aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2018-07-05drm/amdgpu: Remove amdgpu_gem_map_attach target_dev documentationMichel Dänzer1-1/+0
The parameter was removed. Fixes: a19741e5e5a9 "dma_buf: remove device parameter from attach callback v2" Reviewed-by: Junwei Zhang <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Add AMDGPU_GPU_PAGES_IN_CPU_PAGE defineMichel Dänzer3-8/+10
To hopefully make the code dealing with GPU vs CPU pages a little clearer. Suggested-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Use gmc_vram_full_visible in vram_mgr_bo_invisible_sizeMichel Dänzer1-1/+1
Signed-off-by: Michel Dänzer <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Dynamically probe for ATIF handle (v2)Lyude Paul1-21/+58
The other day I was testing one of the HP laptops at my office with an i915/amdgpu hybrid setup and noticed that hotplugging was non-functional on almost all of the display outputs. I eventually discovered that all of the external outputs were connected to the amdgpu device instead of i915, and that the hotplugs weren't being detected so long as the GPU was in runtime suspend. After some talking with folks at AMD, I learned that amdgpu is actually supposed to support hotplug detection in runtime suspend so long as the OEM has implemented it properly in the firmware. On this HP ZBook 15 G4 (the machine in question), amdgpu wasn't managing to find the ATIF handle at all despite the fact that I could see acpi events being sent in response to any hotplugging. After going through dumps of the firmware, I discovered that this machine did in fact support ATIF, but that it's ATIF method lived in an entirely different namespace than this device's handle (the device handle was \_SB_.PCI0.PEG0.PEGP, but ATIF lives in ATPX's handle at \_SB_.PCI0.GFX0). So, fix this by probing ATPX's ACPI parent's namespace if we can't find ATIF elsewhere, along with storing a pointer to the proper handle to use for ATIF and using that instead of the device's handle. This fixes HPD detection while in runtime suspend for this ZBook! v2: Update the comment to reflect how the namespaces are arranged based on the system configuration. (Alex) Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Add amdgpu_atpx_get_dhandle()Lyude Paul2-0/+12
Since it seems that some vendors are storing the ATIF ACPI methods under the same handle that ATPX lives under instead of the device's own handle, we're going to need to be able to retrieve this handle later so we can probe for ATIF there. Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: s/disp_detetion_ports/disp_detection_ports/Lyude Paul1-2/+2
Fix typo. Reviewed-by: Jim Qu <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Make struct amdgpu_atif private to amdgpu_acpi.cLyude Paul2-41/+53
Currently, there is nothing in amdgpu that actually uses these structs other than amdgpu_acpi.c. Additionally, since we're about to start saving the correct ACPI handle to use for calling ATIF in this struct this saves us from having to handle making sure that the acpi_handle (and by proxy, the type definition for acpi_handle and all of the other acpi headers) doesn't need to be included within the amdgpu_drv struct itself. This follows the example set by amdgpu_atpx_handler.c. Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: cosmetic fixEvan Quan2-16/+12
Fix coding style and drop unused variable. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: correct vega12 thermal support as trueEvan Quan1-0/+1
Thermal support is enabled on vega12. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: set vega12 pre display configurationsEvan Quan1-0/+41
Set num_displays to 0 and force uclk high as part of the mode set sequence. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: apply clocks adjust rules on power state changeEvan Quan2-0/+164
This add the apply_clocks_adjust_rules callback which is used to validate the clock settings on a power state change. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: correct vega12 max num of dpm levelEvan Quan1-8/+9
Use MAX_NUM_CLOCKS instead of VG12_PSUEDO* macros for the max number of dpm levels. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: drop unnecessary uclk hard min settingEvan Quan1-10/+0
We don't need to set uclk hard min here because this will be set with other clocks on power state change. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: correct smc display config for multi monitorEvan Quan1-1/+2
Need to take into account multi-head with synced displays. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: initialize uvd/vce powergate status v4Evan Quan1-0/+23
On UVD/VCE dpm enabled/disabled, the powergate status will be set as false/true. So that we will not try to ungate/gate them( enable/disable their dpm) again. v2: added check for uvd/vce powergate status before gating v3: fix typo in description v4: warning fix (Alex) Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: revise clock level setupEvan Quan1-107/+211
Make sure the clock level set only on dpm enabled. Also uvd/vce/soc clock also changed correspondingly. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: retrieve all clock ranges on startupEvan Quan2-16/+61
So that we do not need to use PPSMC_MSG_GetMin/MaxDpmFreq to get the clock ranges on runtime. Since that causes some problems. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: revise default dpm tables setupEvan Quan1-202/+132
Initialize the soft/hard min/max level correctly and handle the dpm disabled situation. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: drop the acg fixEvan Quan1-6/+0
This workaround is not needed any more. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: smc_dpm_info structure changeEvan Quan5-2/+14
A new member Vr2_I2C_address is added. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/powerplay: correct vega12 bootup values settingsEvan Quan4-12/+91
The vbios firmware structure changed between v3_1 and v3_2. So, the code to setup bootup values needs different paths based on header version. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Fix a typo in wm_min_memg_clk_in_khzRex Zhu3-11/+11
change wm_min_memg_clk_in_khz -> wm_min_mem_clk_in_khz Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Ctrl stutter mode through module parameterrex zhu1-1/+1
use ppfeaturemask to enable/disable stutter mode. Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Add stutter mode ctrl in module parameterrex zhu2-1/+3
Enable stutter mode can save power in low DRAM use cases including but not limited to productivity application use, web browsing, and video playback. Currently this feature is disabled by default. Make bit 17 in module parameter amdgpu_pp_feature_mask as stutter mode mask, so user can enable/disable this feature easily. Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Move CG/PG setting out of delay worker threadRex Zhu1-6/+8
Partially revert commit 2dc80b00652f ("drm/amdgpu: optimize amdgpu driver load & resume time")' 1. CG/PG enablement are part of gpu hw ip initialize, we should wait for them complete. otherwise, there are some potential conflicts, for example, Suspend and CG enablement concurrently. 2. better run ib test after hw initialize completely. That is to say, ib test should be after CG/PG enablement. otherwise, the test will not cover the cg/pg/poweroff enable case. Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Split set_pg_state into separate functionRex Zhu2-9/+28
1. add amdgpu_device_ip_late_set_pg_state function for set pg state. 2. delete duplicate pg state setting on gfx_v8_0's late_init. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Add gfx_off support in smu through pp_set_powergating_by_smuRex Zhu3-28/+11
we can take gfx off feature as gfx power gate. gfx off feature is also controled by smu. so add gfx_off support in pp_set_powergating_by_smu. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/pp: Add powergate_gfx backend function on RavenRex Zhu1-0/+1
Raven support gfx off feature instand of gfx powergate, so use smu10_gfx_off_control as the powergate_gfx backend function. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/pp: Add gfx pg support in smu through set_powergating_by_smuRex Zhu2-14/+21
gfx ip block can call set_powergating_by_smu to set gfx pg state if necessary. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/pp: Unify powergate_uvd/vce/mmhub to set_powergating_by_smuRex Zhu7-24/+66
Some HW ip blocks need call SMU to enter/leave power gate state. So export common set_powergating_by_smu interface. 1. keep consistent with set_clockgating_by_smu 2. scales easily to powergate other ip(gfx) if necessary Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/pp: Rename enable_per_cu_power_gating to powergate_gfxRex Zhu5-7/+7
keep consistent with powergate_uvd/vce/mmhub Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Rename set_mmhub_powergating_by_smu to powergate_mmhubRex Zhu6-12/+12
In order to keep consistent with powergate_uvd/vce. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Fix dm-pp clks type convert errorrex zhu1-0/+3
fix a typo when convert displayphyclk type. Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Drop unnecessary header filerex zhu1-1/+0
powerplay implement hwmgr_function table for all supported asics in order to conceal the asic's detail infomation. so no need to include the smu10_hwmgr.h. Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: remove duplicated codesFlora Cui1-5/+0
the fence_context and seqno is init in amdgpu_vm_manager_init() & amdgpu_vmid_mgr_init(). remove the amdgpu_vmid_mgr_init() copy. Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Chunming Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: don't initialize resultStefan Agner1-1/+1
The wrong enum type is used to initialize the result, leading to a warning when using clang: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1998:26: warning: implicit conversion from enumeration type 'enum ddc_result' to different enumeration type 'enum dc_status' [-Wenum-conversion] enum dc_status result = DDC_RESULT_UNKNOWN; ~~~~~~ ^~~~~~~~~~~~~~~~~~ 1 warning generated. Initialization of result is unnecessary anyway, just drop the initialization. Signed-off-by: Stefan Agner <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amdgpu: Rename entity cleanup finctions.Andrey Grodzovsky3-5/+5
Everything in the flush code path (i.e. waiting for SW queue to become empty) names with *_flush() and everything in the release code path names *_fini() Signed-off-by: Andrey Grodzovsky <[email protected]> Suggested-by: Christian König <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/scheduler: Rename cleanup functions v2.Andrey Grodzovsky7-11/+11
Everything in the flush code path (i.e. waiting for SW queue to become empty) names with *_flush() and everything in the release code path names *_fini() This patch also effect the amdgpu and etnaviv drivers which use those functions. v2: Also pplay the change to vd3. Signed-off-by: Andrey Grodzovsky <[email protected]> Suggested-by: Christian König <[email protected]> Acked-by: Lucas Stach <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Allow option to use worst-case watermarkTony Cheng2-1/+23
use worse case watermark (consider both DCC and VM) to keep golden consistent regardless of DCC Signed-off-by: Tony Cheng <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: get board layout for edid emulationSamson Tam5-1/+474
Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: add valid regoffset and NULL pointer checkCharlene Liu5-17/+38
Signed-off-by: Charlene Liu <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: dal 3.1.52Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Check scaling ration not viewports params.Yongqiang Sun1-3/+3
In case of roation, width and height in viewport is difference between viewport and h_active and v_active, while this is not scaling. The right way is check ratios in scaling data, to determine it is a scaling case or not. Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: remove soc_bounding_box.cDmytro Laktyushkin5-119/+2
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: move dcn watermark programming to set_bandwidthDmytro Laktyushkin2-90/+19
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: separate out wm change request dcn workaroundDmytro Laktyushkin5-5/+13
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: remove dcn1 watermark sets b, c and dDmytro Laktyushkin1-1/+20
Currently dcn1 will not switch between watermark sets so we can save time by not calculating 3 extra sets. Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: fix dcn1 watermark range reportingDmytro Laktyushkin1-84/+18
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: Moving powerplay functions to a separate classMikita Lipski3-493/+526
Moving powerplay functions to a new amdgpu_dm_pp_smu class and cleaning dm_services class from unused headers. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-05drm/amd/display: move dml defaults to respective dcn resource filesDmytro Laktyushkin2-61/+64
Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.