aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2022-09-07drm/amdgpu: prevent toc firmware memory leakGuchun Chen1-2/+5
It's missed in psp fini. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGEYifan Zhang1-6/+0
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Xiaojian Du <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amdkfd: print address in hex format rather than decimalYifan Zhang1-1/+1
Addresses should be printed in hex format. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/display: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-0/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Wayne Lin <[email protected]> Cc: hersen wu <[email protected]> Cc: Wenjing Liu <[email protected]> Cc: Patrik Jakobsson <[email protected]> Cc: Thelford Williams <[email protected]> Cc: Fangzhi Zuo <[email protected]> Cc: Yongzhi Liu <[email protected]> Cc: Mikita Lipski <[email protected]> Cc: Jiapeng Chong <[email protected]> Cc: Bhanuprakash Modem <[email protected]> Cc: Sean Paul <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7Evan Quan1-0/+1
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_headerChengming Gui1-0/+1
Add missing structure to avoid incorrect size and version check. Signed-off-by: Chengming Gui <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-31drm/amd/amdgpu: skip ucode loading if ucode_size == 0Chengming Gui1-1/+1
Restrict the ucode loading check to avoid frontdoor loading error. Signed-off-by: Chengming Gui <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amdgpu: only init tap_delay ucode when it's included in ucode binaryHawking Zhang1-25/+35
Not all the gfx10 variants need to integrate global tap_delay and per se tap_delay firmwares Only init tap_delay ucode when it does include in rlc ucode binary so driver doesn't send a null buffer to psp for firmware loading Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Jack Gui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypassVladimir Stempen1-1/+2
[Why] On secondary display hotplug we switch primary stream from ODM2to1 to ODMBypass mode. Current logic will trigger disabling front end for this stream. [How] We need to check if prev_odm_pipe is equal to NULL in order to disable dangling planes in this scenario. Reviewed-by: Ariel Bernstein <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Vladimir Stempen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Fix check for stream and planeEthan Wellenreiter1-1/+1
[WHY] Function wasn't returning false when it had a no stream [HOW] Made it return false when it had no stream. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Ethan Wellenreiter <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Re-initialize viewport after pipe mergeEthan Wellenreiter1-0/+9
[Why] Pipes get merged in preparation for SubVP but if they don't get used, and are in ODM or some other multi pipe config, it would calculate the voltage level with a viewport of just one pipe from when they were split resulting in too low of a voltage level. [How] Made it so that the viewport and other timing settings get rebuilt and re- initialized after the pipe merge, before calculating the voltage level so it would calculate it correctly. Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Ethan Wellenreiter <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Use correct plane for CAB cursor size allocationAurabindo Pillai1-11/+21
[Why&How] plane and stream variables used for cursor size allocation calculation were stale from previous iteration. Redo the iteration to find the correct cursor plane for the calculation. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinksAlex Sierra1-1/+2
[Why] Devices with CPU XGMI iolink do not support PCIe peer access. Signed-off-by: Alex Sierra <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/pm: bump SMU 13.0.0 driver_if header versionEvan Quan2-2/+2
To suppress the warning about version mismatch with the latest 78.54.0 PMFW. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUsEvan Quan1-13/+22
For those SMU13.0.7 unsecure SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/pm: use vbios carried pptable for those supported SKUsEvan Quan3-24/+77
For some SMU13.0.0 SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: fix wrong register accessCharlene Liu2-0/+4
[why] fw version check was for release branch. for staging, it has a chance to enter wrong code path. Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: use actual cursor size instead of max for CAB allocationAurabindo Pillai1-1/+14
[Why&How] When calculating allocation for cursor size, get the real cursor through the HUBP instead of using the maximum cursor size for more optimal allocation Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: disable display fresh from MALL on an edge case for DCN321Aurabindo Pillai1-16/+27
[Why&How] When using a 4k monitor when cursor caching is not supported due to framebuffer being on an uncacheable address, enabling display refresh from MALL would trigger corruption if SS is enabled. Prevent entering SS if we are on the edge case and cursor caching is not possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the cursor size calculation out of if condition since cursor address may not be set on all platforms Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Fix CAB cursor size allocation for DCN32/321Aurabindo Pillai1-1/+1
For calculating cursor size allocation, surface size was used, resulting in over allocation Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Missing HPO instance addedLeo Chen1-0/+1
[Why & How] Number of encoder is set to 4 but only 3 instances are created. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Leo Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: set dig fifo read start level to 7 before dig fifo resetWang Fudong1-0/+5
[Why] DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black. [How] We need to set dig fifo read start level = 7 before dig fifo reset during dig fifo enable according to hardware designer's suggestion. If it is zero, it will cause underflow or overflow and DIG_FIFO_ERROR = 1. Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Wang Fudong <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctlYuBiao Wang1-1/+4
[Why] In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there is -ERESTARTSYS error. In this case, job->hw_fence could be not initialized yet. Putting hw_fence during amdgpu_job_free could lead to a use-after-free warning. [How] Check if drm_sched_job_init is performed before job_free by checking s_fence. v2: Check hw_fence.ops instead since it could be NULL if fence is not initialized. Reverse the condition since !=NULL check is discouraged in kernel. Signed-off-by: YuBiao Wang <[email protected]> Reviewed-by: Andrey Grodzovsky <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Fix OTG H timing reset for dcn314Duncan Ma1-1/+2
[Why] When ODM is enabled, H timing control register reset to 0. Div mode manual field get overwritten causing no display on certain modes for dcn314. [How] Use REG_UPDATE instead of REG_SET to set div_mode field. Reviewed-by: Charlene Liu <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Duncan Ma <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programmingGeorge Shen2-6/+6
[Why] Each index in the DPSTREAMCLK_CNTL register phyiscally maps 1-to-1 with HPO stream encoder instance. On the other hand, each index in DTBCLK_P_CNTL physically maps 1-to-1 with OTG instance. Current DCN32 DPSTREAMCLK_CLK programing assumes that OTG instance always maps 1-to-1 with HPO stream encoder instance. This is not always guaranteed and can result in blackscreen. [How] Program the correct dpstreamclk instance with the correct dtbclk_p source. Reviewed-by: Ariel Bernstein <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amdgpu: Update mes_v11_api_def.hGraham Sider2-1/+3
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps enabled). Signed-off-by: Graham Sider <[email protected]> Acked-by: Felix Kuehling <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-30drm/amdgpu: disable FRU access on special SIENNA CICHLID cardGuchun Chen1-2/+7
Below driver load error will be printed, not friendly to end user. amdgpu: ATOM BIOS: 113-D603GLXE-077 [drm] FRU: Failed to get size field [drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5 Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Kent Russell <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctlyQu Huang1-0/+1
The mmVM_L2_CNTL3 register is not assigned an initial value Signed-off-by: Qu Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: add MGCG perfmon setting for gfx11Likun Gao2-0/+18
Enable GFX11 MGCG perfmon setting. V2: set rlc to saft mode before setting. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdkfd: Fix isa version for the GC 10.3.7Prike Liang1-5/+1
Correct the isa version for handling KFD test. Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions") Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Aaron Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: Fix page table setup on ArcturusMukul Joshi1-2/+10
When translate_further is enabled, page table depth needs to be updated. This was missing on Arcturus MMHUB init. This was causing address translations to fail for SDMA user-mode queues. Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Felix Kuehling <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amd/pm: update SMU 13.0.0 driver_if headerEvan Quan2-14/+19
To fit the latest 78.53 PMFW. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: add sdma instance check for gfx11 CGCGTim Huang1-6/+12
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance, so not need to configure SDMA1_RLC_CGCG_CTRL for this case. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amd/display: enable PCON support for dcn314Roman Li1-0/+1
[Why] DCN314 supports PCON. [How] Explicitly enable it in dcn314 resources. Signed-off-by: Roman Li <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: enable NBIO IP v7.7.0 Clock GatingTim Huang1-4/+3
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: add NBIO IP v7.7.0 Clock Gating supportTim Huang1-0/+78
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-25drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0Tim Huang2-0/+15
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro definitions for AMD_CG_SUPPORT_BIF_LS. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amd/display: Include missing headerMaíra Canal2-10/+3
The file amdgpu_dm_plane.c missed the header amdgpu_dm_plane.h, which resulted on the following warning: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1046:5: warning: no previous prototype for 'fill_dc_scaling_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1222:6: warning: no previous prototype for 'handle_cursor_update' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:152:6: warning: no previous prototype for 'modifier_has_dcc' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1576:5: warning: no previous prototype for 'amdgpu_dm_plane_init' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:157:10: warning: no previous prototype for 'modifier_gfx9_swizzle_mode' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:752:5: warning: no previous prototype for 'fill_plane_buffer_attributes' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:83:31: warning: no previous prototype for 'amd_get_format_info' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:88:6: warning: no previous prototype for 'fill_blending_from_plane_state' [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:992:5: warning: no previous prototype for 'dm_plane_helper_check_state' [-Wmissing-prototypes] Therefore, include the missing header on the file and turn global functions that are not used outside of the file into static functions. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Reported-by: kernel test robot <[email protected]> Signed-off-by: Maíra Canal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amdgpu: Remove the additional kfd pre reset call for sriovshaoyunl1-2/+0
The additional call is caused by merge conflict Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: shaoyunl <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.Candice Li1-1/+2
No need to set up rb when no gfx rings. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amdgpu: fix hive reference leak when adding xgmi deviceYiPeng Chai1-0/+2
Only amdgpu_get_xgmi_hive but no amdgpu_put_xgmi_hive which will leak the hive reference. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to ↵YiPeng Chai2-1/+4
psp_hw_fini V1: The amdgpu_xgmi_remove_device function will send unload command to psp through psp ring to terminate xgmi, but psp ring has been destroyed in psp_hw_fini. V2: 1. Change the commit title. 2. Restore amdgpu_xgmi_remove_device to its original calling location. Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1Tim Huang1-2/+1
Enable GFXOFF allow control when set the GFX power gating. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-19Merge tag 'amd-drm-fixes-6.0-2022-08-17' of ↵Dave Airlie108-1184/+1758
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-08-17: amdgpu: - Revert some DML stack changes - Rounding fixes in KFD allocations - atombios vram info table parsing fix - DCN 3.1.4 fixes - Clockgating fixes for various new IPs - SMU 13.0.4 fixes - DCN 3.1.4 FP fixes - TMDS fixes for YCbCr420 4k modes - DCN 3.2.x fixes - USB 4 fixes - SMU 13.0 fixes - SMU driver unload memory leak fixes - Display orientation fix - Regression fix for generic fbdev conversion - SDMA 6.x fixes - SR-IOV fixes - IH 6.x fixes - Use after free fix in bo list handling - Revert pipe1 support - XGMI hive reset fix amdkfd: - Fix potential crach in kfd_create_indirect_link_prop() Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-08-16Revert "drm/amd/amdgpu: add pipe1 hardware support"Michel Dänzer1-1/+1
This reverts commit 4c7631800e6bf0eced08dd7b4f793fcd972f597d. Triggered GFX hangs with GNOME Wayland on Navi 21. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117 Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutexMaíra Canal1-6/+2
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the bo_list_mutex inside the function amdgpu_cs_vm_handling and again on amdgpu_cs_parser_fini. This problem results in the following use-after-free problem: [ 220.280990] ------------[ cut here ]------------ [ 220.281000] refcount_t: underflow; use-after-free. [ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 220.281029] ------------[ cut here ]------------ [ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 [ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022 [ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de 7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a 6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48 c7 [ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282 [ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000 [ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff [ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930 [ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400 [ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003 [ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000 [ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0 [ 220.281480] Call Trace: [ 220.281485] <TASK> [ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu] [ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282028] drm_ioctl_kernel+0xa4/0x150 [ 220.282043] drm_ioctl+0x21f/0x420 [ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282275] ? lock_release+0x14f/0x460 [ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu] [ 220.282534] __x64_sys_ioctl+0x90/0xd0 [ 220.282545] do_syscall_64+0x5b/0x80 [ 220.282551] ? futex_wake+0x6c/0x150 [ 220.282568] ? lock_is_held_type+0xe8/0x140 [ 220.282580] ? do_syscall_64+0x67/0x80 [ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282592] ? do_syscall_64+0x67/0x80 [ 220.282597] ? do_syscall_64+0x67/0x80 [ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.282616] RIP: 0033:0x7f8282a4f8bf [ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf [ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018 [ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0 [ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444 [ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003 [ 220.282689] </TASK> [ 220.282693] irq event stamp: 6232311 [ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70 [ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70 [ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282716] softirqs last disabled at (6232061): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282722] ---[ end trace 0000000000000000 ]--- Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle the unlock. Fixes: 90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2") Reported-by: Mikhail Gavrilov <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Melissa Wen <[email protected]> Signed-off-by: Maíra Canal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: Fix interrupt handling on ih_soft ringMukul Joshi3-3/+18
There are no backing hardware registers for ih_soft ring. As a result, don't try to access hardware registers for read and write pointers when processing interrupts on the IH soft ring. Signed-off-by: Mukul Joshi <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: Add secure display TA load for RenoirShane Xiao1-0/+10
Add secure display TA load for Renoir Signed-off-by: Shane Xiao <[email protected]> Reviewed-by: Aaron Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: Include scaling factor for SubVP commandAlvin Lee4-1/+36
[Description] For SubVP scaling cases, we must include the scaling info as part of the cmd. This is required when converting OTG line to HUBP line for the MALL_START_LINE programming. Reviewed-by: Jun Lei <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu/vcn: Return void from the stop_dbg_modeKhalid Masum1-3/+2
There is no point in returning an int here. It only returns 0 which the caller never uses. Therefore return void and remove the unnecessary assignment. Addresses-Coverity: 1504988 ("Unused value") Fixes: 8da1170a16e4 ("drm/amdgpu: add VCN4 ip block support") Reviewed-by: Ruijing Dong <[email protected]> Suggested-by: Ruijing Dong <[email protected]> Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Khalid Masum <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.