aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu1-0/+3
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan3-5/+18
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <[email protected]> Acked-by: Guchun Chen <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas1-0/+5
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas1-0/+1
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YCMario Limonciello1-0/+3
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-14drm/amdgpu: don't override default ECO_BITs settingHawking Zhang8-9/+0
Leave this bit as hardware default setting Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-14drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma1-2/+2
should count on GC IP base address Signed-off-by: Le Ma <[email protected]> Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-08drm/amd/display: prevent reading unitialized linksMikita Lipski1-0/+2
[why/how] The function can be called on boot or after suspend when links are not initialized, to prevent it guard it with NULL pointer check Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Mikita Lipski <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-08drm/amd/display: Fix DPIA outbox timeout after S3/S4/resetNicholas Kazlauskas1-1/+6
[Why] The HW interrupt gets disabled after S3/S4/reset so we don't receive notifications for HPD or AUX from DMUB - leading to timeout and black screen with (or without) DPIA links connected. [How] Re-enable the interrupt after S3/S4/reset like we do for the other DC interrupts. Guard both instances of the outbox interrupt enable or we'll hang during restore on ASIC that don't support it. Fixes: 6eff272dbee7ad ("drm/amd/display: Fix DPIA outbox timeout after GPU reset") Reviewed-by: Jude Shih <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdkfd: process_info lock not needed for svmPhilip Yang1-9/+0
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms and userptr valid/inval list, svm_range_restore_work and svm_range_set_attr don't access those, so do not need to take process_info lock. This will avoid potential circular locking issue. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: adjust the kfd reset sequence in reset sriov functionshaoyunl1-4/+8
This change revert previous commits: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") This change moves the amdgpu_amdkfd_pre_reset to an earlier place in amdgpu_device_reset_sriov, presumably to address the sequence issue that the first patch was originally meant to fix. Some register access(GRBM_GFX_CNTL) only be allowed on full access mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov function. Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: add connector type check for CRC source setPerry Yuan1-0/+8
[Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdkfd: fix double free mem structurePhilip Yang1-3/+5
drm_gem_object_put calls release_notify callback to free the mem structure and unreserve_mem_limit, move it down after the last access of mem and make it conditional call. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdkfd: set "r = 0" explicitly before gotoPhilip Yang1-0/+4
To silence the following Smatch static checker warning: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615 svm_range_restore_pages() warn: missing error code here? 'get_task_mm()' failed. 'r' = '0' Signed-off-by: Philip Yang <[email protected]> Suggested-by: Dan Carpenter <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Add work around for tunneled MST.Jimmy Kizito4-11/+30
[Why] Certain USB4 docks do not seem to be able to handle disabling DSC once it has been enabled on an MST stream. This can result in blank displays. [How] As a work around, always enable DSC on docks exhibiting this issue. The flag to indicate the use of DSC for MST streams on a USB4 dock is set during detection of the dock and only cleared when the USB4 dock is disconnected. Reviewed-by: Jun Lei <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Jimmy Kizito <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Fix for the no Audio bug with Tiled DisplaysMustapha Ghaddar1-0/+4
[WHY] It seems like after a series of plug/unplugs we end up in a situation where tiled display doesnt support Audio. [HOW] The issue seems to be related to when we check streams changed after an HPD, we should be checking the audio_struct as well to see if any of its values changed. Reviewed-by: Jun Lei <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Mustapha Ghaddar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Clear DPCD lane settings after repeater trainingShen, George1-1/+1
[Why] VS and PE requested by repeater should not persist for the sink. [How] Clear DPCD lane settings after repeater link training finishes. Reviewed-by: Wesley Chalmers <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Allow DSC on supported MST branch devicesNicholas Kazlauskas1-4/+16
[Why] When trying to lightup two 4k60 non-DSC displays behind a branch device that supports DSC we can't lightup both at once due to bandwidth limitations - each requires 48 VCPI slots but we only have 63. [How] The workaround already exists in the code but is guarded by a CONFIG that cannot be set by the user and shouldn't need to be. Check for specific branch device IDs to device whether to enable the workaround for multiple display scenarios. Reviewed-by: Hersen Wu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-01drm/amdgpu: Don't halt RLC on GFX suspendLijo Lazar2-4/+5
On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend and keep it running till PMFW disables all DPMs. [ 578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin! [ 583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features. [ 583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features! [ 583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 583.248504] [drm] free PSP TMR buffer Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: fix the missed handling for SDMA2 and SDMA3Guchun Chen1-0/+2
There is no base reg offset or ip_version set for SDMA2 and SDMA3 on SIENNA_CICHLID, so add them. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: check atomic flag to differeniate with legacy pathFlora Cui1-2/+2
since vkms support atomic KMS interface Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: cancel the correct hrtimer on exitFlora Cui1-2/+2
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLIDJane Jian3-0/+3
[WHY] for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature), which will be mismatched with original vcn0 revision [HOW] add new version check for vcn0 disabled revision(3, 0, 192), typically modified under sriov mode Signed-off-by: Jane Jian <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amd/display: update bios scratch when setting backlightAlex Deucher3-0/+18
Update the bios scratch register when updating the backlight level. Some platforms apparently read this scratch register and do additional operations in their hotkey handlers. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1518 Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu/pm: fix powerplay OD interfaceAlex Deucher6-79/+67
The overclocking interface currently appends data to a string. Revert back to using sprintf(). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774 Fixes: 6db0c87a0a8ee1 ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit") Acked-by: Evan Quan <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-11-24drm/amdgpu: Skip ASPM programming on aldebaranLijo Lazar1-0/+3
There is no need for additional programming, keep the default settings. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: fix byteorder error in amdgpu discoveryYang Wang1-6/+6
fix some byteorder issues about amdgpu discovery. This will result in running errors on the big end system. (e.g:MIPS) Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: enable Navi retry fault wptr overflowPhilip Yang1-21/+12
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1 will be full quickly. IH cannot receive other interrupts, this causes deadlock if migrating buffer using sdma and waiting for sdma done while handling retry fault. Remove VMC from IH storm client, enable ring1 write pointer overflow, then IH will drop retry fault interrupts and be able to receive other interrupts while driver is handling retry fault. IH ring1 write pointer doesn't writeback to memory by IH, and ring1 write pointer recorded by self-irq is not updated, so always read the latest ring1 write pointer from register. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: enable Navi 48-bit IH timestamp counterPhilip Yang1-0/+1
By default this timestamp is 32 bit counter. It gets overflowed in around 10 minutes. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdkfd: simplify drain retry faultPhilip Yang2-9/+23
unmap range always increase atomic svms->drain_pagefaults to simplify both parent range and child range unmap, page fault handle ignores the retry fault if svms->drain_pagefaults is set to speed up interrupt handling. svm_range_drain_retry_fault restart draining if another range unmap from cpu. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdkfd: handle VMA remove racePhilip Yang1-9/+13
VMA may be removed before unmap notifier callback, and deferred list work remove range, return success for this special case as we are handling stale retry fault. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdkfd: process exit and retry fault racePhilip Yang1-27/+36
kfd_process_wq_release drain retry fault to ensure no retry fault comes after removing kfd process from the hash table, otherwise svm page fault handler will fail to recover the fault and dump GPU vm fault log. Refactor deferred list work to get_task_mm and take mmap write lock to handle all ranges, and avoid mm is gone while inserting mmu notifier. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: IH process reset count when restartPhilip Yang1-1/+2
Otherwise when IH process restart, count is zero, the loop will not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS interrupts. Cc: [email protected] Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu/gfx9: switch to golden tsc registers for renoir+Alex Deucher1-11/+35
Renoir and newer gfx9 APUs have new TSC register that is not part of the gfxoff tile, so it can be read without needing to disable gfx off. Acked-by: Luben Tuikov <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as wellAlex Deucher1-2/+13
Apply the same check we do for dGPUs for APUs as well. Acked-by: Luben Tuikov <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: move kfd post_reset out of reset_sriov functionshaoyunl1-4/+3
Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") For sriov XGMI configuration, the host driver will handle the hive reset, so in guest side, the reset_sriov only be called once on one device. This will make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov function to make them balance . Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amd/display: Fixed DSC would not PG after removing DSC streamYi-Ling Chen3-3/+3
[WHY] Due to pass the wrong parameter down to the enable_stream_gating(), it would cause the DSC of the removing stream would not be PG. [HOW] To pass the correct parameter down th the enable_stream_gating(). Reviewed-by: Anthony Koo <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Yi-Ling Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amd/display: Reset link encoder assignments for GPU resetNicholas Kazlauskas1-0/+14
[Why] A warning appears in the log on GPU reset for link_enc_cfg_link_encs_assign for the following condition: ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false); This is not expected behavior and may result in link encoders being incorrectly assigned. [How] The dc->current_state is backed up into dm->cached_dc_state before we commit 0 streams. DC will clear link encoder assignments on the real state but the changes won't propagate over to the copy we made before the 0 streams commit. DC expects that link encoder assignments are *not* valid when committing a state, so as a workaround it needs to be cleared before passing it back into DC. Reviewed-by: Harry Wentland <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amd/display: Set plane update flags for all planes in resetNicholas Kazlauskas1-2/+2
[Why] We're only setting the flags on stream[0]'s planes so this logic fails if we have more than one stream in the state. This can cause a page flip timeout with multiple displays in the configuration. [How] Index into the stream_status array using the stream index - it's a 1:1 mapping. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Reviewed-by: Harry Wentland <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amd/display: Fix DPIA outbox timeout after GPU resetNicholas Kazlauskas1-0/+2
[Why] The HW interrupt gets disabled after GPU reset so we don't receive notifications for HPD or AUX from DMUB - leading to timeout and black screen with (or without) DPIA links connected. [How] Re-enable the interrupt after GPU reset like we do for the other DC interrupts. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Reviewed-by: Jude Shih <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: Fix double free of dmabufxinhui pan1-6/+0
amdgpu_amdkfd_gpuvm_free_memory_of_gpu drop dmabuf reference increased in amdgpu_gem_prime_export. amdgpu_bo_destroy drop dmabuf reference increased in amdgpu_gem_prime_import. So remove this extra dma_buf_put to avoid double free. Signed-off-by: xinhui pan <[email protected]> Tested-by: Felix Kuehling <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-24drm/amdgpu: Fix MMIO HDP flush on SRIOVFelix Kuehling7-8/+28
Disable HDP register remapping on SRIOV and set rmmio_remap.reg_offset to the fixed address of the VF register for hdp_v*_flush_hdp. Signed-off-by: Felix Kuehling <[email protected]> Tested-by: Bokun Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-17drm/amd/amdgpu: fix potential memleakBernard Zhao1-0/+1
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Bernard Zhao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-17drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered againshaoyunl1-0/+5
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-17drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUsPerry Yuan4-2/+74
add support that allow the userspace tool like RGP to get the GFX clock value at runtime, the fix follow the old way to show the min/current/max clocks level for compatible consideration. === Test === $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz * 1: 1100Mhz 2: 1600Mhz then run stress test on one APU system. $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz 1: 1040Mhz * 2: 1600Mhz The current GFXCLK value is updated at runtime. BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260 Reviewed-by: Huang Ray <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-11-17drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga ↵hongao1-0/+1
and dvi connectors amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by: hongao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-11-17drm/amd/display: Fix OLED brightness control on eDPRoman Li1-1/+2
[Why] After commit ("drm/amdgpu/display: add support for multiple backlights") number of eDPs is defined while registering backlight device. However the panel's extended caps get updated once before register call. That leads to regression with extended caps like oled brightness control. [How] Update connector ext caps after register_backlight_device Fixes: 7fd13baeb7a3a4 ("drm/amdgpu/display: add support for multiple backlights") Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/ Signed-off-by: Roman Li <[email protected]> Tested-by: Samuel Čavoj <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Jasdeep Dhillon <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-11-17drm/amd/pm: Remove artificial freq level on Navi1xLijo Lazar1-5/+8
Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-11-17drm/amd/pm: avoid duplicate powergate/ungate settingEvan Quan4-1/+23
Just bail out if the target IP block is already in the desired powergate/ungate state. This can avoid some duplicate settings which sometimes may cause unexpected issues. Link: https://lore.kernel.org/all/[email protected]/ Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789 Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Signed-off-by: Evan Quan <[email protected]> Tested-by: Borislav Petkov <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-11-17drm/amdgpu: add error print when failing to add IP block(v2)Guchun Chen1-0/+36
Driver initialization is driven by IP version from IP discovery table. So add error print when failing to add ip block during driver initialization, this will be more friendly to user to know which IP version is not correct. [ 40.467361] [drm] host supports REQ_INIT_DATA handshake [ 40.474076] [drm] add ip block number 0 <nv_common> [ 40.474090] [drm] add ip block number 1 <gmc_v10_0> [ 40.474101] [drm] add ip block number 2 <psp> [ 40.474103] [drm] add ip block number 3 <navi10_ih> [ 40.474114] [drm] add ip block number 4 <smu> [ 40.474119] [drm] add ip block number 5 <amdgpu_vkms> [ 40.474134] [drm] add ip block number 6 <gfx_v10_0> [ 40.474143] [drm] add ip block number 7 <sdma_v5_2> [ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init [ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device. v2: use dev_err to multi-GPU system Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.