aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21drm/amd/display: Fix incorrect variable nameWesley Chalmers1-1/+1
[WHY] extended_end_address can only be calculated from the extended_address and extended_size Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Ashley Thomas <[email protected]> Acked-by: Bindu Ramamurthy <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-21drm/amd/display: Clear lane settings after LTTPRs have been trainedMartin Tsai1-0/+4
[Why] The voltage swing has to start from the minimum level when transmit TPS1 over Main-Link in clock recovery sequence. The lane settings from current design will inherit the existing VS/PE values that could be adjusted by Repeater X, and to use the adjusted voltage swing level in Repeater X-1 or DPRX could violate DP specs. [How] To reset VS from lane settings after LTTPRs have been trained to meet the requirement. Signed-off-by: Martin Tsai <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Bindu Ramamurthy <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-21drm/amd/display: Clamp VStartup value at DML calculations timeNikola Cornij1-0/+4
[why] Some timings with a large VBlank cause the value to overflow the register related, while also producing other wrong values in DML output. [how] Clamp VStartup at the DCN3.1 maximum value Signed-off-by: Nikola Cornij <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Bindu Ramamurthy <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-21drm/amd/display: Multiplane cursor position incorrect when plane rotatedAric Cyr1-4/+11
[Why] When video plane is rotate the cursor position is incorrect and not matching the desktop location. [How] When a plane is rotated 90 or 270 degrees, the src_rect.width and height should be swapped when determining the scaling factor compared to the dst_rect. Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Bindu Ramamurthy <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/display: Fix duplicated argumentWan Jiabing1-1/+1
Fix coccicheck warning: ./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c: 55:12-42: duplicated argument to && or || Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: Remove the repeated dpp1_full_bypass declarationShaokun Zhang1-2/+0
Function 'dpp1_full_bypass' is declared twice, so remove the repeated declaration and unnessary blank line. Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Shaokun Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: Fix fall-through warning for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough: rivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:672:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] case AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER: ^ Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: remove unused variable 'dc'Pu Lehui1-2/+0
GCC reports the following warning with W=1: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:70:13: warning: variable ‘dc’ set but not used [-Wunused-but-set-variable] 70 | struct dc *dc = NULL; | ^~ This variable is not used in function, this commit remove it to fix the warning. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: Fix gcc unused variable warningPu Lehui1-0/+4
GCC reports the following warning with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3635:17: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 3635 | enum dc_status status = DC_ERROR_UNEXPECTED; | ^~~~~~ The variable should be used for error check, let's fix it. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: Add Freesync video documentationRodrigo Siqueira1-0/+30
Recently, we added support for an experimental feature named Freesync video; for more details on that, refer to: commit 6f59f229f8ed ("drm/amd/display: Skip modeset for front porch change") commit d10cd527f5e5 ("drm/amd/display: Add freesync video modes based on preferred modes") commit 0eb1af2e8205 ("drm/amd/display: Add module parameter for freesync video mode") Nevertheless, we did not document it in detail in our driver. This commit introduces a kernel-doc and expands the module parameter description. Cc: Aurabindo Pillai <[email protected]> Cc: Sean Paul <[email protected]> Cc: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Reviewed by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-18drm/amd/display: Increase stutter watermark for dcn302 and dcn303Aurabindo Pillai2-4/+4
[Why] Current watermarks end up programming lowers watermarks which results in screen flickering and underflow for certain modes like 1440p. [How] Add 11us to stutter exit & stutter enter plus exit watermark. Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm: display: Fix duplicate field initialization in dcn31Wan Jiabing1-1/+0
Fix the following coccicheck warning: drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c:917:56-57: pstate_enabled: first occurrence line 935, second occurrence line 937 Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Extend AUX timeout for DP initial readsWesley Chalmers1-4/+3
[WHY] DP LL Compliance tests require that the first DPCD transactions after a hotplug have a timeout interval of 3.2 ms. In cases where LTTPR is disabled, this means that the first reads from DP_SET_POWER and DP_DPCD_REV must have an extended timeout. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Cover edge-case when changing DISPCLK WDIVIDERWesley Chalmers3-6/+69
[WHY] When changing the DISPCLK_WDIVIDER value from 126 to 127, the change in clock rate is too great for the FIFOs to handle. This can cause visible corruption during clock change. HW has handed down this register sequence to fix the issue. [HOW] The sequence, from HW: a. 127 -> 126 Read DIG_FIFO_CAL_AVERAGE_LEVEL FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4 Set DCCG_FIFO_ERRDET_OVR_EN = 1 Write 1 to OTGx_DROP_PIXEL for (N-4) times Set DCCG_FIFO_ERRDET_OVR_EN = 0 Write DENTIST_DISPCLK_RDIVIDER = 126 Because of frequency stepping, sequence a can be executed to change the divider from 127 to any other divider value. b. 126 -> 127 Read DIG_FIFO_CAL_AVERAGE_LEVEL FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4 Set DCCG_FIFO_ERRDET_OVR_EN = 1 Write 1 to OTGx_ADD_PIXEL for (12-N) times Set DCCG_FIFO_ERRDET_OVR_EN = 0 Write DENTIST_DISPCLK_RDIVIDER = 127 Because of frequency stepping, divider must first be set from any other divider value to 126 before executing sequence b. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Add interface to get Calibrated Avg Level from FIFOWesley Chalmers6-0/+56
[WHY] Hardware has handed down a new sequence requiring the value of this register be read from clk_mgr. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Partition DPCD address space and break up transactionsWesley Chalmers1-2/+85
[WHY] SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a single AUX transaction. There may be other places in future where breaking up AUX accesses is necessary. [HOW] Partition the entire DPCD address space into blocks. When an incoming AUX request spans multiple blocks, break up the request into multiple requests. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Do not count I2C DEFERs with AUX DEFERsWesley Chalmers1-1/+2
[WHY] DP 2.0 SCR specifies that "A DPTX shall distinguish I2C_DEFER|AUX_ACK from AUX_DEFER. AUX retries due to I2C_DEFER are not counted as part of minimum 7 retires (sic) upon AUX_DEFER’s" Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: 7 retries + 50 ms timeout on AUX DEFERWesley Chalmers1-3/+15
[WHY] DP 2.0 SCR specifies that TX devices must retry at least 7 times when receiving an AUX DEFER reply from RX. In addition, the specification states that the TX shall not retry indefinitely, and gives a suggestive timeout interval of 50ms. [HOW] Keep retrying until both 7 or more retries have been made, and the 50ms interval has passed. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Rename constantWesley Chalmers1-3/+3
[WHY] 7 is the minimum number of retries TX must attempt on an AUX DEFER, not the maximum. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Enforce DPCD Address rangesWesley Chalmers11-45/+162
[WHY] Some DPCD addresses, notably LTTPR Capability registers, are expected to be read all together in a single DPCD transaction. Rather than force callers to read registers they don't need, we want to quietly extend the addresses read, and only return back the values the caller asked for. This does not affect DPCD writes. [HOW] Create an additional layer above AUX to perform 'checked' DPCD transactions. Iterate through an array of DPCD address ranges that are marked as being contiguous. If a requested read falls within one of those ranges, extend the read to include the entire range. After DPCD has been queried, copy the requested bytes into the caller's data buffer, and deallocate all resources used. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Improve logic for is_lttpr_presentWesley Chalmers1-2/+1
[WHY] DP specifies that an LTTPR device is only present if PHY_REPEATER_CNT is 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01. All other values should be considered no LTTPRs present. [HOW] Function dp_convert_to_count already does this check. Use it to determine if PHY_REPEATER_CNT is a valid LTTPR count. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Always write repeater mode regardless of LTTPRWesley Chalmers1-4/+3
[WHY] SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01. [HOW] Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is requested. Write Transparent in all other cases. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Set LTTPR Transparent Mode after read link capWesley Chalmers1-2/+3
[WHY] SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent mode after reading LTTPR Capability registers on HPD. The wording of the SCR is somewhat ambiguous as to whether Transparent mode must be set explicity, or is implicitly set on LTTPR capability read. Explicitly setting Transparent mode after LTTPR capability read should cover all cases. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Read LTTPR caps first on bootupWesley Chalmers3-0/+8
[WHY] SCR for DP 2.0 requires that LTTPR caps be read first on hotplug. For the sake of consistency, this should also be the case on bootup. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Move LTTPR cap read into its own functionWesley Chalmers1-34/+41
[WHY] We want LTTPR capabilities to be readable from more places than just retrieve_link_cap Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Read LTTPR caps first on hotplugWesley Chalmers1-32/+33
[WHY] A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing read from DPCD upon hotplug. Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: move psr dm interface to separate filesRoman Li4-137/+205
[Why] Improve the maintain/read abilities of dm code. [How] Create amdgpu_dm_psr.c/h files. Move psr function from amdgpu_dm.c Signed-off-by: Roman Li <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: 3.2.140Aric Cyr1-1/+1
This version brings along following fixed: - LTTPR improvements - Backlight improvements - eDP hotplug detection Signed-off-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: [FW Promotion] Release 0.0.70Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Updated variable name.David Galiffi1-6/+6
[Why] Fixed spelling error. [How] Changed "currnet_setting" to "current_setting". Signed-off-by: David Galiffi <[email protected]> Reviewed-by: Wesley Chalmers <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Change swizzle visual confirm reference pipePo-Ting Chen1-5/+5
[Why] To change the swizzle visual confirm reference pipe from top pipe to bottom pipe due to bottom pipe information would be more important for multiple overlay case. Signed-off-by: Po-Ting Chen <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: dp mst detection code refactorWenjing Liu2-96/+70
[why] Move mst start top mgr in dc_link_detect layer. Remove unused same_dpcd variable. Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY to the proper header for defining dc link internal constant. Signed-off-by: Wenjing Liu <[email protected]> Reviewed-by: George Shen <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: tune backlight ramping profilesJosip Pavic1-10/+10
[Why & How] Tune backlight ramping profiles for each Vari-Bright level to suit customer preferences Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: add config option for eDP hotplug detectionYi-Ling Chen2-4/+7
[Why] Some custom platforms use eDP hotplug events to notify panel capability changes that should be reported [How] Add a DC config option that unblocks eDP hotplug events Signed-off-by: Yi-Ling Chen <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: add DMUB registers to crash dump diagnostic data.Ashley Thomas11-9/+238
[WHY] Ability to triage DMCUB is improved with availability of certain dmub registers not currently captured in crash dump diagnostic data. [HOW] Add dmub registers to diagnostic data collection. Thanks Nicholas Kazlauskas for awesome input on this! Signed-off-by: Ashley Thomas <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amd/display: Remove unnecessary blank linesDmytro Laktyushkin1-2/+0
cleanup Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_checkMark Yacoub3-6/+40
For each CRTC state, check the size of Gamma and Degamma LUTs so unexpected and larger sizes wouldn't slip through. TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes v2: fix assignments in if clauses, Mark's email. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Mark Yacoub <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-11drm/amd/display: add dummy PG callback for beige gobyAurabindo Pillai3-0/+7
[Why&How] PG registers are absent in beige goby, so programming these registers generate call trace. Fix this by adding a dummy function in dcn303 initialization function which prevents writing to non existant registers. Fixes: cd6d421e3d1ad5 ("drm/amd/display: Initial DC support for Beige Goby") Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm: display: Remove duplicated argument in dcn31Wan Jiabing1-2/+2
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c: 3539:12-42: duplicated argument to && or || ./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c: 5677:87-123: duplicated argument to && or || Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm: display: Remove duplicate include in dce110Wan Jiabing1-1/+0
Fix the following checkincludes.pl warning: ./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c 35 #include "dce110_hw_sequencer.h" 69 #include "dce110_hw_sequencer.h" Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/display: use ARRAY_SIZE for base60_refresh_ratesJiapeng Chong1-1/+1
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element. Clean up the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/core/dc_resource.c:448:47-48: WARNING: Use ARRAY_SIZE. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10drm/amd/display: Fix duplicate included clk_mgr.hJiapeng Chong1-1/+0
Clean up the following includecheck warning: ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c: clk_mgr.h is included more than once. No functional change. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-10Merge tag 'amd-drm-next-5.14-2021-06-09' of ↵Dave Airlie134-442/+20234
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-06-09: amdgpu: - SR-IOV fixes - Smartshift updates - GPUVM TLB flush updates - 16bpc fixed point display fix for DCE11 - BACO cleanups and core refactoring - Aldebaran updates - Initial Yellow Carp support - RAS fixes - PM API cleanup - DC visual confirm updates - DC DP MST fixes - DC DML fixes - Misc code cleanups and bug fixes amdkfd: - Initial Yellow Carp support radeon: - memcpy_to/from_io fixes UAPI: - Add Yellow Carp chip family id Used internally in the kernel driver and by mesa Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-10Merge tag 'drm-misc-next-2021-06-09' of ↵Dave Airlie1-3/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.14: UAPI Changes: * drm/panfrost: Export AFBC_FEATURES register to userspace Cross-subsystem Changes: * dma-buf: Fix debug printing; Rename dma_resv_*() functions + changes in callers; Cleanups Core Changes: * Add prefetching memcpy for WC * Avoid circular dependency on CONFIG_FB * Cleanups * Documentation fixes throughout DRM * ttm: Make struct ttm_resource the base of all managers + changes in all users of TTM; Add a generic memcpy for page-based iomem; Remove use of VM_MIXEDMAP; Cleanups Driver Changes: * drm/bridge: Add TI SN65DSI83 and SN65DSI84 + DT bindings * drm/hyperv: Add DRM driver for HyperV graphics output * drm/msm: Fix module dependencies * drm/panel: KD53T133: Support rotation * drm/pl111: Fix module dependencies * drm/qxl: Fixes * drm/stm: Cleanups * drm/sun4i: Be explicit about format modifiers * drm/vc4: Use struct gpio_desc; Cleanups * drm/vgem: Cleanups * drm/vmwgfx: Use ttm_bo_move_null() if there's nothing to copy * fbdev/mach64: Cleanups * fbdev/mb862xx: Use DEVICE_ATTR_RO Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YMBw3DF2b9udByfT@linux-uq9g
2021-06-08drm/amd/display: 3.2.139Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/display: [FW Promotion] Release 0.0.69Wyatt Wood1-2/+2
Signed-off-by: Wyatt Wood <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/display: Add swizzle visual confirm modePo-Ting Chen5-1/+29
[Why] To support a new visual confirm mode: swizzle to show the specific color at the screen border according to different surface swizzle mode. Currently we only support the Linear mode with red color. Signed-off-by: Po-Ting Chen <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/display: force CP to DESIRED when removing displayDingchen (David) Zhang1-1/+14
[WHY] - Commit from userspace could cause link stream to disable and hdcp auth to reset when the HDCP has already been enabled at the moment. CP should fall back to DESIRED from ENABLED in such cases. - This change was previously reverted due to a regression caused, which has now been cleared. [HOW] In hdcp display removal, change CP to DESIRED if at the moment CP is ENABLED before the auth reset and removal of linked list element. Signed-off-by: Dingchen (David) Zhang <[email protected]> Signed-off-by: Qingqing Zhuo <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/display: Updates for ODM Transition TestEric Bernstein1-1/+0
[Why] There is an assert in cases where transition from ODM 2:1 to ODM 1:1 (bypass) [How] Remove assert since this case is now valid. Update diags tests for ODM transitions. Signed-off-by: Eric Bernstein <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-08drm/amd/display: Revert "Disconnect non-DP with no EDID"Roy Chan1-18/+0
[Why] Found a use case (IPKVM) that DP-VGA active dongle does not return any EDID and the mentioned commit broke it. [How] This reverts "Disconnect non-DP with no EDID" Signed-off-by: Roy Chan <[email protected]> Reviewed-by: Chris Park <[email protected]> Acked-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.