Age | Commit message (Collapse) | Author | Files | Lines |
|
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Nevenko Stupar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to
DMUB just remove the function pointer.
[how]
Remove apply_idle_power_optimizations from function pointers structure
for DCN31
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Mikita Lipski <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Camille Cho <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.
Put in a hardcoded default until we have the interface in place.
Reviewed-by: Eric Yang <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.
In the case where the hardcode is also missing we can't lightup display.
[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: Eric Yang <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.
[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Bindu Ramamurthy <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.
Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.
An example of such a timing would be 640x480@72Hz:
h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000
[How]
Include borders as part of destination vactive/hactive.
This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.
Most modes do not have vertical or horizontal borders.
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Eric Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.
[how]
Correct "<" to "<="
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Reviewed-by: Yongqiang Sun <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Victor Lu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Add reserved bits for future feature development
- Fix issue with mismatch with type const
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Anthony Koo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This tends to take miliseconds in certain scenarios and we'd rather not
wait that long. Due to how this interacts with det size update and
locking waiting should not be necessary as compbuf updates before
unlock.
Add a watch for config error instead as that is something we actually do
care about.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Dmytro Laktyushkin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Reserve padding bytes for new feature implementation
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Ian Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Eric Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Extend existing state collection functions to add some additional
registers useful for debug, and add state collection function for DC
hubbub
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Josip Pavic <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
Lowering clocks when entering S2 Idle state causes DMUB to hang with
Diags.
[how]
Do not enter S2 optimization with Diags on dcn301 to prevent DMUB hang.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Mikita Lipski <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
The units of the time_per_pixel variable were incorrect, this had to be
changed for the code to properly function.
[how]
The change was very straightforward, only required one line of code to
be changed where the calculation was done.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Oliver Logush <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
The current logic checks if there's an upper pipe whose viewport
completely covers the current pipe viewport.
This fails in pipe splitting case as you can have layer 1 pipe that
crosses the two layer 0 pipes where it's contained in both, but neither
covers it completely, hence we allow the cursor on both layers.
[How]
Instead of trying to "sum up" rectangles from the higher level pipes
which could leave gaps and would not work generically, we will assume if
there's an upper layer that is active, it will control the HW cursor.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Krunoslav Kovac <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
currently dc has never reset this dpcd_cap.dpcd_rev.
[how]
ideally we should reset this before redo detection.
change the passive dongle only for now to reduce the impact.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The VGA arbitration is entirely based on pci_dev structures, so just pass
that back to the set_vga_decode callback.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
All callers pass NULL as the irq_set_state argument, so remove it and
the ->irq_set_state member in struct vga_device.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
Add a trivial wrapper for the unregister case that sets all fields to
NULL.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <[email protected]>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <[email protected]>" [expired]
# gpg: aka "Maarten Lankhorst <[email protected]>" [expired]
# gpg: aka "Maarten Lankhorst <[email protected]>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at
30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over
DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken
image that looks like it has an effective resolution of 1920x1080 but
scaled up in an irregular way. Reverting the commit or applying this
patch fixes the problem on v5.14-rc1.
Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.")
Acked-by: Mario Kleiner <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update the version to 0xD for beige_goby.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Jack Gui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update gc_10_3_4 golden setting.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Update GFX golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
This patch is to update the golden setting for vangogh.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Optimized the code for codec info structure initialization
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Added the supported codecs in the video capabilities query.
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at
30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over
DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken
image that looks like it has an effective resolution of 1920x1080 but
scaled up in an irregular way. Reverting the commit or applying this
patch fixes the problem on v5.14-rc1.
Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.")
Acked-by: Mario Kleiner <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
1. using vram aper to access vram if possible
2. avoid MM_INDEX/MM_DATA is not working when mmio protect feature is
enabled.
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
using exiting function to replace duplicate code blocks in
amdgpu_ttm_vram_write().
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
split amdgpu_device_access_vram()
1. amdgpu_device_mm_access(): using MM_INDEX/MM_DATA to access vram
2. amdgpu_device_aper_access(): using vram aperature to access vram (option)
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Don't populate the const array common_rates on the stack but instead it
static. Makes the object code smaller by 80 bytes:
Before:
text data bss dec hex filename
268019 98322 256 366597 59805 ../display/amdgpu_dm/amdgpu_dm.o
After:
text data bss dec hex filename
267843 98418 256 366517 597b5 ../display/amdgpu_dm/amdgpu_dm.o
Reduction of 80 bytes
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update the version to 0xD for beige_goby.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Jack Gui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update gc_10_3_4 golden setting.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update GFX golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to update the golden setting for vangogh.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For the unknown CEA parse case on DMUB-enabled ASICs, dmesg will
print an error message like below, this will be captured by
automation tools as it has the word like ERROR during boot up
and treated as a false error, as it does not break bootup process.
So use DRM_WARN printing for this.
[drm:amdgpu_dm_update_freesync_caps [amdgpu]] *ERROR* Unknown EDID CEA parser results
v2: Use DRM_WARN to print such info.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Stylon Wang <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add USBC PD FW implementation here to be used with relevant ASICs.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Alexander Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
System memory-based implementation for updating the
USBCPD is deprecated for so switching
to LFB based implementation for all the ASICs.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Alexander Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Optimized the code for codec info structure initialization
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Added the supported codecs in the video capabilities query.
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
KFD Thunk maps invisible VRAM BOs with PROT_NONE, MAP_PRIVATE.
is_cow_mapping returns true for these mappings, which causes mmap to fail
in ttm_bo_mmap_obj.
As a workaround, clear VM_MAYWRITE for PROT_NONE-COW mappings. This
should prevent the mapping from ever becoming writable and makes
is_cow_mapping(vm_flags) false.
Fixes: f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3")
Suggested-by: Daniel Vetter <[email protected]>
Tested-by: Felix Kuehling <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
Add new PCI device id.
Signed-off-by: Jinzhou Su <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 5.11.x
|
|
Add new PCI device id.
Signed-off-by: Jinzhou Su <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send
mode-reset message to SMC.
Signed-off-by: Aaron Liu <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 1098d658bef05e5fee634aab0b6a1fa590cfca24.
Reason for revert: it causes regressions on several Asics.
Signed-off-by: Eric Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 075e8080c1a7571563171a07fa9ce47c4bc80044.
Reason for revert: the related commit is reverted.
Signed-off-by: Eric Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|