aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/armada
AgeCommit message (Collapse)AuthorFilesLines
2023-06-01drm/armada: Use regular fbdev I/O helpersThomas Zimmermann2-5/+3
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Armada does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-4-tzimmermann@suse.de
2023-05-09Merge drm/drm-next into drm-misc-nextMaxime Ripard1-1/+0
Start the 6.5 release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-04-21drm/armada: Implement fbdev emulation as in-kernel clientThomas Zimmermann4-69/+73
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to armada_fbdev_setup() after armada has registered its DRM device. As in most drivers, aramda's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within armada. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-5-tzimmermann@suse.de
2023-04-21drm/armada: Initialize fbdev DRM clientThomas Zimmermann1-4/+39
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-4-tzimmermann@suse.de
2023-04-21drm/armada: Hide fbdev support behind config optionThomas Zimmermann2-3/+14
Only build armada's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION has been enabled. No functional changes, but allows to build armada without fbdev. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-3-tzimmermann@suse.de
2023-04-21drm/armada: Include <linux/of.h>Thomas Zimmermann1-0/+1
Include <linux/of.h> to get declarations of of_node_put() and of_device_is_available(). No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-2-tzimmermann@suse.de
2023-04-16drm/aperture: Remove primary argumentDaniel Vetter1-1/+1
Only really pci devices have a business setting this - it's for figuring out whether the legacy vga stuff should be nuked too. And with the preceding two patches those are all using the pci version of this. Which means for all other callers primary == false and we can remove it now. v2: - Reorder to avoid compile fail (Thomas) - Include gma500, which retained it's called to the non-pci version. v4: - fix Daniel's S-o-b address v5: - add back an S-o-b tag with Daniel's Intel address Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Deepak Rawat <drawat.floss@gmail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Emma Anholt <emma@anholt.net> Cc: Helge Deller <deller@gmx.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-hyperv@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de
2023-04-11drm/armada: Fix a potential double free in an error handling pathChristophe JAILLET1-1/+0
'priv' is a managed resource, so there is no need to free it explicitly or there will be a double free(). Fixes: 90ad200b4cbc ("drm/armada: Use devm_drm_dev_alloc") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/c4f3c9207a9fce35cb6dd2cc60e755275961588a.1640536364.git.christophe.jaillet@wanadoo.fr
2023-02-21drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()Thomas Zimmermann1-0/+3
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the calling fbdev implementation. Avoids a possible stale mutex with generic fbdev code. As indicated by its name, drm_fb_helper_prepare() prepares struct drm_fb_helper before setting up the fbdev support with a call to drm_fb_helper_init(). In legacy fbdev emulation, this happens next to each other. If successful, drm_fb_helper_fini() later tear down the fbdev device and also unprepare via drm_fb_helper_unprepare(). Generic fbdev emulation prepares struct drm_fb_helper immediately after allocating the instance. It only calls drm_fb_helper_init() as part of processing a hotplug event. If the hotplug-handling fails, it runs drm_fb_helper_fini(). This unprepares the fb-helper instance and the next hotplug event runs on stale data. Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini() into the fbdev implementations. Call it right before freeing the fb-helper instance. Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
2023-01-26drm/fb-helper: Initialize fb-helper's preferred BPP in prepare functionThomas Zimmermann1-2/+2
Initialize the fb-helper's preferred_bpp field early from within drm_fb_helper_prepare(); instead of the later client hot-plugging callback. This simplifies the generic fbdev setup function. No real changes, but all drivers' fbdev code has to be adapted. v3: * build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
2022-11-05drm/fb-helper: Perform all fbdev I/O with the same implementationThomas Zimmermann1-0/+2
Implement the fbdev's read/write helpers with the same functions. Use the generic fbdev's code as template. Convert all drivers. DRM's fb helpers must implement regular I/O functionality in struct fb_ops and possibly perform a damage update. Handle all this in the same functions and convert drivers. The functionality has been used as part of the generic fbdev code for some time. The drivers don't set struct drm_fb_helper.fb_dirty, so they will not be affected by damage handling. For I/O memory, fb helpers now provide drm_fb_helper_cfb_read() and drm_fb_helper_cfb_write(). Several drivers require these. Until now tegra used I/O read and write, although the memory buffer appears to be in system memory. So use _sys_ helpers now. v3: * fix docs (Javier) v2: * rebase onto vmwgfx changes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-18-tzimmermann@suse.de
2022-11-05drm/fb-helper: Rename drm_fb_helper_unregister_fbi() to use _info postfixThomas Zimmermann1-1/+1
Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info() as part of unifying the naming within fbdev helpers. Adapt drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de
2022-11-05drm/fb-helper: Rename drm_fb_helper_alloc_fbi() to use _info postfixThomas Zimmermann1-1/+1
Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as part of unifying the naming within fbdev helpers. Adapt drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de
2022-10-18drm/armada: Prepare to dynamic dma-buf locking specificationDmitry Osipenko1-4/+4
Prepare Armada driver to the common dynamic dma-buf locking convention by starting to use the unlocked versions of dma-buf API functions. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-6-dmitry.osipenko@collabora.com
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich1-3/+3
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-07-26drm/armada: Use drm_plane_helper_destroy()Thomas Zimmermann1-7/+2
Replace the driver's own function with drm_plane_helper_destroy(). No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-7-tzimmermann@suse.de
2022-07-26drm/plane-helper: Export individual helpersThomas Zimmermann1-1/+1
Export the individual plane helpers that make up the plane functions and align the naming with other helpers. The plane helpers are for non-atomic modesetting and exporting them will simplify a later conversion of drivers to atomic modesetting. With struct drm_plane_funcs removed from drm_plane_helper.h, also remove the include statements. It only needs linux/types.h for uint32_t and a number of forward declarations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-6-tzimmermann@suse.de
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann2-2/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-07-05drm: Remove linux/fb.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for linux/fb.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/fb.h. Quite a few placs do currently depend on linux/fb.h or other headers pulled in by it without actually including any of it directly. All of those need to be fixed up. v2: Split the vmwgfx change out Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+2
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-14/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-02-25drm/armada: Make use of the helper component_compare_of/dev_nameYong Wu1-14/+3
Use the common compare helpers from component. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-4-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/armada: Add support for the nomodeset kernel parameterJavier Martinez Canillas1-0/+3
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-22-javierm@redhat.com
2021-11-04Merge tag 'char-misc-5.16-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-10-25dma-buf: move dma-buf symbols into the DMA_BUF module namespaceGreg Kroah-Hartman1-0/+2
In order to better track where in the kernel the dma-buf code is used, put the symbols in the namespace DMA_BUF and modify all users of the symbols to properly import the namespace to not break the build at the same time. Now the output of modinfo shows the use of these symbols, making it easier to watch for users over time: $ modinfo drivers/misc/fastrpc.ko | grep import import_ns: DMA_BUF Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}Andreas Gruenbacher1-4/+3
Turn fault_in_pages_{readable,writeable} into versions that return the number of bytes not faulted in, similar to copy_to_user, instead of returning a non-zero value when any of the requested pages couldn't be faulted in. This supports the existing users that require all pages to be faulted in as well as new users that are happy if any pages can be faulted in. Rename the functions to fault_in_{readable,writeable} to make sure this change doesn't silently break things. Neither of these functions is entirely trivial and it doesn't seem useful to inline them, so move them to mm/gup.c. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann1-1/+1
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-29drm/armada: Don't set struct drm_device.irq_enabledThomas Zimmermann1-2/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in armada. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-6-tzimmermann@suse.de
2021-06-24drm/armada: Remove prepare/cleanup_fb hooksDaniel Vetter3-33/+0
All they do is refcount the fb, which the atomic helpers already do. This is was necessary with the legacy helpers and I guess just carry over in the conversion. drm_plane_state always has a full reference for its ->fb pointer during its entire lifetime, see __drm_atomic_helper_plane_destroy_state() Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-10-daniel.vetter@ffwll.ch
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann1-3/+2
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard2-2/+4
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard2-4/+12
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard2-82/+85
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard1-2/+2
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard2-2/+4
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-19/+22
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2020-12-15drm: automatic legacy gamma supportTomi Valkeinen1-1/+0
To support legacy gamma ioctls the drivers need to set drm_crtc_funcs.gamma_set either to a custom implementation or to drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the latter. We can simplify this by making the core handle it automatically. Move the drm_atomic_helper_legacy_gamma_set() functionality into drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
2020-11-17drm/armada/armada_overlay: Staticify local function ↵Lee Jones1-1/+1
'armada_overlay_duplicate_state' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/armada/armada_overlay.c:329:1: warning: no previous prototype for ‘armada_overlay_duplicate_state’ [-Wmissing-prototypes] Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-3-lee.jones@linaro.org
2020-11-10drm: Use state helper instead of CRTC state pointerMaxime Ripard1-2/+6
Many drivers reference the crtc->pointer in order to get the current CRTC state in their atomic_begin or atomic_flush hooks, which would be the new CRTC state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_crtc_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct tegra_dc_state *crtc_state = e; + struct tegra_dc_state *dc_state = e; <+... - crtc_state + dc_state ...+> } @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct mtk_crtc_state *crtc_state = e; + struct mtk_crtc_state *mtk_crtc_state = e; <+... - crtc_state + mtk_crtc_state ...+> } @ replaces_new_state @ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = crtc->state; + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ adds_new_state @ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ include depends on adds_new_state || replaces_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_new_state || replaces_new_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105164518.392891-1-maxime@cerno.tech
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-4/+3
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-2/+2
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic_checkMaxime Ripard1-4/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard1-13/+11
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+6
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-09-25drm/armada: Introduce GEM object functionsThomas Zimmermann3-6/+11
GEM object functions deprecate several similar callback interfaces in struct drm_driver. This patch replaces the per-driver callbacks with per-instance callbacks in armada. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-3-tzimmermann@suse.de
2020-09-23Merge tag 'drm-misc-next-2020-09-21' of ↵Dave Airlie7-34/+20
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
2020-09-11drm/armada: Don't use drm_device->dev_privateDaniel Vetter7-14/+14
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-3-daniel.vetter@ffwll.ch
2020-09-11drm/armada: Use devm_drm_dev_allocDaniel Vetter1-20/+6
Also remove the now no longer needed build bug on since that's already not needed anymore with drmm_add_final_kfree. Conversion to managed drm_device cleanup is easy, the final drm_dev_put() is already the last thing in both the bind unbind as in the unbind flow. Also, this relies on component.c correctly wrapping bind&unbind in separate devres groups, which it does. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-2-daniel.vetter@ffwll.ch
2020-09-10drm: armada: fix common struct sg_table related issuesMarek Szyprowski1-13/+11
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie4-14/+14
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
Powered by cgit, Gruvboxed by Blaster4385.