Age | Commit message (Collapse) | Author | Files | Lines |
|
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected] # 6.5.x
Cc: Tsung-hua Lin <[email protected]>
Cc: Chris Chi <[email protected]>
Reviewed-by: Wayne Lin <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Ryan Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The adev can be found from bo by amdgpu_ttm_adev(bo->tbo.bdev),
and adev is also not used in the function
amdgpu_amdkfd_map_gtt_bo_to_gart().
Signed-off-by: Eric Huang <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix mask used for esm ctrl register to get pcie link
speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6
Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support")
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Fixes: f1c378593153 ("drm/amd/powerplay: add Arcturus support for gpu metrics export")
Signed-off-by: Asad Kamal <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Le Ma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Skip reporting pcie link width/speed on vfs for
smu_v13_0_6 & smu_v13_0_2
Signed-off-by: Asad Kamal <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1:
enabel pp_od_clk_voltage node for gfx 9.4.3 SRIOV and BM.
v2:
add onevf check for gfx 9.4.3
v3:
refine code check order to make function clearly.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86.
This causes hangs on SI when DC is enabled and errors on driver
reboot and power off cycles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3216
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2755
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It's unreasonable to use 0 as the power1_min_cap when
OD is disabled. So, use the same lower limit as the value
used when OD is enabled.
Fixes: 1958946858a6 ("drm/amd/pm: Support for getting power1_cap_min value")
Signed-off-by: Ma Jun <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <[email protected]>
Cc: Roman Li <[email protected]>
Cc: Qingqing Zhuo <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Suggested-by: Roman Li <[email protected]>
Reviewed-by: Roman Li <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86.
This causes hangs on SI when DC is enabled and errors on driver
reboot and power off cycles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3216
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2755
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This ensures that the memory mapped by ioremap for adev->rmmio, is
properly handled in amdgpu_device_init(). If the function exits early
due to an error, the memory is unmapped. If the function completes
successfully, the memory remains mapped.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Jammy Zhou <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
On SOCs with SMUv13.0.6, mode-2 reset takes a bit longer. Wait for 200ms
before trying to restore config space after mode-2 reset.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This vendor specific property has never been used by userspace
software and conflicts with the panel_power_savings sysfs file.
That is a compositor and user could fight over the same data.
Fixes: 63d0b87213a0 ("drm/amd/display: add panel_power_savings sysfs entry to eDP connectors")
Suggested-by: Harry Wentland <[email protected]>
Cc: Hamza Mahfooz <[email protected]>
Cc: "Sun peng Li (Leo)" <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
On devices which have multi-partition nodes, keep partition id in
location_id[31:28].
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Jonathan Kim <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch fixes a MES firmware boot failure issue
when backdoor loading the MES firmware.
MES firmware runtime DRAM size is changed to 512k,
the driver needs to reserve this amount of memory in
FB, otherwise adjacent memory will be overwritten by
the MES firmware startup code.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It's unreasonable to use 0 as the power1_min_cap when
OD is disabled. So, use the same lower limit as the value
used when OD is enabled.
Fixes: 1958946858a6 ("drm/amd/pm: Support for getting power1_cap_min value")
Signed-off-by: Ma Jun <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
VF should not program this register.
Signed-off-by: Victor Lu <[email protected]>
Reviewed-by: Zhigang Luo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Check amdgpu_ras_mask to fix ineffective ras_mask setting
due to special asic without sram ecc enable but with poison
supported.
Signed-off-by: Stanley.Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For a RAS error that needs a full reset to recover, set the fatal error
status. Clear the status once the device is reset.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <[email protected]>
Cc: Roman Li <[email protected]>
Cc: Qingqing Zhuo <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Suggested-by: Roman Li <[email protected]>
Reviewed-by: Roman Li <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Fangrui Song <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Mykola Lysenko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[ +0.000010] #PF: supervisor read access in kernel mode
[ +0.000005] #PF: error_code(0x0000) - not-present page
[ +0.000004] PGD 0 P4D 0
[ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[ +0.000003] PKRU: 55555554
[ +0.000003] Call Trace:
[ +0.000006] <TASK>
[ +0.000006] ? __die+0x23/0x70
[ +0.000011] ? page_fault_oops+0x17d/0x4c0
[ +0.000008] ? preempt_count_add+0x6e/0xa0
[ +0.000008] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000011] ? exc_page_fault+0x7f/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? i2c_transfer+0xd/0x100
[ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[ +0.000067] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm]
[ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000042] edid_block_read+0x3b/0xd0 [drm]
[ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm]
[ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm]
[ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[ +0.000000] status_store+0xb2/0x1f0 [drm]
[ +0.000000] kernfs_fop_write_iter+0x136/0x1d0
[ +0.000000] vfs_write+0x24d/0x440
[ +0.000000] ksys_write+0x6f/0xf0
[ +0.000000] do_syscall_64+0x60/0xc0
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ +0.000000] RIP: 0033:0x7f9ad46b4b00
[ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[ +0.000000] </TASK>
[ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[ +0.000000] usb_common crct10dif_common video wmi
[ +0.000000] CR2: 00000000000004c0
[ +0.000000] ---[ end trace 0000000000000000 ]---
Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Swapnil Patel <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <[email protected]>
Cc: Hersen Wu <[email protected]>
Cc: Josip Pavic <[email protected]>
Cc: Roman Li <[email protected]>
Cc: Qingqing Zhuo <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Tom Chung <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <[email protected]> # v6.6+
Cc: Mario Limonciello <[email protected]>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Lewis Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <[email protected]>
Reviewed-by: Aurabindo Pillai <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[ +0.000010] #PF: supervisor read access in kernel mode
[ +0.000005] #PF: error_code(0x0000) - not-present page
[ +0.000004] PGD 0 P4D 0
[ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[ +0.000003] PKRU: 55555554
[ +0.000003] Call Trace:
[ +0.000006] <TASK>
[ +0.000006] ? __die+0x23/0x70
[ +0.000011] ? page_fault_oops+0x17d/0x4c0
[ +0.000008] ? preempt_count_add+0x6e/0xa0
[ +0.000008] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000011] ? exc_page_fault+0x7f/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? i2c_transfer+0xd/0x100
[ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[ +0.000067] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm]
[ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000042] edid_block_read+0x3b/0xd0 [drm]
[ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm]
[ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm]
[ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[ +0.000000] status_store+0xb2/0x1f0 [drm]
[ +0.000000] kernfs_fop_write_iter+0x136/0x1d0
[ +0.000000] vfs_write+0x24d/0x440
[ +0.000000] ksys_write+0x6f/0xf0
[ +0.000000] do_syscall_64+0x60/0xc0
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ +0.000000] RIP: 0033:0x7f9ad46b4b00
[ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[ +0.000000] </TASK>
[ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[ +0.000000] usb_common crct10dif_common video wmi
[ +0.000000] CR2: 00000000000004c0
[ +0.000000] ---[ end trace 0000000000000000 ]---
Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to add vcn 4.0.6 support
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.
Acked-by: Alex Deucher <[email protected]>
Suggested-by: Lukas Wunner <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enabled the VCN Power Gating and Clock Gating flags for VCN 4.0.6.
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The is_psr_su parameter is a boolean flag indicating whether the Panel
Self Refresh Selective Update (PSR SU) feature is enabled which is a
power-saving feature that allows only the updated regions of the screen
to be refreshed, reducing the amount of data that needs to be sent to
the display.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects'
Fixes: d16df040c8da ("drm/amdgpu: make damage clips support configurable")
Cc: [email protected]
Cc: Hamza Mahfooz <[email protected]>
Cc: Mario Limonciello <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
obviously safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Lenko Donchev <[email protected]>
Signed-off-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Updated Query Video codecs for VCN 406
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Modified driver to use the appropriate FW files and instance.
v2: squash in fixes (Alex)
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable support for multi instance on JPEG 4.0.6.
v2: squash in fixes (Alex)
Signed-off-by: Saleemkhan Jamadar <[email protected]>
Reviewed-by: Veerabadhran Gopalakrishnan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Prevent dropping the KFD process reference at the end of a debug
IOCTL call where the acquired process value is an error.
Signed-off-by: Jonathan Kim <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Under SRIOV, programming to VM_CONTEXT*_CNTL regs failed because the
current macro does not pass through the correct xcc instance.
Use the *REG32_XCC macro in this case.
The behaviour without SRIOV is the same without this patch.
Signed-off-by: Victor Lu <[email protected]>
Reviewed-by: Zhigang Luo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|