aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-09-02drm/amdgpu/gfx10: remap queue after reset successfullyJiadong Zhu1-11/+35
Kiq command unmap_queues only does the dequeueing action. We have to map the queue back with clean mqd. v2: fix up error handling (Alex) Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Jiadong Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx10: add ring reset callbacksAlex Deucher1-0/+91
Add ring reset callbacks for gfx and compute. v2: fix gfx handling v3: wait for KIQ to complete Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx11: wait for reset done before remapJiadong Zhu1-1/+14
There is a racing condition that cp firmware modifies MQD in reset sequence after driver updates it for remapping. We have to wait till CP_HQD_ACTIVE becoming false then remap the queue. Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Jiadong Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx11: rename gfx_v11_0_gfx_init_queue()Alex Deucher1-3/+3
Rename to gfx_v11_0_kgq_init_queue() to better align with the other naming in the file. Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx11: fallback to driver reset compute queue directly (v2)Prike Liang1-13/+71
Since the MES FW resets kernel compute queue always failed, this may caused by the KIQ failed to process unmap KCQ. So, before MES FW work properly that will fallback to driver executes dequeue and resets SPI directly. Besides, rework the ring reset function and make the busy ring type reset in each function respectively. Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: 3.2.299Aric Cyr2-2/+2
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza3-73/+72
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <[email protected]> Signed-off-by: Hansen Dsouza <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone1-1/+2
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger4-49/+34
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Gabe Teeger <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Add sharpness control interfaceRelja Vojvodic9-192/+138
- Add interface for controlling shapness level input into DCN. - Update SPL to support custom sharpness values. - Add support for different sharpness values depending on YUV/RGB content. Reviewed-by: Samson Tam <[email protected]> Signed-off-by: Relja Vojvodic <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone24-161/+34
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: disable sharpness if HDR Multiplier is too largeSamson Tam1-1/+5
[Why] Certain profiles have higher HDR multiplier than SDR boost max which is not currently supported [How] Disable sharpness for these profiles Fixes: 1b0ce903fe74 ("drm/amd/display: add improvements for text display and HDR DWM and MPO") Reviewed-by: Martin Leung <[email protected]> Signed-off-by: Samson Tam <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Add dpia debug option to control power managementMeenakshikumar Somasundaram1-1/+2
[Why] To provide option to dpia control power management [How] By adding disable_usb4_pm_support bit field in dpia_debug option to control dpia power management Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx11: add ring reset callbacksAlex Deucher1-0/+18
Add ring reset callbacks for gfx and compute. Acked-by: Vitaly Prosyak <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam1-2/+1
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <[email protected]> Signed-off-by: Samson Tam <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li1-1/+12
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Leo Li <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: only trigger BIOS related assert for older ASICsDaniel Sa1-1/+1
[Why] Some asserts are always hit on startup/Pnp when they should only be used to indicate when something has gone wrong. [How] Ignore result of getting function from bios cmd table for newer asics. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Daniel Sa <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Fix DCN35 set min dispclk logicNicholas Susanto1-3/+3
[Why] Setting min dispclk to 50Mhz outside clock lowering function causes unnecessary calls to SMU to lower dispclk and causes dentist hangs when there is no stream on the pipes. [How] Move the set minimum dispclk logic inside the lowering dispclk if statement. Fixes: 234441320552 ("DCN35 set min dispclk to 50Mhz") Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Nicholas Susanto <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amdgpu/gfx9.4.3: Implement compute pipe resetPrike Liang1-19/+108
Implement the compute pipe reset, and the driver will fallback to pipe reset when queue reset fails. The pipe reset only deactivates the queue which is scheduled in the pipe, and meanwhile the MEC pipe will be reset to the firmware _start pointer. So, it seems pipe reset will cost more cycles than the queue reset; therefore, the driver tries to recover by doing queue reset first. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-30fs: move FMODE_UNSIGNED_OFFSET to fop_flagsChristian Brauner1-0/+1
This is another flag that is statically set and doesn't need to use up an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit. (1) mem_open() used from proc_mem_operations (2) adi_open() used from adi_fops (3) drm_open_helper(): (3.1) accel_open() used from DRM_ACCEL_FOPS (3.2) drm_open() used from (3.2.1) amdgpu_driver_kms_fops (3.2.2) psb_gem_fops (3.2.3) i915_driver_fops (3.2.4) nouveau_driver_fops (3.2.5) panthor_drm_driver_fops (3.2.6) radeon_driver_kms_fops (3.2.7) tegra_drm_fops (3.2.8) vmwgfx_driver_fops (3.2.9) xe_driver_fops (3.2.10) DRM_GEM_FOPS (3.2.11) DEFINE_DRM_GEM_DMA_FOPS (4) struct memdev sets fmode flags based on type of device opened. For devices using struct mem_fops unsigned offset is used. Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts into the open helper to ensure that the flag is always set. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jeff Layton <[email protected]> Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2024-08-30Merge tag 'drm-misc-next-2024-08-29' of ↵Dave Airlie1-23/+72
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-29drm/amdgpu: always allocate cleared VRAM for GEM allocationsAlex Deucher1-0/+3
This adds allocation latency, but aligns better with user expectations. The latency should improve with the drm buddy clearing patches that Arun has been working on. In addition this fixes the high CPU spikes seen when doing wipe on release. v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian) Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528 Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Acked-by: Arunpravin Paneer Selvam <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> (v1) Signed-off-by: Alex Deucher <[email protected]> Cc: Arunpravin Paneer Selvam <[email protected]> Cc: Christian König <[email protected]>
2024-08-29drm/amdgpu/mes: add mes mapping legacy queue switchJack Xiao4-20/+43
For mes11 old firmware has issue to map legacy queue, add a flag to switch mes to map legacy queue. Fixes: f9d8c5c7855d ("drm/amdgpu/gfx: enable mes to map legacy queue support") Reported-by: Andrew Worsley <[email protected]> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.html Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdkfd: Don't drain ih1 for APUYifan Zhang1-5/+8
ih1 is not initialized for APUs. Don't drain it or NULL pointer error will be triggered. Fixes: 6ef29715ac06 ("drm/amdkfd: Change kfd/svm page fault drain handling") Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu/gfx12: return early in preempt_ib()Alex Deucher1-0/+3
When MES is enabled KIQ is not available. Return an error when someone uses the debugfs preempt test interface in that case. Acked-by: Srinivasan Shanmugam <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu/gfx11: return early in preempt_ib()Alex Deucher1-0/+3
When MES is enabled KIQ is not available. Return an error when someone uses the debugfs preempt test interface in that case. Acked-by: Srinivasan Shanmugam <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li1-1/+25
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu: Move the dumping log out of for loopSunil Khatri1-3/+2
log message "Dumping IP State Completed" needs to be logged only once when state dumping is complete. Hence moving it out of the for loop. Signed-off-by: Sunil Khatri <[email protected]> Acked-by: Trigger Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amd/amdgpu: move drain_workqueue before shutdown is setVictor Zhao1-3/+3
[background] when unloading amdgpu driver right after running a workload, drain_workqueue is causing "Fence fallback timer expired on ring sdma0.0". Under sriov, this issue will cause sriov full access timeout and a reset happening. move drain_workqueue before shutdown is set to allow ih process and before enter full access under sriov to avoid full access time cost. Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu: Do core dump immediately when job tmoTrigger Huang1-1/+67
Do the coredump immediately after a job timeout to get a closer representation of GPU's error status. V2: This will skip printing vram_lost as the GPU reset is not happened yet (Alex) V3: Unconditionally call the core dump as we care about all the reset functions(soft-recovery and queue reset and full adapter reset, Alex) V4: Do the dump after adev->job_hang = true (Sunil) Signed-off-by: Trigger Huang <[email protected]> Acked-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu: skip printing vram_lost if neededTrigger Huang3-14/+15
The vm lost status can only be obtained after a GPU reset occurs, but sometimes a dev core dump can be happened before GPU reset. So a new argument is added to tell the dev core dump implementation whether to skip printing the vram_lost status in the dump. And this patch is also trying to decouple the core dump function from the GPU reset function, by replacing the argument amdgpu_reset_context with amdgpu_job to specify the context for core dump. V2: Inform user if VRAM lost check is skipped so users don't assume VRAM wasn't lost (Alex) Signed-off-by: Trigger Huang <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu/gfx9: put queue resets behind a debug optionAlex Deucher3-0/+14
Pending extended validation. Reviewed-and-tested-by: Jiadong Zhu <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu: add experimental resets debug flagAlex Deucher2-0/+7
Add this flag to enable experimental resets for testing before they are fully validated. Reviewed-and-tested-by: Jiadong Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amdgpu/display: Fix a mistake in revert commitFangzhi Zuo1-1/+1
[why] It is to fix in try_disable_dsc() due to misrevert of commit 338567d17627 ("drm/amd/display: Fix MST BW calculation Regression") [How] Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps' Signed-off-by: Fangzhi Zuo <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-29drm/amd/display: switch to guid_gen() to generate valid GUIDsJani Nikula1-11/+12
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter <[email protected]> Acked-by: Harry Wentland <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]>
2024-08-29drm/mst: switch to guid_t type for GUIDJani Nikula1-1/+1
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by: Daniel Vetter <[email protected]> Acked-by: Harry Wentland <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]>
2024-08-28drm/amd/pm: Drop unsupported features on smu v14_0_2Candice Li1-47/+0
Drop unsupported features on smu v14_0_2. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Yang Wang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 3376f922bfe070eff762164b3fc66981e3079417)
2024-08-28drm/amd/pm: Add support for new P2S table revisionLijo Lazar1-1/+6
Add p2s table support for a new revision of SMUv13.0.6. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 010cc730ace807c6d267481b5fb6ff99acc35c46)
2024-08-28drm/amdgpu: support for gc_info table v1.3Likun Gao3-0/+59
Add gc_info table v1.3 for IP discovery. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 875ff9a7ee8824200885384effa7743892a34ed6)
2024-08-28drm/amd/display: avoid using null object of framebufferMa Ke1-2/+7
Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Signed-off-by: Ma Ke <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)
2024-08-28drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDsAlex Deucher2-1/+2
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3575 Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 40318a2406bd426c6f4591269669c04e8eda571d)
2024-08-28drm/amd/pm: update message interface for smu v14.0.2/3Kenneth Feng2-5/+14
update message interface for smu v14.0.2/3 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 01bfabc2d1d8aaffe5268f8df0843a6d916dcbaa)
2024-08-28drm/amdgpu/swsmu: always force a state reprogram on initAlex Deucher1-6/+9
Always reprogram the hardware state on init. This ensures the PMFW state is explicitly programmed and we are not relying on the default PMFW state. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131 Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit c50fe289ed7207f71df3b5f1720512a9620e84fb) Cc: [email protected]
2024-08-28drm/amdgpu/smu13.0.7: print index for profilesAlex Deucher1-2/+2
Print the index for the profiles. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3543 Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit b86a6a57b8ad1699ba8b1c270a79678383baf632)
2024-08-28drm/amdgpu: align pp_power_profile_mode with kernel docsAlex Deucher1-4/+2
The kernel doc says you need to select manual mode to adjust this, but the code only allows you to adjust it when manual mode is not selected. Remove the manual mode check. Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit bbb05f8a9cd87f5046d05a0c596fddfb714ee457) Cc: [email protected]
2024-08-27drm/amdgpu/swsmu: always force a state reprogram on initAlex Deucher1-6/+9
Always reprogram the hardware state on init. This ensures the PMFW state is explicitly programmed and we are not relying on the default PMFW state. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131 Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amdgpu/display: remove unnecessary TODO spl_os_types.hZaeem Mohamed1-1/+0
Remove unnecessary TODO from spl_os_types.h Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amdgpu/display: SPDX copyright for spl_os_types.hZaeem Mohamed1-25/+4
Use appropriate SPDX copyright for spl_os_types.h Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amd/display: Add DSC Debug LogFangzhi Zuo3-39/+119
Add DSC log in each critical routines to facilitate debugging. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amd/display: 3.2.298Aric Cyr1-1/+1
This version brings along the following fixes: - Fix MS/MP mismatches in dml21 for dcn401 - Resolved Coverity issues - Add back quality EASF and ISHARP and dc dependency changes - Add sharpness support for windowed YUV420 video - Add improvements for text display and HDR DWM and MPO - Fix Synaptics Cascaded Panamera DSC Determination - Allocate DCN35 clock table transfer buffers in GART - Add Replay Low Refresh Rate parameters in dc type Acked-by: Leo Li <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.