aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-02-07drm/amd/display: Disable ODM by default for DCN35Rodrigo Siqueira1-0/+1
Just ensure that ODM optimization is disabled by default. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Update phantom pipe enable / disable sequenceAlvin Lee10-13/+94
Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: [email protected] # 6.6+ Reviewed-by: Samson Tam <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo1-5/+7
The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: [email protected] # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Fix shared buff copy to userStanley.Yang1-1/+1
ta if invoke node buffer |-------- ta type ----------| |-------- ta id ----------| |-------- cmd id ----------| |------ shared buf len -----| |------ shared buffer ------| ta if invoke node buffer is as above, copy shared buffer data to correct location Signed-off-by: Stanley.Yang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Increase eval/entry delay for DCN35Nicholas Kazlauskas1-2/+2
[Why] To match firmware measurements and avoid hanging when accessing HW that's in idle. [How] Increase the delays to what we've measured. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: remove asymmetrical irq disabling in jpeg 4.0.5 suspendLi Ma2-19/+0
A supplement to commit: 615dd56ac5379f4239940be69139a33e79e59c67 There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume. Fixes: 615dd56ac537 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend") Signed-off-by: Li Ma <[email protected]> Acked-By: Saleemkhan Jamadar <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Reviewed-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: reset gpu for s3 suspend abort casePrike Liang1-0/+22
In the s3 suspend abort case some type of gfx9 power rail not turn off from FCH side and this will put the GPU in an unknown power status, so let's reset the gpu to a known good power state before reinitialize gpu device. Signed-off-by: Prike Liang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: skip to program GFXDEC registers for suspend abortPrike Liang3-0/+12
In the suspend abort cases, the gfx power rail doesn't turn off so some GFXDEC registers/CSB can't reset to default value and at this moment reinitialize GFXDEC/CSB will result in an unexpected error. So let skip those program sequence for the suspend abort case. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: set odm_combine_policy based on context in dcn32 resourceWenjing Liu3-17/+34
[why] When populating dml pipes, odm combine policy should be assigned based on the pipe topology of the context passed in. DML pipes could be repopulated multiple times during single validate bandwidth attempt. We need to make sure that whenever we repopulate the dml pipes it is always aligned with the updated context. There is a case where DML pipes get repopulated during FPO optimization after ODM combine policy is changed. Since in the current code we reinitlaize ODM combine policy, even though the current context has ODM combine enabled, we overwrite it despite the pipes are already split. This causes DML to think that MPC combine is used so we mistakenly enable MPC combine because we apply pipe split with ODM combine policy reset. This issue doesn't impact non windowed MPO with ODM case because the legacy policy has restricted use cases. We don't encounter the case where both ODM and FPO optimizations are enabled together. So we decide to leave it as is because it is about to be replaced anyway. Cc: [email protected] # 6.6+ Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'Srinivasan Shanmugam1-10/+14
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'Srinivasan Shanmugam1-19/+20
'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Fix HDP flush for VFs on nbio v7.9Lijo Lazar1-0/+6
HDP flush remapping is not done for VFs. Keep the original offsets in VF environment. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Implement bounds check for stream encoder creation in DCN301Srinivasan Shanmugam1-1/+1
'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn301_stream_encoder_create reported by Smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Increase frame-larger-than for all display_mode_vba filesNathan Chancellor1-3/+3
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y and CONFIG_WERROR=y enabled) has a few new instances of -Wframe-larger-than for the mode support and system configuration functions: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. Without the sanitizers enabled, there are no warnings. This was the catalyst for commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2") and that same change was made to dml in commit 5b750b22530f ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml") but the frame_warn_flag variable was not applied to all files. Do so now to clear up the warnings and make all these files consistent. Cc: [email protected] Closes: https://github.com/ClangBuiltLinux/linux/issue/1990 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Clear phantom stream count and plane countMario Limonciello1-0/+3
When dc_state_destruct() was refactored the new phantom_stream_count and phantom_plane_count members weren't cleared. Fixes: 012a04b1d6af ("drm/amd/display: Refactor phantom resource allocation") Acked-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Simplify the calculation of variablesJiapeng Chong1-1/+1
./drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c:236:49-51: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8169 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Avoid fetching VRAM vendor infoLijo Lazar1-8/+0
The present way to fetch VRAM vendor information turns out to be not reliable on GFX 9.4.3 dGPUs as well. Avoid using the data. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: 3.2.271Aric Cyr1-1/+1
This version brings along the following: - DCN35 fixes - DMUB fixes - Link training fixes - Misc code style fixes - MST fixes - ODM fixes - SubVP fixes Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Drop some unnecessary guardsRodrigo Siqueira8-16/+0
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code, which may cause confusion. This commit dropped some of the unnecessary guards. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Trivial code style adjustmentRodrigo Siqueira2-2/+4
Just adjust the code indentation in the header and add a simple comment in the dm_cp_psp file. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Disable ODM by default for DCN35Rodrigo Siqueira1-0/+1
Just ensure that ODM optimization is disabled by default. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Drop legacy codeRodrigo Siqueira10-57/+0
Display code keeps getting improvements, and because of that, some legacy code is left behind. This commit drops some of those unused codes. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Update phantom pipe enable / disable sequenceAlvin Lee10-13/+94
Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: [email protected] # 6.6+ Reviewed-by: Samson Tam <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07Revert "drm/amd/display: For FPO and SubVP/DRR configs program vmin/max sel"Alvin Lee12-66/+41
This reverts commit 6b2b782ad6a25734ae847d1659bea3f613dbb563. Since, it was causing regression for some DRR scenarios. Reviewed-by: Aric Cyr <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Adjust set_p_state calls to fix loggingEthan Bitnun1-11/+11
Update the p_state type before update_clocks is called to ensure accurate values are used for logging. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Ethan Bitnun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add delay before logging clks from hwEthan Bitnun1-0/+2
Add a small delay before reading clks from hw, to ensure correct values are used for logging. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Ethan Bitnun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo1-5/+7
The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: [email protected] # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: correct comment in set_default_brightness_aux()Camille Cho1-1/+1
0 nits is a valid default value for OLED panels. So, update the relevant comment to account for that fact. Reviewed-by: Krunoslav Kovac <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitGeorge Shen5-1/+53
[Why] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [How] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: George Shen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add debug option to force 1-tap chroma subsamplingGeorge Shen2-0/+8
[Why] Default driver behaviour is 3-tap subsampling, so we should keep it the same for test patterns as well. However, it is also useful to force 1-tap subsampling for testing purposes. Reviewed-by: Michael Strauss <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: George Shen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Disable idle reallow as part of command/gpint executionNicholas Kazlauskas3-2/+4
[Why] Workaroud for a race condition where DMCUB is in the process of committing to IPS1 during the handshake causing us to miss the transition into IPS2 and touch the INBOX1 RPTR causing a HW hang. [How] Disable the reallow to ensure that we have enough of a gap between entry and exit and we're not seeing back-to-back wake_and_executes. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Fix shared buff copy to userStanley.Yang1-1/+1
ta if invoke node buffer |-------- ta type ----------| |-------- ta id ----------| |-------- cmd id ----------| |------ shared buf len -----| |------ shared buffer ------| ta if invoke node buffer is as above, copy shared buffer data to correct location Signed-off-by: Stanley.Yang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Increase eval/entry delay for DCN35Nicholas Kazlauskas1-2/+2
[Why] To match firmware measurements and avoid hanging when accessing HW that's in idle. [How] Increase the delays to what we've measured. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Disable timeout in more places for dc_dmub_srvNicholas Kazlauskas1-3/+10
[Why] We're still missing a few and we'd like to avoid continuining when a hang occurs for debug purposes. [How] Add the loop anywhere we try to wait on rptr == wptr in dc_dmub_srv. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Fix potential out-of-bounds access in ↵Srinivasan Shanmugam1-3/+3
'amdgpu_discovery_reg_base_init()' The issue arises when the array 'adev->vcn.vcn_config' is accessed before checking if the index 'adev->vcn.num_vcn_inst' is within the bounds of the array. The fix involves moving the bounds check before the array access. This ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array before it is used as an index. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use. Fixes: a0ccc717c4ab ("drm/amdgpu/discovery: validate VCN and SDMA instances") Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/pm: Retrieve UMC ODECC error count from aca bankCandice Li1-1/+5
Instead of software managed counters. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add more checks for exiting idle in DCNicholas Kazlauskas4-0/+63
[Why] Any interface that touches registers needs to wake up the system. [How] Add a new interface dc_exit_ips_for_hw_access that wraps the check for IPS support and insert it into the public DC interfaces that touch registers. We don't re-enter, since we expect that the enter/exit to have been done on the DM side. Cc: [email protected] # 6.1+ Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: correct static screen event maskAllen Pan4-4/+24
[Why] Hardware register definition changed Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Allen Pan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: remove asymmetrical irq disabling in jpeg 4.0.5 suspendLi Ma2-19/+0
A supplement to commit: 615dd56ac5379f4239940be69139a33e79e59c67 There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume. Fixes: 615dd56ac537 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend") Signed-off-by: Li Ma <[email protected]> Acked-By: Saleemkhan Jamadar <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Reviewed-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: reset gpu for s3 suspend abort casePrike Liang1-0/+22
In the s3 suspend abort case some type of gfx9 power rail not turn off from FCH side and this will put the GPU in an unknown power status, so let's reset the gpu to a known good power state before reinitialize gpu device. Signed-off-by: Prike Liang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: skip to program GFXDEC registers for suspend abortPrike Liang3-0/+12
In the suspend abort cases, the gfx power rail doesn't turn off so some GFXDEC registers/CSB can't reset to default value and at this moment reinitialize GFXDEC/CSB will result in an unexpected error. So let skip those program sequence for the suspend abort case. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: set odm_combine_policy based on context in dcn32 resourceWenjing Liu3-17/+34
[why] When populating dml pipes, odm combine policy should be assigned based on the pipe topology of the context passed in. DML pipes could be repopulated multiple times during single validate bandwidth attempt. We need to make sure that whenever we repopulate the dml pipes it is always aligned with the updated context. There is a case where DML pipes get repopulated during FPO optimization after ODM combine policy is changed. Since in the current code we reinitlaize ODM combine policy, even though the current context has ODM combine enabled, we overwrite it despite the pipes are already split. This causes DML to think that MPC combine is used so we mistakenly enable MPC combine because we apply pipe split with ODM combine policy reset. This issue doesn't impact non windowed MPO with ODM case because the legacy policy has restricted use cases. We don't encounter the case where both ODM and FPO optimizations are enabled together. So we decide to leave it as is because it is about to be replaced anyway. Cc: [email protected] # 6.6+ Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Don't perform rate toggle on DP2-capable FIXED_VS retimersMichael Strauss1-10/+12
[WHY] Only required if FIXED_VS retimer does not support DP2-capable. [HOW] Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdkfd: Add cache line sizes to KFD topologyJoseph Greathouse3-2/+95
The KFD topology includes cache line size, but we have not been filling that information out unless we are parsing a CRAT table. Fill in this information for the devices where we have cache information structs, and pipe this information to the topology sysfs files. v2: squash in fix from Joe (Alex) Signed-off-by: Joseph Greathouse <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Remove Legacy FIXED_VS Transparent LT SequenceMichael Strauss5-362/+1
The New sequence has been in use in DCN314 with no regressions introduced. Therefore, it is safe to enable this sequence for all devices using FIXED_VS retimers. So, remove the legacy codepath and its associated config flag. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: add panel_power_savings sysfs entry to eDP connectorsHamza Mahfooz1-0/+78
We want programs besides the compositor to be able to enable or disable panel power saving features. However, since they are currently only configurable through DRM properties, that isn't possible. So, to remedy that issue introduce a new "panel_power_savings" sysfs attribute. v2: squash in fix from Hamza (Alex) Cc: Mario Limonciello <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Clear the hotplug interrupt ack bit before hpd initializationQiang Ma4-8/+40
Problem: The computer in the bios initialization process, unplug the HDMI display, wait until the system up, plug in the HDMI display, did not enter the hotplug interrupt function, the display is not bright. Fix: After the above problem occurs, and the hpd ack interrupt bit is 1, the interrupt should be cleared during hpd_init initialization so that when the driver is ready, it can respond to the hpd interrupt normally. Signed-off-by: Qiang Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: fix typo in parameter descriptionAlex Deucher1-1/+1
Missing space. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amdgpu: Only create mes event log debugfs when mes is enabledshaoyunl1-3/+3
Skip the debugfs file creation for mes event log if the GPU doesn't use MES. This to prevent potential kernel oops when user try to read the event log in debugfs on a GPU without MES Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'Srinivasan Shanmugam1-10/+14
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.