually fit in the internal datatypes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Warn if mode to umode conversion overflows the destination typesVille Syrjälä1-0/+7
When converting from a drm_display_mode to drm_mode_modeinfo, print a warning if the the timings values don't fit into the __u16 datatype. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Reject mode set with current fb if no current fb is boundVille Syrjälä1-8/+6
When doing a mode set with the special fb id -1, reject the mode set if no fb is currently bound to the crtc. Also remove the pointless list traversal to find the current crtc based on the current crtc :) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-09drm: add convenience function to create an range propertySascha Hauer1-40/+29
Creating a range property is a common pattern, so create a convenience function for this and use it where appropriate. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-09drm: add convenience function to create an enum propertySascha Hauer1-54/+46
Creating an enum property is a common pattern, so create a convenience function for this and use it where appropriate. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm crtc: Fix locking commentsSascha Hauer1-6/+15
Several comments above functions say that the caller must hold the mode_config lock, but the functions take the lock themselves. Fix the comments. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm: add proper return value for drm_mode_crtc_set_gamma_sizeSascha Hauer1-3/+3
drm_mode_crtc_set_gamma_size returns boolean true for success and false for failure. This is not very kernel conform, so change it to return 0 for success and a propert error code otherwise. Noone checks the return value, so no users have to be fixed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm crtc: use drm_mode_destroy instead of kfree in drm_mode_removeSascha Hauer1-1/+1
Modes are created using drm_mode_create which does a drm_mode_object_get, so use drm_mode_destroy in drm_mode_remove which does a drm_mode_object_put. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm crtc: add forgotten idr cleanup functionsSascha Hauer1-0/+3
drm_mode_config_init initializes the idr with idr_init, so add the missing counterparts in drm_mode_config_cleanup. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: add support for private planesRob Clark1-5/+17
In cases where the scanout hw is sufficiently similar between "overlay" and traditional crtc layers, it might be convenient to allow the driver to create internal drm_plane helper objects used by the drm_crtc implementation, rather than duplicate code between the plane and crtc. A private plane is not exposed to userspace. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: disconnect plane from fb/crtc when disabledRob Clark1-0/+3
Since plane->fb and plane->crtc are set in drm_mode_setplane() after update_plane(), They should be cleared after disable(). Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20Merge tag 'v3.2-rc6' of /home/airlied/devel/kernel/linux-2.6 into drm-core-nextDave Airlie1-1/+7
Merge in the upstream tree to bring in the mainline fixes. Conflicts: drivers/gpu/drm/exynos/exynos_drm_fbdev.c drivers/gpu/drm/nouveau/nouveau_sgdma.c
2011-12-20drm: Replace pitch with pitches[] in drm_framebufferVille Syrjälä1-1/+1
Otherwise each driver would need to keep the information inside their own framebuffer object structure. Also add offsets[]. BOs on the other hand are driver specific, so those can be kept in driver specific structures. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: Check that the requested pixel format is validVille Syrjälä1-0/+75
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: plane: Check that the fb pixel format is supported by the planeVille Syrjälä1-0/+11
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: plane: Make 'formats' parameter to drm_plane_init() constVille Syrjälä1-1/+1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: plane: Check crtc coordinates against integer overflows in setplane ioctlVille Syrjälä1-0/+12
Help drivers a little by guaranteeing that crtc_x+crtc_w and crtc_y+crtc_h don't overflow. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Powered by cgit, Gruvboxed by Blaster4385.