aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15drm/amd/display: Cover edge-case when changing DISPCLK WDIVIDERWesley Chalmers3-6/+69
[WHY] When changing the DISPCLK_WDIVIDER value from 126 to 127, the change in clock rate is too great for the FIFOs to handle. This can cause visible corruption during clock change. HW has handed down this register sequence to fix the issue. [HOW] The sequence, from HW: a. 127 -> 126 Read DIG_FIFO_CAL_AVERAGE_LEVEL FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4 Set DCCG_FIFO_ERRDET_OVR_EN = 1 Write 1 to OTGx_DROP_PIXEL for (N-4) times Set DCCG_FIFO_ERRDET_OVR_EN = 0 Write DENTIST_DISPCLK_RDIVIDER = 126 Because of frequency stepping, sequence a can be executed to change the divider from 127 to any other divider value. b. 126 -> 127 Read DIG_FIFO_CAL_AVERAGE_LEVEL FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4 Set DCCG_FIFO_ERRDET_OVR_EN = 1 Write 1 to OTGx_ADD_PIXEL for (12-N) times Set DCCG_FIFO_ERRDET_OVR_EN = 0 Write DENTIST_DISPCLK_RDIVIDER = 127 Because of frequency stepping, divider must first be set from any other divider value to 126 before executing sequence b. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Add interface to get Calibrated Avg Level from FIFOWesley Chalmers8-0/+60
[WHY] Hardware has handed down a new sequence requiring the value of this register be read from clk_mgr. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Partition DPCD address space and break up transactionsWesley Chalmers1-2/+85
[WHY] SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a single AUX transaction. There may be other places in future where breaking up AUX accesses is necessary. [HOW] Partition the entire DPCD address space into blocks. When an incoming AUX request spans multiple blocks, break up the request into multiple requests. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Do not count I2C DEFERs with AUX DEFERsWesley Chalmers1-1/+2
[WHY] DP 2.0 SCR specifies that "A DPTX shall distinguish I2C_DEFER|AUX_ACK from AUX_DEFER. AUX retries due to I2C_DEFER are not counted as part of minimum 7 retires (sic) upon AUX_DEFER’s" Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: 7 retries + 50 ms timeout on AUX DEFERWesley Chalmers1-3/+15
[WHY] DP 2.0 SCR specifies that TX devices must retry at least 7 times when receiving an AUX DEFER reply from RX. In addition, the specification states that the TX shall not retry indefinitely, and gives a suggestive timeout interval of 50ms. [HOW] Keep retrying until both 7 or more retries have been made, and the 50ms interval has passed. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Rename constantWesley Chalmers1-3/+3
[WHY] 7 is the minimum number of retries TX must attempt on an AUX DEFER, not the maximum. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Enforce DPCD Address rangesWesley Chalmers11-45/+162
[WHY] Some DPCD addresses, notably LTTPR Capability registers, are expected to be read all together in a single DPCD transaction. Rather than force callers to read registers they don't need, we want to quietly extend the addresses read, and only return back the values the caller asked for. This does not affect DPCD writes. [HOW] Create an additional layer above AUX to perform 'checked' DPCD transactions. Iterate through an array of DPCD address ranges that are marked as being contiguous. If a requested read falls within one of those ranges, extend the read to include the entire range. After DPCD has been queried, copy the requested bytes into the caller's data buffer, and deallocate all resources used. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Improve logic for is_lttpr_presentWesley Chalmers1-2/+1
[WHY] DP specifies that an LTTPR device is only present if PHY_REPEATER_CNT is 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01. All other values should be considered no LTTPRs present. [HOW] Function dp_convert_to_count already does this check. Use it to determine if PHY_REPEATER_CNT is a valid LTTPR count. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Always write repeater mode regardless of LTTPRWesley Chalmers1-4/+3
[WHY] SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01. [HOW] Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is requested. Write Transparent in all other cases. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Set LTTPR Transparent Mode after read link capWesley Chalmers1-2/+3
[WHY] SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent mode after reading LTTPR Capability registers on HPD. The wording of the SCR is somewhat ambiguous as to whether Transparent mode must be set explicity, or is implicitly set on LTTPR capability read. Explicitly setting Transparent mode after LTTPR capability read should cover all cases. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Read LTTPR caps first on bootupWesley Chalmers3-0/+8
[WHY] SCR for DP 2.0 requires that LTTPR caps be read first on hotplug. For the sake of consistency, this should also be the case on bootup. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Move LTTPR cap read into its own functionWesley Chalmers1-34/+41
[WHY] We want LTTPR capabilities to be readable from more places than just retrieve_link_cap Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Read LTTPR caps first on hotplugWesley Chalmers1-32/+33
[WHY] A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing read from DPCD upon hotplug. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: move psr dm interface to separate filesRoman Li4-137/+205
[Why] Improve the maintain/read abilities of dm code. [How] Create amdgpu_dm_psr.c/h files. Move psr function from amdgpu_dm.c Signed-off-by: Roman Li <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: 3.2.140Aric Cyr1-1/+1
This version brings along following fixed: - LTTPR improvements - Backlight improvements - eDP hotplug detection Signed-off-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: [FW Promotion] Release 0.0.70Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Updated variable name.David Galiffi1-6/+6
[Why] Fixed spelling error. [How] Changed "currnet_setting" to "current_setting". Signed-off-by: David Galiffi <[email protected]> Reviewed-by: Wesley Chalmers <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Change swizzle visual confirm reference pipePo-Ting Chen1-5/+5
[Why] To change the swizzle visual confirm reference pipe from top pipe to bottom pipe due to bottom pipe information would be more important for multiple overlay case. Signed-off-by: Po-Ting Chen <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: dp mst detection code refactorWenjing Liu2-96/+70
[why] Move mst start top mgr in dc_link_detect layer. Remove unused same_dpcd variable. Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY to the proper header for defining dc link internal constant. Signed-off-by: Wenjing Liu <[email protected]> Reviewed-by: George Shen <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: tune backlight ramping profilesJosip Pavic1-10/+10
[Why & How] Tune backlight ramping profiles for each Vari-Bright level to suit customer preferences Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: add config option for eDP hotplug detectionYi-Ling Chen2-4/+7
[Why] Some custom platforms use eDP hotplug events to notify panel capability changes that should be reported [How] Add a DC config option that unblocks eDP hotplug events Signed-off-by: Yi-Ling Chen <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: add DMUB registers to crash dump diagnostic data.Ashley Thomas11-9/+238
[WHY] Ability to triage DMCUB is improved with availability of certain dmub registers not currently captured in crash dump diagnostic data. [HOW] Add dmub registers to diagnostic data collection. Thanks Nicholas Kazlauskas for awesome input on this! Signed-off-by: Ashley Thomas <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Remove unnecessary blank linesDmytro Laktyushkin1-2/+0
cleanup Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amdkfd: fix circular locking on get_wave_stateJonathan Kim1-15/+13
get_wave_state acquires the mmap_lock on copy_to_user but so do mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state outside the dqm_lock to prevent circular locking. v2: squash in unused variable removal. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_checkMark Yacoub3-6/+40
For each CRTC state, check the size of Gamma and Degamma LUTs so unexpected and larger sizes wouldn't slip through. TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes v2: fix assignments in if clauses, Mark's email. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Mark Yacoub <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: disable DRAM memory training when GECC is enabledHawking Zhang2-13/+35
GECC and G6 mem training are mutually exclusive functionalities. VBIOS/PSP will set the flag (BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in runtime database to indicate whether dram memory training need to be disabled or not. For Navi1x families, two stage mem training is always enabled. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: cache psp runtime boot_cfg_bitmask in sw_intHawking Zhang2-0/+9
PSP runtime boot_cfg_bitmask carries various psp bl feature bit mask that can be used by driver. Cache it in sw_init for further usage. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: add helper function to query psp runtime db entry (v2)Hawking Zhang1-0/+68
PSP will dump various boot up information into a portion of local frame buffer, called runtime database. The helper function is used for driver to query those shared information. v2: init ret and check !ret to exit loop as soon as found the entry Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: add psp runtime db structuresHawking Zhang1-0/+54
PSP runtime database is used to share various boot up information with driver. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: enable dynamic GECC support (v2)Hawking Zhang1-10/+47
Dynamic GECC allows user to specify GECC enablement status, which will take effect in next boot cycle. v2: initialize boot_cfg to 0xFF Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: add helper function to query gecc status in boot configHawking Zhang1-0/+23
Query GECC enablement status in boot config Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: allow different boot configsHawking Zhang1-4/+4
More boot configs need to be supported via BOOTCFG_CMD_SET Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: update psp gfx i/f to support dynamic GECCHawking Zhang1-4/+9
psp_gfx_uresp_bootcfg is used to inform driver bootcfg settings maintained by tOS Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdkfd: move CoherentHostAccess prop to HSA_CAPABILITYAlex Sierra1-4/+3
CoherentHostAccess flag support has moved from HSA_MEMORYPROPERTY to HSA_CAPABILITY struct. Proper changes have made also at the thunk to support this change. CoherentHostAccess: whether or not device memory can be coherently accessed by the host CPU. Signed-off-by: Alex Sierra <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/display: add dummy PG callback for beige gobyAurabindo Pillai3-0/+7
[Why&How] PG registers are absent in beige goby, so programming these registers generate call trace. Fix this by adding a dummy function in dcn303 initialization function which prevents writing to non existant registers. Fixes: cd6d421e3d1ad5 ("drm/amd/display: Initial DC support for Beige Goby") Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: support ss metrics read on yellow_carpSathishkumar S1-0/+34
add support to read smart shift apu and dgpu power share on yellow_carp Signed-off-by: Sathishkumar S <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: support ss metrics read on renoirSathishkumar S1-0/+34
add support to read smart shift apu and dgpu power share on renoir. Signed-off-by: Sathishkumar S <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdkfd: Add memory sync before TLB flush on unmapEric Huang1-3/+20
It is to fix a failure for SDMA updating PTEs. Signed-off-by: Eric Huang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: use adev_to_drm macro for consistency (v2)Guchun Chen2-2/+2
Use adev_to_drm() to get to the drm_device pointer. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Luben Tuikov <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: reset psp ring wptr during ring_createYuBiao Wang2-0/+2
[Why] psp ring wptr is not initialized properly in ring_create, which would lead to psp failure after several gpu reset. [How] Set ring_wptr to zero in psp_ring_create. Signed-off-by: YuBiao Wang <[email protected]> Reviewed-by: Horace Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: Only primary die supports power dataLijo Lazar1-11/+46
On aldebaran, only primary die fetches valid power data. Show power/energy values as 0 on secondary die. Also, power limit should not be set through secondary die. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the power limits reporting on OOB supportedEvan Quan8-35/+95
As OOB(out-of-band) interface may be used to update the power limits. Thus to make sure the power limits reporting of our driver always reflects the correct values, the internal cache must be aligned carefully. V2: add support for out-of-band of other ASICs align cached current power limit with OOB imposed Signed-off-by: Evan Quan <[email protected]> Reviewed-By: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/amdgpu: add instance_number check in amdgpu_discovery_get_ip_versionPeng Ju Zhou2-3/+3
The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs. However, for certain IP block (VCN for example), it may have 2 instances and both of them have the same hw_id, BUT they have different revision number (0 and 1). In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects the result and returns false information Signed-off-by: Bokun Zhang <[email protected]> Signed-off-by: Peng Ju Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the dpm features disablement for Navi1xEvan Quan1-1/+2
For BACO scenario, PMFW will handle the dpm features disablement and interaction with RLC properly. Driver involvement is unnecessary and error prone. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: update the cached dpm feature statusEvan Quan5-13/+50
For some ASICs, the real dpm feature disablement job is handled by PMFW during baco reset and custom pptable loading. Cached dpm feature status need to be updated to pair that. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amdgpu: make audio dev's D-state transition PMFW-awareEvan Quan1-0/+42
To correctly kick into BACO state, the audio dev's D-state transition(D0->D3) needs to be PMFW-aware. So, if the audio dev entered D3 state prior to our driver, we need to bring it back to D0 state and make sure there will be a D-state transition on runpm suspend. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the runpm handling for BACO supported ASICEvan Quan4-13/+55
Via the fSMC_MSG_ArmD3 message, PMFW can properly act on the Dstate change. Driver involvement for determining the timing for BACO enter/exit is not needed. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: drop the incomplete fix for Navi14 runpm issueEvan Quan2-29/+2
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to be incomplete. Another fix(see link below) has been sent out. Link: https://lore.kernel.org/linux-pci/[email protected]/ Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm: display: Remove duplicated argument in dcn31Wan Jiabing1-2/+2
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c: 3539:12-42: duplicated argument to && or || ./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c: 5677:87-123: duplicated argument to && or || Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm: display: Remove duplicate include in dce110Wan Jiabing1-1/+0
Fix the following checkincludes.pl warning: ./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c 35 #include "dce110_hw_sequencer.h" 69 #include "dce110_hw_sequencer.h" Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.