aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-06-19drm/amdgpu: init TA fw for psp v14Likun Gao1-0/+5
Add support to init TA firmware for psp v14. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amdgpu: cleanup MES11 command submissionChristian König1-28/+48
The approach of having a separate WB slot for each submission doesn't really work well and for example breaks GPU reset. Use a status query packet for the fence update instead since those should always succeed we can use the fence of the original packet to signal the state of the operation. While at it cleanup the coding style. Fixes: eef016ba8986 ("drm/amdgpu/mes11: Use a separate fence per transaction") Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amdgpu: fix UBSAN warning in kv_dpm.cAlex Deucher1-0/+2
Adds bounds check for sumo_vid_mapping_entry. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3392 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-06-19drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clangNathan Chancellor1-1/+1
Commit 77acc6b55ae4 ("riscv: add support for kernel-mode FPU") and commit a28e4b672f04 ("drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT") enabled support for CONFIG_DRM_AMD_DC_FP with RISC-V. Unfortunately, this exposed -Wframe-larger-than warnings (which become fatal with CONFIG_WERROR=y) when building ARCH=riscv allmodconfig with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:58:13: error: stack frame size (2448) exceeds limit (2048) in 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation' [-Werror,-Wframe-larger-than] 58 | static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation( | ^ 1 error generated. Many functions in this file use a large number of parameters, which must be passed on the stack at a certain pointer due to register exhaustion, which can cause high stack usage when inlining and issues with stack slot analysis get involved. While the compiler can and should do better (as GCC uses less than half the amount of stack space for the same function), it is not as simple as a fix as adjusting the functions not to take a large number of parameters. Unfortunately, modifying these files to avoid the problem is a difficult to justify approach because any revisions to the files in the kernel tree never make it back to the original source (so copies of the code for newer hardware revisions just reintroduce the issue) and the files are hard to read/modify due to being "gcc-parsable HW gospel, coming straight from HW engineers". Avoid building the problematic code for RISC-V by modifying the existing condition for arm64 that exists for the same reason. Factor out the logical not to make the condition a little more readable naturally. Fixes: a28e4b672f04 ("drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT") Reported-by: Palmer Dabbelt <palmer@rivosinc.com> Closes: https://lore.kernel.org/20240530145741.7506-2-palmer@rivosinc.com/ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIAMichael Strauss3-1/+75
[WHY] Empty SST TUs are illegal to transmit over a USB4 DP tunnel. Current policy is to configure stream encoder to pack 2 pixels per pclk even when ODM combine is not in use, allowing seamless dynamic ODM reconfiguration. However, in extreme edge cases where average pixel count per TU is less than 2, this can lead to unexpected empty TU generation during compliance testing. For example, VIC 1 with a 1xHBR3 link configuration will average 1.98 pix/TU. [HOW] Calculate average pixel count per TU, and block 2 pixels per clock if endpoint is a DPIA tunnel and pixel clock is low enough that we will never require 2:1 ODM combine. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: change dram_clock_latency to 34us for dcn35Paul Hsieh1-1/+1
[Why & How] Current DRAM setting would cause underflow on customer platform. Modify dram_clock_change_latency_us from 11.72 to 34.0 us as per recommendation from HW team Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: Change dram_clock_latency to 34us for dcn351Daniel Miess1-1/+1
[Why] Intermittent underflow observed when using 4k144 display on dcn351 [How] Update dram_clock_change_latency_us from 11.72us to 34us Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2Christian König3-51/+0
This reverts commit b8c415e3bf98 ("drm/amdgpu: take runtime pm reference when we attach a buffer") and commit 425285d39afd ("drm/amdgpu: add amdgpu runpm usage trace for separate funcs"). Taking a runtime pm reference for DMA-buf is actually completely unnecessary and even dangerous. The problem is that calling pm_runtime_get_sync() from the DMA-buf callbacks is illegal because we have the reservation locked here which is also taken during resume. So this would deadlock. When the buffer is in GTT it is still accessible even when the GPU is powered down and when it is in VRAM the buffer gets migrated to GTT before powering down. The only use case which would make it mandatory to keep the runtime pm reference would be if we pin the buffer into VRAM, and that's not something we currently do. v2: improve the commit message Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-06-19drm/amdgpu: Indicate CU havest info to CPHarish Kasiviswanathan1-2/+13
To achieve full occupancy CP hardware needs to know if CUs in SE are symmetrically or asymmetrically harvested v2: Reset is_symmetric_cus for each loop Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: prevent register access while in IPSHamza Mahfooz1-0/+10
We can't read/write to DCN registers while in IPS. Since, that can cause the system to hang. So, before proceeding with the access in that scenario, force the system out of IPS. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amdgpu: fix locking scope when flushing tlbYunxiang Li1-32/+34
Which method is used to flush tlb does not depend on whether a reset is in progress or not. We should skip flush altogether if the GPU will get reset. So put both path under reset_domain read lock. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-06-19drm/amd/display: Remove redundant idle optimization checkRoman Li1-3/+0
[Why] Disable idle optimization for each atomic commit is unnecessary, and can lead to a potential race condition. [How] Remove idle optimization check from amdgpu_dm_atomic_commit_tail() Fixes: 196107eb1e15 ("drm/amd/display: Add IPS checks before dcn register access") Cc: stable@vger.kernel.org Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard14-86/+96
Roll -rc3 and current drm/fixes in. This will also unstuck our for-next branch. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-10drm/amdgpu: Fix the BO release clear memory warningArunpravin Paneer Selvam2-2/+1
This happens when the amdgpu_bo_release_notify running before amdgpu_ttm_set_buffer_funcs_status set the buffer funcs to enabled. check the buffer funcs enablement before calling the fill buffer memory. v2:(Christian) - Apply it only for GEM buffers and since GEM buffers are only allocated/freed while the driver is loaded we never run into the issue to clear with buffer funcs disabled. v3:(Mario) - drop the stable tag as this will presumably go into a -fixes PR for 6.10 Log snip: *ERROR* Trying to clear memory with ring turned off. RIP: 0010:amdgpu_bo_release_notify+0x201/0x220 [amdgpu] Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Richard Gong <richard.gong@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610180401.9540-1-Arunpravin.PaneerSelvam@amd.com
2024-06-05drm/amdgpu/pptable: Fix UBSAN array-index-out-of-boundsTasos Sahanidis1-42/+49
Flexible arrays used [1] instead of []. Replace the former with the latter to resolve multiple UBSAN warnings observed on boot with a BONAIRE card. In addition, use the __counted_by attribute where possible to hint the length of the arrays to the compiler and any sanitizers. Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platformsMario Limonciello1-9/+11
commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") but caused issues for some people. Adjust the workaround flow to properly only apply in the S4 case: -> For shutdown go through SMU_MSG_PrepareMp1ForUnload -> For S4 go through SMU_MSG_GfxDeviceDriverReset and SMU_MSG_PrepareMp1ForUnload Reported-and-tested-by: lectrode <electrodexsnet@gmail.com> Closes: https://github.com/void-linux/void-packages/issues/50417 Cc: stable@vger.kernel.org Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-31Merge tag 'amd-drm-fixes-6.10-2024-05-30' of ↵Dave Airlie12-35/+36
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-05-30: amdgpu: - RAS fix - Fix colorspace property for MST connectors - Fix for PCIe DPM - Silence UBSAN warning - GPUVM robustness fix - Partition fix - Drop deprecated I2C_CLASS_SPD amdkfd: - Revert unused changes for certain 11.0.3 devices - Simplify APU VRAM handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240530202316.2246826-1-alexander.deucher@amd.com
2024-05-29drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2Heiner Kallweit1-1/+0
Support for I2C_CLASS_SPD is currently being removed from the kernel. Only remaining step is to remove the definition of I2C_CLASS_SPD. Setting I2C_CLASS_SPD in a driver is a no-op meanwhile, so remove it here. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amdgpu: Make CPX mode auto default in NPS4Rajneesh Bhardwaj1-1/+1
On GFXIP9.4.3, make CPX mode as the default compute mode if the node is setup in NPS4 memory partition mode. This change is only applicable for dGPU, for APU, continue to use TPX mode. Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amdkfd: simplify APU VRAM handlingAlex Deucher4-14/+11
With commit 89773b85599a ("drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs") big and small APU "VRAM" handling in KFD was unified. Since AMD_IS_APU is set for both big and small APUs, we can simplify the checks in the code. v2: clean up a few more places (Lang) Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"Alex Deucher1-9/+2
This reverts commit 28ebbb4981cb1fad12e0b1227dbecc88810b1ee8. Revert this commit as apparently the LLVM code to take advantage of this never landed. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Feifei Xu <feifei.xu@amd.com>
2024-05-29drm/amdgpu: fix dereference null return value for the function ↵Jesse Zhang1-1/+5
amdgpu_vm_pt_parent The pointer parent may be NULLed by the function amdgpu_vm_pt_parent. To make the code more robust, check the pointer parent. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amdgpu: silence UBSAN warningAlex Deucher1-1/+1
Convert a variable sized array from [1] to []. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()Alex Deucher1-7/+12
Use current speed/width on devices which don't support dynamic PCIe switching. Fixes: 466a7d115326 ("drm/amd: Use the first non-dGPU PCI device for BW limits") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3289 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-24Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds8-15/+84
Pull drm fixes from Dave Airlie: "Some fixes for the end of the merge window, mostly amdgpu and panthor, with one nouveau uAPI change that fixes a bad decision we made a few months back. nouveau: - fix bo metadata uAPI for vm bind panthor: - Fixes for panthor's heap logical block. - Reset on unrecoverable fault - Fix VM references. - Reset fix. xlnx: - xlnx compile and doc fixes. amdgpu: - Handle vbios table integrated info v2.3 amdkfd: - Handle duplicate BOs in reserve_bo_and_cond_vms - Handle memory limitations on small APUs dp/mst: - MST null deref fix. bridge: - Don't let next bridge create connector in adv7511 to make probe work" * tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel: drm/amdgpu/atomfirmware: add intergrated info v2.3 table drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2 drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms drm/bridge: adv7511: Attach next bridge without creating connector drm/buddy: Fix the warn on's during force merge drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations drm/panthor: Call panthor_sched_post_reset() even if the reset failed drm/panthor: Reset the FW VM to NULL on unplug drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level drm/panthor: Force an immediate reset on unrecoverable faults drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints drm/panthor: Fix an off-by-one in the heap context retrieval logic drm/panthor: Relax the constraints on the tiler chunk size drm/panthor: Make sure the tiler initial/max chunks are consistent drm/panthor: Fix tiler OOM handling to allow incremental rendering drm: xlnx: zynqmp_dpsub: Fix compilation error drm: xlnx: zynqmp_dpsub: Fix few function comments
2024-05-23drm/amd/display: Enable colorspace property for MST connectorsMario Limonciello1-0/+3
MST colorspace property support was disabled due to a series of warnings that came up when the device was plugged in since the properties weren't made at device creation. Create the properties in advance instead. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 69a959610229 ("drm/amd/display: Temporary Disable MST DP Colorspace Property"). Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-23drm/amdgpu: correct hbm field in boot statusHawking Zhang1-1/+1
hbm filed takes bit 13 and bit 14 in boot status. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-23Merge tag 'trace-assign-str-v6.10' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing cleanup from Steven Rostedt: "Remove second argument of __assign_str() The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so that it no longer needs the second argument. The __assign_str() is always matched with __string() field that takes a field name and the source for that field: __string(field, source) The TRACE_EVENT() macro logic will save off the source value and then use that value to copy into the ring buffer via the __assign_str(). Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and __string() to not duplicate getting the string"), the __assign_str() needed the second argument which would perform the same logic as the __string() source parameter did. Not only would this add overhead, but it was error prone as if the __assign_str() source produced something different, it may not have allocated enough for the string in the ring buffer (as the __string() source was used to determine how much to allocate) Now that the __assign_str() just uses the same string that was used in __string() it no longer needs the source parameter. It can now be removed" * tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/treewide: Remove second parameter of __assign_str()
2024-05-23Merge tag 'drm-misc-next-fixes-2024-05-23' of ↵Dave Airlie1-1/+1
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - MST null deref fix. - Don't let next bridge create connector in adv7511 to make probe work. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f171b14a-ed6b-4124-893b-802a336dbe2b@linux.intel.com
2024-05-22Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of ↵Linus Torvalds4-102/+7
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more non-mm updates from Andrew Morton: - A series ("kbuild: enable more warnings by default") from Arnd Bergmann which enables a number of additional build-time warnings. We fixed all the fallout which we could find, there may still be a few stragglers. - Samuel Holland has developed the series "Unified cross-architecture kernel-mode FPU API". This does a lot of consolidation of per-architecture kernel-mode FPU usage and enables the use of newer AMD GPUs on RISC-V. - Tao Su has fixed some selftests build warnings in the series "Selftests: Fix compilation warnings due to missing _GNU_SOURCE definition". - This pull also includes a nilfs2 fixup from Ryusuke Konishi. * tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) nilfs2: make block erasure safe in nilfs_finish_roll_forward() selftests/harness: use 1024 in place of LINE_MAX Revert "selftests/harness: remove use of LINE_MAX" selftests/fpu: allow building on other architectures selftests/fpu: move FP code to a separate translation unit drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT drm/amd/display: only use hard-float, not altivec on powerpc riscv: add support for kernel-mode FPU x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT arch: add ARCH_HAS_KERNEL_FPU_SUPPORT x86/fpu: fix asm/fpu/types.h include guard kbuild: enable -Wcast-function-type-strict unconditionally kbuild: enable -Wformat-truncation on clang ...
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)2-9/+9
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-22drm/amdgpu/atomfirmware: add intergrated info v2.3 tableLi Ma2-0/+58
[Why] The vram width value is 0. Because the integratedsysteminfo table in VBIOS has updated to 2.3. [How] Driver needs a new intergrated info v2.3 table too. Then the vram width value will be correct. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-05-21drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2Wayne Lin1-1/+1
[Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/ Cc: lyude@redhat.com Cc: imre.deak@intel.com Cc: stable@vger.kernel.org Cc: regressions@lists.linux.dev Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-20drm/amdkfd: Let VRAM allocations go to GTT domain on small APUsLang Yu5-13/+23
Small APUs(i.e., consumer, embedded products) usually have a small carveout device memory which can't satisfy most compute workloads memory allocation requirements. We can't even run a Basic MNIST Example with a default 512MB carveout. https://github.com/pytorch/examples/tree/main/mnist. Error Log: "torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate 84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes is free. Of the allocated memory 103.83 MiB is allocated by PyTorch, and 22.17 MiB is reserved by PyTorch but unallocated" Though we can change BIOS settings to enlarge carveout size, which is inflexible and may bring complaint. On the other hand, the memory resource can't be effectively used between host and device. The solution is MI300A approach, i.e., let VRAM allocations go to GTT. Then device and host can flexibly and effectively share memory resource. v2: Report local_mem_size_private as 0. (Felix) Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vmsLang Yu1-1/+2
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used. Two attachments use the same VM, root PD would be locked twice. [ 57.910418] Call Trace: [ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu] [ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu] [ 57.793923] ? idr_get_next_ul+0xbe/0x100 [ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu] [ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu] [ 57.794141] ? process_scheduled_works+0x29c/0x580 [ 57.794147] process_scheduled_works+0x303/0x580 [ 57.794157] ? __pfx_worker_thread+0x10/0x10 [ 57.794160] worker_thread+0x1a2/0x370 [ 57.794165] ? __pfx_worker_thread+0x10/0x10 [ 57.794167] kthread+0x11b/0x150 [ 57.794172] ? __pfx_kthread+0x10/0x10 [ 57.794177] ret_from_fork+0x3d/0x60 [ 57.794181] ? __pfx_kthread+0x10/0x10 [ 57.794184] ret_from_fork_asm+0x1b/0x30 Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-19drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORTSamuel Holland4-94/+7
Now that all previously-supported architectures select ARCH_HAS_KERNEL_FPU_SUPPORT, this code can depend on that symbol instead of the existing list of architectures. It can also take advantage of the common kernel-mode FPU API and method of adjusting CFLAGS. Link: https://lkml.kernel.org/r/20240329072441.591471-14-samuel.holland@sifive.com Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <git@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-19drm/amd/display: only use hard-float, not altivec on powerpcMichael Ellerman3-12/+4
The compiler flags enable altivec, but that is not required; hard-float is sufficient for the code to build and function. Drop altivec from the compiler flags and adjust the enable/disable code to only enable FPU use. Link: https://lkml.kernel.org/r/20240329072441.591471-13-samuel.holland@sifive.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <git@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-15Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds497-3052/+13941
Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
2024-05-10drm/amdgpu: Fix comparison in amdgpu_res_cpu_visibleMichel Dänzer1-1/+1
It incorrectly claimed a resource isn't CPU visible if it's located at the very end of CPU visible VRAM. Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343 Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-05-10drm/amdkfd: don't allow mapping the MMIO HDP page with large pagesAlex Deucher1-2/+5
We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space") Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada1-1/+1
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-08Revert "drm/amdkfd: Add partition id field to location_id"Lijo Lazar1-3/+2
This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f. RCCL library is currently not treating spatial partitions differently, hence this change is causing issues. Revert temporarily till RCCL implementation is ready for spatial partitions. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 usersMario Limonciello1-1/+1
Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path. Cc: Tim Huang <Tim.Huang@amd.com> Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: MST DSC check for older devicesAgustin Gutierrez1-6/+8
[Why] Some older MST hubs do not report DPCD registers according to specification. [How] This change re-applies commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). With an additional check for these older MST devices. Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Fix idle optimization checks for multi-display and dual eDPNicholas Kazlauskas1-6/+27
[Why] Idle optimizations are blocked if there's more than one eDP connector on the board - blocking S0i3 and IPS2 for static screen. [How] Fix the checks to correctly detect number of active eDP. Also restrict the eDP support to panels that have correct feature support. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Fix DSC-re-computingAgustin Gutierrez1-5/+13
[Why] This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). The change caused light-up issues with a second display that required DSC on some MST docks. [How] Use Virtual DPCD for DSC caps in MST case. [Limitations] This change only affects MST DSC devices that follow specifications additional changes are required to check for old MST DSC devices such as ones which do not check for Virtual DPCD registers. Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Enable urgent latency adjustments for DCN35Nicholas Susanto1-2/+2
[Why] Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL setup. It is caused by latency varying based on the DCFCLK/FCLK state. [How] Enable urgent latency adjustment and match the reference to existing ASIC that also see increased latency at low FCLK. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"Geert Uytterhoeven1-4/+2
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.