aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2020-03-10drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to ↵Hersen Wu3-13/+21
smu during boot up dc to pplib interface is changed for navi1x, renoir. display_config_changed is not called by dc anymore. smu_write_watermarks_table is not executed for navi1x, renoir during boot up. solution: call smu_write_watermarks_table just after dc pass watermark clock settings to pplib Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-09drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20Hawking Zhang1-2/+23
The ROMC_INDEX/DATA offset was changed to e4/e5 since from smuio_v11 (vega20/arcturus). Signed-off-by: Hawking Zhang <[email protected]> Tested-by: Candice Li <[email protected]> Reviewed-by: Candice Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-09drm/amd/display: update soc bb for nv14Martin Leung1-0/+114
[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by: Martin Leung <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume ↵Hersen Wu1-0/+69
from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang1-3/+3
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang2-4/+1
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic1-2/+2
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/display: Clear link settings on MST disable connectorBhawanpreet Lakha1-0/+1
[Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amdgpu: disable 3D pipe 1 on Navi1xTianci.Yin1-46/+51
[why] CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there is no use case. [how] Disable 3D pipe 1 on Navi1x. Reviewed-by: Feifei Xu <[email protected]> Reviewed-by: Monk Liu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amdgpu: clean wptr on wb when gpu recoveryYintian Tao2-0/+2
The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by: Yintian Tao <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Monk Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-26drm/amdgpu: Drop DRIVER_USE_AGPDaniel Vetter1-1/+1
This doesn't do anything except auto-init drm_agp support when you call drm_get_pci_dev(). Which amdgpu stopped doing with commit b58c11314a1706bf094c489ef5cb28f76478c704 Author: Alex Deucher <[email protected]> Date: Fri Jun 2 17:16:31 2017 -0400 drm/amdgpu: drop deprecated drm_get_pci_dev and drm_put_dev No idea whether this was intentional or accidental breakage, but I guess anyone who manages to boot a this modern gpu behind an agp bridge deserves a price. A price I never expect anyone to ever collect :-) Cc: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: Hawking Zhang <[email protected]> Cc: Xiaojie Yuan <[email protected]> Cc: Evan Quan <[email protected]> Cc: "Tianci.Yin" <[email protected]> Cc: "Marek Olšák" <[email protected]> Cc: Hans de Goede <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-25amdgpu/gmc_v9: save/restore sdpif regs during S3Shirish S3-1/+39
fixes S3 issue with IOMMU + S/G enabled @ 64M VRAM. Suggested-by: Alex Deucher <[email protected]> Signed-off-by: Shirish S <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-25drm/amdgpu: fix memory leak during TDR test(v2)Monk Liu1-1/+5
fix system memory leak v2: fix coding style Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-19drm/amdgpu/display: clean up hdcp workqueue handlingAlex Deucher1-4/+6
Use the existence of the workqueue itself to determine when to enable HDCP features rather than sprinkling asic checks all over the code. Also add a check for the existence of the hdcp workqueue in the irq handling on the off chance we get and HPD RX interrupt with the CP bit set. This avoids a crash if the driver doesn't support HDCP for a particular asic. Fixes: 96a3b32e67236f ("drm/amd/display: only enable HDCP for DCN+") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206519 Reviewed-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-19drm/amdgpu: add is_raven_kicker judgement for raven1changzhu1-2/+9
The rlc version of raven_kicer_rlc is different from the legacy rlc version of raven_rlc. So it needs to add a judgement function for raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc. Signed-off-by: changzhu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-14drm/amdgpu/gfx10: disable gfxoff when reading rlc clockAlex Deucher1-0/+2
Otherwise we readback all ones. Fixes rlc counter readback while gfxoff is active. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-14drm/amdgpu/gfx9: disable gfxoff when reading rlc clockAlex Deucher1-0/+2
Otherwise we readback all ones. Fixes rlc counter readback while gfxoff is active. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-14drm/amdgpu/soc15: fix xclk for ravenAlex Deucher1-1/+6
It's 25 Mhz (refclk / 4). This fixes the interpretation of the rlc clock counter. Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-14drm/amd/powerplay: always refetch the enabled features status on dpm enablementEvan Quan1-3/+3
Otherwise, the cached dpm features status may be inconsistent under some case(e.g. baco reset of Navi asic). Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-14drm/amd/display: fix dtm unloadingBhawanpreet Lakha1-1/+25
there was a type in the terminate command. We should be calling psp_dtm_unload() instead of psp_hdcp_unload() Fixes: 143f23053333 ("drm/amdgpu: psp DTM init") Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-14drm/amd/display: fix backwards byte order in rx_caps.Bhawanpreet Lakha1-2/+2
We were using incorrect byte order after we started using the drm_defines So fix it. Fixes: 02837a91ae75 ("drm/amd/display: add and use defines from drm_hdcp.h") Signed-off-by: JinZe.Xu <[email protected]> Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amdgpu:/navi10: use the ODCAP enum to index the caps arrayAlex Deucher1-11/+11
Rather than the FEATURE_ID flags. Avoids a possible reading past the end of the array. Reviewed-by: Evan Quan <[email protected]> Reported-by: Aleksandr Mezin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-11drm/amdgpu: update smu_v11_0_pptable.hAlex Deucher1-14/+32
Update to the latest changes. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-11drm/amdgpu: correct comment to clear up the confusionGuchun Chen1-1/+6
Former comment looks to be one intended behavior in code, actually it's not. So correct it. Suggested-by: Christian König <[email protected]> Signed-off-by: Guchun Chen <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: DCN2.x Do not program DPPCLK if same valueSung Lee1-1/+1
[WHY] Programming DPPCLK to the same value currently set may cause underflow while playing video in certain conditions. [HOW] Only program DPPCLK if clock is not the same as the previous value programmed. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Don't map ATOM_ENABLE to ATOM_INITNicholas Kazlauskas1-4/+0
[Why] In DCN hardware sequencer we do actually call ATOM_INIT correctly per pipe. The workaround is not necessary for command table offloading. [How] Drop the workaround since it's not needed. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Chris Park <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amdgpu/vcn2.5: fix warningJames Zhu1-1/+1
Fix warning during switching to dpg pause mode for VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16 Signed-off-by: James Zhu <[email protected]> Acked-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amdgpu: limit GDS clearing workaround in cold boot sequenceGuchun Chen1-3/+6
GDS clear workaround will cause gfx failure in suspend/resume case. [ 98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110 [ 98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110 [ 98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110 As this workaround is specific to the HW bug of GDS's ECC error existing in cold boot up, so bypass this workaround in suspend/ resume case after booting up. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->confJonathan Kim1-7/+8
hwc->conf was designated specifically for AMD APU IOMMU purposes. This could cause problems in performance and/or function since APU IOMMU implementation is elsewhere. Also hwc->conf and hwc->config are different members of an anonymous union so hwc->conf aliases as hw->last_tag. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11amdgpu: Prevent build errors regarding soft/hard-float FP ABI tagsDaniel Kolesa1-0/+6
On PowerPC, the compiler will tag object files with whether they use hard or soft float FP ABI and whether they use 64 or 128-bit long double ABI. On systems with 64-bit long double ABI, a tag will get emitted whenever a double is used, as on those systems a long double is the same as a double. This will prevent linkage as other files are being compiled with hard-float. On ppc64, this code will never actually get used for the time being, as the only currently existing hardware using it are the Renoir APUs. Therefore, until this is testable and can be fixed properly, at least make sure the build will not fail. Signed-off-by: Daniel Kolesa <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amdgpu/vcn2.5: fix DPG mode power off issue on instance 1James Zhu4-14/+15
Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode power off issue on instance 1. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Add initialitions for PLL2 clock sourceIsabel Zhang1-0/+6
[Why] Starting from 14nm, the PLL is built into the PHY and the PLL is mapped to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not initialized. This causes DP to HDMI dongle to not light up the display. [How] Initializations added for PLL2 when creating resources. Signed-off-by: Isabel Zhang <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Limit minimum DPPCLK to 100MHz.Yongqiang Sun1-0/+6
[Why] Underflow is observed when plug in a 4K@60 monitor with 1366x768 eDP due to DPPCLK is too low. [How] Limit minimum DPPCLK to 100MHz. Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Check engine is not NULL before acquiringAric Cyr1-1/+1
[Why] Engine can be NULL in some cases, so we must not acquire it. [How] Check for NULL engine before acquiring. Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Use dcfclk to populate watermark rangesSung Lee1-7/+7
[WHY & HOW] Previously drain clk was unconstrained and fill clk was constrained on fclk. We want to change it to fill clk unconstrained and drain clock constrained to dcfclk. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Do not set optimized_require to false after plane disableSung Lee1-1/+0
[WHY] The optimized_require flag is needed to set watermarks and clocks lower in certain conditions. This flag is set to true and then set to false while programming front end in dcn20. [HOW] Do not set the flag to false while disabling plane. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-11drm/amd/display: Fix psr static frames calculationRoman Li1-2/+3
[Why] Driver crash with psr feature enabled due to divide-by-zero error. This is a regression after rework to calculate static screen frame number entry time. [How] Correct order of operations to avoid divide-by-zero. Signed-off-by: Roman Li <[email protected]> Reviewed-by: Zhan Liu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-07Merge tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds98-858/+4331
Pull drm fixes from Dave Airlie: "Just some fixes for this merge window: the tegra changes fix some regressions in the merge, nouveau has a few modesetting fixes. The amdgpu fixes are bit bigger, but they contain a couple of weeks of fixes, and don't seem to contain anything that isn't really a fix. Summary: tegra: - merge window regression fixes nouveau: - couple of volta/turing modesetting fixes amdgpu: - EDC fixes for Arcturus - GDDR6 memory training fixe - Fix for reading gfx clockgating registers while in GFXOFF state - i2c freq fixes - Misc display fixes - TLB invalidation fix when using semaphores - VCN 2.5 instancing fixes - Switch raven1 gfxoff to a blacklist - Coreboot workaround for KV/KB - Root cause dongle fixes for display and revert workaround - Enable GPU reset for renoir and navi - Navi overclocking fixes - Fix up confusing warnings in display clock validation on raven amdkfd: - SDMA fix radeon: - Misc LUT fixes" * tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm: (90 commits) gpu: host1x: Set DMA direction only for DMA-mapped buffer objects drm/tegra: Reuse IOVA mapping where possible drm/tegra: Relax IOMMU usage criteria on old Tegra drm/amd/dm/mst: Ignore payload update failures drm/amdgpu: update default voltage for boot od table for navi1x drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2) drm/amdgpu: fetch default VDDC curve voltages (v2) drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2) drm/amdgpu/navi10: add OD_RANGE for navi overclocking drm/amdgpu/navi: fix index for OD MCLK drm/amd/display: Fix HW/SW state mismatch drm/amd/display: Fix a typo when computing dsc configuration drm/amd/powerplay: fix navi10 system intermittent reboot issue V2 drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode drm/amd/display: Only enable cursor on pipes that need it drm/nouveau/kms/gv100-: avoid sending a core update until the first modeset drm/nouveau/kms/gv100-: move window ownership setup into modesetting path drm/nouveau/disp/gv100-: halt NV_PDISP_FE_RM_INTR_STAT_CTRL_DISP_ERROR storms ...
2020-02-04drm/amd/dm/mst: Ignore payload update failuresLyude Paul1-9/+4
Disabling a display on MST can potentially happen after the entire MST topology has been removed, which means that we can't communicate with the topology at all in this scenario. Likewise, this also means that we can't properly update payloads on the topology and as such, it's a good idea to ignore payload update failures when disabling displays. Currently, amdgpu makes the mistake of halting the payload update process when any payload update failures occur, resulting in leaving DC's local copies of the payload tables out of date. This ends up causing problems with hotplugging MST topologies, and causes modesets on the second hotplug to fail like so: [drm] Failed to updateMST allocation table forpipe idx:1 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1511 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O) rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core rtsx_pci pinctrl_amd CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4 Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019 RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000 RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002 FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0 Call Trace: ? mutex_lock+0xe/0x30 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] ? dm_read_reg_func+0x39/0xb0 [amdgpu] ? core_link_enable_stream+0x656/0x730 [amdgpu] core_link_enable_stream+0x656/0x730 [amdgpu] dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] dc_commit_state+0x292/0x770 [amdgpu] ? add_timer+0x101/0x1f0 ? ttm_bo_put+0x1a1/0x2f0 [ttm] amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] ? ttm_bo_validate+0x134/0x150 [ttm] ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] ? _cond_resched+0x15/0x30 ? wait_for_completion_timeout+0x38/0x160 ? _cond_resched+0x15/0x30 ? wait_for_completion_interruptible+0x33/0x190 commit_tail+0x94/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] drm_mode_setcrtc+0x194/0x6a0 [drm] ? _cond_resched+0x15/0x30 ? mutex_lock+0xe/0x30 ? drm_mode_getcrtc+0x180/0x180 [drm] drm_ioctl_kernel+0xaa/0xf0 [drm] drm_ioctl+0x208/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x458/0x6d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fab2121f87b Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10 R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280 ---[ end trace 6ea888c24d2059cd ]--- Note as well, I have only been able to reproduce this on setups with 2 MST displays. Changes since v1: * Don't return false when part 1 or part 2 of updating the payloads fails, we don't want to abort at any step of the process even if things fail Reviewed-by: Mikita Lipski <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Acked-by: Harry Wentland <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu: update default voltage for boot od table for navi1xAlex Deucher1-1/+8
It needed to be updated as well so it will show the proper values if you reset to the defaults. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltageAlex Deucher1-3/+5
Cull out 0 clocks to avoid a warning in DC. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latencyAlex Deucher1-6/+9
Only send non-0 clocks to DC for validation. This mirrors what the windows driver does. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)Alex Deucher1-11/+23
We might get different numbers of clocks from powerplay depending on what the OEM has populated. v2: add assert for at least one level Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu: fetch default VDDC curve voltages (v2)Alex Deucher1-1/+49
Ask the SMU for the default VDDC curve voltage values. This properly reports the VDDC values in the OD interface. v2: only update if the original values are 0 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2)Matt Coffin4-20/+22
Previously, the syfs functionality for restoring the default powerplay table was sourcing it's information from the currently-staged powerplay table. This patch adds a step to cache the first overdrive table that we see on boot, so that it can be used later to "restore" the powerplay table v2: sqaush my original with Matt's fix Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Signed-off-by: Matt Coffin <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/navi10: add OD_RANGE for navi overclockingAlex Deucher1-0/+59
So users can see the range of valid values. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/navi: fix index for OD MCLKAlex Deucher1-1/+1
You can only adjust the max mclk, not the min. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amd/display: Fix HW/SW state mismatchBhawanpreet Lakha1-0/+19
[Why] When we disable a connector we don't explicitly remove it from the module so the display is still cached(SW) in the hdcp_module. SST: no issues because we can only have 1 display per link MST: We have x displays per link, now if we disable 1 we don't remove it from the module so the module has x display cached(SW). If we try to enable HDCP, psp verification will fail because we are reporting x displays while the HW only has x-1 display enabled [How] Check the callback for when we disable stream and call remove display. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amd/display: Fix a typo when computing dsc configurationMikita Lipski1-1/+1
[why] Remove a backslash symbol accidentally left in increase bpp function when computing mst dsc configuration. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Zhan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amd/powerplay: fix navi10 system intermittent reboot issue V2Evan Quan6-1/+86
This workaround is needed only for Navi10 12 Gbps SKUs. V2: added SMU firmware version guard Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.