aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-05-23drm/amdgpu: add cp queue registers for gfx11 ipdumpSunil Khatri1-2/+109
Add gfx11 support of CP queue registers for all queues to be used by devcoredump. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amd/display: Pass errors from amdgpu_dm_init() upMario Limonciello1-1/+5
Errors in amdgpu_dm_init() are silently ignored and dm_hw_init() will succeed. However often these are fatal errors and it would be better to pass them up. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: add print support for gfx11 ipdumpSunil Khatri1-1/+16
Add support of gfx11 ipdump print so devcoredump could trigger it to dump the captured registers in devcoredump. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: add gfx11 registers support in ipdumpSunil Khatri1-1/+106
Add general registers of gfx11 in ipdump for devcoredump support. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: Add missing offsets in gc_11_0_0_offset.hSunil Khatri1-0/+10
IB1 registers: regCP_IB1_CMD_BUFSZ regCP_IB1_BASE_LO regCP_IB1_BASE_HI regCP_IB1_BUFSZ regCP_MES_DEBUG_INTERRUPT_INSTR_PNTR Above registers are part of the asic but not of the offset file for gc_11_0_0_offset.h and hence adding them. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: add more device info to the devcoredumpSunil Khatri1-2/+19
Adding more device information: a. PCI info b. VRAM and GTT info c. GDC config Also correct the print layout and section information for in devcoredump. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: add prints in IP State dumpSunil Khatri1-0/+2
add prints before and after ip state is dumped. It avoids user to think of system being stuck/hung as dump could take some time after a gpu hang. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: add gfx queue support of gfx10 in ipdumpSunil Khatri2-0/+91
Add gfx queue register for all instances in devcoredump for gfx10. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: Add cp queues support fro gfx10 in ipdumpSunil Khatri2-4/+113
Add support to dump registers of all instances of cp queue registers of gfx10 to devcoredump. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: rename the ip_dump to ip_dump_coreSunil Khatri2-8/+8
Rename the memory pointer from ip_dump to ip_dump_core to make it specific to core registers and rest other registers to be dumped in their respective memories. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: Add CRC16 selection in configLijo Lazar1-0/+1
KFD uses crc16 for gpu_id generation. Fixes: 3ed181b8ff43 ("drm/amdkfd: Ensure gpu_id is unique") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amd/pm: workaround to pass jpeg unit testKenneth Feng2-2/+31
this is a workaround to pass jpeg unit test on vcn 5.0 now. will be removed later. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Sonny Jiang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amd/amdgpu: fix the inst passed to amdgpu_virt_rlcg_reg_rwVictor Zhao2-11/+11
the inst passed to amdgpu_virt_rlcg_reg_rw should be physical instance. Fix the miss matched code. Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu - optimize rlc spm cntlJane Jian3-20/+38
v1 - driver MMIO read the register to check whether write is required - if write is required, sriov full time to use rlcg, otherwise use KIQ v2 - include gfx v11 sriov runtime case Signed-off-by: Jane Jian <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amd/display: Refactor construct_phy function in dc/link/link_factory.cSrinivasan Shanmugam1-33/+34
This commit modifies the construct_phy function to handle the case where `bios->integrated_info` is NULL and to address a compiler warning about a large stack allocation. Upon examination, it was found that the local `integrated_info` structure was just used to copy values which is large and was being declared directly on the stack which could potentially lead to performance issues. This commit changes the code to use `bios->integrated_info` directly, which avoids the need for a large stack allocation. The function now checks if `bios->integrated_info` is NULL before entering a for loop that uses it. If `bios->integrated_info` is NULL, the function skips the for loop and continues executing the rest of the code. This ensures that the function behaves correctly when `bios->integrated_info` is NULL and improves compatibility with dGPUs. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function ‘construct_phy’: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Wenjing Liu <[email protected]> Cc: Jerry Zuo <[email protected]> Cc: Qingqing Zhuo <[email protected]> Cc: Tom Chung <[email protected]> Cc: Alvin Lee <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Hersen Wu <[email protected]> Cc: Alex Hung <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Harry Wentland <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Suggested-by: Wenjing Liu <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: correct hbm field in boot statusHawking Zhang1-1/+1
hbm filed takes bit 13 and bit 14 in boot status. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: program device_cntl2 through pci cfg spaceFrank Min1-5/+8
device_cntl2 is accessible from pci config space, so program it through pci cfg space instead of mmio. Signed-off-by: Frank Min <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu/atomfirmware: add intergrated info v2.3 tableLi Ma2-0/+58
[Why] The vram width value is 0. Because the integratedsysteminfo table in VBIOS has updated to 2.3. [How] Driver needs a new intergrated info v2.3 table too. Then the vram width value will be correct. Signed-off-by: Li Ma <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: Fix snprintf usage in amdgpu_gfx_kiq_init_ringSrinivasan Shanmugam1-1/+1
This commit fixes a format truncation issue arosed by the snprintf function potentially writing more characters into the ring->name buffer than it can hold, in the amdgpu_gfx_kiq_init_ring function The issue occurred because the '%d' format specifier could write between 1 and 10 bytes into a region of size between 0 and 8, depending on the values of xcc_id, ring->me, ring->pipe, and ring->queue. The snprintf function could output between 12 and 41 bytes into a destination of size 16, leading to potential truncation. To resolve this, the snprintf line was modified to use the '%hhu' format specifier for xcc_id, ring->me, ring->pipe, and ring->queue. The '%hhu' specifier is used for unsigned char variables and ensures that these values are printed as unsigned decimal integers. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_kiq_init_ring’: drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:61: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 8 [-Wformat-truncation=] 332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d", | ^~ drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:50: note: directive argument in the range [0, 2147483647] 332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d", | ^~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 16 332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 333 | xcc_id, ring->me, ring->pipe, ring->queue); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 345a36c4f1ba ("drm/amdgpu: prefer snprintf over sprintf") Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: fix invadate operation for pg_flagsJesse Zhang1-2/+2
Since the type of pg_flags is u32, adev->pg_flags >> 16 >> 16 is 0 regardless of the values of its operands. So removing the operations upper_32_bits and lower_32_bits. Signed-off-by: Jesse Zhang <[email protected]> Suggested-by: Tim Huang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu/mes12: mes hw_fini fix for mode1 resetJack Xiao1-3/+4
Port mes11 hw_fini to mes12, fix for mode1 reset. Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: fix invadate operation for umschJesse Zhang1-3/+2
Since the type of data_size is uint32_t, adev->umsch_mm.data_size - 1 >> 16 >> 16 is 0 regardless of the values of its operands So removing the operations upper_32_bits and lower_32_bits. Signed-off-by: Jesse Zhang <[email protected]> Suggested-by: Tim Huang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/admgpu: fix dereferencing null pointer contextJesse Zhang1-1/+1
When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it Signed-off-by: Jesse Zhang <[email protected]> Suggested-by: Tim Huang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amd/pm: fix unsigned value asic_type compared againstJesse Zhang1-6/+2
Enum asic_type always greater than or equal CHIP_TAHITI. Signed-off-by: Jesse Zhang <[email protected]> Suggested-by: Tim Huang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: skip to create ras xxx_err_count node when ACA is enabledYang Wang1-0/+6
skip to create 'xxx_err_count' node when ACA is enabled. Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-23drm/amdgpu: remove amdgpu_connector_edid() and stop using edid_blob_ptrJani Nikula6-25/+8
amdgpu_connector_edid() copies the EDID from edid_blob_ptr as a side effect if amdgpu_connector->edid isn't initialized. However, everywhere that the returned EDID is used, the EDID should have been set beforehands. Only the drm EDID code should look at the EDID property, anyway, so stop using it. Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: Pan Cc: [email protected] Reviewed-by: Robert Foss <[email protected]> Acked-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1463862965d76e9458551598fd4d287a08d3d264.1715353572.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-05-23Merge tag 'drm-misc-next-fixes-2024-05-23' of ↵Dave Airlie1-1/+1
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - MST null deref fix. - Don't let next bridge create connector in adv7511 to make probe work. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-22Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of ↵Linus Torvalds4-102/+7
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more non-mm updates from Andrew Morton: - A series ("kbuild: enable more warnings by default") from Arnd Bergmann which enables a number of additional build-time warnings. We fixed all the fallout which we could find, there may still be a few stragglers. - Samuel Holland has developed the series "Unified cross-architecture kernel-mode FPU API". This does a lot of consolidation of per-architecture kernel-mode FPU usage and enables the use of newer AMD GPUs on RISC-V. - Tao Su has fixed some selftests build warnings in the series "Selftests: Fix compilation warnings due to missing _GNU_SOURCE definition". - This pull also includes a nilfs2 fixup from Ryusuke Konishi. * tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) nilfs2: make block erasure safe in nilfs_finish_roll_forward() selftests/harness: use 1024 in place of LINE_MAX Revert "selftests/harness: remove use of LINE_MAX" selftests/fpu: allow building on other architectures selftests/fpu: move FP code to a separate translation unit drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT drm/amd/display: only use hard-float, not altivec on powerpc riscv: add support for kernel-mode FPU x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT arch: add ARCH_HAS_KERNEL_FPU_SUPPORT x86/fpu: fix asm/fpu/types.h include guard kbuild: enable -Wcast-function-type-strict unconditionally kbuild: enable -Wformat-truncation on clang ...
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)2-9/+9
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Julia Lawall <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Acked-by: Jani Nikula <[email protected]> Acked-by: Christian König <[email protected]> for the amdgpu parts. Acked-by: Thomas Hellström <[email protected]> #for Acked-by: Rafael J. Wysocki <[email protected]> # for thermal Acked-by: Takashi Iwai <[email protected]> Acked-by: Darrick J. Wong <[email protected]> # xfs Tested-by: Guenter Roeck <[email protected]>
2024-05-22drm/amdgpu/atomfirmware: add intergrated info v2.3 tableLi Ma2-0/+58
[Why] The vram width value is 0. Because the integratedsysteminfo table in VBIOS has updated to 2.3. [How] Driver needs a new intergrated info v2.3 table too. Then the vram width value will be correct. Signed-off-by: Li Ma <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-05-21drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2Wayne Lin1-1/+1
[Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <[email protected]> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/ Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Harry Wentland <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-21drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2Wayne Lin1-1/+1
[Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <[email protected]> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/ Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Harry Wentland <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-20drm/amdkfd: Let VRAM allocations go to GTT domain on small APUsLang Yu5-13/+23
Small APUs(i.e., consumer, embedded products) usually have a small carveout device memory which can't satisfy most compute workloads memory allocation requirements. We can't even run a Basic MNIST Example with a default 512MB carveout. https://github.com/pytorch/examples/tree/main/mnist. Error Log: "torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate 84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes is free. Of the allocated memory 103.83 MiB is allocated by PyTorch, and 22.17 MiB is reserved by PyTorch but unallocated" Though we can change BIOS settings to enlarge carveout size, which is inflexible and may bring complaint. On the other hand, the memory resource can't be effectively used between host and device. The solution is MI300A approach, i.e., let VRAM allocations go to GTT. Then device and host can flexibly and effectively share memory resource. v2: Report local_mem_size_private as 0. (Felix) Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vmsLang Yu1-1/+2
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used. Two attachments use the same VM, root PD would be locked twice. [ 57.910418] Call Trace: [ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu] [ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu] [ 57.793923] ? idr_get_next_ul+0xbe/0x100 [ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu] [ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu] [ 57.794141] ? process_scheduled_works+0x29c/0x580 [ 57.794147] process_scheduled_works+0x303/0x580 [ 57.794157] ? __pfx_worker_thread+0x10/0x10 [ 57.794160] worker_thread+0x1a2/0x370 [ 57.794165] ? __pfx_worker_thread+0x10/0x10 [ 57.794167] kthread+0x11b/0x150 [ 57.794172] ? __pfx_kthread+0x10/0x10 [ 57.794177] ret_from_fork+0x3d/0x60 [ 57.794181] ? __pfx_kthread+0x10/0x10 [ 57.794184] ret_from_fork_asm+0x1b/0x30 Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdgpu: Fix amdgpu_vm_is_bo_always_valid kerneldocTvrtko Ursulin1-1/+1
Align kerneldoc with the function argument name. Signed-off-by: Tvrtko Ursulin <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Fixes: 26e20235ce00 ("drm/amdgpu: Add amdgpu_bo_is_vm_bo helper") Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/display: remove unused struct 'dc_reg_sequence'Dr. David Alan Gilbert1-5/+0
'dc_reg_sequence' was added in commit 44788bbc309b ("drm/amd/display: refactor reg_update") but isn't actually used. Remove it. Signed-off-by: Dr. David Alan Gilbert <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/display: remove unused struct 'aux_payloads'Dr. David Alan Gilbert1-4/+0
'aux_payloads' is unused since commit eae5ffa9bd7b ("drm/amd/display: Switch ddc to new aux interface") Remove it. Signed-off-by: Dr. David Alan Gilbert <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdgpu: remove unused struct 'hqd_registers'Dr. David Alan Gilbert1-38/+0
'hqd_registers' used to be used in a member of the 'bonaire_mqd' struct. 'bonaire_mqd' was removed by commit 486d807cd9a9 ("drm/amdgpu: remove duplicate definition of cik_mqd") It's now unused. Remove 'hqd_registers' as well. Signed-off-by: Dr. David Alan Gilbert <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/pm: enable thermal alert on smu 14.0.2/3Kenneth Feng3-3/+108
enable thermal alert on smu 14.0.2/3 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/amdgpu: add thm 14.0.2 header fileKenneth Feng2-0/+1168
add thm 14.0.2 header file v2: add license, update to latest changes (Alex) Signed-off-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Reviewed-by: Likun Gao <[email protected]>
2024-05-20Revert "drm/amd/pm: Add gpu_metrics_v1_6"Asad Kamal2-92/+0
Remove gpu_metrics_v1_6 temporarily until tool support is ready This reverts commit 00dedab07b52ca16107e82ce5ca7caaaedf6a417. Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20Documentation/amdgpu: Add PM policy documentationLijo Lazar1-0/+53
Add documentation about the newly added pm_policy node in sysfs. Signed-off-by: Lijo Lazar <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20Revert "drm/amd/pm: Use gpu_metrics_v1_6 for SMUv13.0.6"Asad Kamal1-14/+4
Remove gpu_metrics_v1_6 usage for SMUv13.0.6 temporarily and use gpu_metrics_v1_5 until tool support is ready for it. This reverts commit 74ab6253dc077263a61bebfbdd3766b5c11e94be. Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/pm: Remove unused interface to set plpdLijo Lazar4-91/+0
Remove unused callback to set PLPD policy and its implementation from arcturus, aldebaran and SMUv13.0.6 SOCs. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdgpu: update type of buf size to u32 for eeprom functionsTao Zhou2-5/+5
Avoid overflow issue. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/swsmu: update Dpmclocks_t for smu v14.0.1Li Ma1-1/+0
MinGfxClk in Dpmclocks_t is wrong. According to pmfw, dropping an uint8_t spare in Dpmclocks_t. Signed-off-by: Li Ma <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdgpu: Queue KFD reset workitem in VF FEDVictor Skvortsov1-1/+1
The guest recovery sequence is buggy in Fatal Error when both FLR & KFD reset workitems are queued at the same time. In addition, FLR guest recovery sequence is out of order when PF/VF communication breaks due to a GPU fatal error As a temporary work around, perform a KFD style reset (Initiate reset request from the guest) inside the pf2vf thread on FED. Signed-off-by: Victor Skvortsov <[email protected]> Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdgpu: Extend KIQ reg polling wait for VFVictor Skvortsov1-3/+3
Runtime KIQ interface to read/write registers in VF may take longer than expected for BM environment. Extend the timeout. Signed-off-by: Victor Skvortsov <[email protected]> Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amd/display: 3.2.286Aric Cyr1-1/+1
This version pairs with DMUB FW Release 0.0.218.0 for dcn314/315/316, dcn35/351, dcn401 and brings along the following: - Fix powerpc compilation - Fix TBT+TypeC Daisy-chain lightup - Fix ODM combine setup - Fix OTC underflow on dcn35 - Fix DVI config for dcn401 - Add ips status info to debugfs - Add 3DLUT DMA load trigger - Modify clock programming to support DPM - Disable dcn401 idle optimizations Acked-by: Roman Li <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.