aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2018-08-24Merge tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds32-141/+154
Pull drm fixes from Dave Airlie: "Just a couple of fixes" One MAINTAINERS address change, two panels fixes, and set of amdgpu fixes (build fixes, display fixes and some others)" * tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm: drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80 drm/amd/display: Don't build DCN1 when kcov is enabled Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86" drm/amdgpu/display: disable eDP fast boot optimization on DCE8 drm/amdgpu: fix amdgpu_amdkfd_remove_eviction_fence v3 drm/amdgpu: fix incorrect use of drm_file->pid drm/amdgpu: fix incorrect use of fcheck drm/powerplay: enable dpm under pass-through drm/amdgpu: access register without KIQ drm/amdgpu: set correct base for THM/NBIF/MP1 IP drm/amd/display: fix dentist did ranges drm/amd/display: make dp_ss_off optional drm/amd/display: fix dp_ss_control vbios flag parsing drm/amd/display: Do not retain link settings MAINTAINERS: drm-misc: Change seanpaul's email address drm/panel: simple: tv123wam: Add unprepare delay
2018-08-22mm, oom: distinguish blockable mode for mmu notifiersMichal Hocko1-8/+35
There are several blockable mmu notifiers which might sleep in mmu_notifier_invalidate_range_start and that is a problem for the oom_reaper because it needs to guarantee a forward progress so it cannot depend on any sleepable locks. Currently we simply back off and mark an oom victim with blockable mmu notifiers as done after a short sleep. That can result in selecting a new oom victim prematurely because the previous one still hasn't torn its memory down yet. We can do much better though. Even if mmu notifiers use sleepable locks there is no reason to automatically assume those locks are held. Moreover majority of notifiers only care about a portion of the address space and there is absolutely zero reason to fail when we are unmapping an unrelated range. Many notifiers do really block and wait for HW which is harder to handle and we have to bail out though. This patch handles the low hanging fruit. __mmu_notifier_invalidate_range_start gets a blockable flag and callbacks are not allowed to sleep if the flag is set to false. This is achieved by using trylock instead of the sleepable lock for most callbacks and continue as long as we do not block down the call chain. I think we can improve that even further because there is a common pattern to do a range lookup first and then do something about that. The first part can be done without a sleeping lock in most cases AFAICS. The oom_reaper end then simply retries if there is at least one notifier which couldn't make any progress in !blockable mode. A retry loop is already implemented to wait for the mmap_sem and this is basically the same thing. The simplest way for driver developers to test this code path is to wrap userspace code which uses these notifiers into a memcg and set the hard limit to hit the oom. This can be done e.g. after the test faults in all the mmu notifier managed memory and set the hard limit to something really small. Then we are looking for a proper process tear down. [[email protected]: coding style fixes] [[email protected]: minor code simplification] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michal Hocko <[email protected]> Acked-by: Christian König <[email protected]> # AMD notifiers Acked-by: Leon Romanovsky <[email protected]> # mlx and umem_odp Reported-by: David Rientjes <[email protected]> Cc: "David (ChunMing) Zhou" <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Alex Deucher <[email protected]> Cc: David Airlie <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Doug Ledford <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Mike Marciniszyn <[email protected]> Cc: Dennis Dalessandro <[email protected]> Cc: Sudeep Dutt <[email protected]> Cc: Ashutosh Dixit <[email protected]> Cc: Dimitri Sivanich <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: "Jérôme Glisse" <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Felix Kuehling <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-08-21drm/amd/display: Don't build DCN1 when kcov is enabledLeo (Sunpeng) Li1-5/+3
DCN1 contains code that utilizes fp math. When CONFIG_KCOV_INSTRUMENT_ALL and CONFIG_KCOV_ENABLE_COMPARISONS are enabled, build errors are found. See this earlier patch for details: https://lists.freedesktop.org/archives/dri-devel/2018-August/186131.html As a short term solution, disable CONFIG_DRM_AMD_DC_DCN1_0 when KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS are enabled. In addition, make it a fully derived config, taking into account CONFIG_X86. Acked-by: Alex Deucher <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"Leo (Sunpeng) Li26-58/+64
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0. We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math. Acked-by: Alex Deucher <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amdgpu/display: disable eDP fast boot optimization on DCE8Alex Deucher1-1/+7
Seems to cause blank screens. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=106940 Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amdgpu: fix amdgpu_amdkfd_remove_eviction_fence v3Christian König1-57/+46
Fix quite a number of bugs here. Unfortunately only compile tested. v2: fix copy&paste error v3: fix 80 chars issue in comment Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amdgpu: fix incorrect use of drm_file->pidChristian König1-15/+4
That's the PID of the creator of the file (usually the X server) and not the end user of the file. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> CC: [email protected]
2018-08-21drm/amdgpu: fix incorrect use of fcheckChristian König1-1/+3
The usage isn't RCU protected. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> CC: [email protected]
2018-08-21drm/powerplay: enable dpm under pass-throughYintian Tao1-1/+3
Repeat enable dpm under pass-through because there is no actually hardware-fini and real power-off when guest vm shutdown or reboot. Otherwise, under pass-through it will be failed to populate populate and upload SCLK MCLK DPM levels due to zero of pcie_speed_table.count. Signed-off-by: Yintian Tao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amdgpu: access register without KIQYintian Tao1-2/+2
there is no need to access register such as mmSMC_IND_INDEX_11 and mmSMC_IND_DATA_11 through KIQ because they are VF-copy. Signed-off-by: Yintian Tao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amdgpu: set correct base for THM/NBIF/MP1 IPEvan Quan1-0/+3
Set correct address base for vega20. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amd/display: fix dentist did rangesDmytro Laktyushkin1-2/+8
Dentist did ranges were incomplete as max setting has an unusual divider step up of 66. Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amd/display: make dp_ss_off optionalDmytro Laktyushkin2-3/+4
dp_ss_off flag doesn't need to be set, so we create a link_init function if it is needed by an asic Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Bernstein <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amd/display: fix dp_ss_control vbios flag parsingDmytro Laktyushkin1-1/+1
dp_ss_control = 0 means ss is off, we had a typo where we would double not dp_ss_control while setting dp_ss_off flag Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Bernstein <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-21drm/amd/display: Do not retain link settingsSamson Tam1-2/+13
Do not retrain link settings if lane count and link rate are both unknown. Causes driver to be stuck reading VBIOS register after removing emulated connection. Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-16drm/amdgpu: Use kvmalloc for allocating UVD/VCE/VCN BO backup memoryMichel Dänzer3-8/+8
The allocated size can be (at least?) as large as megabytes, and there's no need for it to be physically contiguous. May avoid spurious failures to initialize / suspend the corresponding block while there's memory pressure. Bugzilla: https://bugs.freedesktop.org/107432 Reviewed-by: Christian König <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amd/display: Guard against null crtc in CRC IRQNicholas Kazlauskas1-2/+8
[Why] A null pointer deference can occur if crtc is null in amdgpu_dm_crtc_handle_crc_irq. This can happen if get_crtc_by_otg_inst returns NULL during dm_crtc_high_irq, leading to a hang in some IGT test cases. [How] Check that CRTC is non-null before accessing its fields. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Sun peng Li <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amd/display: Pass connector id when executing VBIOS CTMikita Lipski1-2/+2
[why] Older ASICs require both phys_id and connector_id to execute bios command table. If we are not passing the right connector_id - it can lead to a black screen. [how] Set connector_obj_id when executing vbios command table Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amd/display: Check if clock source in use before disablingMikita Lipski3-15/+40
[why] We are disabling clock source while other pipes are still using it, because we don't verify the number of pipes that share it. [how] - Adding a function in resources to return the number of pipes sharing the clock source. - Checking that no one is sharing the clock source before disabling Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amd/display: Allow clock sharing b/w HDMI and DVIMikita Lipski1-2/+2
[why] HDMI and DVI share the same PHY clock and single link DVI and HDMI both use 4 lanes, so they should be allowed to be sharing the same clock source if all other parameters are satisfied. [how] Change a check for general DVI to Dual DVI. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amd/display: Fix warning observed in mode change on VegaJerry (Fangzhi) Zuo1-1/+1
[Why] DOUBLE_BUFFER_EN bit is getting cleared before enable blanking. That leads to CRTC_BLANK_DATA_EN is getting updated immediately. [How] Get DOUBLE_BUFFER_EN bit set, the same as DCE110. Signed-off-by: Jerry (Fangzhi) Zuo <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amd/display: fix single link DVI has no displayCharlene Liu1-0/+2
Signed-off-by: Charlene Liu <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amdgpu/vce: VCE entity initialization relies on ring initializtionEmily Deng5-10/+34
Entity init should after ring init, as the entity's sched_rq's initialization is in ring init. SWDEV-161495 Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amdgpu/uvd: UVD entity initialization relys on ring initializationEmily Deng6-9/+39
Entity init should after ring init, as the entity's sched_rq's initialization is in ring init. SWDEV-161495 Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-13drm/amdgpu:add VCN booting with firmware loaded by PSPLikun Gao2-16/+41
Setup psp firmware loading for VCN, and make VCN block booting from tmr mac address. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amdgpu:add VCN support in PSP driverLikun Gao1-0/+3
Add VCN support in PSP driver Signed-off-by: James Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amdgpu:add new firmware id for VCNLikun Gao1-0/+1
Add the new firmware id for VCN into the enum Signed-off-by: James Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amdgpu: update tmr mc addressJames Zhu1-0/+5
Update tmr mc address with firmware loading address which is returned from PSP firmware Signed-off-by: James Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-13drm/amdgpu:add tmr mc address into amdgpu_firmware_infoJames Zhu1-0/+3
amdgpu IP blocks booting need Trust Memory Region(tmr) mc address of its firmware which is loaded by PSP Signed-off-by: James Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-10Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie20-61/+177
into drm-next More fixes for 4.19: - Fixes for scheduler - Fix for SR-IOV - Fixes for display Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-08-09drm/amdgpu/sriov: give 8s for recover vram under RUNTIMEEmily Deng1-1/+1
Extend the timeout for recovering vram bos from shadows on sr-iov to cover the worst case scenario for timeslices and VFs Under runtime, the wait fence time could be quite long when other VFs are in exclusive mode. For example, for 4 VF, every VF's exclusive timeout time is set to 3s, then the worst case is 9s. If the VF number is more than 4,then the worst case time will be longer. The 8s is the test data, with setting to 8s, it will pass the TDR test for 1000 times. SWDEV-161490 Signed-off-by: Monk Liu <[email protected]> Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-08Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie42-552/+723
into drm-next Fixes for 4.19: - Fix UVD 7.2 instance handling - Fix UVD 7.2 harvesting - GPU scheduler fix for when a process is killed - TTM cleanups - amdgpu CS bo_list fixes - Powerplay fixes for polaris12 and CZ/ST - DC fixes for link training certain HMDs - DC fix for vega10 blank screen in certain cases From: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-08-06drm/amd/display: display connected to dp-1 does not light upHersen Wu3-0/+7
[why] for vega, dp set_panel_mode is handled by psp firmware. dal should not program the register again. [how] dal does not program panel mode. Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: update clk for various HDMI color depthsMikita Lipski1-0/+18
[why] When programming tonga's connector's backend we didn't take in account that HDMI's colour depth might be more than 8bpc therefore we need to add a switch statement that would adjust the pixel clock accordingly. [how] Add a switch statement updating clock by its appropriate coefficient. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-06drm/amd/display: program display clock on cache matchDmytro Laktyushkin2-1/+5
[Why] We seem to have an issue where high enough display clock will not get set properly during S3 resume if we only call vbios once [How] Expand condition of display clock programming to happen even when cached display clock matches requested display clock Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Add NULL check for enabling dp ssNicholas Kazlauskas1-1/+3
[Why] The pointer for integrated_info can be NULL which causes the system to do a null pointer deference and hang on boot. [How] Add a check to ensure that integrated_info is not null before enabling DP ss. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Sun peng Li <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: add vbios table check for enabling dp ssDmytro Laktyushkin4-1/+8
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Bernstein <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Don't share clk source between DP and HDMIMikita Lipski4-2/+26
[why] Prevent clock source sharing between HDMI and DP connectors. DP shouldn't be sharing its ref clock with phy clock, which caused an issue of older ASICS booting up with multiple diplays plugged in. [how] Add an extra check that would prevent HDMI and DP sharing clk. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-06drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on CarrizoHersen Wu3-5/+6
[why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Use calculated disp_clk_khz value for dce110Nicholas Kazlauskas2-4/+4
[Why] The calculated values for actual disp_clk_khz were ignored when notifying pplib of the new display requirements. In order to honor DFS bypass clocks from the hardware, the calculated value should be used. [How] The return value for set_dispclk is now assigned back into new_clocks and correctly carried through into dccg->clks.phyclk_khz. When notifying pplib of new display requirements dccg->clks.phyclk_khz is used instead of dce.dispclk_khz. The value of dce.dispclk_khz was never explicitly set to anything before. A 15% higher display clock value than calculated is no longer requested for dce110 since it now makes use of the calculated value. Since dce112 makes use of dce110's set_bandwidth but not its update_clocks it needs to have the value correctly carried through. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Implement custom degamma lut on dcnDavid Francis4-15/+46
[Why] Custom degamma lut functions are a feature we would like to support on compatible hardware [How] In atomic check, convert from array of drm_color_lut to dc_transfer_func. On hardware commit, allow for possibility of custom degamma. Both are based on the equivalent regamma pipeline. Signed-off-by: David Francis <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Destroy aux_engines only onceDavid Francis1-3/+0
[Why] In the dce112 function to destroy the resource pool, engines (the aux engines) is destroyed twice. This has no ill effects but is a tad redundant. [How] Remove the redundant call Signed-off-by: David Francis <[email protected]> Reviewed-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Read back max backlight value at bootDavid Francis1-0/+1
[Why] If there is no program explicitly setting the backlight brightness (for example, during a minimal install of linux), the hardware defaults to maximum brightness but the backlight_device defaults to 0 value. Thus, settings displays the wrong brightness value. [How] When creating the backlight device, set brightness to max Signed-off-by: David Francis <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Implement backlight_ops.get_brightnessDavid Francis3-1/+17
[Why] This hook that is supposed to read the actual backlight value is used in a few places throughout the kernel to setup or force update on backlight [How] Create a dc function that calls the existing abm function, and call that function from amdgpu Signed-off-by: David Francis <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: DP Compliance 400.1.1 failureabdoulaye berthe1-26/+28
[Why] 400.1.1 is failing because we are not performing link training when we get an HPD pulse for the same display. This is breaking DP compliance [How] Always perform link training after HPD pulse if the detection reason is not DETECT_REASON_HPDRX. Signed-off-by: abdoulaye berthe <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-06drm/amd/display: Use requested HDMI aspect ratioLeo (Sunpeng) Li1-7/+2
[Why] The DRM mode's HDMI picture aspect ratio field was never saved in dc_stream's timing struct. This causes us to mistake a new stream to have the same timings as the old, even though the user has requested a different aspect ratio. [How] Save DRM's aspect ratio field within dc_stream's timing struct. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107153 Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Mikita Lipski <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-08-03drm/amd/display: Only require EDID read for HDMI and DVIHarry Wentland1-1/+2
[Why] VGA sometimes has trouble retrieving the EDID on very long cables, KVM switches, or old displays. [How] Only require EDID read for HDMI and DVI and exempt other types (DP, VGA). We currently don't support VGA but if anyone adds support in the future this might get overlooked. Signed-off-by: Harry Wentland <[email protected]> Suggested-by: Michel Dänzer <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-08-03drm/amd/display: Report non-DP display as disconnected without EDIDHarry Wentland1-0/+11
[Why] Some boards seem to have a problem where HPD is high on HDMI even though no display is connected. We don't want to report these as connected. DP spec still requires us to report DP displays as connected when HPD is high but we can't read the EDID in order to go to fail-safe mode. [How] If connector_signal is not DP abort detection if we can't retrieve the EDID. v2: Add Bugzilla and stable Bugzilla: https://bugs.freedesktop.org/107390 Bugzilla: https://bugs.freedesktop.org/106846 Cc: [email protected] Signed-off-by: Harry Wentland <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-31drm/amdgpu/pm: Fix potential Spectre v1Gustavo A. R. Silva1-1/+2
idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:408 amdgpu_set_pp_force_state() warn: potential spectre issue 'data.states' Fix this by sanitizing idx before using it to index data.states Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: [email protected] Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-31drm/amd/display: add missing void parameter to dc_create_transfer_funcColin Ian King1-1/+1
Add a missing void parameter to function dc_create_transfer_func, fixes sparse warning: warning: non-ANSI function declaration of function 'dc_create_transfer_func' Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.