aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2024-02-07drm/amd/display: correct static screen event maskAllen Pan4-4/+24
[Why] Hardware register definition changed Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Allen Pan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: set odm_combine_policy based on context in dcn32 resourceWenjing Liu3-17/+34
[why] When populating dml pipes, odm combine policy should be assigned based on the pipe topology of the context passed in. DML pipes could be repopulated multiple times during single validate bandwidth attempt. We need to make sure that whenever we repopulate the dml pipes it is always aligned with the updated context. There is a case where DML pipes get repopulated during FPO optimization after ODM combine policy is changed. Since in the current code we reinitlaize ODM combine policy, even though the current context has ODM combine enabled, we overwrite it despite the pipes are already split. This causes DML to think that MPC combine is used so we mistakenly enable MPC combine because we apply pipe split with ODM combine policy reset. This issue doesn't impact non windowed MPO with ODM case because the legacy policy has restricted use cases. We don't encounter the case where both ODM and FPO optimizations are enabled together. So we decide to leave it as is because it is about to be replaced anyway. Cc: [email protected] # 6.6+ Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Don't perform rate toggle on DP2-capable FIXED_VS retimersMichael Strauss1-10/+12
[WHY] Only required if FIXED_VS retimer does not support DP2-capable. [HOW] Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Remove Legacy FIXED_VS Transparent LT SequenceMichael Strauss5-362/+1
The New sequence has been in use in DCN314 with no regressions introduced. Therefore, it is safe to enable this sequence for all devices using FIXED_VS retimers. So, remove the legacy codepath and its associated config flag. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: add panel_power_savings sysfs entry to eDP connectorsHamza Mahfooz1-0/+78
We want programs besides the compositor to be able to enable or disable panel power saving features. However, since they are currently only configurable through DRM properties, that isn't possible. So, to remedy that issue introduce a new "panel_power_savings" sysfs attribute. v2: squash in fix from Hamza (Alex) Cc: Mario Limonciello <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'Srinivasan Shanmugam1-10/+14
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-07drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'Srinivasan Shanmugam1-19/+20
'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'Srinivasan Shanmugam1-1/+1
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the code is trying to access an element of the dc->links array that is beyond its bounds. In C, arrays are zero-indexed, so an array with 12 elements has valid indices from 0 to 11. Trying to access dc->links[12] would be an attempt to access the 13th element of a 12-element array, which is a buffer overflow. To fix this, ensure that the loop does not go beyond the last valid index when accessing dc->links[i + 1] by subtracting 1 from the loop condition. This would ensure that i + 1 is always a valid index in the array. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12 Fixes: 59f1622a5f05 ("drm/amd/display: Add dpia display mode validation logic") Cc: PeiChen Huang <[email protected]> Cc: Aric Cyr <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Meenakshikumar Somasundaram <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'Srinivasan Shanmugam1-0/+4
Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Alex Hung <[email protected]> Cc: Alex Deucher <[email protected]> Reported-by: Julia Lawall <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size") Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Fix dcn35 8k30 Underflow/Corruption IssueFangzhi Zuo2-18/+13
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Underflow workaround by increasing SR exit latencyNicholas Susanto2-18/+18
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by: Chaitanya Dhere <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Susanto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: fix incorrect mpc_combine array sizeWenjing Liu1-1/+1
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Reviewed-by: Chaitanya Dhere <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Fix DPSTREAM CLK on and off sequenceDmytro Laktyushkin2-7/+6
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: fix USB-C flag update after enc10 feature initCharlene Liu2-4/+4
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhzSohaib Nadeem1-1/+1
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Sohaib Nadeem <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31Revert "drm/amd/display: initialize all the dpm level's stutter latency"Charlene Liu1-3/+1
Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'Srinivasan Shanmugam1-1/+1
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the code is trying to access an element of the dc->links array that is beyond its bounds. In C, arrays are zero-indexed, so an array with 12 elements has valid indices from 0 to 11. Trying to access dc->links[12] would be an attempt to access the 13th element of a 12-element array, which is a buffer overflow. To fix this, ensure that the loop does not go beyond the last valid index when accessing dc->links[i + 1] by subtracting 1 from the loop condition. This would ensure that i + 1 is always a valid index in the array. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12 Fixes: 59f1622a5f05 ("drm/amd/display: Add dpia display mode validation logic") Cc: PeiChen Huang <[email protected]> Cc: Aric Cyr <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Meenakshikumar Somasundaram <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-31drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'Srinivasan Shanmugam1-0/+4
Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Alex Hung <[email protected]> Cc: Alex Deucher <[email protected]> Reported-by: Julia Lawall <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size") Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: 3.2.270Aric Cyr1-1/+1
- Add control flag for IPS residency profiling - Populate invalid split index to be 0xF - Fix dcn35 8k30 Underflow/Corruption Issue - Fix DP audio settings - Use correct phantom pipe when populating subvp pipe info - Fix incorrect mpc_combine array size - Fix DPSTREAM CLK on and off sequence - Fix USB-C flag update after enc10 feature init - Add debugfs disallow edp psr - Unify optimize_required flags and VRR adjustments - Increased min_dcfclk_mhz and min_fclk_mhz - Fix static screen event mask definition change Reviewed-by: Tom Chung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: [FW Promotion] Release 0.0.202.0Anthony Koo1-1/+7
- Add control flag for IPS residency profiling Reviewed-by: Tom Chung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Populate invalid split index to be 0xFAlvin Lee1-2/+2
[why] There exists scenarios where the split index for subvp can be pipe index 0. The assumption in FW is that the split index won't be 0 but this is incorrect. [how] Instead populate non-split cases to be 0xF to differentiate between split and non-split. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix dcn35 8k30 Underflow/Corruption IssueFangzhi Zuo2-18/+13
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: clkmgr unittest with removal of warn & rename DCN35 ips ↵Mounika Adhuri1-4/+4
handshake for idle [why] To Remove warnings of clk_mgr. [How] Added code to remove warnings by resolving redefinations. Reviewed-by: Martin Leung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Mounika Adhuri <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix DP audio settingsCharlene Liu1-2/+7
[why] Audio channel layout for 5.1ch is not correct [how] Add the audio layout for 5.1ch (channel_count = 6). Add divided by zero check. Reviewed-by: Zhan Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Underflow workaround by increasing SR exit latencyNicholas Susanto2-18/+18
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by: Chaitanya Dhere <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Susanto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: use correct phantom pipe when populating subvp pipe infoWenjing Liu1-1/+2
[why] In current code, we recognize a pipe as a phantom pipe if it references the same phantom stream. However it can also a phantom split pipe. If the phantom split pipe has a smaller pipe index than the phantom pipe we will mistakenly use the phantom split pipe as the phantom pipe. This causes an incorrect subvp configuration where the first half of the screen is flashing solid white image. [how] Add additional check that the pipe needs to be an OTG master pipe. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix incorrect mpc_combine array sizeWenjing Liu1-1/+1
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Reviewed-by: Chaitanya Dhere <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix DPSTREAM CLK on and off sequenceDmytro Laktyushkin2-7/+6
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix invalid reg access on DCN35 FPGAEric Yang2-4/+23
[Why] Unguarded SMU and CLK IP access cause issue on FPGA [How] Guard them for FPGA environment Reviewed-by: Sung joon Kim <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Eric Yang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: refine code for dmcub inbox1 ring buffer debugFudongwang2-9/+5
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Fudongwang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Send DTBCLK disable message on first commitTaimur Hassan1-0/+1
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: fix USB-C flag update after enc10 feature initCharlene Liu2-4/+4
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: add debugfs disallow edp psrHersen Wu4-2/+67
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by: Wayne Lin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: For FPO and SubVP/DRR configs program vmin/max selAlvin Lee9-25/+56
[Why & How] For FPO and SubVP/DRR cases we need to ensure to program OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP / DRR cases will not have any effect and we could hit underflow / corruption. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Unify optimize_required flags and VRR adjustmentsAric Cyr5-17/+10
[why] There is only a single call to dc_post_update_surfaces_to_stream so there is no need to have two flags to control it. Unifying this to a single flag allows dc_stream_adjust_vmin_vmax to skip actual programming when there is no change required. [how] Remove wm_optimze_required flag and set only optimize_required in its place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing range matches the requested one and skip programming if they are equal. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhzSohaib Nadeem1-1/+1
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Sohaib Nadeem <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Wait for mailbox ready when powering up DMCUBNicholas Kazlauskas1-2/+11
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Wait before sending idle allow and after idle disallowNicholas Kazlauskas1-1/+6
[Why] We want acknowledgment of the driver idle disallow from DMCUB before continuing with any further programming. For idle allow we want to minimize the chance of DMCUB actively interacing with other firmware components on the system (eg. PMFW) at the same time. [How] Ensure that DMCUB isn't in the middle of processing other command submissions prior to allowing idle and after disallowing idle by inserting a wait before the allow and by changing the wait type for the idle disallow. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Revert "drm/amd/display: initialize all the dpm level's stutter latency"Charlene Liu1-3/+1
Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix static screen event mask definition changeYiling Chen10-27/+28
[why] The static screen event mask definition is different betwnn DCN31 after and before. [how] Rename DCN30_set_static_screen_control to DCN31. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Yiling Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Introduce a simple contribution list for display codeRodrigo Siqueira1-110/+0
This commit adds a contribution list for display under the kernel documentation with some first suggestions. It also drops an old TODO list from the display folder. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add entry for the DIO componentRodrigo Siqueira1-0/+10
Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add entry for OPP in the kernel docRodrigo Siqueira1-0/+16
Introduce OPP as part of the kernel documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add kernel doc entry for MPCRodrigo Siqueira1-77/+173
This commit adds a kernel-doc entry for the MPC block. Since it enabled the kernel-doc to parse some of the documentation in the mpc.h file, fixing some of the comments was required. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add kernel doc entry for DPPRodrigo Siqueira1-0/+25
This commit introduces basic DPP information and the struct scan for code documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29drm/amd/display: Fix potential NULL pointer dereferences in ↵Srinivasan Shanmugam1-2/+5
'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) Fixes: ddef02de0d71 ("drm/amd/display: add null checks before logging") Cc: Wyatt Wood <[email protected]> Cc: Anthony Koo <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add simple doc page for DCHUBBUBRodrigo Siqueira1-0/+6
Enable the documentation to extract code documentation from dchubbub.h file. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-29Documentation/gpu: Add basic page for HUBPRodrigo Siqueira1-1/+12
Create the HUBP documentation page and add the doc references to extract the HUBP code documentation. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Christian König <[email protected]> Cc: Aurabindo Pillai <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li1-1/+2
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li1-1/+4
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <[email protected]> Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.