aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/pm
AgeCommit message (Collapse)AuthorFilesLines
2021-08-16drm/amd/pm: change the workload type for some cardsKenneth Feng1-1/+14
change the workload type for some cards as it is needed. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-16Revert "drm/amd/pm: fix workload mismatch on vega10"Kenneth Feng1-1/+1
This reverts commit 0979d43259e13846d86ba17e451e17fec185d240. Revert this because it does not apply to all the cards. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-10drm/amd/pm: bug fix for the runtime pm BACOKenneth Feng1-2/+1
In some systems only MACO is supported. This is to fix the problem that runtime pm is enabled but BACO is not supported. MACO will be handled seperately. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Jack Gui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-08-06drm/amd/pm: Fix a memory leak in an error handling path in ↵Christophe JAILLET1-1/+1
'vangogh_tables_init()' 'watermarks_table' must be freed instead 'clocks_table', because 'clocks_table' is known to be NULL at this point and 'watermarks_table' is never freed if the last kzalloc fails. Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-06drm/amd/pm: update smu v13.0.1 firmware headerXiaomeng Hou1-1/+3
Update smu v13.0.1 firmware header for yellow carp. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Aaron Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-05drm/amd/pm: update yellow carp pmfw interface versionXiaomeng Hou1-1/+1
Correct yellow carp driver-PMFW interface version to v4. Signed-off-by: Xiaomeng Hou <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar3-12/+40
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-16drm/amd/pm: update DRIVER_IF_VERSION for beige_gobyTao Zhou1-1/+1
Update the version to 0xD for beige_goby. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Jack Gui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-13drm/amd/pm: Add waiting for response of mode-reset message for yellow carpAaron Liu1-7/+3
Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send mode-reset message to SMC. Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-13drm/amd/pm: Fix BACO state setting for Beige_GobyChengming Gui1-0/+1
Correct BACO state setting for Beige_Goby Signed-off-by: Chengming Gui <[email protected]> Reviewed-by: Jiansong Chen <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-13drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carpXiaomeng Hou6-377/+57
Since there's nothing special in smu implementation for yellow carp, it's better to reuse the common smu_v13_0 interfaces and drop the specific smu_v13_0_1.c|h files. v2: remove the duplicate register offset and shift mask header files as well. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-01drm/amd/pm: skip PrepareMp1ForUnload message in s0ixShyam Sundar S K1-1/+2
The documentation around PrepareMp1ForUnload message says that anything sent to SMU after this command would be stalled as the PMFW would not be in a state to take further job requests. Technically this is right in case of S3 scenario. But, this might not be the case during s0ix as the PMC driver would be the last to send the SMU on the OS_HINT. If SMU gets a PrepareMp1ForUnload message before the OS_HINT, this would stall the entire S0ix process. Results show that, this message to SMU is not required during S0ix and hence skip it. Reviewed-by: Prike Liang <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Acked-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-30amdgpu/pm: remove code duplication in show_power_cap callsDarren Powell1-74/+21
v3: updated patch to apply to latest code v2: reorder to check pointers before calling pm_runtime_* functions created generic function and call with enum from * amdgpu_hwmon_show_power_cap_max * amdgpu_hwmon_show_power_cap * amdgpu_hwmon_show_power_cap_default === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 10` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} cp pp_show_power_cap.txt{,.old} lspci -nn | grep "VGA\|Display" > pp_show_power_cap.test.log FILES=" power1_cap power1_cap_max power1_cap_default " for f in $FILES do echo $f = `cat $HWMON_DIR/$f` >> pp_show_power_cap.test.log done Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-29drm/amdgpu: Power down VCN and JPEG before disabling SMU featuresChengzhe Liu1-2/+6
When unloading driver, if VCN is powered on, sending message DisableAllSmuFeatures to SMU will cause SMU hang. We need to power down VCN and JPEG before clean up SMU. Signed-off-by: Chengzhe Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/pm: Disable SMU messages in navi10 sriovYifan Zha1-4/+4
[Why] sriov vf send unsupported SMU message lead to fail. [How] disable related messages in sriov. Signed-off-by: Yifan Zha <[email protected]> Acked-by: Jingwen Chen <[email protected]> Reviewed-by: Jack Zhang <[email protected]> Reviewed-by: Monk Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amdgpu: message smu to update hbm bad page numberStanley.Yang2-0/+21
Use SMU to update the bad pages rather than directly accessing the EEPROM from the driver. Signed-off-by: Stanley.Yang <[email protected]> Reviewed-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18amdgpu/pm: replaced snprintf usage in amdgpu_pm.c with sysfs_emitDarren Powell1-13/+14
replaced snprintf usage in amdgpu_pm.c with sysfs_emit fixed warning on comparing int with uint32_t in amdgpu_get_pp_num_states() == Test == AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 10` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} lspci -nn | grep "VGA\|Display" > scnprintf.test.log FILES="pp_num_states pp_od_clk_voltage pp_features pp_dpm_sclk pp_dpm_mclk pp_dpm_socclk pp_dpm_fclk pp_dpm_vclk pp_dpm_dclk pp_dpm_dcefclk pp_power_profile_mode " for f in $FILES do echo === $f === >> scnprintf.test.log cat $HWMON_DIR/device/$f >> scnprintf.test.log done Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: support ss metrics read on yellow_carpSathishkumar S1-0/+34
add support to read smart shift apu and dgpu power share on yellow_carp Signed-off-by: Sathishkumar S <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: support ss metrics read on renoirSathishkumar S1-0/+34
add support to read smart shift apu and dgpu power share on renoir. Signed-off-by: Sathishkumar S <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: Only primary die supports power dataLijo Lazar1-11/+46
On aldebaran, only primary die fetches valid power data. Show power/energy values as 0 on secondary die. Also, power limit should not be set through secondary die. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the power limits reporting on OOB supportedEvan Quan8-35/+95
As OOB(out-of-band) interface may be used to update the power limits. Thus to make sure the power limits reporting of our driver always reflects the correct values, the internal cache must be aligned carefully. V2: add support for out-of-band of other ASICs align cached current power limit with OOB imposed Signed-off-by: Evan Quan <[email protected]> Reviewed-By: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the dpm features disablement for Navi1xEvan Quan1-1/+2
For BACO scenario, PMFW will handle the dpm features disablement and interaction with RLC properly. Driver involvement is unnecessary and error prone. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: update the cached dpm feature statusEvan Quan5-13/+50
For some ASICs, the real dpm feature disablement job is handled by PMFW during baco reset and custom pptable loading. Cached dpm feature status need to be updated to pair that. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: correct the runpm handling for BACO supported ASICEvan Quan4-13/+55
Via the fSMC_MSG_ArmD3 message, PMFW can properly act on the Dstate change. Driver involvement for determining the timing for BACO enter/exit is not needed. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/pm: drop the incomplete fix for Navi14 runpm issueEvan Quan1-25/+1
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to be incomplete. Another fix(see link below) has been sent out. Link: https://lore.kernel.org/linux-pci/[email protected]/ Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add aldebaran throttler translationGraham Sider1-5/+22
Perform dependent to independent throttle status translation for aldebaran. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add renoir throttler translationGraham Sider1-5/+24
Perform dependent to independent throttle status translation for renoir. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add vangogh throttler translationGraham Sider1-9/+29
Perform dependent to independent throttle status translation for vangogh. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add sienna cichlid throttler translationGraham Sider1-5/+29
Perform dependent to independent throttle status translation for sienna cichlid. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add navi1x throttler translationGraham Sider1-0/+34
Perform dependent to independent throttle status translation for navi1x. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add arcturus throttler translationGraham Sider1-5/+28
Perform dependent to independent throttle status translation for arcturus. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add common throttler translation funcGraham Sider2-0/+17
Defines smu_cmn_get_indep_throttler_status which performs ASIC independent translation given a corresponding lookup table. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add ASIC independent throttle bitsGraham Sider1-0/+42
Add new defines for thermal throttle status bits which are ASIC independent. This bit field will be visible to userspace via gpu_metrics alongside the previous ASIC dependent bit fields. Seperated into four types: power throttlers (16 bits), current throttlers (16 bits), temperature (24 bits), other (8 bits). Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/pm: Add u64 throttler status field to gpu_metricsGraham Sider1-0/+3
This patch set adds support for a new ASIC independant u64 throttler status field (indep_throttle_status). Piggybacks off the gpu_metrics_v1_3 bump and similarly bumps gpu_metrics_v2 version (to v2_2) to add field. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/pm: fix warning reported by kernel test robotXiaomeng Hou1-1/+1
Kernel test robot throws warning -> >> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:483:2: warning: variable 'member_type' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:487:47: note: uninitialized use occurs here return yellow_carp_get_smu_metrics_data(smu, member_type, value); ^~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:465:2: note: variable 'member_type' is declared here MetricsMember_t member_type; ^ 1 warning generated. Fix this warning by return errno when the clk type is unsupported. Reported-by: kernel test robot <[email protected]> Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: add kernel documentation for smu_get_power_limitDarren Powell1-0/+10
added doc tag "amdgpu_pp_power" with description added tags for enums pp_power_limit_level, pp_power_type added tag for function smu_get_power_limit Test: * Temporary insertion into Documentation/gpu/amdgpu.rst ------------START------------ Power Limit ----------- .. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h :doc: amdgpu_pp_power .. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h :identifiers: pp_power_limit_level .. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h :identifiers: pp_power_type .. kernel-doc:: drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c :identifiers: smu_get_power_limit -------------END------------- Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: handle return value for get_power_limitDarren Powell1-15/+24
Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: modify and add smu_get_power_limit to Powerplay APIDarren Powell3-17/+7
modify args of smu_get_power_limit to match Powerplay API .get_power_limit add smu_get_power_limit to Powerplay API swsmu_pm_funcs remove special handling of smu in amdgpu_hwmon_show_power_cap* * Test AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} lspci -nn | grep "VGA\|Display" ; \ echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ; \ echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ; \ echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: modify Powerplay API get_power_limit to use new pp_power enumsDarren Powell2-22/+38
updated {amd_pm_funcs}->get_power_limit() signature rewrote pp_get_power_limit to use new enums pp_get_power_limit now returns -EOPNOTSUPP for unknown power limit update calls to {amd_pm_funcs}->get_power_limit() * Test Notes * testing hardware was NAVI10 (tests SMU path) ** needs testing on VANGOGH ** needs testing on SMU < 11 ** ie, one of TOPAZ, FIJI, TONGA, POLARIS10, POLARIS11, POLARIS12, VEGAM, CARRIZO, STONEY, VEGA10, VEGA12,VEGA20, RAVEN, BONAIRE, HAWAII * Test AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} lspci -nn | grep "VGA\|Display" ; \ echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ; \ echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ; \ echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: clean up smu_get_power_limit function signatureDarren Powell3-12/+43
add two new powerplay enums (limit_level, type) add enums to smu_get_power_limit signature remove input bitfield stuffing of output variable limit update calls to smu_get_power_limit * Test AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} lspci -nn | grep "VGA\|Display" ; \ echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ; \ echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ; \ echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08amdgpu/pm: reorder definition of swsmu_pm_funcs for readabilityDarren Powell1-24/+24
Match the order of definition to the structure's declaration to help with locating included and missing functions of the API Signed-off-by: Darren Powell <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: disable manually setting MCLK power level on yellow carpXiaomeng Hou1-12/+10
PMFW provides specific messages for setting fclk freq range thus adjust the power level. There's misusing of these messages when setting dpm mclk. Since actually mclk could adjust automatically complying with fclk, remove standalone support for mclk dpm level setting. Acked-by: Huang Rui <[email protected]> Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amdgpu: add mode2 reset support for yellow carpAaron Liu1-0/+26
This patch adds mode2 reset support for yellow carp. Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add set_performance_level function for yellow carpXiaomeng Hou1-0/+84
This patch enables editing sysfs file power_dpm_force_performance_level for yellow carp. User could thus adjust the dpm forced level. v2: enable fine grain control of GFXCLK only when in manual performance level mode. In other mode, the min/max range of GFXCLK will be reset to corresponding values. Ex: To enable min 300MHz / max 600MHz gfx clocks 1) echo manual > /sys/bus/pci/devices/.../power_dpm_force_performance_level 2) echo s 0 300 > /sys/bus/pci/devices/.../pp_od_clk_voltage 3) echo s 1 600 > /sys/bus/pci/devices/.../pp_od_clk_voltage 4) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage Signed-off-by: Xiaomeng Hou <[email protected]> Acked-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add the interface to dump smu metrics table for yellow carpXiaomeng Hou1-1/+55
This patch is to add the interface to dump smu metrics table for yellow carp. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add callbacks to read/write sysfs file pp_power_profile_modeXiaomeng Hou1-0/+86
Implement the sysfs API for getting/setting pp_power_profile_mode for yellow carp. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add callback get_dpm_ultimate_freq for yellow carpXiaomeng Hou1-0/+111
Add callback function to get the hard frequency range of a clock domain for yellow carp. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add callback to get bootup values for yellow carpXiaomeng Hou3-0/+139
Add get_vbios_bootup_values function to get the bootup values for yellow carp. Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add PrepareMp1ForUnload support for yellow carpAaron Liu1-0/+4
Driver needs to notify the PMFW when the RLC is disabled. Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-04drm/amd/pm: add callback force_clk_levels for yellow carpXiaomeng Hou1-0/+114
Implement the sysfs API to set a range of allowed DPM levels for specific clock domain. v2: return error directly if the specified clock type not supported Acked-by: Huang Rui <[email protected]> Signed-off-by: Xiaomeng Hou <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.