aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23drm/amdgpu - Corrected the video codecs array name for yellow carpVeerabadhran Gopalakrishnan1-2/+2
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: report pcie bandwidth to the kfdJonathan Kim3-0/+64
Similar to xGMI reporting the min/max bandwidth between direct peers, PCIe will report the min/max bandwidth to the KFD. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: report xgmi bandwidth between direct peers to the kfdJonathan Kim5-0/+51
Report the min/max bandwidth in megabytes to the kfd for direct xgmi connections only. Indirect peers will report 0 since indirect route is unknown. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add psp command to get num xgmi links between direct peersJonathan Kim3-1/+37
The TA can now be invoked to provide the number of xgmi links connecting a direct source and destination peer. Non-direct peers will report zero links. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Fix documentaion for amdgpu_bo_add_to_shadow_listAnson Jacob1-1/+1
make htmldocs complaints about parameter for amdgpu_bo_add_to_shadow_list ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Excess function parameter 'bo' description in 'amdgpu_bo_add_to_shadow_list' ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Function parameter or member 'vmbo' not described in 'amdgpu_bo_add_to_shadow_list' ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Excess function parameter 'bo' description in 'amdgpu_bo_add_to_shadow_list' Signed-off-by: Anson Jacob <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/pm: Support board calibration on aldebaranLijo Lazar3-12/+40
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: change zstate allow msg conditionEric Yang3-25/+45
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Eric Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: 3.2.145Aric Cyr1-1/+1
DC version 3.2.145 brings improvements in multiple areas. In summary, we highlight: - Code improvements for passive - Cursor manipulation enhancements - Expand debug in some areas - Fix problems in DML - Other minor code refactors Reviewed-by: Anson Jacob <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: [FW Promotion] Release 0.0.75Anthony Koo1-23/+13
- Add reserved bits for future feature development - Fix issue with mismatch with type const - Replaced problematic code with old memcpy and casted problematic pointers to unsigned char pointers Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Refine condition for cursor visibilityKrunoslav Kovac2-3/+23
[why] There's a special case where upper plane is not the main plane. If it owns the cursor, it will be invisible in the majority of the screen. [How] The condition for disabling cursor is changed: - check if upper viewport completely covers current. This was the previous change that doesn't handle all scenarios with pipe splitting. - if not, show the cursor only if it's not scaled or no upper pipe. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Krunoslav Kovac <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy2-2/+10
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Bindu Ramamurthy <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: add workaround for riommu invalidation request hangEric Yang3-0/+29
[Why] When an riommu invalidation request come at the same time as a pipe is disabled there can be a case where DCN cannot ACK the request if only one VMID is setup in the inuse list. [How] Setup a second unused VMID will work around the issue. Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Eric Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Line Buffer changesNevenko Stupar4-19/+10
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nevenko Stupar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski1-1/+0
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Mikita Lipski <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: DCN2X Prefer ODM over bottom pipe to find second pipesunglee1-4/+4
[WHY] When finding a second pipe for pipe split, currently will look for bottom pipe in context first to decide the second pipe. This causes issues in 2 plane to 1 plane transitions like fullscreen video where bottom pipe no longer exists in the new configuration. [HOW] If previous context had an ODM pipe, use that to find the secondary pipe first before looking at bottom pipe. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: sunglee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Only set default brightness for OLEDCamille Cho1-3/+1
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas1-0/+1
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas2-55/+42
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy3-4/+14
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Bindu Ramamurthy <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas1-2/+4
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Enable eDP ILR on DCN2.1Michael Strauss1-1/+2
[WHY] Enable feature for 21.40 Reviewed-by: Sung Lee <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: 3.2.144Aric Cyr1-1/+1
Reviewed-by: Shahin Khayyer <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu1-1/+1
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Victor Lu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Fixed hardware power down bypass during headless bootJake Wang3-30/+27
[Why] During headless boot, DIG may be on which causes HW/SW discrepancies. To avoid this we power down hardware on boot if DIG is turned on. With introduction of multiple eDP, hardware power down is being bypassed under certain conditions. [How] Fixed hardware power down bypass, and ensured hardware will power down if DIG is on and seamless boot is not enabled. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jake Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Add copyright notice to new filesWesley Chalmers2-0/+50
Reviewed-by: Shahin Khayyer <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wesley Chalmers <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: Reduce delay when sink device not able to ACK 00340h writeZhan Liu3-3/+18
[Why] Theoretically, per DP 1.4a spec, sink device needs to AUX_ACK 00340h write. However, due to hardware limitation, some sink devices have no 00340h dpcd address at all. This results in sink side fails to reply ACK, and consequently cause source side keep retrying DPCD write on DPCD 00340h. This results in significant delay when DPCD 00340h write is triggered (e.g. at S3 resume). [How] Check whether sink device could ACK on DPCD 00340h write on boot. If sink device fails to ACK, then remember that, so we won't write to DPCD 00340h later on. There will be a drm.debug KMS level message to inform user once a 00340h DPCD write is skipped on purpose. Reviewed-by: Nikola Cornij <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Zhan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/display: add debug print for DCC validation failureAurabindo Pillai1-3/+3
[Why&How] Print a debug message when dcc validation fails in the display driver. Most DCC enablement related errors are from userspace. Adding a debug print in case of a failure from display driver will aid quicker triage. Reviewed-by: Harry Wentland <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23Merge tag 'drm-misc-next-2021-07-22' of ↵Dave Airlie1-5/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15-rc1: UAPI Changes: - Remove sysfs stats for dma-buf attachments, as it causes a performance regression. Previous merge is not in a rc kernel yet, so no userspace regression possible. Cross-subsystem Changes: - Sanitize user input in kyro's viewport ioctl. - Use refcount_t in fb_info->count - Assorted fixes to dma-buf. - Extend x86 efifb handling to all archs. - Fix neofb divide by 0. - Document corpro,gm7123 bridge dt bindings. Core Changes: - Slightly rework drm master handling. - Cleanup vgaarb handling. - Assorted fixes. Driver Changes: - Add support for ws2401 panel. - Assorted fixes to stm, ast, bochs. - Demidlayer ingenic irq. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-07-23Merge tag 'drm-misc-fixes-2021-07-22' of ↵Dave Airlie1-0/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * Return -ENOTTY for non-DRM ioctls * amdgpu: Fix COW checks * nouveau: init BO GME fields * panel: Avoid double free * ttm: Fix refcounting in ttm_global_init(); NULL checks * vc4: Fix interrupt handling Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-07-21drm/amdgpu - Corrected the video codecs array name for yellow carpVeerabadhran Gopalakrishnan1-2/+2
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Fix ASSR regression on embedded panelsStylon Wang1-3/+5
[Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Stylon Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-07-21drm/amdgpu: add yellow carp pci id (v2)Aaron Liu1-0/+4
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amdgpu: update yellow carp external rev_id handlingAaron Liu1-1/+4
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar3-12/+40
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: change zstate allow msg conditionEric Yang3-25/+45
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Eric Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy2-2/+10
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Bindu Ramamurthy <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Line Buffer changesNevenko Stupar4-19/+10
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nevenko Stupar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski1-1/+0
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Mikita Lipski <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Only set default brightness for OLEDCamille Cho1-3/+1
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas1-0/+1
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas2-55/+42
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy3-4/+14
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Bindu Ramamurthy <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas1-2/+4
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang6-2/+27
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Eric Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu1-1/+1
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Victor Lu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: 3.2.143Aric Cyr1-1/+1
Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: [FW Promotion] Release 0.0.73Anthony Koo1-3/+8
- Add reserved bits for future feature development - Fix issue with mismatch with type const Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: remove compbuf size waitDmytro Laktyushkin3-1/+3
This tends to take miliseconds in certain scenarios and we'd rather not wait that long. Due to how this interacts with det size update and locking waiting should not be necessary as compbuf updates before unlock. Add a watch for config error instead as that is something we actually do care about. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: Extend dmub_cmd_psr_copy_settings_data structIan Chen1-0/+4
Reserve padding bytes for new feature implementation Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Ian Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang6-2/+27
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Eric Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.