aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2023-09-07Merge tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds49-176/+628
Pull drm fixes from Dave Airlie: "Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three weeks in one go, one i915, one nouveau and one ivpu. I think there might be a few more fixes in misc that I haven't pulled in yet, but we should get them all for rc2. amdgpu: - Display replay fixes - Fixes for headless boards - Fix documentation breakage - RAS fixes - Handle newer IP discovery tables - SMU 13.0.6 fixes - SR-IOV fixes - Display vstartup fixes - NBIO 7.9 fixes - Display scaling mode fixes - Debugfs power reporting fix - GC 9.4.3 fixes - Dirty framebuffer fixes for fbcon - eDP fixes - DCN 3.1.5 fix - Display ODM fixes - GPU core dump fix - Re-enable zops property now that IGT test is fixed - Fix possible UAF in CS code - Cursor degamma fix amdkfd: - HMM fixes - Interrupt masking fix - GFX11 MQD fixes i915: - Mark requests for GuC virtual engines to avoid use-after-free nouveau: - Fix fence state in nouveau_fence_emit() ivpu: - replace strncpy" * tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits) drm/amdgpu: Restrict bootloader wait to SMUv13.0.6 drm/amd/display: prevent potential division by zero errors drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1 Revert "drm/amd/display: Remove v_startup workaround for dcn3+" drm/amdgpu: fix amdgpu_cs_p1_user_fence Revert "Revert "drm/amd/display: Implement zpos property"" drm/amdkfd: Add missing gfx11 MQD manager callbacks drm/amdgpu: Free ras cmd input buffer properly drm/amdgpu: Hide xcp partition sysfs under SRIOV drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting drm/amdkfd: use mask to get v9 interrupt sq data bits correctly drm/amdgpu: Allocate coredump memory in a nonblocking way drm/amdgpu: Support query ecc cap for aqua_vanjaram drm/amdgpu: Add umc_info v4_0 structure drm/amd/display: always switch off ODM before committing more streams drm/amd/display: Remove wait while locked drm/amd/display: update blank state on ODM changes drm/amd/display: Add smu write msg id fail retry process drm/amdgpu: Add SMU v13.0.6 default reset methods ...
2023-09-06drm/amdgpu: Restrict bootloader wait to SMUv13.0.6Lijo Lazar1-4/+14
Restrict the wait for boot loader steady state only to SMUv13.0.6. For older SOCs, ASIC init has a longer wait period and that takes care. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: prevent potential division by zero errorsHamza Mahfooz1-3/+6
There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization") Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gammaMelissa Wen1-0/+7
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1Hamza Mahfooz1-1/+2
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs can cause the display to flicker and underflow to occur, we shouldn't call it for them. So, ensure that the DCN version is less than DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup(). Cc: [email protected] Reviewed-by: Fangzhi Zuo <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06Revert "drm/amd/display: Remove v_startup workaround for dcn3+"Hamza Mahfooz1-20/+4
This reverts commit 3a31e8b89b7240d9a17ace8a1ed050bdcb560f9e. We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+ ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809 Reviewed-by: Fangzhi Zuo <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: fix amdgpu_cs_p1_user_fenceChristian König1-14/+4
The offset is just 32bits here so this can potentially overflow if somebody specifies a large value. Instead reduce the size to calculate the last possible offset. The error handling path incorrectly drops the reference to the user fence BO resulting in potential reference count underflow. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-08-31Revert "Revert "drm/amd/display: Implement zpos property""Hamza Mahfooz1-0/+9
This reverts commit e2066eb4efe0e7d2d329d6e6765ed637a523ac45. The problematic IGT test case (i.e. kms_atomic@plane-immutable-zpos) has been fixed as of commit cb77add45011 ("tests/kms_atomic: remove zpos < N-planes assert") to the IGT repo. So, reintroduce the reverted code. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/cb77add45011b129e21f3cb2a4089a73dde56179 Acked-by: Alex Deucher <[email protected]> Reviewed-by: Melissa Wen <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdkfd: Add missing gfx11 MQD manager callbacksJay Cornwall1-0/+3
mqd_stride function was introduced in commit 2f77b9a242a2 ("drm/amdkfd: Update MQD management on multi XCC setup") but not assigned for gfx11. Fixes a NULL dereference in debugfs. Signed-off-by: Jay Cornwall <[email protected]> Signed-off-by: Harish Kasiviswanathan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.5.x
2023-08-31drm/amdgpu: Free ras cmd input buffer properlyHawking Zhang1-7/+7
Do not access the pointer for ras input cmd buffer if it is even not allocated. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Stanley Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Hide xcp partition sysfs under SRIOVRajneesh Bhardwaj1-3/+8
XCP partitions should not be visible for the VF for GFXIP 9.4.3. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ settingTao Zhou1-1/+2
Instead of using direct update, avoid touching unrelated fields. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdkfd: use mask to get v9 interrupt sq data bits correctlyAlex Sierra1-1/+1
Interrupt sq data bits were not taken properly from contextid0 and contextid1. Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead. Signed-off-by: Alex Sierra <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Allocate coredump memory in a nonblocking wayAndré Almeida1-1/+1
During a GPU reset, a normal memory reclaim could block to reclaim memory. Giving that coredump is a best effort mechanism, it shouldn't disturb the reset path. Change its memory allocation flag to a nonblocking one. Signed-off-by: André Almeida <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Support query ecc cap for aqua_vanjaramHawking Zhang1-2/+16
Driver queries umc_info v4_0 to identify ecc cap for aqua_vanjaram Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Candice Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Add umc_info v4_0 structureHawking Zhang1-0/+18
To be used by aqua_vanjaram Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Candice Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: always switch off ODM before committing more streamsWenjing Liu1-5/+5
ODM power optimization is only supported with single stream. When ODM power optimization is enabled, we might not have enough free pipes for enabling other stream. So when we are committing more than 1 stream we should first switch off ODM power optimization to make room for new stream and then allocating pipe resource for the new stream. Cc: [email protected] Fixes: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe") Reviewed-by: Dillon Varone <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: Remove wait while lockedGabe Teeger3-28/+42
[Why] We wait for mpc idle while in a locked state, leading to potential deadlock. [What] Move the wait_for_idle call to outside of HW lock. This and a call to wait_drr_doublebuffer_pending_clear are moved added to a new static helper function called wait_for_outstanding_hw_updates, to make the interface clearer. Cc: [email protected] Fixes: 8f0d304d21b3 ("drm/amd/display: Do not commit pipe when updating DRR") Reviewed-by: Jun Lei <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Gabe Teeger <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: update blank state on ODM changesWenjing Liu1-27/+9
When we are dynamically adding new ODM slices, we didn't update blank state, if the pipe used by new ODM slice is previously blanked, we will continue outputting blank pixel data on that slice causing right half of the screen showing blank image. The previous fix was a temporary hack to directly update current state when committing new state. This could potentially cause hw and sw state synchronization issues and it is not permitted by dc commit design. Cc: [email protected] Fixes: 7fbf451e7639 ("drm/amd/display: Reinit DPG when exiting dynamic ODM") Reviewed-by: Dillon Varone <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: Add smu write msg id fail retry processFudong Wang1-4/+16
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: [email protected] # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Fudong Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Add SMU v13.0.6 default reset methodsLijo Lazar2-3/+4
For APUs with SMU v13.0.6, mode-2 reset is kept as default and for others mode-1 is the default reset method. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31Partially revert "drm/amd/display: update add plane to context logic with a ↵Wenjing Liu1-4/+114
new algorithm" This partially reverts commit 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm"). The new secondary pipe allocation logic triggers an issue with a specific hardware state transition and causes a frame of corruption when toggling between windowed MPO and ODM desktop only mode. Ideally hwss is supposed to handle this scenario. We are temporarily reverting the logic and investigate the root cause why this transition would cause corruptions. Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: register edp_backlight_control() for DCN301Hamza Mahfooz1-0/+1
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Add bootloader wait for PSP v13Lijo Lazar1-2/+26
Implement the wait for bootloader call back for PSP v13.0 ASICs. Only for ASICs with PSP v13.0.6, it needs an additional check for VBIOS mailbox status. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: register a dirty framebuffer callback for fbconHamza Mahfooz1-1/+25
fbcon requires that we implement &drm_framebuffer_funcs.dirty. Otherwise, the framebuffer might take a while to flush (which would manifest as noticeable lag). However, we can't enable this callback for non-fbcon cases since it may cause too many atomic commits to be made at once. So, implement amdgpu_dirtyfb() and only enable it for fbcon framebuffers (we can use the "struct drm_file file" parameter in the callback to check for this since it is only NULL when called by fbcon, at least in the mainline kernel) on devices that support atomic KMS. Cc: Aurabindo Pillai <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: [email protected] # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519 Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Updated TCP/UTCL1 programmingMangesh Gadre1-0/+3
Update TCP/UTCL1 thrashing control settings v2: updated rev_id check Signed-off-by: Mangesh Gadre <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/pm: fix debugfs pm_info outputAlex Deucher1-0/+3
Print both input and avg power. Fixes: 47f1724db4fe ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`") Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Fix the return for gpu mode1_resetHawking Zhang1-2/+11
amdgpu_device_mode1_reset will return gpu mode1_reset succeed (ret = 0) as long as wait_for_bootloader call succeed, regardless of the status reported by smu or psp firmware. This results to driver continue executing recovery even smu or psp fail to perform mode1 reset. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: fix static screen detection settingSungHuai Wang6-4/+23
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: SungHuai Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: fix mode scaling (RMX_.*)Hamza Mahfooz1-1/+1
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed non-native modes not lighting up"), we shouldn't call drm_mode_set_crtcinfo() once the crtc timings have been decided. Since, it can cause settings to be unintentionally overwritten. So, since dm_state is never NULL now, we can use old_stream to determine if we should call drm_mode_set_crtcinfo() because we only need to set the crtc timing parameters for entirely new streams. Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink") Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/pm: Fix critical temp unit of SMU v13.0.6Asad Kamal1-4/+5
Critical Temperature needs to be reported in millidegree Celsius. Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Yang Wang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Remove SRAM clock gater override by driverMangesh Gadre1-9/+0
rlc firmware does required setting, driver need not do it. Signed-off-by: Mangesh Gadre <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Add bootloader status checkLijo Lazar3-3/+28
Add a function to wait till bootloader has reached steady state. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdkfd: use correct method to get clock under SRIOVHorace Chen1-6/+2
[What] Current SRIOV still using adev->clock.default_XX which gets from atomfirmware. But these fields are abandoned in atomfirmware long ago. Which may cause function to return a 0 value. [How] We don't need to check whether SR-IOV. For SR-IOV one-vf-mode, pm is enabled and VF is able to read dpm clock from pmfw, so we can use dpm clock interface directly. For multi-VF mode, VF pm is disabled, so driver can just react as pm disabled. One-vf-mode is introduced from GFX9 so it shall not have any backward compatibility issue. Signed-off-by: Horace Chen <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Unset baco dummy mode on nbio v7.9Lijo Lazar1-0/+18
BACO dummy mode could be set under reset conditions and that affects framebuffer access. Check If baco dummy mode is set, unset it if so. Signed-off-by: Lijo Lazar <[email protected]> Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: set minimum of VBlank_nomChunTao Tso1-1/+20
[Why] If VBlank_nom is too small, it will cause VStartUP_Start smaller than VBackPorch + VSync width which is an invalid case for VStartUP_Start and where to send AS-SDP. [How] Setup a minimum value to VBlank_nom Reviewed-by: Reza Amini <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: ChunTao Tso <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: Correct unit conversion for vstartupReza Amini1-1/+24
[why] vstartup is calculated to be a large number. it works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [how] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Kazlauskas Nicholas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: Roll back unit correctionOvidiu Bunea1-24/+1
[why] This Unit correction exposes a Replay corruption. [how] This reverts commit: commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Roll back unit conversion until Replay can fix their corruption. Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Reviewed-by: Reza Amini <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Ovidiu Bunea <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Enable ras for mp0 v13_0_6 sriovYiPeng Chai1-0/+1
Enable ras for mp0 v13_0_6 sriov Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Stanley.Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdkfd: retry after EBUSY is returned from hmm_ranges_get_pagesAlex Sierra1-0/+2
if hmm_range_get_pages returns EBUSY error during svm_range_validate_and_map, within the context of a page fault interrupt. This should retry through svm_range_restore_pages callback. Therefore we treat this as EAGAIN error instead, and defer it to restore pages fallback. Signed-off-by: Alex Sierra <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu/jpeg - skip change of power-gating state for sriovSamir Dhume1-2/+4
Powergating is handled in the host driver. Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Samir Dhume <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/pm: Add critical temp for GC v9.4.3Asad Kamal3-4/+55
Add critical temperature message support func for smu v13.0.6 and expose critical temperature as part of hw mon attributes for GC v9.4.3 v2: Added comment for pmfw version requirement & move the check to get_thermal_temperature_range function Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal2-3/+17
Update PMFW interface headers for updated metrics table and critical temperature message Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: update gc_info v2_1 from discoveryLe Ma3-0/+43
Several new fields are exposed in gc_info v2_1 Signed-off-by: Le Ma <[email protected]> Reviewed-by: Shiwu Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: update mall info v2 from discoveryLe Ma2-1/+12
Mall info v2 is introduced in ip discovery Signed-off-by: Le Ma <[email protected]> Reviewed-by: Shiwu Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu: Only support RAS EEPROM on dGPU platformCandice Li1-1/+2
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amdgpu/pm: Add notification for no DC supportBokun Zhang5-12/+11
- There is a DPM issue where if DC is not present, FCLK will stay at low level. We need to send a SMU message to configure the DPM - Reuse smu_v13_0_notify_display_change() for this purpose Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Bokun Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-31drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha3-1/+32
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds2-52/+20
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-30Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds413-7138/+12174
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...
Powered by cgit, Gruvboxed by Blaster4385.