aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-01-29drm/amd/display: Fix DPSTREAM CLK on and off sequenceDmytro Laktyushkin2-7/+6
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix invalid reg access on DCN35 FPGAEric Yang2-4/+23
[Why] Unguarded SMU and CLK IP access cause issue on FPGA [How] Guard them for FPGA environment Reviewed-by: Sung joon Kim <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Eric Yang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: refine code for dmcub inbox1 ring buffer debugFudongwang2-9/+5
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Fudongwang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Send DTBCLK disable message on first commitTaimur Hassan1-0/+1
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix USB-C flag update after enc10 feature initCharlene Liu2-4/+4
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: add debugfs disallow edp psrHersen Wu4-2/+67
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by: Wayne Lin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: For FPO and SubVP/DRR configs program vmin/max selAlvin Lee9-25/+56
[Why & How] For FPO and SubVP/DRR cases we need to ensure to program OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP / DRR cases will not have any effect and we could hit underflow / corruption. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Unify optimize_required flags and VRR adjustmentsAric Cyr5-17/+10
[why] There is only a single call to dc_post_update_surfaces_to_stream so there is no need to have two flags to control it. Unifying this to a single flag allows dc_stream_adjust_vmin_vmax to skip actual programming when there is no change required. [how] Remove wm_optimze_required flag and set only optimize_required in its place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing range matches the requested one and skip programming if they are equal. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhzSohaib Nadeem1-1/+1
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Sohaib Nadeem <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Wait for mailbox ready when powering up DMCUBNicholas Kazlauskas1-2/+11
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Wait before sending idle allow and after idle disallowNicholas Kazlauskas1-1/+6
[Why] We want acknowledgment of the driver idle disallow from DMCUB before continuing with any further programming. For idle allow we want to minimize the chance of DMCUB actively interacing with other firmware components on the system (eg. PMFW) at the same time. [How] Ensure that DMCUB isn't in the middle of processing other command submissions prior to allowing idle and after disallowing idle by inserting a wait before the allow and by changing the wait type for the idle disallow. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Revert "drm/amd/display: initialize all the dpm level's stutter latency"Charlene Liu1-3/+1
Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix static screen event mask definition changeYiling Chen10-27/+28
[why] The static screen event mask definition is different betwnn DCN31 after and before. [how] Rename DCN30_set_static_screen_control to DCN31. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Yiling Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Introduce a simple contribution list for display codeRodrigo Siqueira1-110/+0
This commit adds a contribution list for display under the kernel documentation with some first suggestions. It also drops an old TODO list from the display folder. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add entry for the DIO componentRodrigo Siqueira1-0/+10
Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add entry for OPP in the kernel docRodrigo Siqueira1-0/+16
Introduce OPP as part of the kernel documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add kernel doc entry for MPCRodrigo Siqueira1-77/+173
This commit adds a kernel-doc entry for the MPC block. Since it enabled the kernel-doc to parse some of the documentation in the mpc.h file, fixing some of the comments was required. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add kernel doc entry for DPPRodrigo Siqueira1-0/+25
This commit introduces basic DPP information and the struct scan for code documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amdkfd: Use correct drm device for cgroup permission checkMukul Joshi1-2/+7
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from XCP manager when checking for cgroup permissions. Signed-off-by: Mukul Joshi <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amdkfd: Use S_ENDPGM_SAVED in trap handlerJay Cornwall3-9/+9
This instruction has no functional difference to S_ENDPGM but allows performance counters to track save events correctly. Signed-off-by: Jay Cornwall <[email protected]> Reviewed-by: Laurent Morichetti <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amdkfd: Correct partial migration virtual addrPhilip Yang1-1/+1
Partial migration to system memory should use migrate.addr, not prange->start as virtual address to allocate system memory page. Fixes: a546a2768440 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM") Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Xiaogang Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amdgpu: move the drm client creation behind drm device registrationLe Ma3-11/+27
This patch is to eliminate interrupt warning below: "[drm] Fence fallback timer expired on ring sdma0.0". An early vm pt clearing job is sent to SDMA ahead of interrupt enabled. And re-locating the drm client creation following after drm_dev_register looks like a more proper flow. v2: wrap the drm client creation Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles") Signed-off-by: Le Ma <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix potential NULL pointer dereferences in ↵Srinivasan Shanmugam1-2/+5
'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) Fixes: ddef02de0d71 ("drm/amd/display: add null checks before logging") Cc: Wyatt Wood <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/include: Add missing registers/mask for DCN316 and 350Rodrigo Siqueira4-0/+103
Cc: Jun Lei <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add simple doc page for DCHUBBUBRodrigo Siqueira1-0/+6
Enable the documentation to extract code documentation from dchubbub.h file. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add basic page for HUBPRodrigo Siqueira1-1/+12
Create the HUBP documentation page and add the doc references to extract the HUBP code documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Revert "drm/amd/pm: fix the high voltage and temperature issue"Mario Limonciello5-63/+11
This reverts commit 5f38ac54e60562323ea4abb1bfb37d043ee23357. This causes issues with rebooting and the 7800XT. Cc: Kenneth Feng <[email protected]> Cc: [email protected] Fixes: 5f38ac54e605 ("drm/amd/pm: fix the high voltage and temperature issue") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062 Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Merge drm/drm-next into drm-misc-nextMaxime Ripard434-4510/+12510
Kickstart 6.9 development cycle. Signed-off-by: Maxime Ripard <[email protected]>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li1-1/+2
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li1-0/+1
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li1-1/+4
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso4-0/+57
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <[email protected]> Acked-by: Roman Li <[email protected]> Signed-off-by: ChunTao Tso <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Add IPS checks before dcn register accessRoman Li1-10/+6
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Roman Li <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee1-0/+1
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas3-1/+11
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher2-1/+2
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher2-1/+2
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis1-0/+8
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.7.x
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar1-0/+1
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.7.x
2024-01-25drm/amdgpu: Fix null pointer dereferenceHawking Zhang1-1/+1
amdgpu_reg_state_sysfs_fini could be invoked at the time when asic_func is even not initialized, i.e., amdgpu_discovery_init fails for some reason. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-01-25drm/amdgpu: Show vram vendor only if availableLijo Lazar1-1/+16
Ony if vram vendor info is available, show in sysfs. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.7.x
2024-01-25drm/amd/pm: update the power cap settingKenneth Feng2-4/+104
update the power cap setting for smu_v13.0.0/smu_v13.0.7 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356 Signed-off-by: Kenneth Feng <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-01-25drm/amdgpu: Avoid fetching vram vendor informationLijo Lazar1-1/+2
For GFX 9.4.3 APUs, the current method of fetching vram vendor information is not reliable. Avoid fetching the information. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.7.x
2024-01-25drm/amdgpu/pm: Fix the power source flag errorMa Jun3-10/+7
The power source flag should be updated when [1] System receives an interrupt indicating that the power source has changed. [2] System resumes from suspend or runtime suspend Signed-off-by: Ma Jun <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-01-25drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() ↵Srinivasan Shanmugam1-2/+2
& write_dpcd()' functions The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: [email protected] Cc: Jerry Zuo <[email protected]> Cc: Jun Lei <[email protected]> Cc: Wayne Lin <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Hamza Mahfooz <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/pm: udpate smu v13.0.6 message permissionYang Wang1-2/+2
update smu v13.0.6 message to allow guest driver set gfx clock. Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25amdgpu/drm: Use vram manager for virtualization page retirementVictor Skvortsov1-10/+20
In runtime, use vram manager for virtualization page retirement. Signed-off-by: Victor Skvortsov <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amdgpu: Add RAS_POISON_READY host response messageVictor Skvortsov2-0/+7
In a non-FLR page avoidance scenario, the host driver will provide the bad pages in the pf2vf exchange region. Adding a new host response message to indicate when the pf2vf exchange region has been updated. Signed-off-by: Victor Skvortsov <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amdgpu: Support passing poison consumption ras block to SRIOVYiPeng Chai13-22/+49
Support passing poison consumption ras blocks to SRIOV. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li1-1/+2
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.