aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-08-05drm/amdgpu/display: fix DMUB firmware version infoShirish S1-1/+1
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by: Shirish S <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-08-05drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo1-1/+3
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Qingqing Zhuo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4Jude Shih1-3/+5
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Jude Shih <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amd/display: Increase stutter watermark for dcn303Bing Guo1-2/+2
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Bing Guo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo1-1/+1
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Bing Guo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers4-19/+40
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wesley Chalmers <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amdgpu: fix checking pmops when PM_SLEEP is not enabledRandy Dunlap1-1/+1
'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set, PM_SLEEP is not set, so this variable cannot be used. ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’? return pm_suspend_target_state == PM_SUSPEND_TO_IDLE; ^~~~~~~~~~~~~~~~~~~~~~~ __KSYM_pm_suspend_target_state Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the 2 config symbols. Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state") Signed-off-by: Randy Dunlap <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-08-05drm/amd/pm: update yellow carp pmfw interface versionXiaomeng Hou1-1/+1
Correct yellow carp driver-PMFW interface version to v4. Signed-off-by: Xiaomeng Hou <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02drm/amdgpu/powerplay/smu10: Fix a typo in error messageMasanari Iida1-1/+1
This patch fixes a spelling typo in error message. Signed-off-by: Masanari Iida <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02drm/amd/display: Fix typo in commentsCai Huoqing7-8/+8
Remove the repeated word 'the' from comments Signed-off-by: Cai Huoqing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.Yifan Zhang1-1/+20
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02drm/amdkfd: Only apply heavy-weight TLB flush on AldebaranEric Huang1-15/+17
It is to workaround HW bug on other Asics and based on reverting two commits back: drm/amdkfd: Add heavy-weight TLB flush after unmapping drm/amdkfd: Add memory sync before TLB flush on unmap Signed-off-by: Eric Huang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdkfd: Only apply TLB flush optimization on ALdebaran""Eric Huang1-0/+6
This reverts commit 53d0533049a573298f74ae07a39db14163960e68. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdkfd: Add memory sync before TLB flush on unmap""Eric Huang1-3/+20
This reverts commit 4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdgpu: Fix warning of Function parameter or member not ↵Eric Huang1-0/+1
described"" This reverts commit 4e7b93ca52fb228b177168d436449c5671415a72. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdkfd: Make TLB flush conditional on mapping""Eric Huang4-20/+27
This reverts commit 7ed9876c9793bfe96fed58ba645d6c8e32f26001. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update""Eric Huang4-10/+10
This reverts commit 024d8811c90ed56d8b90cdcf71e51c9fedeff460. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02Revert "Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping""Eric Huang1-0/+1
This reverts commit 430f8e6edbaac8abfddf76f1aef732d9c6257211. Revert reason: Issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-02drm/amdgpu: Fix out-of-bounds read when update mappingxinhui pan1-1/+2
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-30drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.Yifan Zhang1-1/+20
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-30drm/amdgpu: Fix out-of-bounds read when update mappingxinhui pan1-1/+2
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie162-2654/+6845
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-07-28drm/amd/pm: Fix a bug in semaphore double-lockLuben Tuikov1-2/+0
Fix a bug in smu_cmn_send_msg_without_waiting() in that this function does not need to take the smu->message_lock mutex in order to send a message down to the SMU. The mutex is acquired by the caller of this function instead. Cc: Alex Deucher <[email protected]> Cc: Changfeng Zhu <[email protected]> Cc: Huang Rui <[email protected]> Fixes: 5810323ba69289 ("drm/amd/pm: Fix a bug communicating with the SMU (v5)") Signed-off-by: Luben Tuikov <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: enable psp front door loading by default for cyan_skillfish2Huang Rui1-3/+4
The function is ready on psp firmware, and enable it by default. Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: adjust fence driver enable sequenceLikun Gao3-47/+14
Fence driver was enabled per ring when sw init on per IP block before. Change to enable all the fence driver at the same time after amdgpu_device_ip_init finished. Rename some function related to fence to make it reasonable for read. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: Added PSP13 BL loading support for additional driversJohn Clements1-0/+18
Added BL loading support for soc/intf/dbg drivers Signed-off-by: John Clements <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: Consolidated PSP13 BL FW loadingJohn Clements1-35/+11
Remove duplicate code Signed-off-by: John Clements <[email protected]> Reviewed-by: Hawking Zhang <[email protected]>. Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: Added support for added psp driver binaries FWJohn Clements3-7/+70
Detect psp driver binaries packed into FW and try to load the FW Signed-off-by: John Clements <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: Added latest PSP FW headerJohn Clements2-21/+116
Improved handling for scalling PSP FW binaries Signed-off-by: John Clements <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu: remove the access of xxx_PSP_DEBUG on cycan_skillfishHuang Rui1-2/+0
It won't need to clear the xxx_PSP_DEBUG registers, because firmware will handle this change. Signed-off-by: Huang Rui <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu/display: add support for multiple backlightsAlex Deucher3-71/+84
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by: kernel test robot <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher1-2/+2
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <[email protected]> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/pm: restore user customized OD settings properly for Sienna CichlidEvan Quan1-9/+28
Properly restore those committed and non-committed user customized OD settings. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/pm: restore user customized OD settings properly for NV1xEvan Quan5-17/+82
The customized OD settings can be divided into two parts: those committed ones and non-committed ones. - For those changes which had been fed to SMU before S3/S4/Runpm suspend kicked, they are committed changes. They should be properly restored and fed to SMU on S3/S4/Runpm resume. - For those non-committed changes, they are restored only without feeding to SMU. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28Revert "Revert "drm/amdkfd: Add memory sync before TLB flush on unmap""Eric Huang1-3/+20
This reverts commit 4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28Revert "Revert "drm/amdgpu: Fix warning of Function parameter or member not ↵Eric Huang1-0/+1
described"" This reverts commit 4e7b93ca52fb228b177168d436449c5671415a72. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28Revert "Revert "drm/amdkfd: Make TLB flush conditional on mapping""Eric Huang4-20/+27
This reverts commit 7ed9876c9793bfe96fed58ba645d6c8e32f26001. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28Revert "Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update""Eric Huang4-10/+10
This reverts commit 024d8811c90ed56d8b90cdcf71e51c9fedeff460. Revert reason: The issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28Revert "Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping""Eric Huang1-0/+1
This reverts commit 430f8e6edbaac8abfddf76f1aef732d9c6257211. Revert reason: Issue has been resolved. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: 3.2.146Aric Cyr1-1/+1
This version brings along following fixed: - Guard DST_Y_PREFETCH register overflow in DCN21 - Add missing DCN21 IP parameter - Fix PSR command version - Add ETW logging for AUX failures - Add ETW log to dmub_psr_get_state - Fixed EdidUtility build errors - Fix missing reg offset for the dmcub test debug registers - Adding update authentication interface - Remove unused functions of opm state query support - Always wait for update lock status - Refactor riommu invalidation wa - Ensure dentist display clock update finished in DCN20 Reviewed-by: Hsieh Mike <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: [FW Promotion] Release 0.0.76Anthony Koo1-2/+2
Reviewed-by: Cyr Aric <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao1-1/+1
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Dale Zhao <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: refactor riommu invalidation waEric Yang7-50/+28
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Eric Yang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: Always wait for update lock statusEric Bernstein1-5/+3
Remove code that would skip wait for lock status for Diags FPGA case Reviewed-by: Laktyushkin Dmytro <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Eric Bernstein <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: remove unused functionsWenjing Liu7-53/+22
[why] It has been decided that opm state query support will be dropped. Therefore link encryption enabled and save current encryption states won't be used anymore and there are no foreseeable usages in the future. We will remove these two interfaces for clean up. Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: add update authentication interfaceWenjing Liu2-6/+69
[why] Previously to toggle authentication, we need to remove and add the same display back with modified adjustment. This method will toggle DTM state without actual hardware changes. This is not per design and would cause potential issues in the long run. [how] We are creating a dedicated interface that does the same thing as remove and add back the display without changing DTM state. Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: fix missing reg offsetEric Yang1-1/+4
[Why] Initializing was missing reg offsets for the dmcub test debug registers causing assert [How] Add initialization Reviewed-by: Kazlauskas Nicholas <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Eric Yang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-28drm/amd/display: Fixed EdidUtility build errorsMark Morra4-320/+382
[HOW] Added #ifdefs and refactored various parts of dc to allow dc_link to be built by AMD EDID UTILITY [WHY] dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed to dc_link, so now dc_link needs to be included by AMD EDID UTILITY Squash in DCN config fix (Alex) Reviewed-by: Leung Martin <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Mark Morra <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-27drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher1-2/+2
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <[email protected]> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-27drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao1-1/+1
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Dale Zhao <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.